Model validation and performance analysis of regenerative solid oxide cells: Electrolytic operation

International Journal of Hydrogen Energy

Volumn 39, Issue 6, 2014, Pages 2669-2684

  Kazempoor, P ^a   Braun, R J ^a  

^a Department of Geology and Geological Engineering   (United States)

Author keywords

Mathematical modeling; Regenerative solid oxide cells; Reversible solid oxide fuel cells; Solid oxide electrolysis; Syngas fuel

Indexed keywords

EID: 84895057202     PISSN: 03603199     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijhydene.2013.12.010     Document Type: Article

References (41)

1. J. Eyer, and G. Corey Energy storage for the electricity grid: benefits and market potential assessment guide 2010 Sandia National Laboratory Albequerque Final SAND2010-0815
2. D.M. Bierschenk, J.R. Wilson, and S.A. Barnett High efficiency electrical energy storage using a methane-oxygen solid oxide cell Energy Environ Sci 4 2011 944 951
3. N. Xu, X. Li, X. Zhao, J.B. Goodenoughb, and K. Huang A novel solid oxide redox flow battery for grid energy storage Energy Environ Sci 4 2011 4942 4946
4. C. Wendel, and R.J. Braun Modeling and design of a novel solid oxide flow battery system for grid-energy storage 10th European SOFC Forum, Lucerne Switzerland, Chapter 09-Session A11-80-90 2012
5. S.A. Hajimolana, M.A. Hussain, W.M.A. Wan Daud, M. Soroush, and A. Shamiri Mathematical modeling of solid oxide fuel cells: a review Renew Sustain Energy Rev 15 2011 1893 1917
6. P. Kazempoor, V. Dorer, and F. Ommi Modelling and performance evaluation of solid oxide fuel cell for building integrated co- and polygeneration Fuel Cells 10 2010 1074 1094
7. K.J. Kattke, and R.J. Braun Characterization of a novel, highly integrated tubular solid oxide fuel cell system using high-fidelity simulation tools J Power Sources 196 2011 6347 6355
8. W.L. Becker, R.J. Braun, M. Penev, and M. Melaina Design and technoeconomic performance analysis of a 1 MW solid oxide fuel cell polygeneration system for combined production of heat, hydrogen, and power J Power Sources 200 2012 34 44
9. M. Ni, M.K.H. Leung, and D.Y.C. Leung Energy and exergy analysis of hydrogen production by solid oxide steam electrolyzer plant Int J Hydrogen Energy 32 2007 4648 4660
10. J. Laurencin, D. Kane, G. Delette, J. Deseure, and F. Lefebvre-Joud Modelling of solid oxide steam electrolyser: impact of the operating conditions on hydrogen production J Power Sources 196 2011 2080 2093
11. J. Nieminen, I. Dincer, and G. Naterer Comparative performance analysis of PEM and solid oxide steam electrolysers Int J Hydrogen Energy 35 2010 10842 10850
12. J.E. O'Brien, M.G. McKellar, C.M. Stoots, J.S. Herring, and J.L. Hawkes Parametric study of large-scale production of syngas via high-temperature co-electrolysis Int J Hydrogen Energy 34 2009 4216 4226
13. 2 co-electrolysis Int J Hydrogen Energy 37 2012 6389 6399
14. S.H. Jensen, X. Sun, S.D. Ebbesen, R. Knibbe, and M. Mogensen Hydrogen and synthetic fuel production using pressurized solid oxide electrolysis cells Int J Hydrogen Energy 35 2010 9544 9549
15. S. Gopalan, G. Ye, and U.B. Pal Regenerative, coal-based solid oxide fuel cell-electrolyzers J Power Sources 162 2006 74 80
16. X. Jin, and X. Xue Mathematical modeling analysis of regenerative solid oxide fuel cells in switching mode conditions J Power Sources 195 2010 6652 6658
17. 2 co-electrolysis ANS embedded topical: international topical meeting on the safety and management, Boston, Massachusetts, USA 2007
18. S.H. Jensen Solid oxide electrolyser cell Roskilde, Denmark, PhD Thesis Risø-PhD-29(EN) 2006
19. J.E. O'Brien Thermodynamic considerations for thermal water splitting processes and high temperature electrolysis 2008 International Mechanical Engineering Congress and Exposition (IMECE) Boston, Massachusetts, USA
20. M. Suzuki, N. Shikazono, K. Fukagata, and N. Kasagi Numerical analysis of coupled transport and reaction phenomena in an anode-supported flat-tube solid oxide fuel cell J Power Sources 180 2008 29 40
21. A.J. Bard, and R.L. Faulkner Electrochemical methods: fundamentals and applications 2nd ed. 2001 Wiley New York
22. B. Yildiz, J. Smith, and T. Sofu Thermal-fluid and electrochemical modeling and performance study of a planar oxide electrolysis cell: analysis on SOEC resistances, size, and inlet flow conditions 2006 Argonne National Laboratory Argonne, Illinois ANL-06/52
23. H. Zhu, and R.J. Kee A general mathematical model for analyzing the performance of fuel-cell membrane-electrode assemblies J Power Sources 117 2003 61 74
24. W. Lehnert, J. Meusinger, and F. Thom Modelling of gas transport phenomena in SOFC anodes J Power Sources 87 2000 57 63
25. Q. Wang, L. Li, and C. Wang Numerical study of thermoelectric characteristics of a planar solid oxide fuel cell with direct internal reforming of methane J Power Sources 186 2009 399 407
26. R.J. Braun Optimal design and operation of solid oxide fuel cell systems for small-scale stationary applications [PhD thesis] 2002 University of Wisconsin-Madison
27. J.E. O'Brien, C.M. Stoots, J.S. Herring, and P.A. Lessing Performance measurements of solid-oxide electrolysis cells for hydrogen production J Fuel Cell Sci Technol 2 2005 156 163
28. C.M. Stoots, J.E. O'Brien, J.S. Herring, and J.J. Hartvigsen Syngas production via high-temperature coelectrolysis of steam and carbon dioxide J Fuel Cell Sci Technol 6 2009 011014.1-12
29. J.S. Herring, J.E. O'Brien, C.M. Stoots, G.L. Hawkes, and J.J. Hartvigsen Progress in high-temperature electrolysis for hydrogen production using planar SOFC technology Int J Hydrogen Energy 32 2007 440 450
30. S.D. Ebbesen, R. Knibbe, and M. Mogensen Co-electrolysis of steam and carbon dioxide in solid oxide cells J Electrochem Soc 159 2012 F482 F489
31. 2O in solid oxide cells: performance and durability Solid State Ionics 192 2011 398 403
32. 2 co-electrolysis in a 10-cell stack 2007 Idaho National Laboratory Idaho Falls, Idaho INL/CON-07-12103
33. S. Koch Contact resistance of ceramic interfaces between materials used for solid oxide fuel cell 2002 Risø National Laboratory Roskilde, Denmark PhD thesis Risø-R-1307(EN)
34. J.E. O'Brien, C.M. Stoots, and J.S. Herring Hydrogen production performance of a 10-cell planar solid-oxide electrolysis stack J Fuel Cell Sci Technol 3 2006 213 219
35. D.H. Jeon, J.H. Nam, and C.J. Kim Microstructural optimization of anode-supported solid oxide fuel cells by a comprehensive microscale model J Electrochem Soc 153 2006 A406 A417
36. S. Liu, C. Song, and Z. Lin The effects of the interconnect rib contact resistance on the performance of planar solid oxide fuel cell stack and the rib design optimization J Power Sources 183 2008 214 225
37. M. Vogler Elementary kinetic modeling applied to solid oxide fuel cell pattern anodes and a direct flame fuel cell system [Ph.D. thesis] 2009 Ruperto-Carola University of Heidelberg Heidelberg, Germany
38. 2 J Electrochem Soc 158 2011 B117 B131
39. W.L. Becker, R.J. Braun, M. Melaina, and M. Penev Production of Fischer-Tropsch liquid fuels from high temperature solid oxide Co-electrolysis units Energy 47 2012 99 115
40. P. Kazempoor, and R.J. Braun Model validation and performance analysis of regenerative solid oxide cells: reversible operation Int J Hydrogen Energy 39 6 2014 2669 2684
41. Y. Mollayi Barzi, M. Ghassemi, and M.H. Hamedi A 2D transient numerical model combining heat/mass transport effects in a tubular solid oxide fuel cell J Power Sources 192 1 1 July 2009 200 207