Enhanced oil-water separation using polysulfone membranes modified with polymeric additives

Desalination

Volumn 344, Issue , 2014, Pages 280-288

  Pagidi, Aruna ^a   Saranya, R ^a   Arthanareeswaran, G ^a   Ismail, A F ^b   Matsuura, T ^b,c  

^a NATIONAL INSTITUTE OF TECHNOLOGY   (India)

^b UNIVERSITI TEKNOLOGI MALAYSIA   (Malaysia)

^c UNIVERSITY OF OTTAWA   (Canada)

Author keywords

Additives; Fouling resistance; Oil water mixture; Polysulfone; Ultrafiltration

Indexed keywords

ADDITIVES; MIXTURES; POLYMERS; POLYSULFONES; SCANNING ELECTRON MICROSCOPY; SEPARATION; ULTRAFILTRATION;

CONCENTRATION POLARISATION; CONTACT ANGLE ANALYSIS; FOULING RESISTANCE; N-METHYL-2-PYRROLIDONE; OIL-WATER MIXTURE; PHASE-INVERSION METHOD; POLYETHYLENE GLYCOL (PEG); POLYSULFONE (PSF) MEMBRANES;

MEMBRANES;

CONCENTRATION (COMPOSITION); FOULING; MEMBRANE; OIL; PERMEABILITY; POLYMER; SCANNING ELECTRON MICROSCOPY; ULTRAFILTRATION; WATER;

EID: 84899069323     PISSN: 00119164     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.desal.2014.03.033     Document Type: Article

References (45)

1. McCloskey B.D., Ju H., Freeman B.D. Composite membranes based on a selective chitosan-poly(ethylene glycol) hybrid layer: synthesis, characterization, and performance in oil-water purification. Ind. Eng. Chem. Res. 2010, 49:366-373.
2. Morales Chabrand R., Kim H.J., Zhang C., Glatz C.E., Jung S. Destabilization of the mixture formed during aqueous extraction of soybean oil. J. Am. Oil Chem. Soc. 2008, 85:383-390.
3. Cambiella A., Benito J.M., Pazos C., Coca J. Interfacial properties of oil-in-water mixtures designed to be used as metalworking fluids. Colloids Surf. A Physicochem. Eng. Asp. 2007, 305:112-119.
4. Honga A., Fane A.G., Burford R. Factors affecting membrane coalescence of stable oil-in-water mixtures. J. Membr. Sci. 2003, 222:19-39.
5. El-Kayar A., Hussein M., Zatout A.A., Hosny A.Y., Amer A.A. Removal of oil from stable oil-water mixture by induced air floatation technique. Technology 1993, 3:25-31.
6. Zhou Y.B., Chen L., Hu X.M., Lu J. Modified resin coalescer for oil-in-water mixture treatment: effect of operating conditions on oil removal performance. Ind. Eng. Chem. Res. 2009, 48:1660-1664.
7. Canizares P., Martinez F., Lobato J., Rodrigo M.A. Break-up of oil-in-water mixtures by electrochemical techniques. J. Hazard. Mater. 2007, 145:233-240.
8. Peterson R.J. Composite reverse osmosis and nonofiltration membranes. J. Membr. Sci. 1993, 83:81-150.
9. Freeman B.D., Pinnau I. Gas and liquid separations using membranes: an overview. ACS Symp. Ser. 2004, 876:1-23.
10. Vedavyasan C.V. Pretreatment trends-an overview. Desalination 2007, 203:296-299.
11. 2 loading electrocatalytic membrane for oily wastewater treatment. Environ. Sci. Technol. 2012, 46:6815-6821.
12. Hilal N., Ogunbiyi O.O., Miles N.J., Nigmatullin R. Methods employed for control of fouling in MF and UF membranes: a comprehensive review. Sep. Sci. Technol. 2005, 1957:1957-2005.
13. Maguire-Boyle S.J., Barron A.R. A new functionalization strategy for oil-water separation membranes. Science 2011, 382:107-115.
14. 3/PES membrane for wastewater filtration. J. Membr. Sci. 2009, 341:67-75.
15. Chen W., Peng J., Su Y., Zheng L., Wang L. Separation of oil-water mixture using Pluronic F127 modified polyethersulfon ultrafiltration membranes. Science 2009, 66:591-597.
16. Li H.J., Cao Y.M., Qin J.J., Jie X.M., Wang T.H., Liu J.H., Yuan Q. Development and characterization of anti-fouling cellulose hollow fiber UF membranes for oil-water separation. J. Membr. Sci. 2006, 279:328-335.
17. Singh A.K., Prakash S., Kulshrestha V., Shahi V.K. ACS Appl. Mater. Interfaces 2012, 4:1683-1692.
18. Milic J.K., Muric A., Petrinic I., Simonic M. Recent developments in membrane treatment of spent cutting-oils: a review. Ind. Eng. Chem. Res. 2013, 52:7603-7616.
19. Faibish R.S., Cohen Y. Fouling and rejection behavior of ceramic and polymer-modified ceramic membranes for ultrafiltration of oil-in-water mixtures and micromixtures. Colloids Surf., A 2001, 191:27-40.
20. McCloskey B.D., Park H.B., Ju H., Rowe B.W., Miller D.J., Freeman B.D. A bioinspired fouling-resistant surface modification for water purification membranes. J. Membr. Sci. 2012, 413-414:82-90.
21. Suk D.E., Matsuura T. Membrane-based hybrid processes: a review. Sep. Sci. Technol. 2006, 41:595-626.
22. Miyano T., Matsuura T., Sourirajan S. Effect of polyvinylpyrrolidone additive on the pore size and the pore size distribution of polyethersulfone (victrex) membranes. Chem. Eng. Commun. 1993, 119:23-39.
23. Saranya R., Arthanareeswaran G., Sakthivelu S., Manohar P. Preparation and performance evaluation of nanokaolinite-2 particle-based polyacrylonitrile mixed-matrix membranes. Ind. Eng. Chem. Res. 2012, 51:4942-4951.
24. Hilal N., Al-Abri M., Al-Hinai H. Characterization and retention of UF membranes using PES, HS and polyelectrolytes. Desalination 2007, 206:568-578.
25. Marchese J., Ponce M., Ochoa N.A., Prádanos P., Palacio L., Hernández A. Fouling behaviour of polyethersulfone UF membranes made with different PVP. J. Membr. Sci. 2003, 211:13-24.
26. Kesting R.E. Synthetic Polymeric Membranes 1985, Wiley and Sons Publication, New York. 2nd ed.
27. Jung A., Yoon J.K., Kim B., Rhee H. Effect of molecular weight of polymeric additives on formation, permeation properties and hypochlorite treatment of asymmetric polyacrylonitrile membranes. J. Membr. Sci. 2004, 243:45-57.
28. Chuang W.Y., Young T.H., Chiu W.Y., Lin C.Y. The effect of polymeric additives on the structure and permeability of poly(vinyl alcohol) asymmetric membranes. Polymer 2002, 41:5633-5641.
29. Idris A., Yet L.K. The effect of different molecular weight PEG additives on cellulose acetate asymmetric dialysis membrane performance. J. Membr. Sci. 2006, 280:920-927.
30. Wienk I.M., Boom R.M., Beerlage M.A.M., Bulte A.M.W., Smolders C.A., Strathman H. Recent advances in the formation of phase inversion membranes from amorphous or semi crystalline polymers. J. Membr. Sci. 1993, 113:361-371.
31. Zheng Q.Z., Wang P., Yang Y.N., Cui D.J. The relationship between porosity and kinetics parameter of membrane formation in PSF ultrafiltration membrane. J. Membr. Sci. 2006, 286:7-11.
32. Han M.J., Nam S.T. Thermodynamic and rheological variation in polysulfone solution by PVP and its effect in the preparation of phase inversion membrane. J. Membr. Sci. 2002, 202:55-61.
33. Sadeghi I., Aroujalian A., Raisi A., Dabir B., Fathizadeh M. Surface modification of polyethersulfone ultrafiltration membranes by corona air plasma for separation of oil-water mixtures. J. Membr. Sci. 2013, 430:24-36.
34. Sadeghi I., Aroujalian A., Raisi A., Dabir B., Fathizadeh M. Surface modification of Polyethersulfone ultrafiltration membranes by corona air plasma for separation of oil/water emulsions. J. Membr. Sci. 2013, 430:24-36.
35. Interpretation of Infrared Spectra. A Practical Approach. John Coates in Encyclopedia of Analytical Chemistry 2000, 10815-10837. John Wiley & Sons Ltd, Chichester. R.A. Meyers (Ed.).
36. Arthanareeswaran G., Mohan D., Raajenthiren M. Preparation, characterization and performance studies of ultrafiltration membranes with polymeric additive. J. Membr. Sci. 2010, 350:130-138.
37. Jaya N., Arthanareeswaran G., Mohan D., Raajenthiren M., Thanikaivelan P. Studies on permeation, rejection, and transport of aqueous poly(ethylene glycol) solutions using ultrafiltration membranes. Sep. Sci. Technol. 2007, 42:963-978.
38. Lee S., Aurelle Y., Roques H. Concentration polarization, membrane fouling and cleaning in ultrafiltration of soluble oil. J. Membr. Sci. 1984, 19:23-38.
39. Mueller J., Cen Y., Davis R.H. Crossflow microfiltration of oily water. J. Membr. Sci. 1997, 129:221-235.
40. Arnot T., Field R., Koltuniewicz A. Cross-flow and dead-end microfiltration of oily-water emulsions: part II. Mechanisms and modelling of flux decline. J. Membr. Sci. 2000, 169:1-15.
41. Hilal N., Busca G., Hankins N., Mohammad A.W. The use of ultrafiltration and nanofiltration membranes in the treatment of metalworking fluids. Desalination 2004, 167:227-238.
42. Lobo A., Cambiella A., Benito J.M., Pazos C., Coca J. Ultrafiltration of oil-in-water mixtures with ceramic membranes: influence of pH and crossflow velocity. J. Membr. Sci. 2006, 278:328-334.
43. Dresselhuis D.M., Van Aken G.A., De Hoog E.H.A., Stuart M.A.C. Direct observation of adhesion and spreading of mixture droplets at solid surfaces. Soft Matter 2008, 4:1079-1085.
44. Nabi N., Aimar P., Meireles M. Ultrafiltration of an olive oil mixture stabilized by an anionic surfactant. J. Membr. Sci. 2000, 166:177-188.
45. Banerjee, Pangule R.C., Kane R.S. Antifouling coatings: recent developments in the design of surfaces that prevent fouling by proteins, bacteria, and marine organisms. Adv. Mater. 2011, 23:690-718.