Model validation and performance analysis of regenerative solid oxide cells for energy storage applications: Reversible operation

International Journal of Hydrogen Energy

Volumn 39, Issue 11, 2014, Pages 5955-5971

  Kazempoor, P ^a   Braun, R J ^a  

^a Department of Geology and Geological Engineering   (United States)

Author keywords

Energy storage; Mathematical modeling; Pressurized operation; Reversible operation; Solid oxide cell; Syngas fuel

Indexed keywords

ENERGY STORAGE; MATHEMATICAL MODELS; RENEWABLE ENERGY RESOURCES; SOLID OXIDE FUEL CELLS (SOFC);

ELECTRICAL ENERGY STORAGES; ENERGY STORAGE APPLICATIONS; OPTIMAL OPERATING CONDITIONS; PERFORMANCE CHARACTERISTICS; PRESSURIZED OPERATION; REVERSIBLE OPERATION; SOLID-OXIDE CELLS; SYN-GAS;

REGENERATIVE FUEL CELLS;

EID: 84897417349     PISSN: 03603199     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijhydene.2014.01.186     Document Type: Conference Paper

References (43)

1. J. Eyer, and G. Corey Energy storage for the electricity grid: benefits and market potential assessment guide 2010 Sandia National Laboratory Albequerque Final SAND2010-0815
2. R.M. Dell, and D.A.J. Rand Energy storage -A key technology for global energy sustainability J Power Sources 100 2001 2 17
3. D.M. Bierschenk, J.R. Wilson, and S.A. Barnett High efficiency electrical energy storage using a methane-oxygen solid oxide cell Energy Environ Sci 4 2011 944 951
4. 2O: the basis for a renewable energy cycle Energy Fuels 23 2009 3089 3096
5. N. Xu, X. Li, X. Zhao, J.B. Goodenoughb, and K. Huang A novel solid oxide redox flow battery for grid energy storage Energy Environ Sci 4 2011 4942 4946
6. C. Wendel, and R.J. Braun Modeling and design of a novel solid oxide flow battery system for grid-energy 10th European SOFC Forum, Lucerne Switzerland 2012 [Chapter 09-Session A11-80-90]
7. J.E. O'Brien, M.G. McKellar, C.M. Stoots, J.S. Herring, and J.L. Hawkes Parametric study of large-scale production of syngas via high-temperature co-electrolysis Int J Hydrogen Energy 34 2009 4216 4226
8. R.J. Kee, H. Zhu, R.J. Braun, and T.L. Vincent Analysis, optimization, and control of solid-oxide fuel cell systems K. Sundmacher, Advances in chemical engineering: fuel cell engineering 41 2012 Elsevier New York 331 381
9. S.A. Hajimolana, M.A. Hussain, W.M.A. Wan Daud, M. Soroush, and A. Shamiri Mathematical modeling of solid oxide fuel cells: a review Renew Sust Energ Re 15 2011 1893 1917
10. J. Laurencin, D. Kane, G. Delette, J. Deseure, and F. Lefebvre-Joud Modelling of solid oxide steam electrolyser: impact of the operating conditions on hydrogen production J Power Sources 196 2011 2080 2093
11. B. Yildiz, J. Smith, and T. Sofu Thermal-fluid and electrochemical modeling and performance study of a planar oxide electrolysis cell: analysis on SOEC resistances, size, and inlet flow conditions 2006 Argonne National Laboratory Argonne, Illinois ANL-06/52
12. C.M. Stoots, J.E. O'Brien, J.S. Herring, and J.J. Hartvigsen Syngas production via high-temperature coelectrolysis of steam and carbon dioxide J Fuel Cell Sci Tech 6 2009 011014.1-011014.12
13. 2 co-electrolysis Int J Hydrogen Energy 37 2012 6389 6399
14. M. Ni, M.K.H. Leung, and D.Y.C. Leung Energy and exergy analysis of hydrogen production by solid oxide steam electrolyzer plant Int J Hydrogen Energy 32 2007 4648 4660
15. W.L. Becker, R.J. Braun, M. Penev, and M. Melaina Design and technoeconomic performance analysis of a 1 MW solid oxide fuel cell polygeneration system for combined production of heat, hydrogen, and power J Power Sources 200 2012 34 44
16. W. Becker, R.J. Braun, M. Penev, and M. Melaina Production of Fischer-Tropsch liquid fuels from high temperature solid oxide co-electrolysis units Energy 47 2012 99 115
17. S.D. Ebbesen, R. Knibbe, and M. Mogensen Co-electrolysis of steam and carbon dioxide in solid oxide cells J Electrochem Soc 159 2012 F482 F489
18. O.A. Marina, L.R. Pederson, M.C. Williams, G.W. Coffey, K.D. Meinhardt, and C.D. Nguyen et al. Electrode performance in reversible solid oxide fuel cells J Electrochem Soc 154 2007 B452 B459
19. J.C. Ruiz-Morales, D. Marrero-Lopez, J. Canales-Vazquezc, and J.T.S. Irvine Symmetric and reversible solid oxide fuel cells RSC Adv 1 2011 1403 1414
20. M. Ni, M.K.H. Leung, and D.Y.C. Leung Theoretical analysis of reversible solid oxide fuel cell based on proton-conducting electrolyte J Power Sources 177 2008 369 375
21. M. Ni, M.K.H. Leung, and D.Y.C. Leung A modeling study on concentration overpotentials of a reversible solid oxide fuel cell J Power Sources 163 2006 460 466
22. 2 J Electrochem Soc 158 2011 B117 B131
23. J. Ren, S.R. Gamble, A.J. Roscoe, J.T.S. Irvine, and G. Burt Modeling a reversible solid oxide fuel cell as a storage device within ac power networks Fuel Cells 12 2012 773 786
24. J.C. Njodzefon, D. Klotz, A. Kromp, A. Weber, and E. Ivers-Tiffée Electrochemical modeling of the current-voltage characteristics of an sofc in fuel cell and electrolyzer operation modes J Electrochem Soc 160 2013 F313 F323
25. X. Jin, and X. Xue Mathematical modeling analysis of regenerative solid oxide fuel cells in switching mode conditions J Power Sources 195 2010 6652 6658
26. P. Kazempoor, and R.J. Braun Model validation and performance analysis of regenerative solid oxide cells for Energy storage: electrolytic operation Int J Hydrogen Energy 39 2014 2669 2684
27. P. Kazempoor, V. Dorer, and F. Ommi Modelling and performance evaluation of solid oxide fuel cell for building integrated co- and polygeneration Fuel Cells 10 2010 1074 1094
28. P. Kazempoor, V. Dorer, and V. Weber Modelling and evaluation of building integrated SOFC systems Int J Hydrogen Energy 36 2011 13241 13249
29. K. Sasaki, and Y. Teraoka Equilibria in fuel cell gases II. The C-H-O ternary diagrams J Electrochem Soc 150 2003 A885 A888
30. M. Ni Modeling and parametric simulations of solid oxide fuel cells with methane carbon dioxide reforming Energy Convers Manage 70 2013 116 129
31. P. Kazempoor, F. Ommi, and V. Dorer Response of a planar solid oxide fuel cell to step load and inlet flow temperature changes J Power Sources 196 2011 8948 8954
32. J.E. O'Brien Thermodynamic considerations for thermal water splitting processes and high temperature electrolysis International Mechanical Engineering Congress and Exposition (IMECE), Boston, Massachusetts, USA 2008
33. S. Koch Contact resistance of ceramic interfaces between materials used for solid oxide fuel cell 2002 Risø National Laboratory Roskilde, Denmark [PhD Thesis Risø-R-1307 (EN)]
34. J.E. O'Brien, C.M. Stoots, and J.S. Herring Hydrogen production performance of a 10-cell planar solid-oxide electrolysis stack J Fuel Cell Sci Tech 3 2006 213 219
35. S. Liu, C. Song, and Z. Lin The effects of the interconnect rib contact resistance on the performance of planar solid oxide fuel cell stack and the rib design optimization J Power Sources 183 2008 214 225
36. R. O'hayre, S.W. Cha, W. Prinz, and F.B. Colella Fuel cell fundamentals 2nd ed. 2009 John Wiley & Sons New York, USA
37. H. Zhu, and R.J. Kee Modeling distributed charge-transfer processes in sofc membrane electrode assemblies J Electrochem Soc 155 2008 B715 B729
38. S.D. Ebbesen, C. Graves, and M. Mogensen Production of synthetic fuels by co-electrolysis of steam and carbon dioxide Int J Green Energy 6 2009 646 660
39. A. Hagen, M. Menon, R. Barfod, P.V. Hendriksen, S. Ramousse, and P.H. Larsen Properties and performance of sofcs produced on a pre-pilot plant scale Fuel Cells 6 2006 146 150
40. 2. J Am Ceram Soc 84 2001 2652 2656
41. S.H. Jensen, X. Sun, S.D. Ebbesen, R. Knibbe, and M. Mogensen Hydrogen and synthetic fuel production using pressurized solid oxide electrolysis cells Int J Hydrogen Energy 35 2010 9544 9549
42. H. Timmermann, W. Sawady, R. Reimert, and E. Ivers-Tiffée Kinetics of (reversible) internal reforming of methane in solid oxide fuel cells under stationary and APU conditions J Power Sources 195 2010 214 222
43. W. Lehnert, J. Meusinger, and F. Thom Modelling of gas transport phenomena in SOFC anodes J Power Sources 87 2000 57 63