Microstructure evolution model for hot strip rolling of Nb-Mo microalloyed complex phase steel

Materials Science and Technology

Volumn 25, Issue 9, 2009, Pages 1134-1146

  Sarkar, S ^a   Militzer, M ^a  

^a UNIVERSITY OF BRITISH COLUMBIA   (Canada)

Author keywords

Complex phase steel; Hot rolling; Microstructure; Phase transformation; Process modelling

Indexed keywords

ADDITIVITY RULES; CARBON ENRICHMENT; COMPLEX PHASE STEEL; COMPLEX-PHASE STEELS; CONSTITUTIVE BEHAVIOUR; COOLING STRATEGY; EARLY GROWTH; EXPERIMENTAL STUDIES; FERRITE FRACTION; FERRITE TRANSFORMATION; HOT-STRIP ROLLING; JOHNSON-MEHL-AVRAMI-KOLMOGOROV APPROACHES; KOCKS-MECKING MODEL; LAW OF MIXTURE; MARTENSITE FRACTION; MICROSTRUCTURE EVOLUTION MODEL; MICROSTRUCTURE MODEL; PHASE TRANSFORMATION; PRECIPITATION STRENGTHENING; PROCESS MODELLING; RECRYSTALLISATION; RUN-OUT TABLE; SOFTENING KINETICS;

AUSTENITE; BAINITE; BAINITIC TRANSFORMATIONS; COMPUTATIONAL COMPLEXITY; FERRITE; HOT ROLLING MILLS; METAL WORKING; MICROSTRUCTURE; MOLYBDENUM; MOLYBDENUM COMPOUNDS; NIOBIUM; NIOBIUM COMPOUNDS; STEEL; STRIP METAL; WEAR RESISTANCE;

HOT ROLLING;

EID: 70349094521     PISSN: 02670836     EISSN: None     Source Type: Journal    
DOI: 10.1179/174328409X453271     Document Type: Article

References (58)

1. A. J. DeArdo: Int. Mater. Rev., 2003, 48, 371-402.
2. M. Militzer: Science, 2002, 298, 975-976.
3. J. Shaw, B. Engl, C. Espina, E. C. Oren and Y. Kawamoto: in New steel sheets and steel bar products and processing, SAE-SP 1685, (ed. D. W. Anderson et al.), 63-71; 2002, Warrendale, PA, SAE.
4. I. Y. Pyshmintsev, C. Mesplont, S. Jacobs and B. C. de Cooman: Steel Res., 2002, 73, 392-402.
5. R. Priestner and M. S. Biring: Met. Sci., 1973, 7, 60-64.
6. C. Mesplont, S. Vandeputte and B. C. De Cooman: Proc. 43rd Mechanical Working and Steel Processing Conf., Vol.XLIII, Warrendale, PA, USA, 2001, ISS, 359-371.
7. Advanced high strength steel (AHSS) application guidelines, report, Version 3, International Iron and Steel Institute, Committee on Automotive Application, September, 2006.
8. Advanced high strength steel (AHSS) application guidelines, report, Version 3, International Iron and Steel Institute, Committee on Automotive Application, September, 2006. 8. C. M. Sellars and J. A Whiteman: Met. Sci., 1979, 13, 187-194.
9. C. M. Sellars: Sheffield Int. Conf. on "Working and forming processes", (ed. C. M. Sellars and G. J. Davies), 3-15; 1980, London, Met. Soc.
10. M. Suehiro, K. Sato, Y. Tsukano, H. Yada, T. Senuma and Y. Matsumura: Trans. ISIJ, 1987, 27, 439-445.
11. J. H. Beynon and C. M. Sellars: ISIJ Int., 1992, 32, 359-367.
12. O. Kwon, K. J. Lee, J. K. Lee, K. B. Kang, J. K. Kim, J. D. Lee and J. Kim: in HSLA Steels95, (ed. G. Liu et al.), 82-89; 1995, Beijing, China Science & Technology Press.
13. J. Andorfer, D. Auzinger, B. Buchmayr, W. Giselbrecht, G. Hribernig, G. Hubmer, A. Luger and A. Samoilov: Thermec97, (ed. T. Chandra and T. Sakai), 2069-2075; 1997, Warrendale, PA, TMS.
14. I. V. Samarasekera, D. Q. Jin and J. K. Brimacombe: Proc. 38th Mechanical Working Steel Processing Conf., Vol.XXXIV, Warrendale, PA, USA, 1997, ISS, 313-327.
15. A. J. Trowsdale, K. Randerson, P. F. Morris, Z. Husain and D. N. Crowther: Ironmaking Steelmaking, 2001, 28, 170-174.
16. Y. Saito: Mater. Sci. Eng A, 1997, A223, 134-145.
17. A. Perlade, D. Grandemange and T. Iung: Ironmaking Steelmaking, 2005, 32, 299-302.
18. Y. J. Lan, D. Z. Li, X. C. Sha and Y. Y. Li: Steel Res. Int., 2004, 75, 462-467.
19. P. D. Hodgson and R. K. Gibbs: ISIJ Int., 1992, 32, 1329-1338.
20. B. Buchmayr, A. Samoilov, L. Lachmann and G. Aigmuller: Proc. 1st Int. Conf. on Modelling of metal rolling process, 134-148; 1993, London, The Institute of Materials.
21. M. Pietrzyk: J. Mater. Proc. Technol., 2002, 125-126, 53-62.
22. M. Militzer, E. B. Hawbolt and T. R. Meadowcroft: Metall. Mater. Trans. A, 2000, 31A, 1247-1259.
23. D. Liu, M. Militzer and W. J. Poole: Mater. Sci. Forum, 2007, 539-543, 4391-4396.
24. D. Liu, F. Fazeli and M. Militzer: ISIJ Int., 2007, 47, 1789-1798.
25. A. Samoilov, Y. Titovets, N. Zolotorevskii, G. Hribernig and P. Stiaszny: Proc. 2nd Int. Conf. on Processing materials for properties, (ed. B. Mishra and C. Yamauchi), 639-643; 2000, Warrendale, PA, TMS.
26. F. Fazeli and M. Militzer: Steel Res., 2002, 73, 242-248.
27. F. Fazeli and M. Militzer: Solid-solid phase transformations in inorganic materials 2005, (ed. J. M. Howe et al.), 835-841; 2005, Warrendale, PA, TMS.
28. H. N. Han and S.-H. Park: Mater. Sci. Technol., 2001, 17, 721-726.
29. D. Liu, F. Fazeli, M. Militzer and W. J. Poole: Metall. Mater. Trans. A, 2007, 38A, 894-909.
30. D. Siodlak, U. Lotter, R. Kawalla and G. Paul: Steel Res. Int., 2005, 76, 815-821.
31. S. Sarkar, W. J. Poole and M. Militzer: Advances in materials and materials processing (ICAMMP-2006), (ed. U. K. Chatterjee and B. K. Dhindaw), 682-692; 2006, Kharagpur, IIT.
32. S. Sarkar, M. Militzer, W. J. Poole and A. Moreau: in Advanced steels, (ed. J. A. Szpunar and H. Li), 119-130; 2006, Montreal, PQ, The Metallurgical Society of CIM.
33. S. Sarkar, A. Moreau, M. Militzer and W. J. Poole: Metall. Mater. Trans., 2008, 39A, 897-907.
34. F. S. LePera: JOM, 1980, 32 (3), 38-39.
35. - 1994 annual book of ASTM standard, E112-881994, 3?01, ASTM, 227.
36. A. Giumelli, M. Militzer and E. B. Hawbolt: ISIJ Int., 1999, 39, 271-280.
37. U. F. Kocks and H. Mecking: Prog. Mater. Sci., 2003, 48, 171-273.
38. H. J. Frost and M. F. Ashby: Deformation mechanism maps, 20; 1982, Oxford, Pergamon Press.
39. M. Onink, C. M. Brakman, F. D. Tichelaar, E. J. Mittemeijer, S. van der Zwaag, J. H. Root and N. B. Konyer: Scr. Metall. Mater., 1993, 29, 1011-1016.
40. H. S. Zurob, C. R. Hutchinson, Y. Brechet and G. Purdy: Acta Mater., 2002, 50, 3075-3092.
41. S. Sarkar, M. Militzer, W. J. Poole and F. Fazeli: Proc. Int. Symp. on Advanced high-strength and other specialty sheet steel products for the automotive industry, MST07, AIST/TMS, Warrendale, PA, USA, 2007, 61-72.
42. P. Guyot, M. Verdier and Y. Brechet: Acta Mater., 1998, 47, 127-134.
43. M. Pietrzyk: Mater. Process Technol., 2002, 125-126, 53-62.
44. W. P. Sun, M. Militzer, E. B. Hawbolt and T. R. Meadowcroft: Trans. ISS, 1998, 25, (5), 85-94.
45. F. J. Humphreys and M. Hatherly: Recrystallization and related annealing phenomena 2nd edn; 1996, Oxford, Pergamon Press Ltd.
46. M. Militzer: ISIJ Int., 2007, 47, 1-15.
47. N. A. Gjostein, H. A. Domian, H. I. Aaronson and E. Eichen: Acta Metall., 1966, 14, 1637-1644.
48. K. M. Wu, M. Kagayama and M. Enomoto: Mater. Sci. Eng. A, 2003, A343, 143-150.
49. E. S. Humphreys, H. A. Fletcher, J. D. Hutchins, A. J. Garratt-Reed, W. T. Reynolds, H. I. Aaronson, G. R. Purdy and G. D. W. Smith: Metall. Mater. Trans. A, 2004, 35A, 1223-1235.
50. S. Lacroix, Y. Brechet, M. Veron, D. Quidort, M. Kandel and T. Iung: Austenite formation and decomposition, (ed. E. B. Damm and M. J. Merwin), 367-379; 2003, Warrendale, PA, TMS.
51. M. Militzer, R. Pandi and E. B. Hawbolt: Metall. Mater. Trans. A, 1996, 27A, 1547-1556.
52. J. Å gren: Scr. Metall., 1986, 20, 1507-1510.
53. A. Ali and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 1990, 6, 781-784.
54. M. Militzer, W. J. Poole and W. P. Sun: Steel Res., 1998, 69, 279-285.
55. N. Nakata and M. Militzer: ISIJ Int., 2005, 45, 82-90.
56. H. Shercliff and M. F. Ashby: Acta Metall. Mater., 1990, 38, 1789-1802.
57. M. Charleux, W. J. Poole, M. Militzer and A. Deschamps: Metall.Mater. Trans. A, 2001, 32A, 1635-1647.
58. M. Militzer, S. Sarkar, K. Mukherjee, H. Azizi-Alizamini andW. J.Poole: Proc. New Developments on Metallurgy and Applications of High Strength Steels, 2008, Buenos Aires, SAM association Argentina de Materiales.