Synthesis and characterisation of poly (lactic acid)/halloysite bionanocomposite films

Journal of Composite Materials

Volumn 48, Issue 30, 2014, Pages 3705-3717

  De Silva, R T ^a   Pasbakhsh, Pooria ^a   Goh, K L ^b   Chai, S P ^a   Chen, J ^b  

^a MONASH UNIVERSITY MALAYSIA   (Malaysia)

^b NEWCASTLE UNIVERSITY   (United Kingdom)

Author keywords

chemical interaction; Halloysite nanotubes; mechanical properties; poly (lactic acid) bionanocomposite films; thermal stability

Indexed keywords

CHEMICAL STABILITY; CONTACT ANGLE; HYDROGEN BONDS; KAOLINITE; LACTIC ACID; MECHANICAL PROPERTIES; NANOTUBES; TENSILE STRENGTH; TENSILE TESTING; THERMODYNAMIC STABILITY;

BIONANOCOMPOSITE FILMS; CHEMICAL INTERACTIONS; HALLOYSITE NANOTUBE (HNTS); HALLOYSITE NANOTUBES; INTERFACIAL INTERACTION; PACKAGING APPLICATIONS; SOLUTION-CASTING METHOD; TENSILE ELASTIC MODULUS;

THERMOGRAVIMETRIC ANALYSIS;

EID: 84897972395     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998313513046     Document Type: Article

References (49)

1. Rhim J-W, Hong S-I, Ha C-S. Tensile, water vapor barrier and antimicrobial properties of PLA/nanoclay composite films. LWT - Food Sci Technol. 2009 ; 42: 612-617
2. Fukushima K, Tabuani D, Camino G. Nanocomposites of PLA and PCL based on montmorillonite and sepiolite. Mater Sci Eng C. 2009 ; 29: 1433-1441
3. Rhim J-W, Mohanty AK, Singh SP, et al. Effect of the processing methods on the performance of polylactide films: Thermocompression versus solvent casting. J Appl Polym Sci. 2006 ; 101: 3736-3742
4. Petersson L, Oksman K. Biopolymer based nanocomposites: Comparing layered silicates and microcrystalline cellulose as nanoreinforcement. Compos Sci Technol. 2006 ; 66: 2187-2196
5. Najafi N, Heuzey MC, Carreau PJ, et al. Control of thermal degradation of polylactide (PLA)-clay nanocomposites using chain extenders. Polym Degrad Stability. 2012 ; 97: 554-565
6. Fukushima K, Abbate C, Tabuani D, et al. Biodegradation of poly(lactic acid) and its nanocomposites. Polym Degrad Stability. 2009 ; 94: 1646-1655
7. Papageorgiou GZ, Achilias DS, Nanaki S, et al. PLA nanocomposites: Effect of filler type on non-isothermal crystallization. Thermochimica Acta. 2010 ; 511: 129-139
8. Murariu M, Da Silva Ferreira A, Pluta M, et al. Polylactide (PLA)-CaSO4 composites toughened with low molecular weight and polymeric ester-like plasticizers and related performances. Eur Polym J. 2008 ; 44: 3842-3852
9. Yokohara T, Yamaguchi M. Structure and properties for biomass-based polyester blends of PLA and PBS. Eur Polym J. 2008 ; 44: 677-685
10. Madhavan Nampoothiri K, Nair NR, John RP. An overview of the recent developments in polylactide (PLA) research. Biores Technol. 2010 ; 101: 8493-8501
11. Sébastien F, Stéphane G, Copinet A, et al. Novel biodegradable films made from chitosan and poly(lactic acid) with antifungal properties against mycotoxinogen strains. Carbohydrate Polym. 2006 ; 65: 185-193
12. Nugraha E, Suyatma AC, Lan Tighzert, et al. Mechanical and barrier properties of biodegradable films made from chitosan and poly (lactic acid) blends. J Polym Environ. 2004 ; 12: 1-6
13. Auras R, Harte B, Selke S. An overview of polylactides as packaging materials. Macromol Biosci. 2004 ; 4: 835-864
14. Bang G, Kim SW. Biodegradable poly(lactic acid)-based hybrid coating materials for food packaging films with gas barrier properties. J Indus Eng Chem. 2012 ; 18: 1063-1068
15. Bleach NC, Nazhat SN, Tanner KE, et al. Effect of filler content on mechanical and dynamic mechanical properties of particulate biphasic calcium phosphate-polylactide composites. Biomaterials. 2002 ; 23: 1579-1585
16. Rakmae S, Ruksakulpiwat Y, Sutapun W, et al. Physical properties and cytotoxicity of surface-modified bovine bone-based hydroxyapatite/poly(lactic acid) composites. J Compos Mater. 2011 ; 45: 1259-1269
17. Meng QK, Hetzer M, De Kee D. PLA/clay/wood nanocomposites: Nanoclay effects on mechanical and thermal properties. J Compos Mater. 2011 ; 45: 1145-1158
18. Najafi N, Heuzey MC, Carreau PJ. Polylactide (PLA)-clay nanocomposites prepared by melt compounding in the presence of a chain extender. Compos Sci Technol. 2012 ; 72: 608-615
19. Urbanczyk L, Ngoundjo F, Alexandre M, et al. Synthesis of polylactide/clay nanocomposites by in situ intercalative polymerization in supercritical carbon dioxide. Eur Polym J. 2009 ; 45: 643-648
20. Touny AH. Effect of electrospinning parameters on the characterization of PLA/HNT nanocomposite fibers. J Mater Res. 2010 ; 25: 857-863
21. Jeszka JK, Pietrzak L, Pluta M, et al. Dielectric properties of polylactides and their nanocomposites with montmorillonite. J Non-Crystalline Solids. 2010 ; 356: 818-821
22. Averett RD, Realff ML, Jacob K, et al. The mechanical behavior of poly(lactic acid) unreinforced and nanocomposite films subjected to monotonic and fatigue loading conditions. J Compos Mater. 2011 ; 45: 2717-2726
23. Pandey JK, Kim CS, Chu WS, et al. Preparation and structural evaluation of nano reinforced composites from cellulose whiskers of grass and biodegradable polymer matrix. J Compos Mater. 2012 ; 46: 653-663
24. Pasbakhsh P, Ismail H, Fauzi MNA, et al. EPDM/modified halloysite nanocomposites. Appl Clay Sci. 2010 ; 48: 405-413
25. Pasbakhsh P, Churchman GJ, Keeling JL. Characterisation of properties of various halloysites relevant to their use as nanotubes and microfibre fillers. Appl Clay Sci. 2012 ; 74: 47-57
26. Du M, Guo B, Jia D. Newly emerging applications of halloysite nanotubes: A review. Polym Int. 2010 ; 59: 574-582
27. De Silva RT, Pasbakhsh P, Goh KL, et al. Physico-chemical characterisation of chitosan/halloysite composite membranes. Polymer Test. 2013 ; 32: 265-271
28. Rooj S, Das A, Thakur V, et al. Preparation and properties of natural nanocomposites based on natural rubber and naturally occurring halloysite nanotubes. Mater Des. 2010 ; 31: 2151-2156
29. Chang J-H, An YU, Sur GS. Poly(lactic acid) nanocomposites with various organoclays. I. Thermomechanical properties, morphology, and gas permeability. J Polym Sci Part B: Polym Phys. 2003 ; 41: 94-103
30. Liu M, Zhang Y, Zhou C. Nanocomposites of halloysite and polylactide. Appl Clay Sci. 2013 ; 75-76: 52-59
31. Wu W, Cao X, Zhang Y, et al. Polylactide/halloysite nanotube nanocomposites: Thermal, mechanical properties, and foam processing. J Appl Polym Sci. 2013 ; 130: 443-452
32. Prashantha K, Lecouvet B, Sclavons M, et al. Poly(lactic acid)/halloysite nanotubes nanocomposites: Structure, thermal, and mechanical properties as a function of halloysite treatment. J Appl Polym Sci. 2013 ; 128: 1895-1903
33. Murariu M, Dechief A-L, Paint Y, et al. Polylactide (PLA)-halloysite nanocomposites: production, morphology and key-properties. J Polym Environ. 2012 ; 20: 932-943
34. Matusik J, Stodolak E, Bahranowski K. Synthesis of polylactide/clay composites using structurally different kaolinites and kaolinite nanotubes. Appl Clay Sci. 2011 ; 51: 102-109
35. Huda MS, Drzal LT, Mohanty AK, et al. Effect of fiber surface-treatments on the properties of laminated biocomposites from poly(lactic acid) (PLA) and kenaf fibers. Compos Sci Technol. 2008 ; 68: 424-432
36. Paul M-A, Alexandre M, Degée P, et al. New nanocomposite materials based on plasticized poly(l-lactide) and organo-modified montmorillonites: Thermal and morphological study. Polymer. 2003 ; 44: 443-450
37. Ray SS, Yamada K, Okamoto M, et al. Control of biodegradability of polylactide via nanocomposite technology. Macromol Mater Eng. 2003 ; 288: 203-208
38. Oliver WC, Pharr GM. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 1992 ; 7: 1564-1583
39. Liu M, Jia Z, Liu F, et al. Tailoring the wettability of polypropylene surfaces with halloysite nanotubes. J Colloid Interface Sci. 2010 ; 350: 186-193
40. Voon H, Bhat R, Easa A, et al. Effect of addition of halloysite nanoclay and SiO2 nanoparticles on barrier and mechanical properties of bovine gelatin films. Food Bioprocess Technol. 2012 ; 5: 1766-1774
41. Chen J, Bull SJ, Roy S, et al. Nanoindentation and nanowear study of Sn and Ni-Sn coatings. Tribol Int. 2009 ; 42: 779-791
42. Chen J, Birch MA, Bull SJ. Nanomechanical characterization of tissue engineered bone grown on titanium alloy in vitro. J Mater Sci: Mater Med. 2010 ; 21: 277-282
43. Briscoe BJ, Sebastian KS. The Elastoplastic Response of poly(methyl methacrylate) to indentation. Proc Royal Soc London Series A: Math Phys Eng Sci. 1996 ; 452: 439-457
44. Tranchida D, Piccarolo S, Loos J, et al. Mechanical characterization of polymers on a nanometer scale through nanoindentation: A study on pile-up and viscoelasticity. Macromolecules. 2007 ; 40: 1259-1267
45. Yuan P, Southon PD, Liu Z, et al. Functionalization of halloysite clay nanotubes by grafting with aminopropyltriethoxysilane. J Phys Chem C. 2008 ; 112: 15742-15751
46. Ruyin Wang SW, Yong Zhang. Morphology, rheological behavior, and thermal stability of PLA/PBSA/POSS composites. J Appl Sci. 2009 ; 113: 3095-3102
47. Zhou S, Zheng X, Yu X, et al. Hydrogen bonding interaction of Poly(D,L-Lactide)/hydroxyapatite anocomposites. Chem Mater. 2007 ; 19: 247-253
48. Haque P, Parsons AJ, Barker IA, et al. Interfacial properties of phosphate glass fibres/PLA composites: Effect of the end functionalities of oligomeric PLA coupling agents. Compos Sci Technol. 2010 ; 70: 1854-1860
49. Ozkoc G, Kemaloglu S, Quaedflieg M. Production of poly(lactic acid)/organoclay nanocomposite scaffolds by microcompounding and polymer/particle leaching. Polym Compos. 2010 ; 31: 674-683