Speed control of five-phase induction motors with integrated open-phase fault operation using model-based predictive current control techniques

IEEE Transactions on Industrial Electronics

Volumn 61, Issue 9, 2014, Pages 4474-4484

  Guzman, Hugo ^a   Duran, Mario J ^a   Barrero, Federico ^b   Bogado, Blas ^b   Toral, Sergio ^b  

^a UNIVERSITY OF MÁLAGA   (Spain)

^b UNIVERSITY OF SEVILLE   (Spain)

Author keywords

Fault tolerance; multiphase drives; predictive control techniques

Indexed keywords

DRIVES; ELECTRIC DRIVES; FAULT TOLERANCE; INDUCTION MOTORS; MODEL PREDICTIVE CONTROL; PHASE COMPARATORS; SPEED CONTROL;

CONVENTIONAL CONTROLLERS; ELECTRIC PROPULSION SYSTEMS; FIVE-PHASE INDUCTION MOTORS; MODEL BASED PREDICTIVE CONTROL; MULTI-PHASE DRIVES; MULTI-PHASE INDUCTION MOTORS; PREDICTIVE CONTROL; PREDICTIVE CURRENT CONTROL;

PREDICTIVE CONTROL SYSTEMS;

EID: 84897432357     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2013.2289882     Document Type: Article

References (39)

1. E. Levi, "Multiphase electric machines for variable-speed applications," IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 1893-1909, May 2008. (Pubitemid 351751817)
2. E. Levi, R. Bojoi, F. Profumo, H. Toliyat, and S. Williamson, "Multiphase induction motor drives-A technology status review," IET Elect. Power Appl., vol. 1, no. 4, pp. 489-516, Jul. 2007. (Pubitemid 47545857)
3. T. Raminosoa, C. Gerada, N. Othman, and L. D. Lillo, "Rotor losses in fault-tolerant permanent magnet synchronous machines," IET Elect. Power Appl., vol. 5, no. 1, pp. 75-85, Jan. 2011.
4. O. Jasim, M. Sumner, C. Gerada, and J. Arellano-Padilla, "Development of a new fault-tolerant induction motor control strategy using an enhanced equivalent circuit model," IET Elect. Power Appl., vol. 5, no. 8, pp. 618-627, Sep. 2011.
5. H. Berriri, W. Naouar, I. Bahri, I. Slama-Belkhodja, and E. Monmasson, "Field programmable gate array-based fault-tolerant hysteresis current control for ac machine drives," IET Elect. Power Appl., vol. 6, no. 3, pp. 181-189, Mar. 2012.
6. F. Aghili, "Fault-tolerant torque control of BLDC motors," IEEE Trans. Power Electron., vol. 26, no. 2, pp. 355-363, Feb. 2011.
7. B. A. Welchko, T. A. Lipo, T. M. Jahns, and S. E. Schulz, "Fault tolerant three-phase ac motor drive topologies: A comparison of features, cost, and limitations," IEEE Trans. Power Electron., vol. 19, no. 4, pp. 1108-1116, Jul. 2004.
8. L. Lillo, L. Empringham, P. W. Wheeler, S. Khwan-On, C. Gerada, M. N. Othman, and X. Huang, "Multiphase power converter drive for fault-tolerant machine development in aerospace applications," IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 575-583, Feb. 2010.
9. L. Alberti and N. Bianchi, "Experimental tests of dual three-phase induction motor under faulty operating condition," IEEE Trans. Ind. Electron., vol. 59, no. 5, pp. 2041-2048, May 2012.
10. X. Huang, A. Goodman, C. Gerada, Y. Fang, and Q. Lu, "Design of a five-phase brushless dc motor for a safety critical aerospace application," IEEE Trans. Ind. Electron., vol. 59, no. 9, pp. 3532-3541, Sep. 2012.
11. A. Mohammadpour and L. Parsa, "A unified fault-tolerant current control approach for five-phase PM motors with trapezoidal back EMF under different stator winding connections," IEEE Trans. Power Electron., vol. 28, no. 7, pp. 3517-3527, Jul. 2013.
12. Y. Zhao and T. A. Lipo, "Modeling and control of a multi-phase induction machine with structural unbalance Part I. Machine modeling and multidimensional current regulation," IEEE Trans. Energy Convers., vol. 11, no. 3, pp. 570-577, Sep. 1996. (Pubitemid 126776247)
13. Y. Zhao and T. A. Lipo, "Modeling and control of a multi-phase induction machine with structural unbalance Part II. Field-oriented control and experimental verification," IEEE Trans. Energy Convers., vol. 11, no. 3, pp. 578-584, Sep. 1996. (Pubitemid 126776248)
14. J.-P. Martin, F. Meibody-Tabar, and B. Davat, "Multiple-phase permanent magnet synchronous machine supplied by VSIs, working under fault conditions," in Proc. IEEE Ind. Appl. Conf., 2000, vol. 3, pp. 1710-1717. (Pubitemid 32032060)
15. R. Kianinezhad, B. Nahid-Mobarakeh, L. Baghli, F. Betin, and G. A. Capolino, "Modeling and control of six-phase symmetrical induction machine under fault condition due to open phase," IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 1966-1977, May 2008. (Pubitemid 351728751)
16. J. R. Fu and T. A. Lipo, "Disturbance free operation of a multiphase current regulated motor drive with an opened phase," IEEE Trans. Ind. Appl., vol. 30, no. 5, pp. 1267-1274, Sep. /Oct. 1994.
17. H. M. Ryu, J. W. Kim, and S. K. Sul, "Synchronous-frame current control of multiphase synchronous motor under asymmetric fault condition due to open phases," IEEE Trans. Ind. Appl., vol. 42, no. 4, pp. 1062-1070, Jul. /Aug. 2006.
18. A. Tani, M. Mengoni, L. Zarri, G. Serra, and D. Casadei, "Control of multi-phase induction motors with an odd number of phases under opencircuit phase faults," IEEE Trans. Power Electron., vol. 27, no. 2, pp. 565-577, Feb. 2012.
19. S. Dwari and L. Parsa, "Fault-tolerant control of five-phase permanentmagnet motors with trapezoidal back EMF," IEEE Trans. Ind. Electron., vol. 58, no. 2, pp. 476-485, Feb. 2011.
20. F. Locment, E. Semail, and X. Kestelyn, "Vectorial approach-based control of a seven-phase axial flux machine designed for fault operation," IEEE Trans. Ind. Electron., vol. 55, no. 10, pp. 3682-3691, Oct. 2008.
21. L. Parsa and H. A. Toliyat, "Fault-tolerant interior-permanent- magnet machines for hybrid electric vehicle applications," IEEE Trans. Veh. Technol., vol. 56, no. 4, pp. 1546-1552, Jul. 2007. (Pubitemid 47193910)
22. J. Rodriguez, M. P. Kazmierkowski, J. R. Espinoza, P. Zanchetta, H. Abu-Rub, H. A. Young, and C. A. Rojas, "State of the art of finite control set model predictive control in power electronics," IEEE Trans. Ind. Informat., vol. 9, no. 2, pp. 1003-1016, May 2013.
23. J. Rodriguez, R. M. Kennel, J. R. Espinoza, M. Trincado, C. A. Silva, and C. A. Rojas, "High-performance control strategies for electrical drives: An experimental assessment," IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 812-820, Feb. 2012.
24. C. Lim, E. Levi,M. Jones, N. Abd Rahim, andW. Hew, "FCS-MPC based current control of a five-phase induction motor and its comparison with PI-PWM control," IEEE Trans. Ind. Electron., vol. 61, no. 1, pp. 149-163, Jan. 2014.
25. M. R. Arahal, F. Barrero, S. Toral, M. J. Durán, and R. Gregor, "Multiphase current control using finite-state model-predictive control," Control Eng. Practice, vol. 17, no. 5, pp. 579-587, May 2009.
26. F. Barrero, M. R. Arahal, R. Gregor, S. Toral, and M. J. Duran, "A proof of concept study of predictive current control for VSI driven asymmetrical dual three-phase ac machines," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1937-1954, Jun. 2009.
27. F. Barrero, M. R. Arahal, R. Gregor, S. Toral, and M. J. Durán, "Onestep modulation predictive current control method for the asymmetrical dual three-phase induction machine," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1974-1983, Jun. 2009.
28. R. Gregor, F. Barrero, S. Toral, M. J. Duran, M. R. Arahal, J. Prieto, and J. L. Mora, "Predictive-SVPWM current control method for asymmetrical dual three-phase induction motor drives," IET Elect. Power Appl., vol. 4, no. 1, pp. 26-34, Jan. 2010.
29. F. Barrero, J. Prieto, E. Levi, R. Gregor, S. Toral, M. Duran, andM. Jones, "An enhanced predictive current control method for asymmetrical sixphase motor drives," IEEE Trans. Ind. Electron., vol. 58, no. 8, pp. 3242-3252, Aug. 2011.
30. M. J. Duran, J. Prieto, F. Barrero, and S. Toral, "Predictive current control of dual three-phase drives using restrained search techniques," IEEE Trans. Ind. Electron., vol. 58, no. 8, pp. 3253-3263, Aug. 2011.
31. J. Riveros, F. Barrero, E. Levi, M. J. Durán, M. Jones, and S. Toral, "Variable-speed five-phase induction motor drive based on predictive torque control," IEEE Trans. Ind. Electron., vol. 60, no. 8, pp. 2957-2968, Aug. 2013.
32. H. Guzman, M. J. Duran, and F. Barrero, "Speed control of five-phase induction motor drives with an open phase fault condition and predictive current control methods," in Proc. 38th Annu. IEEE IECON, Melbourne, VIC, Australia, 2012, pp. 3647-3652.
33. H. Guzman, M. J. Duran, and F. Barrero, "A comprehensive fault analysis of a five-phase induction motor drive with an open phase," in Proc. 15th Int. EPE-PEMC, Novi Sad, Serbia, 2012, pp. LS5b. 3-1-LS5b. 3-6.
34. H. S. Che, M. J. Duran, E. Levi, M. Jones, W. P. Hew, and N. A. Rahim, "Post-fault operation of an asymmetrical six-phase induction machine with single and two isolated neutral points," in Proc. IEEE ECCE, Denver, CO, USA, 2013, pp. 1131-1138.
35. M. J. Durán, J. Prieto, and F. Barrero, "Space vector PWM with reduced common-mode voltage for five-phase induction motor drives operating in overmodulation zone," IEEE Trans. Power Electron., vol. 28, no. 8, pp. 4030-4040, Aug. 2013.
36. G. Carrasco and C. Silva, "Space vector PWM method for five-phase two-level VSI with minimum harmonic injection in the over modulation region," IEEE Trans. Ind. Electron., vol. 60, no. 5, pp. 2042-2053, May 2013.
37. A. Abdel-Khalik, A. Morsy, S. Ahmed, and A. Massoud, "Effect of stator winding connection on performance of five-phase induction machines," IEEE Trans. Ind. Electron., vol. 61, no. 1, pp. 3-19, Jan. 2014.
38. A. Yepes, J. A. Riveros, J. Doval-Gandoy, F. Barrero, O. Lopez, B. Bogado, M. Jones, and E. Levi, "Parameter identification of multiphase induction machines with distributed windings-Part 1: Sinusoidal excitation methods," IEEE Trans. Energy Convers., vol. 27, no. 4, pp. 1056-1066, Dec. 2012.
39. J. A. Riveros, A. Yepes, F. Barrero, J. Doval-Gandoy, B. Bogado, O. Lopez, M. Jones, and E. Levi, "Parameter identification of multiphase induction machines with distributed windings-Part 2: Time-domain techniques," IEEE Trans. Energy Convers., vol. 27, no. 4, pp. 1067-1077, Dec. 2012.