A comparative morphological study of primary and aged particles emitted from a biodiesel (B20) vis-à-vis diesel fuelled CRDI engine

Aerosol and Air Quality Research

Volumn 14, Issue 3, 2014, Pages 934-942

  Shukla, Pravesh Chandra ^a   Gupta, Tarun ^a   Agarwal, Avinash Kumar ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY KANPUR   (India)

Author keywords

Biodiesel; Elemental and organic carbon (EC OC); Particle morphology; Scanning electron microscopy (SEM); Sulphate

Indexed keywords

BIODIESEL; DAYLIGHT SIMULATION; MINERALS; MORPHOLOGY; PHOTOCHEMICAL REACTIONS; QUARTZ; SCANNING ELECTRON MICROSCOPY;

ELEMENTAL AND ORGANIC CARBONS; EXHAUST PARTICLES; MORPHOLOGICAL ANALYSIS; MORPHOLOGICAL STUDY; PARTICLE MORPHOLOGIES; SPORTS UTILITY VEHICLES; SULPHATES; ULTRA-VIOLET LIGHT;

ENGINES;

AIR SAMPLING; ATMOSPHERIC POLLUTION; COMPARATIVE STUDY; DIESEL ENGINE; EXHAUST EMISSION; MORPHOLOGY; PARTICULATE MATTER; SCANNING ELECTRON MICROSCOPY; SULFATE;

EID: 84897848290     PISSN: 16808584     EISSN: 20711409     Source Type: Journal    
DOI: 10.4209/aaqr.2013.05.0162     Document Type: Article

References (37)

1. Abdul-Khalek, I., Kittelson, D.B. and Brear, F. (1998). Diesel Trap Performance: Particle Size Measurements and Trends.SAE 982599.
2. Abdul-Khalek, I., Kittelson, D.B. and Brear, F. (1999). The Influence of Dilution Conditions on Diesel Exhaust Particle Size Distribution Measurements. SAE 1999-01-1142.
3. Agarwal A.K. and Rajamanoharan, K. (2009). Experimental Investigations of Performance and Emissions of Karanja Oil and Its Blends in a Single Cylinder Agricultural Diesel Engine. Appl. Energy 86: 106-112.
4. Agarwal, A.K., Gupta, T., Dixit, N. and Shukla, P.C. (2013). Toxic Potential of Primary and Secondary Aerosols from Biodiesel. Inhalation Toxicol. 25: 325-332.
5. Agarwal, A.K., Gupta, T. and Kothari, A. (2011). Particulate Emissions from Biodiesel vs diesel Fuelled Compression Ignition Engine. Renewable Sustainable Energy Rev. 15: 3278-3300.
6. Baumgard, K. and Kittelson, D.B. (1985). The Influence of a Ceramic Particle Trap on the Size Distribution of Diesel Particles. SAE 850009.
7. Bharat Petroleum Corporation Limited. Fuel Specification, High Speed Diesel Oil, Bharat Stage IV, Bharat Petroleum.http://www.bharatpetroleum.in/pdf/MR_High_Speed_Diesel_Oil_Bharat_StageIV.pdf.
8. Chakraborty, A. and Gupta, T. (2010). Chemical Characterization and Source Apportionment of Submicron (PM1) Aerosol in Kanpur Region, India. Aerosol Air Qual. Res. 10: 433-445.
9. Dhar, A. (2013). Combustion, Performance, Emissions, Durability and Lubricating Oil Tribology Investigations of Biodiesel (Karanja) Fuelled Compression Ignition Engine, Doctoral Thesis, Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur India.
10. Dowling, M. (1992). The Impact of Oil Formulation on Emissions from Diesel Engines. SAE 922198.
11. Dwivedi, D., Agarwal, A.K. and Sharma, M. (2006). Particulate Emission Characterization of a Biodiesel vs. Diesel-Fuelled Compression Ignition Transport Engine: A Comparative Study. Atmos. Environ. 40: 5586-5595.
12. Gangwar, J.N., Gupta, T. and Agarwal, A.K. (2012). Composition and Comparative Toxicity of Particulate Matter Emitted from a Diesel and Biodiesel Fuelled CRDI Engine. Atmos. Environ. 46: 472-481.
13. Gupta, T., Dixit, N., Agarwal, A.K. and Gupta, S. (2011). The Secondary Organic Carbon (SOC) Formation from a CRDI Automotive Diesel Engine Exhaust. SAE 2011-01-0642.
14. Gupta, T. and Shefali Dubey, J. (2011). Field Performance Evaluation of a Newly Developed PM2.5Sampler at IIT Kanpur. Sci. Total Environ. 409: 3500-3507.
15. Heintzenberg, J. (1989). Fine Particles in the Global Troposphere: A Review. Tellus Ser. B 41: 149-160.
16. Henk, M.G., Williamson, W.B. and Silver, R.G. (1992). Diesel Catalyst for Low Sulfate Emission. SAE 920368.
17. Heywood, J.B. (1988). Internal Combustion-Engine Fundamentals, McGrawHill, New York.
18. Hoekman, S.K., Broch, A., Robbins, C., Ceniceros, E. and Natarajan, M. (2012). Review of Biodiesel Composition, Properties, and Specifications. Renewable Sustainable Energy Rev. 16: 143-169.
19. Ishiguro, T., Takatori, Y. and Akihama, K. (1997). Microstructure of Diesel Soot Particles Probed by Electron Microscopy: First Observation of Inner Core and Outer Shell. Combust. Flame 108: 231-234.
20. Jung, H., Kittelson, D.B. and Zachariah, M.R. (2006). Characteristics of SME Biodiesel-Fueled Diesel Particle Emissions and the Kinetics of Oxidation. Environ. Sci. Technol. 40: 4949-4955.
21. Kittelson, D.B. (1998). Particles and Nanoparticles: A Review. J. Aerosol Sci. 29: 575-588.
22. Lapuerta, M., Armas, O. and Rodríguez-Fernández, J. (2008). Effect of Biodiesel Fuels on Diesel Engine Emissions. Prog. Energy Combust. Sci. 34: 198-223.
23. Lapuerta, M., Martos, F.J. and Herreros, J.M. (2007).Effect of Engine Operating Conditions on the Size of Primary Particles Composing Diesel Soot Agglomerates. J. Aerosol Sci. 38: 455-466.
24. Lee, K.O., Cole, R., Sekar, R., Choi, M.Y., Kang, J.S., Bae, C.S. and Shin, H.D. (2002). Morphological Investigation of the Microstructure, Dimensions, and Fractal Geometry of Diesel Particulates. Proc. Combust. Inst. 29: 647-653.
25. Lee, K.O., Cole, R., Sekar, R., Choi, M.Y., Zhu, J., Kang, J. and Bae, C. (2011). Detailed Characterization of Morphology and Dimensions of Diesel Particulates Via Thermophoretic Sampling. SAE 2001-01-3572.
26. Lu, T., Cheung, C.S. and Huang, Z. (2012). Effects of Engine Operating Conditions on the Size and Nanostructureof Diesel Particles. J. Aerosol Sci. 47: 27-38.
27. Majewski, W.A. and Khair, M.K. (2006). Diesel Emissions and Their Control, SAE Int. Warrendale, PA.
28. Mansfield, T., Hamilton, R.S., Ellis, B. and Newhy, P. (1991). Diesel Particulate Emissions and the Implications for the Soiling of Buildings. Environmentalist 11: 243-254.
29. Nabi, M.N., Hoque, S.M.N. and Akhter, M.S. (2009). Karanja (Pongamia Pinnata) Biodiesel Production in Bangladesh, Characterization of Karanja Biodiesel and Its Effect on Diesel Emissions. Fuel Process. Technol. 90: 1080-1086.
30. Park, K., Kittelson, D.B. and McMurry, P.H. (2004). Structural Properties of diesel Exhaust Particles Measured by Transmission Electron Microscopy (TEM): Relationships to Particle Mass and Mobility. Aerosol Sci. Technol. 38: 881-889.
31. Ravindra, K., Sokhi, R. and Van Grieken, R. (2008). Atmospheric Polycyclic Aromatic Hydrocarbons: Source Attribution, Emission Factors and Regulation. Atmos. Environ. 42: 2895-2921.
32. Ruiz, P.A., Lawrence, J.E., Wolfson, J.M., Ferguson, S.T., Gupta, T., Kang, C.M. and Koutrakis, P. (2007). Development and Evaluation of a Photochemical Chamber to Examine the Toxicity of Coal-Fired Power Plant Emissions. Inhalation Toxicol. 19: 1-10.
33. Singh, V.P., Gupta, T., Tripathi, S.N., Jariwala, C. and Das, U. (2011). Experimental Study of the Effects of Environmental and fog Condensation Nuclei Parameters on Rate of Fog Formation and Dissipation Using a New Laboratory Scale Fog Generation Facility. Aerosol Air Qual. Res. 11: 140-154.
34. Stevenson, R. (1982). The Morphology and Crystallography of Diesel Particulate Emissions. Carbon 20: 359-365.
35. Zhang, R., Khalizov, A.F., Pagels, J., Zhang, D., Xue, H. and McMurry, P.H. (2008). Variability in Morphology, Hygroscopicity, and Optical Properties of Soot Aerosols during Atmospheric Processing. PNAS 105: 10291-10296.
36. Zhu, J., Lee, K.O., Yozgatligil, A. and Choi, M.Y. (2005). Effects of Engine Operating Conditions on Morphology, Microstructure and Fractal Geometry of Light-Duty Diesel Engine Particulates. Proc. Combust. Inst. 30: 2781-2789.
37. Zielinska, B., Goliff, W., McDaniel, M., Cahill, T., Davis, Kittelson, D. and Watts W. (2003). Chemical Analysis Ofcollected Diesel Particulate Matter Samples in the E- 43 Project. Final Report, National Renewable Energy Laboratory, Subcontract No. ACI-9-29099-01:2003.