Mechanical behaviour and 3D stress analysis of multi-layered wooden beams made with welded-through wood dowels

Composite Structures

Volumn 94, Issue 2, 2012, Pages 313-321

  O'Loinsigh, Cian ^a   Oudjene, Marc ^b   Shotton, Elisabeth ^a   Pizzi, Antonio ^b   Fanning, Paul ^a  

^a UNIVERSITY COLLEGE DUBLIN   (Ireland)

^b UNIVERSITÉ DE LORRAINE   (France)

Author keywords

Constitutive law; Finite element analysis (FEA); Layered structures; Numerical modelling; Welding joining; Wood

Indexed keywords

BENDING STIFFNESS; CONSTITUTIVE LAW; EXPERIMENTAL STUDIES; FE MODEL; GEOMETRIC PARAMETER; LAYERED STRUCTURES; MECHANICAL BEHAVIOUR; MECHANICAL PERFORMANCE; MULTI-LAYER BEAM; MULTI-LAYERED; NUMERICAL INVESTIGATIONS; POLY(VINYL ACETATE) (PVAC); TIMBER BEAM; WOOD DOWELS;

FINITE ELEMENT METHOD; NUMERICAL MODELS; STRESS ANALYSIS; WELDING; WOOD; WOODEN BEAMS AND GIRDERS; WOODEN CONSTRUCTION;

THREE DIMENSIONAL;

DOWELS; FINITE ELEMENT ANALYSIS; STRESS ANALYSIS; STRUCTURES; THREE DIMENSIONAL DESIGN; WELDING; WOOD;

EID: 84866324790     PISSN: 02638223     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compstruct.2011.08.029     Document Type: Review

References (22)

1. Anshari B, Guan Z, Komatsu K, Kitamori A, Jung K. Explore novel ways to strengthen glulam beams by using compressed Japanese cedar. In: Proceedings of the world conference on timber engineering (WCTE), 20-24 June 2010, Riva del Garda, Trentino, Italy; 2010. 8 p.
2. Issa Camille A., Kmeid Z. Advanced wood engineering: glulam beams. Constr Build Mater 2005, 19:99-106.
3. Guan Z.W., Rodd P.D., Pope D.J. Study of glulam beams pre-stressed with pultruded GRP. Comput Struct 2005, 83:2476-2487.
4. Anshari B, Guan Z, Komatsu K. Finite element modelling of the pre-camber of glulam beams reinforced by compressed wood. In: Proceedings of the world conference on timber engineering (WCTE), 20-24 June 2010, Riva del Garda, Trentino, Italy; 2010. 6 p.
5. Yahyaei-Moayyed M., Taheri F. Creep response of glued-laminated beam reinforced with pre-stressed sub-laminated composite. Constr Build Mater 2011, 25:2495-2506.
6. Toratti Tomi, Schnabl Simon, Turk Goran Reliability analysis of a glulam beam. Struct Safety 2007, 29:279-293.
7. Hansson M., Larsen H.J. Recent failures in glulam structures and their causes. Eng Fail Anal 2005, 12:808-818.
8. Dilik T., Hiziroglu S. Effect of density and some of the production parameters on bending strength of laminated window profiles. Build Environ 2004, 39:1199-1205.
9. Guan ZW, Komatsu K, Jung K, Kitamori A. Structural characteristics of beam-column connections using compressed wood dowels and plates. In: Proceedings of the world conference on timber engineering (WCTE), 20-24 June 2010, Riva del Garda, Trentino, Italy; 2010. 6 p.
10. Pizzi A., Leban J.M., Kanazawa F., Properzi M., Pichelin F. Wood dowel bonding by high-speed rotation welding. J Adhes Sci Technol 2004, 18(11):1263-1278.
11. Vaziri M., Lindgren O., Pizzi A., Mansouri H. Moisture sensitivity of scots pine joints produced by linear frictional welding. J Adhes Sci Technol 2010, 24(8):1515-1527. [13 p].
12. Kanazawa F., Pizzi A., Properzi M., Delmotte L., Pichelin F. Parameters influencing wood-dowel welding by high-speed rotation. J Adhes Sci Technol 2005, 19(12):1025-1038.
13. Jung K., Kitamori A., Komatsu K. Evaluation on structural performance of compressed wood as shear dowel. J Wood Sci 2008, 62:461-467.
14. Hassel I., Berard P., Komatsu K. Development of wooden shear wall-improvement of stiffness by utilizing elements of densified wood. Holzforchung 2008, 62:584-590.
15. Bocquet J.F., Pizzi A., Despres A., Mansouri H.R., Resch L., Michel D., et al. Wood joints and laminated wood beams assembled by mechanically-welded wood dowels. J Adhes Sci Technol 2007, 21(3-4):301-317.
16. Xu B.H., Bouchaïr A., Taazount M., Vega E.J. Numerical and experimental analyses of multiple-dowel steel-to-timber joints in tension perpendicular to grain. Eng Struct 2009, 31(10):2357-2367.
17. Oudjene M., Khelifa M. Finite element modelling of wooden structures at large deformations and brittle failure prediction. Mater Des 2009, 30(10):4081-4087.
18. Oudjene M., Khelifa M. Elasto-plastic constitutive law for wood behaviour under compressive loadings. Constr Build Mater 2009, 23(11):3359-3366.
19. Oudjene M., Khelifa M., Segovia C., Pizzi A. Application of numerical modelling to dowel-welded wood joints. J Adhes Sci Technol 2010, 24:359-370.
20. Oudjene M, Khelifa M. Experimental and numerical analysis of single double shear dowel-type timber joints. In: Proceedings of the world conference on timber engineering (WCTE), 20-24 June 2010, Riva del Garda, Trentino, Italy; 2010. 6 p.
21. Oudjene M., Batoz J.-L., Penazzi L., Mercier F. A methodology for the 3D stress analysis and the design of layered sheet metal forming tools joined by screws. J Mater Proc Technol 2007, 189:334-343.
22. Oudjene M., Penazzi L., Batoz J.-L. Towards the three-dimensional FE analysis of rapid prototyping tools for sheet metal stamping process. Finite Elem Anal Des 2007, 43:611-619.