Liquid oil and residual characteristics of printed circuit board recycle by pyrolysis

Journal of Hazardous Materials

Volumn 271, Issue , 2014, Pages 258-265

  Lin, Kuo Hsiung ^a   Chiang, Hung Lung ^b  

^a FOOYIN UNIVERSITY   (Taiwan)

^b CHINA MEDICAL UNIVERSITY   (Taiwan)

Author keywords

Pyrolysis oil; Residues; Water soluble ionic species

Indexed keywords

ATOMIC EMISSION SPECTROSCOPY; BROMINE; CARBON; GAS CHROMATOGRAPHY; HYDROGEN; INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY; LIQUID CHROMATOGRAPHY; NITROGEN; ORGANIC POLLUTANTS; PHOSPHORUS; POLYCHLORINATED BIPHENYLS; PRINTED CIRCUIT BOARDS; PYROLYSIS; SPECTROMETERS; SULFUR;

ENERGY DISPERSIVE X-RAY SPECTROMETERS; INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETERS; INSTRUMENTAL NEUTRON ACTIVATION ANALYSIS; PYROLYSIS OIL; RESIDUES; TRACE ELEMENT COMPOSITION; WASTE PRINTED CIRCUIT BOARD (PCBS); WATER-SOLUBLE IONIC SPECIES;

LIQUIDS;

3 BROMOPHENOL; 4 PROPAN 2 YLPHENOL; AMMONIA; BROMIDE; BROMINE; CARBON; COPPER; HYDROGEN; IRON; MAGNESIUM; NITROGEN; OIL; ORTHO CRESOL; PHENOL DERIVATIVE; PHOSPHATE; PHOSPHORUS; SULFUR; TIN; UNCLASSIFIED DRUG; METAL; POLYCHLORINATED BIPHENYL;

CARBON; GAS CHROMATOGRAPHY; HYDROGEN; INDUCTIVELY COUPLED PLASMA METHOD; NEUTRON ACTIVATION ANALYSIS; NITROGEN; PYROLYSIS; SORPTION; X-RAY SPECTROSCOPY;

ARTICLE; ATOMIC EMISSION SPECTROMETRY; LIMIT OF DETECTION; LIQUID; MASS FRAGMENTOGRAPHY; MASS SPECTROMETRY; MOISTURE; NEUTRON ACTIVATION ANALYSIS; PYROLYSIS; QUALITY CONTROL; RECYCLING; THERMAL CONDUCTIVITY; X RAY SPECTROMETRY; COMPUTER; ELECTRICAL EQUIPMENT; ELECTRONIC WASTE; HEAT; PROCEDURES; WASTE MANAGEMENT;

COMPUTERS; ELECTRICAL EQUIPMENT AND SUPPLIES; ELECTRONIC WASTE; HOT TEMPERATURE; METALS; OILS; POLYCHLORINATED BIPHENYLS; RECYCLING; WASTE MANAGEMENT;

EID: 84896086590     PISSN: 03043894     EISSN: 18733336     Source Type: Journal    
DOI: 10.1016/j.jhazmat.2014.02.031     Document Type: Article

References (39)

1. UNEP United Nations Environment Programme 1, Press Release, Urgent Need to Prepare Developing Countries for Surge in e-Wastes 2010, February 22, 2010, available at: http://www.unep.org/Documents.Multilingual/Default.asp?DocumentID=612&ArticleID=6471.
2. Robinson B. E-waste: an assessment of global production and environmental impacts. Sci. Total Environ. 2009, 408:183-191.
3. UNEP United Nations Environmental Programme Recycling - From e-Waste to Resources - Final Report 2009, 2009. Sustainable Innovation and Technology Transfer Industrial Sector Studies.
4. Das A., Vidyadhar A., Mehrotra S.P. A novel flowsheet for the recovery of metal values from waste printed circuit boards. Resour. Conserv. Recycl. 2009, 53:464-469.
5. LaDou J. Printed circuit board industry. Int. J. Hyg. Environ. Health 2006, 209:211-219.
6. Owens C.V., Lambright C., Bobseine K. Identification of estrogenic compounds emitted from the combustion of computer printed circuit boards in electronic waste. Environ. Sci. Technol. 2007, 41:8506-8511.
7. European Union (EU), Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment, available at http://eurlex.europa.eu/LexUriServ/site/en/oj/2003/l_037/l_03720030213en00190023.pdf.
8. EU, Directive 2011/65/EC of the European Parliament and of the Council of 8 Jun 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment, available at http://eur-lex.europa.eu/LexUriServ/LexUriServ.do%3Furi=OJ%3AL%3A2011%3A174%3A0088%3A0110%3Aen%3Apdf.
9. Leung A.O.W., Duzgoren-Aydin N.S., Cheung K. Heavy metals concentrations of surface dust from e-waste recycling and its human health implications in southeast China. Environ. Sci. Technol. 2008, 42(7):2674-2680.
10. Sepúlveda A., Schluepc M., Renauda F.G., Streicherc M., Kuehrd R., Hagelükene C., Gereckef A.C. A review of the environmental fate and effects of hazardous substances released from electrical and electronic equipments during recycling: examples from China and India. Environ. Impact Assess. 2010, 30:28-41.
11. EU, Directive, 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE) (Text with EEA relevance).
12. Xiu F.R., Qi Y., Zhang F.S. Recovery of metals from Waste printed circuit boards by supercritical water pre-treatment combined with acid leaching process. Waste Manage. 2013, 33:1251-1257.
13. Zeng X., Li J., Xie H., Liu L. A novel dismantling process of waste printed circuit boards using water-soluble ionic liquid. Chemosphere 2013, 93:1288-1294.
14. Kantarelis E., Yang W., Blasiak W., Forsgren C., Zabaniotou A. Thermochemical treatment of E-waste from small household appliances using highly pre-heated nitrogen-thermogravimetric investigation and pyrolysis. Appl. Energ. 2011, 88:922-929.
15. Zhang S., Yoshikawa K., Nakagome H., Kamo T. Kinetics of the steam gasification of a phenolic circuit board in the presence of carbonates. Appl. Energ. 2013, 101:815-821.
16. Alian A., Sansoni B. A review on activation analysis of air particulate matter. Radioanal. J. Nucl. Chem. 1985, 89:191-275.
17. Ke Y.H., Yang E.T., Liu X., Liu C.L., Dong W.S. Preparation of porous carbons from non-metallic fractions of waste printed circuit boards by chemical and physical activation. New Carbon Mater. 2013, 28:108-114.
18. Jie G., Ying-Shun L., Mai-Xi L. Product characterization of waste printed circuit board by pyrolysis. J. Anal. Appl. Pyrol. 2008, 83:185-189.
19. de Marco I., Caballero B.M., Chomón M.J., Laresgoiti M.F., Torres A., Fernández G., Arnaiz S. Pyrolysis of electrical and electronic wastes. J. Anal. Appl. Pyrol. 2008, 8:179-183.
20. Quan C., Li A., Gao N. Synthesis of carbon nanotubes and porous carbons from printed circuit board waste pyrolysis oil. J. Hazard. Mater. 2010, 179:911-917.
21. Zhou Y., Wu W., Qiu K. Recovery of materials from waste printed circuit boards by vacuum pyrolysis and vacuum centrifugal separation. Waste Manage. 2010, 30:2299-2304.
22. Long L., Sun S., Zhong S., Dai W., Liu J., Song W. Using vacuum pyrolysis and mechanical processing for recycling waste printed circuit boards. J. Hazard. Mater. 2010, 177:626-632.
23. Charvátová H., Janáčová D., Fialka M., Kolomazník K. Mass analysis of the components separated from printed circuit boards. Acta Montanist. Slov. Ročník 2010, 1:58-61.
24. Guo Q., Yue X., Wang M., Liu Y. Pyrolysis of scrap printed circuit board plastic particles in a fluidized bed. Powder Technol. 2010, 198:422-428.
25. Sun J., Wang W., Liu Z., Ma C. Study of the transference rules for bromine in waste printed circuit boards during microwave-induced pyrolysis. J. Air Waste Manag. Assoc. 2011, 61:535-542.
26. Ren Z., Bi X., Huang B., Liu M., Sheng G., Fu J. Hydroxylated PBDEs and brominated phenolic compounds in particulate matters emitted during recycling of waste printed circuit boards in a typical e-waste workshop of South China. Environ. Pollut. 2013, 177:71-77.
27. Zhu P., Chen Y., Wang L., Qian G., Zhang W.J., Zhou M., Zhou J. Dissolution of brominated epoxy resins by dimethyl sulfoxide to separate waste printed circuit boards. Environ. Sci. Technol. 2013, 47:2654-2660.
28. Bergman Å., Rydén A., Law R.J., de Boer J., Covaci A., Alaee M., Birnbaum L., Petreas M., Rose M., Sakai S., Van den Eede N., Veen van der I. A novel abbreviation standard for organobromine, organochlorine and organophosphorus flame retardants and some characteristics of the chemicals. Environ. Int. 2012, 49:57-82.
29. Yin J., Li G., He W., Huang J., Xu M. Hydrothermal decomposition of brominated epoxy resin in waste printed circuit boards. J. Anal. Appl. Pyrol. 2011, 92:131-136.
30. Hall W.J., Williams P.T. Separation and recovery of materials from scrap printed circuit boards. Resour. Conserv. Recycl. 2007, 51:691-709.
31. Bradna P., Zima J. The use of pyrolysis-gas chromatography mass-spectroscopy in the analysis of cured polyfunctional epoxy-resins. J. Anal. Appl. Pyrol. 1991, 21:207-220.
32. Hall W.J., Williams P.T. Processing waste printed circuit boards for material recovery. Circuit World 2007, 33:43-50.
33. Hornung A., Donner S., Balabanovich A., Seifert H. Polypropylene as a reductive agent for dehalogenation for brominate organic compounds. J. Clean Prod. 2005, 13:525-530.
34. Chien Y.C., Wang H.P., Lin K.S., Huang Y.J., Yang Y.W. Fate of bromine in pyrolysis of printed circuit board wastes. Chemosphere 2000, 40:383-387.
35. 3 in brominated heating impact polystyrene (HIPS-Br) on thermal degradation and debromination by iron oxide carbon composite catalyst (Fe-C). Appl. Catal. B: Environ. 2003, 43:229-241.
36. Luda M.P., Balabanovich A.I., Camino G. Thermal decomposition of the retardant brominated epoxy resins. J. Anal. Appl. Pyrol. 2002, 65:25-40.
37. Balabanovich A.I., Hornung A., Merz D., Seifert H. The effect of a curing agent on the thermal degradation of fire retardant brominated epoxy resins. Polym. Degrad. Stabil. 2004, 85:713-723.
38. Shangguan D. Lead-Free Solder Interconnect Reliability 2005, ASM International, Materials Park, OH.
39. Zeng K., Stierman R., Abbott D., Murtuza M. The root cause of black pad failure of solder joints with electroless Ni/immersion gold plating. JOM 2006, 58:75-79.