Investigation on the extensibility of the wood cell-wall composite by an approach based on homogenisation and uncertainty analysis

Composite Structures

Volumn 108, Issue 1, 2014, Pages 212-222

  Saavedra Flores, E I ^a   DiazDelaO, F A ^b   Friswell, M I ^c   Ajaj, R M ^d  

^a UNIVERSIDAD DE SANTIAGO DE CHILE   (Chile)

^b UNIVERSITY OF LIVERPOOL   (United Kingdom)

^c SWANSEA UNIVERSITY   (United Kingdom)

^d UNIVERSITY OF SOUTHAMPTON   (United Kingdom)

Author keywords

Finite elements; Gaussian process; Multi scale analysis; Ultrastructure; Uncertainty analysis; Wood

Indexed keywords

BIOMECHANICS; CELLULOSE; COST BENEFIT ANALYSIS; COSTS; FINITE ELEMENT METHOD; MECHANICAL PROPERTIES; STATISTICS; UNCERTAINTY ANALYSIS;

FINITE-ELEMENT APPROACH; GAUSSIAN PROCESSES; MICROSTRUCTURE AND MECHANICAL PROPERTIES; MULTI SCALE ANALYSIS; PARAMETRIC UNCERTAINTIES; STATISTICAL APPROXIMATION; TENSILE LOADING CONDITION; ULTRASTRUCTURE;

WOOD;

CELLULOSE; COSTS; FINITE ELEMENT ANALYSIS; MECHANICAL PROPERTIES; STATISTICS; WOOD;

EID: 84896928183     PISSN: 02638223     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compstruct.2013.08.034     Document Type: Article

References (73)

1. Adler D.C., Buehler M.J. Mesoscale mechanics of wood cell walls under axial strain. Soft Matter 2013, 9:7138-7144.
2. Altaner C.M., Jarvis M.C. Modelling polymer interactions of the 'molecular velcro' type in wood under mechanical stress. J Theoret Biol 2008, 253(3):434-445.
3. Andersson S. A study of the nanostructure of the cell wall of the tracheids of conifer xylem by X-ray scattering. PhD thesis, University of Helsinki, Finland; 2006.
4. Andersson S., Wikberg H., Pesonen E., Maunu S.L., Serimaa R. Studies of crystallinity of scots pine and Norway spruce cellulose. Trees - Struct Funct 2004, 18(3):346-353.
5. Baley C. Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase. Compos Part A: Appl Sci Manuf 2002, 33(7):939-948.
6. Bergander A., Salmén L. Cell wall properties and their effects on the mechanical properties of fibers. J Mater Sci 2002, 37(1):151-156.
7. Bodig J., Jayne B. Mechanics of wood and wood composites 1982, Von Nostrand Reinhold, New York.
8. s1 cell wall layer of Normay spruce compression wood tracheids. IAWA J 2004, 25(4):415-423.
9. Burgert I. Exploring the micromechanical design of plant cell walls. Am J Botany 2006, 93(10):1391-1401.
10. Burgert I., Eder M., Gierlinger N., Fratzl P. Tensile and compressive stresses in tracheids are induced by swelling based on geometrical constraints of the wood cell. Planta 2007, 226(4):981-987.
11. Burgert I., Keckés J., Frühmann K., Fratzl P., Tschegg S.E. A comparison of two techniques for wood fibre isolation - evaluation by tensile tests on single fibres with different microfibril angle. Plant Biol 2002, 4(1):9-12.
12. Castro-Triguero R, Murugan S, Friswell M, Gallego R. Optimal sensor placement for structures under parametric uncertainty. IMAC XXXI. Garden Grove, California, USA; 2013. p. 215.
13. Chen W., Lickfield G.C., Yang C.Q. Molecular modeling of cellulose in amorphous state. Part I: model building and plastic deformation study. Polymer 2004, 45(3):1063-1071.
14. Chen W., Lickfield G.C., Yang C.Q. Molecular modeling of cellulose in amorphous state. Part II: effects of rigid and flexible crosslinks on cellulose. Polymer 2004, 45(21):7357-7365.
15. Cousin W.J., Armstrong R.W., Robinson W.H. Young's modulus of lignin from a continuous indentation test. J Mater Sci 1975, 10(10):1655-1658.
16. De Magistris F., Salmén L. Mechanical behaviour of wet wood in sequences of compression and combined compression and shear. Nordic Pulp Paper Res J 2006, 21(2):231-236.
17. de Souza Neto E.A., Perić D., Dutko M., Owen D.R.J. Design of simple low order finite elements for large strain analysis of nearly incompressible solids. Int J Solids Struct 1996, 33:3277-3296.
18. DiazDelaO F.A., Adhikari S. Structural dynamic analysis using Gaussian process emulators. Eng Comput 2010, 27(5):580-605.
19. DiazDelaO F.A., Adhikari S. Gaussian process emulators for the stochastic finite element method. Int J Numer Methods Eng 2011, 87(6):521-540.
20. DiazDelaO F.A., Adhikari S. Bayesian assimilation of multi-fidelity finite element models. Comput Struct 2012, 92-93(0):206-215.
21. Dinwoodie J. Timber - its nature and behavior 1981, Von Nostrand Reinhold, New York.
22. Dweib M., Hu B., Shenton H., Wool R. Bio-based composite roof structure: manufacturing and processing issues. Compos Struct 2006, 74(4):379-388.
23. Forrester A.I.J., Sóbester A. Engineering design via Surrogate modeling. A practical guide 2008, John Wiley & Sons, Chichester (UK).
24. Fratzl P., Burgert I., Keckés J. Mechanical model for the deformation of the wood cell wall. Z Metal/Mater Res Adv 2004, 7(95):579-584.
25. Gabr M.H., Elrahman M.A., Okubo K., Fujii T. Effect of microfibrillated cellulose on mechanical properties of plain-woven {CFRP} reinforced epoxy. Compos Struct 2010, 92(9):1999-2006.
26. Gindl W., Gupta H.S., Schoberl T., Lichtenegger H.C., Fratzl P. Mechanical properties of spruce wood cell walls by nanoindentation. Appl Phys 2004, 79A:2069-2073.
27. Haylock R., O'Hagan A. Bayesian statistics 5. On inference for outputs of computationally expensive algorithms with uncertainty on the inputs 1996, Oxford University Press, Oxford (UK).
28. Hofstetter K., Hellmich C., Eberhardsteiner J. Development and experimental validation of a continuum micromechanics model for the elasticity of wood. Eur J Mech A/Solids 2005, 24(6):1030-1053.
29. Holmberg S., Persson K., Petersson H. Nonlinear mechanical behaviour and analysis of wood and fibre materials. Comput Struct 1999, 72(4-5):459-480.
30. Kamiyama T., Suzuki H., Sugiyama J. Studies of the structural change during deformation in cryptomeria japonica by time-resolved synchrotron small-angle X-ray scattering. J Struct Biol 2005, 151(1):1-11.
31. Keane A., Nair P. Computational approaches for aerospace design 2005, John Wiley & Sons, Chichester (UK).
32. Keckés J., Burgert I., Frühmann K., Müller M., Kölln K., Hamilton M., et al. Cell-wall recovery after irreversible deformation of wood. Nat Mater 2003, 2:811-814.
33. Kleijnen J.P.C. Kriging metamodeling in simulation: a review. Eur J Oper Res 2009, 192(3):707-716.
34. Lichtenegger H., Reiterer A., Stanzl-Tschegg S., Fratzl P. Variation of cellulose microfibril angles in softwoods and hardwoods - a possible strategy of mechanical optimization. J Struct Biol 1999, 128:257-269.
35. Marklund E., Varna J. Modeling the effect of helical fiber structure on wood fiber composite elastic properties. Appl Compos Mater 2009, 16(4):245-262.
36. McFarland J., Mahadevan S. Multivariate significance testing and model calibration under uncertainty. Comput Methods Appl Mech Eng 2008, 197(29-32):2467-2479.
37. Navi P. Micromechanics of wood subjected to axial tension. Wood Sci Technol 1995, 29(6):411-429.
38. Newman R.H. Homogeneity in cellulose crystallinity between samples of Pinus radiata wood. Holzforschung - Int J Biol Chem Phys Technol Wood 2004, 58(1):91-96.
39. Nilsson T., Gustafsson P.J. Influence of dislocations and plasticity on the tensile behaviour of flax and hemp fibres. Compos Part A: Appl Sci Manuf 2007, 38(7):1722-1728.
40. Nomura T., Yamada T. Structural observation on wood and bamboo by X-ray. Wood Res 1972, 52:1-12.
41. Oakley J. Eliciting Gaussian process priors for complex computer codes. Statistician 2002, 51(1):81-97.
42. Oakley J.E., O'Hagan A. Bayesian inference for the uncertainty distribution of computer model outputs. Biometrika 2002, 89:769-784.
43. Oakley J.E., O'Hagan A. Probabilistic sensitivity analysis of complex models: a Bayesian approach. J Royal Stat Soc 2004, B66(3):751-769.
44. O'Hagan A. Bayesian statistics 4. Some Bayesian numerical analysis 1992, Oxford University Press, Cambridge (UK).
45. O'Loinsigh C., Oudjene M., Shotton E., Pizzi A., Fanning P. Mechanical behaviour and 3D stress analysis of multi-layered wooden beams made with welded-through wood dowels. Compos Struct 2012, 94(2):313-321.
46. Orso S., Wegst U., Arzt E. The elastic modulus of spruce wood cell wall material measured by an in situ bending technique. J Mater Sci 2006, 41(16):5122-5126.
47. Oudjene M., Meghlat E.-M., Ait-Aider H., Batoz J.-L. Non-linear finite element modelling of the structural behaviour of screwed timber-to-concrete composite connections. Compos Struct 2013, 102(0):20-28.
48. Perić D., de Souza Neto E.A., Feijóo R.A., Partovi M., Molina A.J.C. On micro-to-macro transitions for multi-scale analysis of non-linear heterogeneous materials: unified variational basis and finite element implementation. Int J Numer Methods Eng 2011, 87(1-5):149-170.
49. Peura M., Grotkopp I., Lemke H., Vikkula A., Laine J., Müller M., et al. Negative poisson ratio of crystalline cellulose in kraft cooked Norway spruce. Biomacromolecules 2006, 7:1521-1528.
50. Peura M., Kölln K., Grotkopp I., Saranpää P., Müller M., Serimaa R. The effect of axial strain on crystalline cellulose in norway spruce. Wood Sci Technol 2007, 41(7):565-583.
51. Qing H., Mishnaevsky L. 3D multiscale micromechanical model of wood: from annual rings to microfibrils. Int J Solids Struct 2010, 47(9):1253-1267.
52. Qing H., Mishnaevsky H.L. A 3D multilevel model of damage and strength of wood: analysis of microstructural effects. Mech Mater 2011, 43(9):487-495.
53. Rafsanjani A., Derome D., Carmeliet J. Micromechanics investigation of hygro-elastic behavior of cellular materials with multi-layered cell walls. Compos Struct 2013, 95:607-611.
54. Rafsanjani A., Derome D., Guyer R.A., Carmeliet J. Swelling of cellular solids: from conventional to re-entrant honeycombs. Appl Phys Lett 2013, 102(21):211907.
55. Rafsanjani A., Derome D., Wittel F.K., Carmeliet J. Computational up-scaling of anisotropic swelling and mechanical behavior of hierarchical cellular materials. Compos Sci Technol 2012, 72:744-751.
56. Raghavan R., Adusumalli R.-B., Buerki G., Hansen S., Zimmermann T., Michler J. Deformation of the compound middle lamella in spruce latewood by micro-pillar compression of double cell walls. J Mater Sci 2012, 47(16):6125-6130.
57. Rasmussen C., Williams K. Gaussian processes for machine learning 2006, The MIT Press, Massachusetts Institute of Technology.
58. Reiterer A., Lichtenegger H., Fratzl P., Tschegg S. Deformation and energy absorption of wood cell walls with different nanostructure under tensile loading. J Mater Sci 2001, 36:4681-4686.
59. Reiterer A., Lichtenegger H., Tschegg S., Fratzl P. Experimental evidence for a mechanical function of the cellulose microfibril angle in wood cell walls. Philos Mag 1999, A79(9):2173-2184.
60. Rougier J. Probabilistic inference for future climate using an ensemble of climate model evaluations. Clim Change 2007, 81(3):247-264.
61. Saavedra Flores E.I., de Souza Neto E.A. Remarks on symmetry conditions in computational homogenisation problems. Eng Comput 2010, 27(4):551-575.
62. Saavedra Flores E.I., de Souza Neto E.A., Pearce C. A large strain computational multi-scale model for the dissipative behaviour of wood cell-wall. Comput Mater Sci 2011, 50(3):1202-1211.
63. Saavedra Flores E.I., DiazDelaO F.A., Friswell M.I., Sienz J. A computational multi-scale approach for the stochastic mechanical response of foam-filled honeycomb cores. Compos Struct 2012, 94(5):1861-1870.
64. Saavedra Flores E.I., Friswell M.I. Multi-scale finite element model for a new material inspired by the mechanics and structure of wood cell-walls. J Mech Phys Solids 2012, 60(7):1296-1309.
65. Saavedra Flores E.I., Friswell M.I. Ultrastructural mechanisms of deformation and failure in wood under tension. Int J Solids Struct 2013, 50(13):2050-2060.
66. Sacks J., Welch W., Mitchell T., Wynn H. Design and analysis of computer experiments. Stat Sci 1989, 4(4):409-435.
67. Salmén L. Micromechanical understanding of cell-wall structure. CR Biol 2004, 327(9-10):873-880.
68. Santner T., Williams B., Notz W. The design and analysis of computer experiments 2003, Springer.
69. Tabiei A., Wu J. Three-dimensional nonlinear orthotropic finite element material model for wood. Compos Struct 2000, 50(2):143-149.
70. Timell T. Recent progress in the chemistry and topochemistry of compression wood. Wood Sci Technol 1982, 16(2):83-122.
71. Washusen R., Evans R. The association between cellulose crystallite width and tension wood occurrence in eucalyptus globulus. IAWA J 2001, 22(3):235-243.
72. Xu P., Donaldson L.A., Gergely Z.R., Staehelin L.A. Dual-axis electron tomography: a new approach for investigating the spatial organization of wood cellulose microfibrils. Wood Sci Technol 2007, 41(2):101-116.
73. Zhang X., Zhao Q., Wang S., Trejo R., Lara-Curzio E., Du G. Characterizing strength and fracture of wood cell wall through uniaxial micro-compression test. Compos Part A: Appl Sci Manuf 2010, 4(5):632-638.