Finite-element supported transmission-line models for calculating high-frequency effects in machine windings

IEEE Transactions on Magnetics

Volumn 48, Issue 2, 2012, Pages 787-790

  De Gersem, Herbert ^a   Muetze, Annette ^b  

^a UNIVERSITY OF LEUVEN   (Belgium)

^b GRAZ UNIVERSITY OF TECHNOLOGY   (Austria)

Author keywords

Electric machines; finite element methods; transmission line modeling

Indexed keywords

ELECTRIC LINES; ELECTRIC MACHINERY; ELECTROMAGNETIC WAVE EMISSION; FINITE ELEMENT METHOD; MACHINE WINDINGS; MAXWELL EQUATIONS; TRANSMISSION LINE THEORY; TRANSMISSIONS; WAVE PROPAGATION; WINDING;

COMMON MODE CURRENTS; ELECTROQUASISTATICS; HIGH-FREQUENCY EFFECTS; IMPEDANCE MISMATCH; INTER-WIRE COUPLING; TRANSMISSION LINE MODELING; TRANSMISSION LINE MODELS; WAVE PROPAGATION DIRECTION;

ELECTRIC MACHINE THEORY;

EID: 84856376861     PISSN: 00189464     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMAG.2011.2172197     Document Type: Article

References (27)

1. M. Kaufhold, H. Auinger,M. Berth, J. Speck, and M. Eberhardt, "Electrical stress and failure mechanism of the winding insulation in PWMinverter- fed low-voltage induction motors," IEEE Trans. Ind. Electron., vol. 47, no. 2, pp. 396-402, Apr. 2000.
2. G. Skibinski, R. Kerkman, D. Leggate, J. Pankau, and D. Schlegel, "Reflected wave modeling techniques for PWM AC motor drives," in IEEE Applied Power Electronics Conf., Anaheim, CA, Feb. 1998, pp. 1021-1029.
3. S. Ogasawara and H. Akagi, "Modeling and damping of high-frequency leakage currents in PWM inverter-fed AC motor drive systems," IEEE Trans. Ind. Appl., vol. 32, no. 5, pp. 29-36, September/October 1996.
4. O. Magdun, A. Binder, A. Rocks, and O. Henze, "Prediction of common mode ground current in motors of inverter-based drive systems," in Proc. Electromotion & ACEMP 2007, Bodrum, Turkey, Sep. 2007, pp. 824-830.
5. C. Petrarca, A. Maffucci, V. Tucci, and M. Vitelli, "Analysis of the voltage distribution in a motor stator winding subjected to steep-fronted surge voltages by means of a multiconductor lossy transmission line model," IEEE Trans. Energy Convers., vol. 19, no. 1, pp. 7-17, Mar. 2004.
6. G. Lupo, C. Petrarca, M. Vitelli, and V. Tucci, "Multiconductor transmission line analysis of steep-front surges in machine windings," IEEE Trans. Diel. Elec. Insul., vol. 9, no. 3, pp. 467-478, Jun. 2002.
7. L. Wang, C. Ho, F. Canales, and J. Jatskevich, "High-frequency modeling of the long-cable-fed induction motor drive system using TLM approach for predicting overvoltage transients," IEEE Trans. Power Syst., vol. 25, no. 10, pp. 2653-2664, Oct. 2010.
8. B. Bolsens, K. De Brabandere, J. Van den Keybus, J. Driesen, and R. Belmans, "Transmission line effects on motor feed cables," in Proc. IEMDC, Madison, WI, Jun. 2003, pp. 1866-1872.
9. J. Brandão Faria, Multiconductor Transmission-Line Structures. New York: Wiley, 1993.
10. S. Celozzi and M. Feliziani, "Time-domain solution of field-excited multiconductor transmission line equations," IEEE Trans. Electromagn. Compat., vol. 37, no. 3, pp. 421-432, Aug. 1995.
11. A. Cheldavi, M. Kamarei, and S. Naeini, "Analysis of coupled transmission lines with power-law characteristic impedance," IEEE Trans. Electromagn. Compat., vol. 42, no. 3, pp. 308-312, Aug. 2000.
12. J. Arrillaga and N.Watson, Power Systems Electromagnetic Transients Simulation, ser. IEE Power & Energy Series: IET, 2002, vol. 39.
13. C. Paul, Analysis of Multiconductor Transmission Lines, 2nd ed. New York: Wiley Blackwell, 2007.
14. G. Lei, G. Pan, and B. Gilbert, "Examination, clarification, and simplification of modal decoupling method for multiconductor transmission lines," IEEE Trans. Microw. Theory Tech., vol. 43, no. 9, pp. 2090-2099, Sep. 1995.
15. H. De Gersem, O. Henze, T. Weiland, and A. Binder, "Simulation of wave propagation effects in machine windings," COMPEL, vol. 29, no. 1, pp. 23-38, 2010.
16. A. Konrad, "Eddy currents and modelling," IEEE Trans. Magn., vol. MAG-21, no. 5, pp. 1805-1810, Sep. 1985.
17. S. Yuferev and N. Ida, "Selection of the surface impedance boundary conditions for a given problem," IEEE Trans. Magn., vol. 35, no. 3, pp. 1486-1489, May 1999.
18. L. Di Rienzo, S. Yuferev, and N. Ida, "Computation of the impedance matrix of multiconductor transmission lines using high-order surface impedance boundary conditions," IEEE Trans. Electromagn. Compat., vol. 50, no. 4, pp. 974-984, Nov. 2008.
19. H. De Gersem, O. Henze, T. Weiland, and A. Binder, "Eddy-current formulation for constructing transmission-line models for machine windings," Eur. Phys. J.-Appl. Phys., vol. 49, 2010, 7 pages, article 31101.
20. L. Di Rienzo, S. Yuferev, and N. Ida, "Computation of the impedance matrix of multiconductor transmission lines using high-order surface impedance boundary conditions," IEEE Trans. Electromag. Compat., vol. 50, no. 4, pp. 974-984, Nov. 2008.
21. P. Mäki-Ontto and J. Luomi, "Circumferential flux as a source of bearing current of converter-fed AC machines," in Proc. NORPIE, Stockholm, Sweden, 2002.
22. H. De Gersem and A. Muetze, "Simulation of electric machine common-mode impedance using a combined TL-FE-analytic model," in Computer Field Models of Electromagnetic Devices, ser. Studies in Applied Electromagnetics and Mechanics, S. Wiak and E. Napieralska- Juszczak, Eds. Amsterdam: IOS Press, 2010, vol. 34, pp. 228-234.
23. P. Mäki-Ontto and J. Luomi, "Common-mode flux calculation of AC machines," presented at the Proc. ICEM, Brugge, Belgium, Aug. 2002, paper No. 549, 6 pages on CD-ROM.
24. A. Muetze, H. De Gersem, and T. Weiland, "Influence of teeth and cooling ducts on the HF common mode flux of inverter-fed AC machines," in Proc. IEEE Ind. Appl. Soc. 40th Ann. Meet., Kowloon, Hong Kong, Oct. 2005, 7 pages on CD ROM.
25. H. Jorks, E. Gjonaj, and T.Weiland, "Simulation of an induction motor including eddy-current effects in core laminations," in CEM,Wroclaw, Poland, Apr. 2011, pp. 54-55.
26. G. Bedrosian, M. Chari, M. Shah, and G. Theodossiou, "Axiperiodic finite element analysis of generator end regions, part I-Theory," IEEE Trans. Magn., vol. 25, no. 4, pp. 3067-3069, Jul. 1989.
27. G. Bedrosian, M. Chari, A. deBlois, M. Palmo, M. Shah, and G. Theodossiou, "Axiperiodic finite element analysis of generator end regions, part II-Application," IEEE Trans. Magn., vol. 25, no. 4, pp. 3070-3072, Jul. 1989.