Functionalized carbon nanotube reinforced scaffolds for bone regenerative engineering: Fabrication, in vitro and in vivo evaluation

Biomedical Materials (Bristol)

Volumn 9, Issue 3, 2014, Pages

  Mikael, Paiyz E ^a,b,c   Amini, Ami R ^a,c   Basu, Joysurya ^b   Arellano Jimenez, M Josefina ^b   Laurencin, Cato T ^a,b,c   Sanders, Mary M ^a   Carter, C Barry ^b   Nukavarapu, Syam P ^a,b,c  

^a UNIVERSITY OF CONNECTICUT HEALTH CENTER   (United States)

^b UNIVERSITY OF CONNECTICUT   (United States)

^c Raymond and Beverly Sackler Ctr for Biomed Biological Physical and Engineering Sciences Center   (United States)

Author keywords

composite scaffolds; functionalized carbon nanotubes; in vivo tissue compatibility; mechanical reinforcement; PLGA

Indexed keywords

BEARINGS (MACHINE PARTS); BIOMECHANICS; BONE; CELL ADHESION; COMPRESSIVE STRENGTH; COPOLYMERS; MECHANICAL PROPERTIES; MICROSPHERES; REPAIR; SCANNING ELECTRON MICROSCOPY; TISSUE;

COMPOSITE SCAFFOLDS; FUNCTIONALIZED CARBON NANOTUBES; IN-VIVO; MECHANICAL REINFORCEMENT; PLGA;

SCAFFOLDS (BIOLOGY);

CARBOXYLIC ACID; HYDROXYAPATITE; HYDROXYL GROUP; MICROSPHERE; MULTI WALLED NANOTUBE; POLYGLACTIN; BIOMATERIAL; CARBON NANOTUBE; LACTIC ACID; POLYGLYCOLIC ACID; POLYLACTIC ACID-POLYGLYCOLIC ACID COPOLYMER;

ANIMAL CELL; ANIMAL EXPERIMENT; ARTICLE; BIOCOMPATIBILITY; BIOMECHANICS; BIOMINERALIZATION; BONE REGENERATION; BONE REMODELING; BONE TISSUE; CELL ADHESION; CELL INFILTRATION; CELL PROLIFERATION; CELL VIABILITY; COMPRESSIVE STRENGTH; CONTROLLED STUDY; CYTOTOXICITY; HISTOCOMPATIBILITY; IN VITRO STUDY; IN VIVO STUDY; INFLAMMATION; INFLAMMATORY CELL; MOUSE; NANOFABRICATION; NONHUMAN; RAT; SCANNING ELECTRON MICROSCOPY; TISSUE ENGINEERING; TRABECULAR BONE; YOUNG MODULUS; 3T3 CELL LINE; ANIMAL; BIODEGRADABLE IMPLANT; BODY FLUID; BONE DEVELOPMENT; CELL SURVIVAL; CHEMISTRY; CYTOLOGY; DEVICE FAILURE ANALYSIS; DEVICES; EQUIPMENT DESIGN; MALE; MATERIALS TESTING; OSTEOBLAST; PHYSIOLOGY; SPRAGUE DAWLEY RAT; SYNTHESIS; TISSUE SCAFFOLD; ULTRASTRUCTURE;

3T3 CELLS; ABSORBABLE IMPLANTS; ANIMALS; BIOCOMPATIBLE MATERIALS; BODY FLUIDS; BONE REGENERATION; CELL PROLIFERATION; CELL SURVIVAL; COMPRESSIVE STRENGTH; ELASTIC MODULUS; EQUIPMENT DESIGN; EQUIPMENT FAILURE ANALYSIS; LACTIC ACID; MALE; MATERIALS TESTING; MICE; NANOTUBES, CARBON; OSTEOBLASTS; OSTEOGENESIS; POLYGLYCOLIC ACID; RATS; RATS, SPRAGUE-DAWLEY; TISSUE ENGINEERING; TISSUE SCAFFOLDS;

EID: 84899538239     PISSN: 17486041     EISSN: 1748605X     Source Type: Journal    
DOI: 10.1088/1748-6041/9/3/035001     Document Type: Article

References (49)

1. Langer R and Vacanti J P 1993 Tissue engineering Science 260 920-6 (Pubitemid 23209960)
2. Laurencin C T, Ambrosio A M A, Borden M D and Cooper J A 1999 Tissue engineering: orthopedic applications Ann. Rev. Biomed. Eng. 1 19-46 (Pubitemid 129740004)
3. Laurencin C T and Khan Y 2012 Regenerative engineering Sci. Transl. Med. 4 160ed9
4. Deng M, Nair L S, Nukavarapu S P, Kumbar S G, Jiang T, Weikel A L, Krogman N R, Allcock H R and Laurencin C T 2010 In situ porous structures: a unique polymer erosion mechanism in biodegradable dipeptide-based polyphosphazene and polyester blends producing matrices for regenerative engineering Adv. Funct. Mater. 20 2794-806
5. Rezwan K, Chen Q Z, Blaker J J and Boccaccini A R 2006 Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering Biomaterials 27 3413-31
6. Hutmacher D W 2000 Scaffolds in tissue engineering bone and cartilage Biomaterials 21 2529-43
7. Karande T and Agrawal C 2008 Function and Requirement of Synthetic Scaffolds in Tissue Engineering (Boca Raton, FL: CRC Press)
8. Amini A R, Laurencin C T and Nukavarapu S P 2012 Bone tissue engineering: recent advances and challenges Crit. Rev. Biomed. Eng. 40 363-408
9. Nair L and Laurencin C T 2006 Polymers as biomaterials for tissue engineering and controlled drug delivery Tissue Engineering I: Scaffold Systems for Tissue Engineering ed K Lee and D Kaplan (Berlin: Springer) pp 47-90
10. Liu H and Webster T J 2010 Mechanical properties of dispersed ceramic nanoparticles in polymer composites for orthopedic applications International Journal of Nanomedicine 5 299-313
11. Nawawi N A, Alqap A S F and Sopyan L 2011 Recent progress on hydroxyapatite-based dense biomaterials for load bearing bone substitutes Recent Patents on Materials Science 4 63-80
12. Harrison B S and Atala A 2007 Carbon nanotube applications for tissue engineering Biomaterials 28 344-53 (Pubitemid 44537381)
13. Jell G, Verdejo R, Safinia L, Shaffer M S P, Stevens M M and Bismarck A 2008 Carbon nanotube-enhanced polyurethane scaffolds fabricated by thermally induced phase separation J. Mater. Chem. 18 1865-72 (Pubitemid 351502713)
14. Fan H L, Wang L L, Zhao K K, Li N, Shi Z J, Ge Z G and Jin Z X 2010 Fabrication, mechanical properties, and biocompatibility of graphene-reinforced chitosan composites Biomacromolecules 11 2345-51
15. Demczyk B G, Wang Y M, Cumings J, Hetman M, Han W, Zettl A and Ritchie R O 2002 Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes Mater. Sci. Eng. A 334 173-8 (Pubitemid 34915652)
16. Demczyk B G, Wang Y M, Cumings J, Hetman M, Han W, Zettl A and Ritchie R O 2006 Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes Microsc. Microanal. 12 934
17. Kis A and Zettle A 2008 Nanomechanics of nanotubes Phil. Trans. R. Soc. A 366 1591-611
18. Lahiri D, Rouzaud F, Namin S, Keshri A K, Valdes J J, Kos L, Tsoukias N and Agarwal A 2009 Carbon nanotube reinforced polylactide-caprolactone copolymer: mechanical strengthening and interaction with human osteoblasts in vitro ACS Applied Materials & Interfaces 1 2470-6
19. Singh M K et al 2010 Integrated biomimetic carbon nanotube composites for in vivo systems Nanoscale 2 2855-63
20. Mikael P E and Nukavarapu S P 2011 Functionalized carbon nanotube composite scaffolds for bone tissue engineering: prospects and progress J. Biomater. Tissue Eng. 1 76-85
21. Wick P, Manser P, Limbach L K, Dettlaff-Weglikowska U, Krumeich F, Roth S, Stark W J and Bruinink A 2007 The degree and kind of agglomeration affect carbon nanotube cytotoxicity Toxicol. Lett. 168 121-31 (Pubitemid 46054362)
22. Singh R, Pantarotto D, Lacerda L, Pastorin G, Klumpp C, Prato M, Bianco A and Kostarelos K 2006 Tissue biodistribution and blood clearance rates of intravenously administered carbon nanotube radiotracers Proc. Natl Acad. Sci. USA 103 3357-62 (Pubitemid 43346474)
23. Guo J, Zhang X, Li Q and Li W 2007 Biodistribution of functionalized multiwall carbon nanotubes in mice Nucl. Med. Biol. 34 579-83 (Pubitemid 46963011)
24. Nukavarapu S, Kumbar S, Brown J, Krogman N, Weikel A, Hindenlang M, Nair L, Allcock H and Laurencin C 2008 Polyphosphazenes/nanohydroxyapatite composite microsphere scaffolds for bone tissue engineering Biomacromolecules 9 1818-25
25. Murphy W L and Mooney D J 2002 Bioinspired growth of crystalline carbonate apatite on biodegradable polymer substrata J. Am. Chem. Soc. 124 1910-7 (Pubitemid 34215307)
26. Kokubo T and Takadama H 2006 How useful is SBF in predicting in vivo bone bioactivity Biomaterials 27 2907-15 (Pubitemid 43208916)
27. Ibim S M, Uhrich K E, Bronson R, El-Amin S F, Langer R S and Laurencin C T 1998 Poly(anhydride-co-imides): in vivo biocompatibility in a rat model Biomaterials 19 941-51 (Pubitemid 28327524)
28. Ibim S E M, Uhrich K E, Attawia M, Shastri V R, El-Amin S F, Bronson R, Langer R and Laurencin C T 1998 Preliminary in vivo report on the osteocompatibility of poly(anhydride-co-imides) evaluated in a tibial model J. Biomed. Mater. Res. 43 374-9 (Pubitemid 28544097)
29. Yamaguchi A, Komori T and Suda T 2000 Regulation of osteoblast differentiation mediated by bone morphogenetic proteins, hedgehogs, and Cbfa1 Endocrine Reviews 21 393-411 (Pubitemid 32275586)
30. Yonezawa T et al 2011 Harmine promotes osteoblast differentiation through bone morphogenetic protein signaling Biochem. Biophys. Res. Commun. 409 260-5
31. Amini A R, Adams D J, Laurencin C T and Nukavarapu S P 2012 Optimally porous and biomechanically compatible scaffolds for large-area bone regenaration Tissue Eng Part A 18 1376-88
32. Laurencin C T, Nukavarapu S P and Kumbar S G 2013 Carbon nanotube composite scaffolds for bone tissue engineering US Patent No. 8614189
33. Berndt C C, Brogan J A, Montavon G, Claudon A and Coddet C 1998 Mechanical properties of metal- and ceramic-polymer composites formed via thermal spray consolidation - extended abstract J. Ther. Spray Technol. 7 337-9 (Pubitemid 128495161)
34. 3 composites Composites A 29 323-9
35. Andrews R and Weisenberger M C 2004 Carbon nanotube polymer composites Curr. Opin. Solid State Mater. Sci. 8 31-7 (Pubitemid 38814676)
36. Desai A V and Haque M A 2005 Mechanics of the interface for carbon nanotube-polymer composites Thin-Walled Struct. 43 1787-803 (Pubitemid 41498051)
37. Cho J, Joshi M S and Sun C T 2006 Effect of inclusion size on mechanical properties of polymeric composites with micro and nano particles Compos. Sci. Technol. 66 1941-52 (Pubitemid 44070633)
38. Bal S and Samal S S 2007 Carbon nanotube reinforced polymer composites - a state of the art Bull. Mater. Sci. 30 379-86 (Pubitemid 47347479)
39. Fu S-Y, Feng X-Q, Lauke B and Mai Y-W 2008 Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites Composites B 39 933-61
40. Li X, Gao H, Scrivens W A, Fei D, Xu X, Sutton M A, Reynolds A P and Myrick M L 2007 Reinforcing mechanisms of single-walled carbon nanotube-reinforced polymer composites J. Nanosci. Nanotechnol. 7 2309-17
41. Ajayan P M and Tour J M 2007 Materials science-nanotube composites Nature 447 1066-8
42. Zhang F-H, Wang R-G, He X-D, Wang C and Ren L-N 2009 Interfacial shearing strength and reinforcing mechanisms of an epoxy composite reinforced using a carbon nanotube/ carbon fiber hybrid J. Mater. Sci. 44 3574-7
43. Zhang Q, Mochalin V N, Neitzel I, Hazeli K, Niu J, Kontsos A, Zhou J G, Lelkes P I and Gogotsi Y 2012 Mechanical properties and biomineralization of multifunctional nanodiamond-PLLA composites for bone tissue engineering Biomaterials 33 5067-75
44. Saffar K P, Arshi A R, JamilPour N, Najafi A R, Rouhi G and Sudak L 2010 A cross-linking model for estimating Young's modulus of artificial bone tissue grown on carbon nanotube scaffold J. Biomed. Mater. Res. A 94 594-602
45. Zhang Q, Mochalin V N, Neitzel I, Hazeli K, Niu J, Kontsos A, Zhou J G, Lelkes P I and Gogotsi Y 2012 Mechanical properties and biomineralization of multifunctional nanodiamond-PLLA composites for bone tissue engineering Biomaterials 33 5067-75
46. Wang Y X, Robertson J L, Spillman W B and Claus R O 2004 Effects of the chemical structure and the surface properties of polymeric biomaterials on their biocompatibility Pharm. Res. 21 1362-73 (Pubitemid 39149650)
47. Thevenot P, Hu W and Tang L 2008 Surface chemistry influence implant biocompatibility Curr. Top. Med. Chem. 8 270-80 (Pubitemid 351791022)
48. Kim J E et al 2010 Toxicity and clearance of intratracheally administered multiwalled carbon nanotubes from murine lung J. Toxicol. Environ. Health A 73 1530-43
49. van der Zande M, Junker R, Walboomers X F and Jansen J A 2011 Carbon nanotubes in animal models: a systematic review on toxic potential Tissue Eng. Part B: Rev. 17 57-69