Analysis of the effect of al on the static softening kinetics of C-Mn steels using a physically based model

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 45, Issue 2, 2014, Pages 934-947

  Aretxabaleta, Zaloa ^a   Pereda, Beatriz ^a   López, Beatriz ^a  

^a CEIT   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

AUSTENITE-TO-FERRITE PHASE TRANSFORMATION; DEFORMATION CONDITIONS; DEFORMATION TEMPERATURES; GRAIN-BOUNDARY MOBILITY; PHYSICALLY BASED MODELING; RECOVERY AND RECRYSTALLIZATION; SOFTENING BEHAVIOR; STATIC RECRYSTALLIZATION;

ALUMINUM; DEFORMATION; GRAIN BOUNDARIES; MANGANESE;

KINETICS;

EID: 84896694225     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-013-2014-2     Document Type: Article

References (45)

1. C.M. Sellars: Mater. Sci. Technol., 1990, vol. 6, pp. 1072-81.
2. A.I. Fernandez, P. Uranga, B. Lopez, and J.M. Rodriguez-Ibabe: ISIJ Int., 2000, vol. 40, pp. 893-901.
3. P.D. Hogson and R.K. Gibbs: ISIJ Int., 1992, vol. 32, pp. 1329- 38.
4. H.S. Zurob, C.R. Hutchinson, Y. Brechet, and G. Purdy: Acta Mater., 2002, vol. 50, pp. 3075-92.
5. M.G. Akben, B. Bacroix, and J.J. Jonas: Acta Metall., 1983, vol. 31, pp. 161-74.
6. H.L. Andrade, M.G. Akben, and J.J. Jonas: Metall. Trans. A, 1983, vol. 14A, pp. 1967-77.
7. N. Maruyama, R. Uemori, and M. Sugiyama: Mater. Sci. Eng. A, 1998, vol. 250, pp. 2-7.
8. M. Gomez, C.I. Garcia, D.M. Haezebrouck, and A.J. DeArdo: ISIJ Int., 2009, vol. 49, pp. 302-11.
9. M. De Meyer, D. Vanderschueren, and B.C. De Cooman: ISIJ Int., 1999, vol. 39, pp. 813-22.
10. P.J. Jacques, E. Girault, A. Mertens, B. Verlinden, J. van Huumbeeck, and F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1061-67.
11. A.K. Srivastava, D. Bhattacharjee, G. Jha, N. Gope, and S.B. Singh: Mater. Sci. Eng. A, 2007, vols. 445-446, pp. 549-57.
12. E.I. Poliak and F. Siciliano: MS&T 2004 Conference Proceedings, New Orleans, 2004, pp. 39-45.
13. P.P. Suikkanen, V.T.E. Lang, M.C. Somani, D.A. Porter, and L.P. Karjalainen: ISIJ Int., 2012, vol. 52, pp. 471-76.
14. A.I. Fernandez, B. Lopez, and J.M. Rodriguez-Ibabe: Scripta Mater., 1999, vol. 40, pp. 543-49.
15. Thermodynamic Database TCFE6 - TCS Steels/Fe-Alloys Database, Thermo-Calc.
16. G. Glover and C.M. Sellars: Metall. Trans., 1972, vol. 3, pp. 2271- 80.
17. E.J. Giordani, A.M. Jorge, and O. Balancin: Scripta Mater., 2006, vol. 55, pp. 743-46.
18. K.B. Kang, O. Kwon, W.B. Lee, and C.G. Park: Scripta Mater., 1997, vol. 36, pp. 1303-08.
19. J.H. Beynon and C.M. Sellars: ISIJ Int., 1992, vol. 32, pp. 359-67.
20. R. Abad, A.I. Fernandez, B. Lopez, and J.M. Rodriguez-Ibabe: ISIJ Int., 2001, vol. 41, pp. 1373-82.
21. Z. Aretxabaleta, B. Pereda, S.V. Parker, and B. Lopez: in Proceedings of 4th International Conference on Thermomechanical Processing of Steels, Sheffield, 2012.
22. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 1st ed., Pergamon Press, Oxford, 1995, pp. 188-95.
23. G. Saada: Acta Metall., 1960, vol. 8, pp. 841-47.
24. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps, Pergamon Press, Oxford, 1982, pp. 60-70.
25. M. Verdier, Y. Brechet, and P. Guyot: Acta Mater., 1999, vol. 47, pp. 127-34.
26. E. Nes: Prog. Mater. Sci., 1998, vol. 41, pp. 129-93.
27. E. Nes: Acta Metall. Mater., 1995, vol. 43, pp. 2189-207.
28. A. Yoshie, T. Fujita, M. Fujioka, K. Okamoto, and H. Morikawa: ISIJ Int., 1996, vol. 36, pp. 467-73.
29. S. Sarkar and M. Militzer: Mater. Sci. Technol., 2009, vol. 25, pp. 1134-46.
30. A. Smith, A. Miroux, J. Sietsma, and S. Van Der Zwaag: Steel Res., 2006, vol. 77, pp. 595-602.
31. G. Arieta and C.M. Sellars: Scripta Metall. Mater., 1994, vol. 30, pp. 707-12.
32. H. Zurob: Ph.D. Thesis, McMaster University, Canada, 2003.
33. D. Turnbull: Trans. Am. Inst. Min. Eng., 1951, vol. 191, pp. 661-65.
34. J.W. Cahn: Acta Metall., 1962, vol. 10, pp. 789-98.
35. E.A. Simielli, S. Yue, and J.J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 597-608.
36. A.H. Cottrell: Dislocations and Plastic Flow in Crystals, Oxford University Press, Oxford, 1953, p. 57.
37. H.S. Zurob, C.R. Hutchinson, Y. Brechet, and G.R. Purdy: Mater. Sci. Eng. A, 2004, vol. 382A, pp. 64-81.
38. C. Iparragirre, A.I. Fernandez, J.M. Rodriguez-Ibabe, and B. Lopez: Mater. Sci. Forum, 2007, vols. 539-543, pp. 4119-24.
39. M. Gomez, L. Rancel, and S.F. Medina: Mater. Sci. Eng. A, 2009, vol. 506A, pp. 165-73.
40. V. Burachinsky and J.R. Cahoon: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 563-82.
41. L. Lissel, G. Engberg, and U. Borggren: in Proceedings of the 3rd International Conference on Thermomechanical Processing of Steels, 2008, Associazione Italiana di Metallurgia, Padua, 2001.
42. J.J. Jonas: in Proceedings of international Conference on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals, THERMEC-88, Tokyo, 1988, pp. 59-69.
43. J.J. Jonas:, in High Strength Low Alloy Steels, D.P. Dunne and T. Chandra, eds., University of Wollongong, Wollongong, 1984, pp. 80-91.
44. H.J. McQueen, S. Yue, N.D. Ryan, and E. Fry: J. Mater. Process. Technol., 1995, vol. 53, pp. 293-310.
45. M. Oyarzabal, A. Martinez de Guerenu, and I. Gutierrez: Mater. Sci. Eng. A, 2008, vol. 485A, pp. 200-09.