Computational techniques: The multiphase CFD approach to fluidization and green energy technologies

Computational Techniques: The Multiphase CFD Approach to Fluidization and Green Energy Technologies

Volumn , Issue , 2009, Pages 1-642

  Gidaspow, Dimitri ^a   Jiradilok, Veeraya ^b  

^a Ilinois Institute of Technology   (United States)

^b GreatPoint Energy   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84895849164     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (424)

1. Collatz, L. (1966). Functional Analysis and Numerical Mathematics. New York: Academic Press.
2. Newman, J. (1973). Electrochemical systems. Englewood Cliffs, N.J., Prentice-Hall.
3. Perry, R.H., and D.W. Green (1997). Perry's Chemical Engineers' Handbook. 7th Ed. New York: McGraw-Hill.
4. Riggs, J.B. (1988). An Introduction to Numerical Methods for Chemical Engineers. Texas: Texas Tech University Press.
5. Roy, D., and D. Gidaspow (1974). "Nonlinear Coupled Heat and Mass Exchange in a Cross-Flow Regenerator," Chem. Eng. Sci. 39, 2102-2114.
6. Scarborough, J.B. (1962). Numerical Mathematical Analysis. 5th Ed. Baltimore: Johns Hopkins Press.
7. Bird R.B., W.E. Stewart, and E.N. Lighfoot (1962). Transport Phenomena. New York: John Wiley.
8. Bryne G.D., and A.C. Hindmarsh (1999). "PVODE, an ODE Solver for Parallel Computers," The International Journal of High Performance Computing Applications 13(4), 354-365.
9. Distefano, G.P. (1968). "Stability of Numerical Integration Techniques," AIChE Journal 14(6), 946-955.
10. Frank-Kamenetskii, D.A. (1955). Diffusion and Heat Exchange in Chemical Kinetics. 1st Ed. Princeton University Press.
11. Gill W.N., E. del Casal, and D.W. Zeh (1965). "Binary Diffusion and Heat Transfer in Laminar Free Convection Boundary Layers on a Vertical Plate," Int. J. Heat Mass Transfer 8, 1135-1151.
12. Hindmarsh, A.C. (1974). GEAR: Ordinary differential equation system solver. Rep. UICD-30001, Rev. 3, Univ. of California, Lawrence Livermore Laboratories, Lawrence, California.
13. Ince, E.L. (1926). Ordinary Differential Equations. New York: Dover Publication.
14. Isaacson, E., and H.B. Keller (1966). Analysis of Numerical Methods. New York: J. Wiley and Sons.
15. Jain, R.K. (1972). "Some A-Stable Methods for Stiff Ordinary Differential Equations," Mathematics of Computation 26(117), 71-77.
16. Perry, R.H. (1950). Chemical Engineers' Handbook. 3rd Ed. New York: McGraw-Hill.
17. Radbill, J.R., and G. McCue (1970). Quasilinearization and Nonlinnear Problems in Fluid and Orbital Mechanics. 1st Ed, American Elsevier.
18. Ralston A., and H.S. Wilf (1960). Mathematical Methods for Digital Computers, Chapter 9, edited by M.J. Romanelli, "Runge-Kutta Methods for the Solution of Ordinary Differential Equations", Volume I, New York: John Wiley.
19. Reid, R.C., and T.K. Sherwood (1958). The Properties of Gases and Liquids. New York: McGraw-Hill.
20. Robert, E. T. (1955). Mass-Transfer Operations. New York: McGraw-Hill.
21. Richtmyer, R.D., and K.W. Morton (1957). Difference Methods for Initial Value Problems. New York: Interscience.
22. Samuelsen model (1939), Review of Economic Statistics 21, 75-78.
23. Schichting, H. (1964). Boundary Layer Theory. New York: McGraw-Hill.
24. Seinfeld, J.H., L. Lapidus, and M. Hwang (1970). "Review of Numerical Integration Techniques for Stiff Ordinary Differential Equations," Ind. Eng. Chem. Fundam. 9, 266-275.
25. Stanley, E. Lee. (1968). Quasilinearization and Invariant imbedding, Mathematics in science and engineering series No.41 edited by Richard Bellman, Academic press.
26. Anderson, D.A., J.C. Tannehill, and R.H. Pletcher (1984). Computational Fluid Mechanics and Heat Transfer. Washington: Hemisphere Pub. Corp.; New York: McGraw-Hill.
27. Batchelor, G.K. (1954) "Heat Transfer by Free Convection across a Closed Cavity between Vertical Boundaries at Different Temperatures," Q. Appl. Math. 12, 209-233.
28. Carnahan, B., H.A. Luther, and J.O. Wilkes (1969). Applied Numerical Methods. New York: Wiley.
29. Churchill S.W. and students, (1963). 3rd Int. Heat Transfer Conference.
30. Poots, G. (1958). "Heat Transfer by Laminar Free Convection in Enclosed Plane Gas Layers," Q J Mechanics Appl Math 11, 257-273.
31. Richtmyer, R.D., and K.W. Morton (1957). Difference Methods for Initial-Value Problems. New York: Interscience
32. Roache, P.J. (1972). "On Artificial Viscosity," Journal of Computational Physics 10(2), 169-184.
33. Chase C. A., D. Gidaspow, and R. E. Peck (1969). "Adiabatic Adsorption in a Regenerator," CEP Symp. Series 96(65), 34-47.
34. Chase C. A., D. Gidaspow, and R. E. Peck (1970). "Transient Heat and Mass Transfer in an Adiabatic Regenerator-A Green's Matrix Representation," Int. J. Heat and Mass Transfer 13, 817-833.
35. Chase, C.A., D. Gidaspow, and R.E. Peck (1969). "Adiabatic Adsorption in A Regenerator," Ch.E. Progress Symposium Series 65(96), 34-47.
36. Rhee, H.K., R. Aris, and N.R. Amundson (1986). First-Order partial Differential Equations. Volume 1, Prentice Hall.
37. Abbott, M.B (1966). An Introduction to the Method of Characteristics. New York: Elsevier.
38. Callen, H.B. (1960). Thermodynamics. New York: John Wiley and Sons.
39. Carslaw, H.S., and J.C. Jaeger (1959). Conduction of Heat in Solids. 2nd Ed. London, U.K.: Oxford University Press.
40. Chase, C.A., D. Gidaspow, and R.E. Peck (1969). "Adiabatic Adsorption in a Regenerator," CEP Symp. Series No.96 65, 34-47.
41. Chase, C.A., D. Gidaspow, and R.E. Peck (1970). "Transient Heat and Mass Transfer in an Adiabatic Regenerator: A Green's Matrix Representation," Int.. J. Heat and Mass Transfer 13, 817-833.
42. Collatz, L. (1966). Functional Analysis and Numerical Mathematics, translated from the German by H. Oser. New York: Academic Press.
43. Courant, R., and K.O. Friedrichs (1948). Supersonic Flow and Shock Waves. New York: Interscience.
44. Courant, R., and D. Hilbert (1962). Methods of Mathematical Physical Vol II: Partial Differential Equations. New York: Wiley-Interscience.
45. Courant, R., K.O. Friedrichs, and H. Lewy, (1928). "Uber die partiallen Differenzengleichungen der mathematischen Physik,", edited by David Hilbert, Albert Einstein, Otto Blumenthal, Constantin Caratheodory, Math. Ann. 100, p32.
46. Garabedian, P.R (1964). Partial Differential Equations. New York: John Wiley and Sons.
47. Ghezelayagh, H., and D. Gidaspow (1982). "Micron-Macropore Model for Sorption of Water on Silica Gel in a Dehumidifier," Chem. Eng. Sci. 37, 1181-1197.
48. Gidaspow, D. (1974). chairman of round table discussion; Modeling of Two-Phase Flow, 5th International Heat Transfer Conference, Tokyo, Japan, pp 163-168 in Heat Transfer 1974, Vol II, Japan, JME-SCEJ.
49. Gidaspow, D., R.W. Lyczkowski, C.W. Solbrig, E.D. Hughes, and G.A. Mortensen (1973). "Characteristic of Unsteady One-Dimensional Two-Phase Flow," Trans American Nuclear Society 17, 249-250.
50. Gidaspow, D., F. Rasouli, and Y.W. Shin (1983). "An Unequal Velocity Model for Transient Two-Phase Flow by the Method of Characteristics," Nucl. Sci. and Eng. 84, 179-195.
51. Gidaspow, D. (1994). Multiphase flow and fluidization: continuum and kinetic theory descriptions, Academic Press.
52. Koo, H., and K.K. Kuo (1977). Transient Combustion in Granular Propellant Beds Part I: Theoretical Modeling and Numerical Solution of Transient Combustion Processes in Mobile Granular Propellant Beds, Final report of Feb. 15, 1974- Feb. 14, 1977 from BRL-CR, Ballistic Research Laboratory, AD-A044998, Aberdeen Proving Ground. Aberdeen, Maryland.
53. Ladyzenskaya, O.A. (1952). Solution of Cauchy's problem for hyperbolic systems by the method of the finite differences, Leningrad Gos. Univ. Uch. Zap, Vol. 144 (ser. Mat) p. 192.
54. Ladyzenskaya, O.A. (1962). "Method of finite differences in the theory of particle differential equations," Amer. Math. Soc. Translation, series 2 Vol. 20, p. 77.
55. Lax, P. D. (1957). "Asymptotic solution of oscillatory initial value problem," Duke. Math. J. 24, 627.
56. Lax, P.D. (1958). "Differential equations, difference equations, matrix theory," Comm. Pure. Appl. Math 11, 175.
57. Lax, P.D., and Richtmyer, R.D. (1956). "Survey of stability of linear finite difference equations," Comm. Pure. App. Math. 9, 267.
58. Lyczkowski, R.W., D. Gidaspow, and C.W. Solbrig (1982). Multiphase Flow Models for Nuclear, Fossil and Biomass Energy Production, pp 198-351 in A.S. Majurndar and R.A. Mashelkar, eds. Advances in Transport Process Vol. II. New York: Wiley-Eastern Publisher.
59. Menger, K. (1955). Calculus: A Modern Approach. Boston: Ginn.
60. Moore, K.V., and W.H. Retting (1973). A computer Program for Transient Thermal Hydraulic Analysis, Aerojet Nuclear Co., RELAP-4 available from the National Technical Information Service.
61. Pal, S. K. (1969). Numerical solution of first solution of first order hyperbolic systems of particle differential equations, Ph.D. thesis, University of Toronto, Canada.
62. Petrovsky, I.G. (1957). Lectures on the Theory of Integral Equations. Translated from Russian 2d rev. ed. by Hyman Kamel and Horace Komm. Rochester, New York, Graylock Press.
63. Rasouli, F.D., D. Gidaspow, and Y.W. Shin (1982). "Unequal Velocity, Two Component, Two Phase Flow by the Method of Characteristics," Argonne National Laboratory Report, ANL-83-98. Argonne, Illinois;
64. also see F. Rasouli, Ph.D. Thesis, Chicago, Illinois Institute of Technology.
65. Rhee, H. K., R. Aris, and N.R. Amundson (1986). First Order Partial Differential Equations, Vol I. Englewood Cliffs, N.J.: Prentice Hall.
66. Richtmyer, R.D., and K.W. Morton (1957). Difference Methods for Initial Value Problems. New York: Interscience.
67. Roy, D., and D. Gidaspow (1972). "A Cross Flow Regenerator: A Green's Matrix Representation," Chem. Eng. Sci. 27, 779-793.
68. Roy, D., and D. Gidaspow (1974). "Nonlinear Coupled Heat and Mass Exchange in a Cross-Flow Regenerator," Chem. Eng. Sci. 29, 2101-2114.
69. Sneddon, I.A. (1957). Elements of Partial Differential Equations. New York: McGraw-Hill.
70. Wilkinson, J. H. (1965). The Algebraic Eigenvalue Problem. Oxford University Press, Oxford.
71. Avidan, A.A. (1997). Circulating Fluidized Beds, edited by J.R. Grace, A.A. Avidan, T.M. Knowlton. 1stEd. London; New York: Blackie Academic and Professional.
72. Avidan, A.A., and J. Yerushalmi (1985). "Solids Mixing in an Expanded Top Fluid Bed," AIChE. J. 31(5), 835-841.
73. Balucani, U., and M. Zoppi (1994). Dynamics of the Liquid State. Oxford: Clarendon Press; New York: Oxford University Press.
74. Bader R., J. Findlay, and T.M. Knowlton (1988). "Gas/Solid Flow Patterns in a 30.5-cm-Diameter Circulating Fluidized Bed," Circulating Fluidized Bed Technology II, Pergamon Press, 123-137.
75. Bagnold, R.A. (1954). "Experiments on a Gravity Free Dispersion of Large Solid Spheres in a Newtonian Fluid under Shear," Proc. R. Soc. London 225, 49-63.
76. Berruti, F., J. Chaouki, L. Godfroy, T.S. Pugsley, and G.S. Patience (1995). "Hydrodynamics of Circulating Fluidized Bed Risers: A Review," Canadian J. Chem. Eng. 73(5), 579-602.
77. Bi, H.T., N. Ellis, I.A. Abba, and J.R. Grace (2000). "A State-of-the-Art Review of Gas-Solid Turbulent Fluidization," Chem. Eng. Sci. 55(21), 4789-4825.
78. Bhusarapu, S., P. Fongarland, M.H. Al-Dahhan, and M.P. Duduković (2004). "Measurement of Overall Solids Mass Flux in a Gas-Solid Circulating Fluidized Bed," Powder Technol. 148(2-3 SPEC. ISS.), 158-171.
79. Breault, R.W. (2006). "A Review of Gas-Solid Dispersion and Mass Transfer Coefficient Correlations in Circulating Fluidized Beds," Powder Technol. 163(1-2), 9-17.
80. Breault, R.W., C.P. Guenther, and L.J. Shadle (2008). "Velocity Fluctuation Interpretation in the Near Wall Region of a Dense Riser," Powder Technol. 182, 137-145.
81. Buyevich, Y.A., and G.D. Cody (1998). "Particle Fluctuations in Homogeneous Fluidized Beds," Brighton World Congress on Particle Technology-3, Brighton, UK.
82. Buyevich, Y.A., and S.K. Kapbasov (1994). "Random Fluctuations in a Fluidized Bed," Chem. Eng. Sci. 49(8), 1229-1243.
83. Brady, J.F. (1994). "Macroscopic Modeling of Viscous Suspension Flows," Appl. Mech. Rev.. 47, 229.
84. Carnahan, N.F., and K.E. Starling (1969). "Equation of State for Nonattracting Rigid Spheres," Journal of Chemical Physics 51(2), 635-636.
85. Degaleesan, S., M.P. Dudukovic, B.A Toseland, and B.L. Bhatt (1997). "A Two-Compartment Convective-Diffusion Model For Slurry Bubble Column Reactors," Ind. Eng. Chem. Res. 36(11), 4670-4680.
86. Driscoll, M.C. (2007). A Study of the Fluidization of FCC and Nanoparticles in a Rectangular Bed and a Riser, Ph.D Thesis, Illinois Institute of Technology, Chicago.
87. Driscoll, M.C., and D. Gidaspow (2006). "Wave Propagation and Granular Temperature in Fluidized Beds of Nano and FCC Particles," AIChE Annual Meeting, Conference Proceedings.
88. Du, B., L.S. Fan, F. Wei, and W. Warsito (2002). "Gas and Solids Mixing in a Turbulent Fluidized Bed," AIChE J. 48(9), 1896-1909.
89. Egelstaff, P.A. (1967). An Introduction to the Liquid State. New York: Academic Press.
90. Galtier, P.A., R.J. Pontier, and T. E. Patereaux (1989). "Near Full-Scale Cold Flow Model for the R2R Catalytic Cracking Process," Engineering Foundation, Fluidization VI, 17-23.
91. Gidaspow, D., B. Ettehadieh, and J. Bouillard (1984). Hydrodynamics of Fluidization: Bubbles and Gas Compositions in the U-gas Process, AIChE. Symposium Series 80(241), 57-64.
92. Gidaspow, D. (1994). Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions, California: Academic Press.
93. Gidaspow, D., and L. Huilin (1996). "Collisional Viscosity of FCC Particles in a CFB," AlChE. J. 42(9), 2503-2510.
94. Gidaspow, D., and L. Huilin (1998). "Equation of State and Radial Distribution Functions of FCC Particles in a CFB," AlChE. J. 44(2), 279-291.
95. Gidaspow, D., and R. Mostofi (2003). "Maximum Carrying Capacity and Granular Temperature of A, B, C Particles," AIChE. J. 49(4), 831-843.
96. Gidaspow, D., J. Jung, and R.K. Singh (2004). "Hydrodynamics of Fluidization using Kinetic Theory: an Emerging Paradigm 2002 Flour-Daniel Lecture," Powder Technol. 148, 123-141.
97. Gidaspow, D., and M. Driscoll (2007). "Wave Propagation and Granular Temperature in Fluidized Beds of Nanoparticles," AIChE J. 53(7), 1718-1726.
98. Gidaspow, D., and M. Driscoll (2008). "Porosity and Pressure Waves in a Fluidized Bed of FCC Particles," Ind. Eng. Chem. Res., Articles ASAP (As Soon As Publishable) Publication Date (Web): August 5, 2008 (Article) DOI: 10.1021/ie0716262.
99. Godfroy, L., F. Larachi, and J. Chaouki (1999). "Position and Velocity of a Large Particle in a Gas/Solid Riser using the Radioactive Particle Tracking Technique," The Canadian Journal of Chemical Engineering 77, 253-261.
100. Goldschmidt, M.J.V., R. Beetstra, and J.A.M. Kuipers (2002). "Hydrodynamic Modelling of Dense Gas-Fluidised Beds: Comparison of the Kinetic Theory of Granular Flow with 3D Hard-Sphere Discrete Particle Simulations," Chem. Eng. Sci. 57(11), 2059-2075.
101. Hansen, J.P., and I.R. McDonald (1991). Theory of Simple Liquids. San Diego: Academic Press.
102. Hinze, H.O. (1959). Turbulence. New York: McGraw-Hill.
103. Horio, M. (1997). "Hydrodynamics," Circulating Fluidized Beds, edited by J.R. Grace, A.A. Avidan, and T.M. Knowlton, 1stEd. London; New York: Blackie Academic and Professional, 21-86.
104. Huilin, L., W. Shuyan, Z. Yunhua, L. Yang, D. Gidaspow, and J. Ding (2005). "Prediction of Particle Motion in a Two-Dimensional Bubbling Fluidized Bed using Discrete Hard-Sphere model," Chem. Eng. Sci. 60(12), 3217-3231.
105. Hunter, R.J. (1989). Foundation of Colloid Science II. Oxford: Oxford Science Publications.
106. Jeffrey, D.J., and A. Acrivos (1976). "Rheological Properties of Suspensions of Rigid Particles," AIChE. J. 22 (3), 417-432.
107. Jin, Y., J.X. Zhu, and Z.Q. Yu (1997). Novel Configurations and Variants, Circulating Fluidized Beds, London: Blackie Academic and Professionals.
108. Jiradilok, V., D. Gidaspow, S. Damronglerd, W.J. Koves, and R. Mostofi (2006). "Kinetic Theory based CFD Simulation of Turbulent Fluidization of FCC Particles in a Riser," Chem. Eng. Sci. 61, 5544-5559.
109. Jiradilok, V., D. Gidaspow, and R.W. Breault (2007). "Computation of Gas and Solids Dispersion Coefficients in Turbulent Risers and Bubbling Beds," Chem. Eng. Sci. 62(13), 3397-3409.
110. Jiradilok, V., D. Gidaspowa, R. W. Breault, L. J. Shadle, C. Guenther, and S. Shi (2008). "Computation of turbulence and dispersion of cork in the NETL riser," Chemical Engineering Science 63, 2135-2148.
111. Jung, J. (2003). Design and Understanding of Turbulent, Bubbling and Slurry Bubble Column Reactors, Ph.D. Thesis, Illinois Institute of Technology, Chicago.
112. Jung, J., D. Gidaspow, and I.K. Gamwo (2005). "Measurement of Two Kinds of Granular Temperatures, Stresses and Dispersion in Bubbling Beds," Ind. Eng. Chem. Res. 44(5), 1329-1341.
113. Kim, J., P. Moin, and R. Moser (1987). "Turbulence statistics in fully developed channel flow at low Reynolds number," J. Fluid Mech. 177, 133-166.
114. King, D. (1992). "Fluidized catalytic crackers: An engineering review", Fluidization VII, edited by O.E. Potter, and D.J. Nicklin, 15-26.
115. Knowlton, T.M. (1977). "High Pressure Fluidization Characteristics of Several Particulate Solids, Primarily Coal and coal-derived materials," Fluidization Theories and Application, edited by J.S. Halow, New York, Am. Inst. Chem. Engrs. 73(161), 22-28.
116. Kunii, D. and O. Levenspiel (1991). Fluidization Engineering, 2ndEd. Boston: Butterworth-Heinemann.
117. Leighton, D. and I. Rampall (1993). "Measurement of the Shear-Induced Microstructure of Concentrated Suspensions of Non-Colloidal Spheres," Particulate Two-Phase Flow, edited by M.C. Roco, Boston: Butterworth- Heinemann, 190-208.
118. Li, Y., and M. Kwauk (1980). "The Dynamics of Fast Fluidization", in Fluidization III, edited by J.R. Grace and J.M. Matsen, New York: Plenum Press, 537-544.
119. Liu, J., J.R. Grace, H. Bi, H. Morikawa, and J. Zhu (1999). "Gas Dispersion in Fast Fluidization and Dense Suspension Upflow," Chem. Eng. Sci. 54(22), 5441-5449.
120. Limtrakul, S., J. Chen, P.A. Ramachandran, and M.P. Duduković (2005). "Solids Motion and Holdup Profiles in Liquid Fluidized Beds," Chem. Eng. Sci. 60(7), 1889-1900.
121. Matsen, J.M. (2000). Drift Flux Representation of Gas-Particle Flow, Powder Technol. 111(1-2), 25-33.
122. Mei, J.S., E.R. Monazam, and L.J. Shadle (2006). "Flow Regime Study of a Light Material in an Industrial Scale Cold Flow Circulating Fluidized Bed," Journal of Energy Resources Technology, Transactions of the ASME 128(2), 129-134.
123. Mei, J.S., E.R. Monazam, and L.J. Shadle (2003). The Mapping of Flow Regimes for a Light Material: Cork, Proceeding of FBC 2003, 17th International Fluidized Bed Combustion Conference, May 18-21, Jacksonville, Florida, USA.
124. Miller, A., and D. Gidaspow (1992). "Dense Vertical Gas-Solid Flow in a Pipe," AIChE. J. 38, 1801-1815.
125. Miller, A.L. (1991). Dense Vertical Gas-Solid Flow in a Pipe, Ph.D. Thesis, Illinois Institute of Technology, Chicago.
126. Nicolai, R., P. M. Herbert, and L. Reh (1999). The Experimental Database AtETH Zurich: Contents, Accessibility, and Perspectives, Proc. 6th International Conference on Circulating Fluidized Beds, Winaburg, 22-27 August.
127. Nieuwland, J.J., R. Meijer, J.A.M. Kuipers, and W.P.M. Van Swaaij (1996). "Measurements of Solids Concentration and Axial Solids Velocity in Gas-Solid Two-Phase Flows," Powder Technol. 87(2), 127-139.
128. Patureaux, T., and D. Barthod (2000). "Usage of CFD Modelling for Improving an FCC Riser Operation," Oil and Gas Science and Technology 55(2), 219-225.
129. Potter, O.E. (1971). "Mixing," Fluidization, edited by J. F. Davidson and D. Harrison, Academic Press, 293-381.
130. Polashenski, W., and J.C. Chen (1999). "Measurement of Particle Stresses in Fast Fluidized Beds," Ind. Eng. Chem. Res. 38, 705-713.
131. Rhodes, M.J., T. Hiama, G. Cerutti, and D. Geldart (1989). "Non-Unifomities of Solids Flow in Risers of Circulating Fluidized Beds," Fluidization VI, Engineering Foundation, 73.
132. Rhodes, M.J., G. Amos, and H. Mineo (1993). "Gas Mixing in Gas-Solids Risers," Chem. Eng. Sci. 48(5), 943-949.
133. Roy, R., J.F. Davidson, and V.G. Tuponogov (1990). "The Velocity of Sound in Fluidised Beds," Chem. Eng. Sci. 45(11), 3233-3245.
134. Roy, S., A. Kemoun, M.H. Al-Dahhan, and M.P. Dudukovic (2005). "Experimental Investigation of Hydrodynamics in a Liquid-Solid Riser," AIChE. J. 51, 802-835.
135. Ruckenstein, E. (1964). "Homogeneous Fluidization," I andEC Fundamentals 3(3), 260-268.
136. Ruckenstein, E. (1966). "Nonhomogeneous Fluidization," I andEC Fundamentals 5(1), 139-141.
137. Samuelsberg, A., and B. Hjertager (1996). "Computational Modeling of Gas/Particle Flow in a Riser," AlChE. J. 42(6), 1536-1546.
138. Schugerl, K. (1971). "Rheological Behavior of Fluidized Systems", Fluidization, edited by J.F. Davidson and D. Harrison, Academic Press.
139. Schlichting, H.T. (1960). Boundary-Layer Theory, Mc Graw Hill.
140. Sherwood, T.K., and R.L. Pigford (1952). Eddy Diffusion, Chemical Engineering Series: Absorption and Extraction, 2nd Ed. McGraw-Hill.
141. Shi, Y.F., and L.T. Fan (1985). "Lateral Mixing of Solids in Gas-Solid Fluidized Beds with Continuous Flow of Solids," Powder Technol. 41(1), 23-28.
142. Sinclair, J.L., and R. Jackson (1989). "Gas-Particle Flow in a Vertical Pipe with Particle-Particle Interactions," AlChE. J. 35(9), 1473-1486.
143. Singh, R.K. (2003). Hydrodynamics of Fluidization of Binary Particles, M.S. Thesis, Illinois Institute of Technology, Chicago.
144. Squires, A.M., M. Kwauk, and A.A. Avidan (1985). "Fluid Beds: At Last, Challenging Two Entrenched Practices," Science 230, 1329-1337.
145. Sun, B., and W.J. Koves (1998). "Application of a Numerical Hydrodynamic Model in FCC Design," AIChE. Symposium Series Vol. II, Miami Beach, Nov. 15-20, 469.
146. Sun, B., and D. Gidaspow (1999). "Computation of Circulating Fluidized-Bed Riser Flow for the Fluidization VIII Benchmark Test," Ind. Eng. Chem. Res. 38, 787-792.
147. Tartan, M. (2003). Fluidization in a Riser: Granular Temperature and Stresses, Ph.D. Thesis, Illinois Institute of Technology, Chicago.
148. Tartan, M., and D. Gidaspow (2004). "Measurement of Granular Temperature and Stresses in Risers," AIChE. J. 50, 1760-1775.
149. Tsuo, Y.P., and D. Gidaspow (1990). "Computation of Flow Patterns in Circulating Fluidized Beds," AlChE. J. 36, 885-896.
150. Tullo, A.H. (2003). "Catalyzing GTL: Gas-to-liquids fuels are becoming a reality and looming as a robust market for catalysts," Chemical Engineering News, July, 18-19.
151. Wasan, D.T., W. Xu, A.D. Nikolov, and X. Chu (1996). "Role of Depletion and Surface-Induced Structural Forces in Fine Particle Separations," World Congr. of Chemical Engineering, San Diego, CA.
152. Weinstein, H., M. Shao, M. Schnitzlein, and R.K. Graff (1986). "Radial variation in void fraction in a fast fluidized bed," Fluidization V, Engineering Foundation, 329.
153. Werther, P. (1999). "Measurement techniques in fluidized beds," Powder Technol. 102(1), 15-36.
154. Xu, W., A.D. Nikolov, and D.T. Wasan (1996). "Structure and Stability of Food Emulsions as Probed by the Kossel Diffraction Technique," Ann. Meeting of the American Institute of Chemical Engineers, Chicago.
155. Yoshida, H.K., and N. Ise (1990). "Microscopic Observation and Quasielastic Light-Scattering Measurements of Colloid Crystals: Determination of the Radial Distribution Function and Structure Factor for the Two-State Structure," J. Amer. Chem. Suc. 112, 592.
156. Cercignani, C. (1969). Mathematical Methods in Kinetic Theory. New York: Plenum Press.
157. Chapman, S., and T.G. Cowling (1961). The Mathematical Theory of Non-Uniform Gases. Cambridge, U.K.: Cambridge University Press.
158. Condiff, D.W., W.K. Lu, J.S. Dahler (1965). "Transport Properties of Polyatomic Fluids, Dilute Gas of Perfectly Rough Spheres,"The Journal of Chemical Physics 42(10), 3445-3475.
159. Ding, J., and D. Gidaspow (1990). "A Bubbling Fluidization Model using Kinetic Theory of Granular Flow," AIChE J. 36, 523-538.
160. Gidaspow, D. (1994). Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions. California: Academic Press.
161. Gidaspow, D., and L. Huilin (1996). "Collisional Viscosity of FCC Particles in a CFB," AlChE. J. 42 (9), 2503-2510.
162. Gidaspow, D., and L. Huilin (1998). "Equation of State and Radial Distribution Functions of FCC Particles in a CFB," AlChE. J. 44(2), 279-291.
163. Gidaspow, D., J. Jung, and R.K. Singh (2004). "Hydrodynamics of Fluidization using Kinetic Theory: an Emerging Paradigm 2002 Flour-Daniel Lecture," Powder Technol. 148, 123-141.
164. Goldshtein, A., and M. Shapiro (1995). "Mechanics of Collisional Motion of Granular Material. Part 1. General Hydrodynamic Equations,"Journal of Fluid Mechanics 282, 75-114.
165. Jenkins, J.T., and S.B. Savage (1983). "A Theory for the Rapid Flow of Identical, Smooth, Nearly Elastic, Spherical Particles," J. Fluid Mech. 130, 187-202.
166. Jiradilok, V., D. Gidaspow, and R.W. Breault (2007). "Computation of Gas and Solids Dispersion Coefficients in Turbulent Risers and Bubbling Beds," Chem. Eng. Sci. 62 (13), 3397-3409.
167. Johnson, K.L. (1985). Contact Mechanics. Cambridge, U.K.: Cambridge University Press.
168. Savage, S.B., and D.J. Jeffrey (1981). "The Stress Tensor in a Granular Flow at High Shear Rates," J. Fluid Mech. 110, 255-272.
169. Strumendo M., Gidaspow D.and P. Canu (2005). "Method of moments for gas-solid flows: application to the riser," Circulating Fluidized Bed Technology VII. Proceedings of the 8th International Circulating Fluidized Bed Conference, Hangzhou, China, International Academic Publishers, pp 936-942.
170. Tartan, M., and D. Gidaspow (2004). "Measurement of Granular Temperature and Stresses in Risers," AIChE. J. 50, 1760-1775.
171. Benyahia, S. (2008). "Verification and Validation Study of Some Polydisperse Kinetic Theories," Chem. Eng. Sci. 63(23), 5672-5680.
172. Chapman, S., and T.G. Cowling (1961). The Mathematical Theory of Non-Uniform Gases. Cambridge, U.K.: Cambridge University Press.
173. Gidaspow, D., and M. Driscoll (2007). "Wave Propagation and Granular Temperature in Fluidized Beds of Nanoparticles," AIChE Journal 53(7), 1718-1726.
174. Farrell, M., C.K.K. Lun, and S.B. Savage (1986). "A Simple Kinetic Theory for Granular Flow of Binary Mixtures of Smooth, Inelastic, Spherical Particles," Acta Mechanica 63, 45-60.
175. Gidaspow, D. (1994). Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions. California: Academic Press.
176. Gidaspow, D., J. Jung, and R.K. Singh (2004). "Hydrodynamics of Fluidization using Kinetic Theory: an Emerging Paradigm 2002 Flour-Daniel Lecture," Powder Technol. 148, 123-141.
177. Gidaspow, D., and J. Huang (2009). "Kinetic Theory Based Model for Blood Flow and Its Viscosity," Annals of Biomedical Engineeing 37(8), 1534-1545.
178. Gidaspow, D., and S. Songprawat (2009). "Transport of LDL and HDL in Blood Vessels" preprinted for 2009 Annual AIChE metting, Nashville, Nov 2009.
179. Goldsmith, H.L., G.R. Cokelet, and P. Gaehtgens (1989). "Robin Fahraeus: Evolution of Concepts in Cardiovascular Physiology," Am. J. Physiol. 257, H1005-Hl015.
180. Hsiau, S.S., and M.L. Hunt (1996). "Granular Thermal Diffusion in Flows of Binary-Sized Mixtures," Acta Mechanica 114, 121-137.
181. Huang, J. (2009), Ph.D. thesis, Illinois Institute of Technology, Chicago.
182. Huang, J., D. Gidaspow, and R.W. Lyczkowski (2009). "Pulsatile Flow in a Coronary Artery Using Multiphase Kinetic Theory," Journal of Biomechanics 42, 743-754.
183. Huilin, L., D. Gidaspow, and E. Manger (2001). "Kinetic Theory of Fluidized Binary Granular Mixtures," Physical Review E 64: p 061301-1 to -8.
184. Huilin, L., and D. Gidaspow (2003). "Hydrodynamics of Binary Fluidization in a Riser: CFD Simulation using Two Granular Temperatures," Chem. Eng. Sci. 58, 377-3792.
185. Huilin, L., H. Yoring, D. Gidaspow, Y. Lidan, and Q. Ykun (2003a). "Size Segregation of Binary Mixture of Solids in Bubbling Fluidized Beds," Powder Technol. 134, 86-97.
186. Hulin, L., H. Yurong, and D. Gidaspow (2003b). "Hydrodynamic Modelling of Binary Mixture in a Gas Bubbling Fluidized Bed Using the Kinetic Theory of Granular Flow," Chem. Eng. Sci. 58, 1197-1205.
187. Iddir, H., and H. Arastoopour (2005). "Modeling of Multitype Particle Flow Using the Kinetic Theory Approach," AIChE. J. 51(6), 1620-1632.
188. Johnson, P.C., and R., Jackson (1987). "Frictional-Constitutive Relations for Granular Materials, with Application to Plane Shearing," J. Fluid Mech. 176, 67-93.
189. Jung, J., R.W. Lyczkowski, C.B. Panchal, and A. Hassanein (2006a). "Multiphase Hemodynamic Simulation of Pulsatile Flow in a Coronary Artery," Journal of Biomechanics 39, 2064-2073.
190. Jung J., A. Hassanein, and R.W. Lyczkowski (2006b). "Hemodynamic Computation Using Multiphase Flow Dynamics in a Right Coronary Artery," Annals of Biomedical Engineering 34, 393-407.
191. Khakhar, D.V., J.J. McCarthy, and J.M. Ottino (1999). "Mixing and Segregation of Granular Materials in Chute Flows," Chaos 9(3), 594-610.
192. Manger, E. (1996). Modeling and Simulation of Gas/Solids Flow in Curvilinear Coordinates. Ph.D thesis. Trondheim, Norway: Institutt for Prosessteknologi (ITP)/NTNU.
193. Neri, A., T.E. Ongaro, G. Macedonio, and D. Gidaspow (2003). "Multiparticle Simulation of Collapsing Volcanic Columns and Pyroclastic Flow," Journal of Geophysical Research 108, No.B4, doi:10.1029/2001JB000508.
194. Ottino, J.M., and D.V., Khakhar (2000). "Mixing and Segregation of Granular Materials," Annual Review of Fluid Mechanics 32, 55-91.
195. Phillips, R.J., R.C. Armstrong, R.A. Brown, A.L. Graham, and J.R. Abott (1992). "A Constitutive Equation for Concentrated Suspensions that Accounts for Shear-Induced Particle Migration," Phys. Fluids A 4, 30-40.
196. Rahaman, M.F., N. Jamal, and P.J. Witt (2003). "An unequal granular temperature kinetic theory: description of granular flow with multiple particle classes," Powder Technol. 138, 82-92.
197. Savage, S.B. (1983). "Granular flow at high shear rates," Theory of Dispersed Multiphase Flow, edited by R. E. Meyer. New York: Academic Press, pp. 339-358.
198. Sherwood, L. (2004). Human Physiology. 5th Ed. Thomson Learning, Inc.
199. Singh, R.K. (2003). Hydrodynamics of Fluidization of Binary Particles, M.S. Thesis, Illinois Institute of Technology, Chicago.
200. Songprawat, S. (2009). Ph.D. thesis, Illinois Institute of Technology, Chicago.
201. Syamlal, M. (1985). Multiphase Hydrodynamics of Gas-Solid Flow, Ph.D. Thesis, Illinois Institute of Technology, Chicago.
202. Tartan, M., and D. Gidaspow (2004). "Measurement of Granular Temperature and Stresses in Risers," AIChE. J. 50, 1760-1775.
203. Al-Adel, M.F., D.A. Saville, and S. Sundaresan (2002). "The Effect of Static Electrification on Gas-Solid Flows in Vertical Risers," Ind. Eng. Chem. Res. 41 (25), 6224-6234.
204. Arastoopour, H. (2001). "Numerical Simulation and Experimental Analysis of Gas/Solid Flow Systems: 1999 Fluor-Daniel Plenary Lecture," Powder Technol. 119 (2-3), 59-67.
205. Benyahia, S., H. Arastoopour, and T.M. Knowlton (2002). "Numerical simulation of a largescale circulating fluidized bed," Circulating Fluidized Bed Technology 7, 451-458.
206. Berruti, F., J. Chaouki, L. Godfroy, T.S. Pugsley, and G.S. Patience (1995). "Hydrodynamics of Circulating Fluidized Bed Risers: A Review," Canadian J. Chem. Eng. 73(5), 579-602.
207. Bird, R.B., W. E. Stewart, and E. N. Lightfoot (2002). Transport Phenomena. 2nd Ed. New York: Wiley.
208. Bouillard, J.X., R.W. Lyczkowski, and D. Gidaspow (1989). "Porosity Distributions in a Fluidized Bed with an Immersed Obstacle," AlChE. J. 35, 908-922.
209. Bowen, R.M. (1976). Theory of Mixtures, Continuum Physics. Vol. III, Academic Press.
210. Cody, G.D., D.J. Goldfarb, Jr. G.V. Storch, and A.N. Norris (1996). "Particle Granular Temperature in Gas Fluidized Beds," Powder Technol. 87, 211-232.
211. Collier, J.G. (1972). Convective Boiling and Condensation, 2nd Ed. McGraw-Hill Book Company (UK) Ltd.
212. Chapman, S., and T.G. Cowling (1961). The Mathematical Theory of Non-uniform Gases, 2nd Ed. Cambridge: Cambridge University Press.
213. Gidaspow, D., and M. Driscoll (2007). "Wave Propagation and Granular Temperature in Fluidized Beds of Nanoparticles," AIChE J. 53(7), 1718-1726.
214. Du, B., W. Warsito, and L.S. Fan (2004). "ECT Studies of the Choking Phenomenon in a Gas-Solid Circulating Fluidized Bed," AlChE. J. 50, 1386-1406.
215. Gelderbloom, S.J., D. Gidaspow, and R.W. Lyczkowski (2003). "CFD Simulation of Bubbling and Collapsing Fluidized Bed Experiments for Three Geldart Groups," AIChE. J. 49, 844-858.
216. Gidaspow, D. (1986). "Hydrodynamics of Fluidization and Heat Transfer: Supercomputer Modeling," Appl. Mech. Rev. 39, 1-23.
217. Gidaspow, D. (1994). Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions. California: Academic Press.
218. Gidaspow, D., and L. Huilin (1996). "Collisional Viscosity of FCC Particles in a CFB," AlChE. J. 42(9), 2503-2510.
219. Gidaspow, D., and L. Huilin (1997). "Liquid-Solid Fluidization Using Kinetic Theory," AlChE. Symposium Series 317(93), 12.
220. Gidaspow, D. (2003). "Hydrodynamics of Fluidization Using Kinetic Theory: An Emerging Paradigm," Recent Res. Dev. Chem. Eng. 5, 53-81.
221. Gidaspow, D., and R. Mostofi (2003). "Maximum Carrying Capacity and Granular Temperature of A, B, C Particles," AIChE. J. 49(4), 831-843.
222. Gidaspow, D., J. Jung, and R.K. Singh (2004). "Hydrodynamics of Fluidization using Kinetic Theory: an Emerging Paradigm 2002 Flour-Daniel Lecture," Powder Technol. 148, 123-141.
223. Jackson, R. (1985). "Hydrodynamic Stability of Fluid-Particle Systems," Fluidization, edited by J.F. Davidson and D. Harrison, Academic Press.
224. Johnson, P.C., and R. Jackson (1987). "Frictional-Constitutive Relations for Granular Materials, with Application to Plane Shearing," J. Fluid Mech. 176, 67-93.
225. Jackson, R. (2000). The Dynamics of Fluidized Particles (Cambridge Monographs on Mechanics), Cambridge New York: Cambridge University Press.
226. Jiradilok, V., D. Gidaspow, S. Damronglerd, W.J. Koves, and R. Mostofi (2006). "Kinetic Theory based CFD Simulation of Turbulent Fluidization of FCC Particles in a Riser," Chem. Eng. Sci. 61, 5544-5559.
227. Jung, J., and D. Gidaspow (2002). "Fluidization of Nano-Size Particles," J. Nanoparticle Research 4, 483-497.
228. Knowlton, T., D. Geldart, J. Masten, and D. King "Comparison of CFB hydrodynamic models," PSRI Challenge Problem Presented at the Eighth International Fluidization Conference.
229. Knowlton T., and R. Karri (2001). "Results of CFB riser modelling challenge problem.," AIChE Annual Meeting.
230. Kunii, D., and O. Levenspiel (1991). Fluidization Engineering, 2nd Ed. Butterworth-Heinemann.
231. Kuipers, J.A.M., B.P.B. Hoomans, and W.P.M. Van Swaaij (1998). "Discrete particle simulation of segregation phenomena in dense gas-fluidized beds," Fluidization 9, 485-492.
232. Mathiesen, V., T. Solberg, and B.H. Hjertager (2000). "Predictions of Gas/Particle Flow with an Eulerian Model Including a Realistic Particle Size Distribution," Powder Technol. 112 (1-2), 34-45.
233. Miller, A., and D. Gidaspow (1992). "Dense Vertical Gas-Solid Flow in a Pipe," AIChE. J. 38, 1801-1815.
234. Neri, A., and D. Gidaspow (2000). "Riser Hydrodynamics: Simulation Using Kinetic Theory," AIChE. J. 46, 52-67.
235. Schlichting, H.T. (1960). Boundary-Layer Theory. Mc Graw Hill.
236. Sinclair, J.L., and R. Jackson (1989). "Gas-Particle Flow in a Vertical Pipe with Particle-Particle Interactions," AlChE. J. 35(9), 1473-1486.
237. Sinclair J.L. (1997). "Hydrodynamic Modeling," Circulating Fluidized Beds, edited by J.R. Grace, A.A. Avidan, T.M. Knowlton, 1stEd. London; New York: Blackie Academic and Professional.
238. Soo, S.L. (1967). Fluid Dynamics of Multiphase Systems, Blaisdell Publishing Corporation.
239. Sun, B., and D. Gidaspow (1999). "Computation of Circulating Fluidized-Bed Riser Flow for the Fluidization VIII Benchmark Test," Ind. Eng. Chem. Res. 38, 787-792.
240. Syamlal, M. (1985). Multiphase Hydrodynamics of Gas-Solid Flow, Ph.D. Thesis, Illinois Institute of Technology, Chicago.
241. Tartan, M., and D. Gidaspow (2002). "Measurement of Radial Granular Temperature Distribution in Risers: Comparison to an Analytical solution," AIChE. Annual Indianapolis meeting, No. 140e.
242. Tartan, M. (2003). Fluidization in a Riser: Granular Temperature and Stresses, Ph.D. Thesis, Illinois Institute of Technology, Chicago.
243. Tartan, M., D. Gidaspow, and J. Jung (2003). "Measurement and Computation of Turbulence in Risers Using Kinetic Theory," Pro. FEDSM'03: 4th ASME_JSME Joint Fluids Engineering Conference, No. 45724.
244. Tartan, M., and D. Gidaspow (2004). "Measurement of Granular Temperature and Stresses in Risers," AIChE. J. 50, 1760-1775.
245. Tartan, M., D. Gidaspow, and V. Jiradilok (2009). "Kinetic Theory Explanation of a Circulating Fluidized Bed Ring Structure near Choking," Ind. Eng. Chem. Res. 48, 326-329.
246. Therdthianwong, A., and D. Gidaspow (1994). "Hydrodynamics and SO2 Sorption in a CFB Loop," Circulating Fluidized Bed Technology IV, edited by A.A. Avidan, 351-358.
247. Tsuo, Y.P., and D. Gidaspow (1990). "Computation of Flow Patterns in Circulating Fluidized Beds," AIChE. J. 36, 885-896.
248. Wallis, G.B. (1969). One Dimensional Two-Phase Flow, New York: McGraw-Hill
249. Wen, C. Y., and Y. H. Yu (1966). "Mechanics of Fluidization," Chem. Eng. Prog. Symp. Series 62, 100-111.
250. Aldis D. (1987). Reactive Multiple Phase Hydrodynamics. Ph.D. Thesis, Illinois Institute of Technology, Chicago.
251. Aldis D. and D. Gidaspow (1990). "Two Dimensional Analysis of a Dust Explosion," AIChE J. 36, 1087-1096.
252. Anderson J. D. Jr. (1995). "Computational Fluid Dynamics: The Basics with Applications," New York: Mc Graw Hill.
253. Aris, R. (1962). Vectors, Tensors, and the Basic Equations of Fluid Mechanics, Englewood Cliffs, N.J.: Prentice-Hall.
254. Barakat, H.Z., and J.A. Clark (1966). "Analytical and Experimental Study of the Transient Laminar Natural Convection Flows in Partially Filled Liquid Containers", Proceedings of the Third International Heat Transfer Conference, Vol. II, 152-162.
255. Book D.L., J.P. Boris, and K. Hain (1975). "Flux-Corrected Transport II: Generalizations of the Method," J. Comp. Physics 18, 248-283.
256. Boris J.P. and D.L. Book (1973). "Flux-Corrected Transport I: SHASTA, A Fluid Transport Algorithm that Works," J. Comp. Physics 11, 38-69.
257. Boris J.P. and D.L. Book (1976). "Flux-Corrected Transport III: Minimal-Error FCT Algorithms," J. Comp. Physics 20, 397-431.
258. Bowen R.M. (1976). "Theory of Mixtures," Continuum Physics Vol. III, edited by A. Eringen, New York: Academic Press.
259. Ding J. (1990). A Fluidizaton Model Using Kinetic Theory of Granular Flow", Ph.D. Thesis, Illinois Institute of Technology, Chicago.
260. Ding J. and D. Gidaspow (1990). "A Bubbling Fluidization Model Using Kinetic Theory of Granular Flow," AIChE J. 36, 523-538.
261. Ettehadieh B. (1982). Hydrodynamic Analysis of Gas-Solid Fluidized Beds. Ph.D. Thesis, Illinois Institute of Technology, Chicago.
262. Gamwo, I. (1992). Multi-Dimensional Hydrodynamic and Erosion Modeling of Fluidized Bed. Ph.D. Thesis, Illinois Institute of Technology, Chicago.
263. Gidaspow, D. (1994). Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions. California: Academic Press.
264. Gosman A.D., W.M. Pun, A.K.Runchal, D.B. Spalding, and M. Wolfstein (1969). Heat and Mass Transfer in Recirculating Flows. New York: Academic Press.
265. Harlow F.H., and A.A. Amdsen (1971). "A Numerical Fluid Dynamic Calculation Method for all Flow Speeds", J. Comp. Physics 8, 197-213.
266. Hirsch C. (1988). Numerical Computation of Internal and External Flows. Vol. I. Fundamentals of Numerical Discretization. New York: John Wiley & Sons.
267. Jameson A. (1989). "Computational Aerodynamics for Aircraft Design", Science 245, 361-371.
268. Jayaswal U. (1991). Hydrodynamics of Multiphase Flows: Separation, Dissemination and Fluidization. Ph.D. Thesis, Illinois Institute of Technology, Chicago.
269. Kashiwa, B.A., N.T. Padial, R.M. Rauenzahn, and W.B. Vanderheyden (1994). A cellcentered ICE method for multiphase flow simulation, Los Alamos National Laboratory Research Report, LA-UR-93-3922.
270. Kashiwa, B.A., M.W. Lewis, and T.L. Wilson (1996). Fluid-structure Interaction Modeling, Los Alamos National Laboratory, Report LA-13111-PR 1.
271. Lyczkowski, R.W., and D. Gidaspow (1971). "Accumulation and Continues Removal of Impurities in Fuel Cells. One Dimensional Model," AIChE J. 17, 1208-1214.
272. Lyczkowski, R.W., and D. Gidaspow (1971). "Two-Dimensional Inert Accumulation in Space Hydrogen-Oxygen Fuel Cells," AIChE J. 17, 1131-1140.
273. Patankar, S.V. (1980). Numerical Heat Transfer and Fluid Flow. Taylor and Francis, Hemisphere Publishing Corp.
274. Pape, R. (1996). Multiphase Reactive Flow Modeling Applied to Dispersed Explosive Systems in a Detonation Tube. Ph.D. Thesis, Illinois Institute of Technology, Chicago.
275. Richnyer, R.D., and K.W. Morton (1967). Difference Methods for Initial Value Problems. New York: Interscience.
276. Rivard W.C. and Torrey M.D., "K-FIX: A Computer Program for Transient, Two Dimensional, Two-Fluid Flow", Los Alamos Scientific Laboratory, LA-Nureg-6623, NRC-4, 1977.
277. Roache, P.J. (1972). Computational Fluid Dynamics. New Mexico: Herma Publishers.
278. Rowe, D.S. (1981). "Computational Methods for Transient Two-Phase Flow," ASME Short Course Notes, Heat Transfer Conference, Milwaukee, Wisconsin.
279. Stewart, H.B. and B. Wendroff (1984). "Two-Phase Flow: Models and Method," J. Comp. Physics 56, 363-409.
280. Sun, B. (1996). Simulation of Gas-Liquid and Gas-Solid Two Phase Flows. Ph.D. Thesis, Illinois Institute of Technology, Chicago.
281. Syamlal, M. (1985). Multiphase Hydrodynamics of Gas-Solid Flow. Ph.D. Thesis, Illinois Institute of Technology, Chicago.
282. Tsuo, Y. (1989). Computation of Flow Regimes in Circulating Fluidized Beds. Ph.D. Thesis, Illinois Institute of Technology, Chicago.
283. Wu, Y. (1996). Simulation of Methanol Synthesis in Slurry Bubble Column Reactors. Ph.D. Thesis, Illinois Institute of Technology, Chicago.
284. Arastoopour, H., (2001). "Numerical Simulation and Experimental Analysis of Gas/Solid Flow Systems: 1999 Flour-Daniel Plenary Lecture," Powder Technol. 119 59-67.
285. Avidan, A.A. (1997). Circulating Fluidized Beds, edited by J.R. Grace, A.A. Avidan, T.M. Knowlton, 1stEd. London; New York: Blackie Academic and Professional.
286. Cebeci, T., and A.M.O. Smith (1971). Analysis of Turbulent Boundary Layers. New York: Academic press.
287. Chien, S.F, (1992). "Empirical Correlation of Saturated Steam Properties," SPE Reservoir Engineering (Society of Petroleum Engineers) 7(2), 295-303.
288. Courant, R., E. Iasscson, and M. Rees, (1952). "On the Solution of Nonlinear Hyperbolic Differential Equations by Finite Differences," Communication in Pure and Applied Mathematics 5, 243.
289. Gidaspow, D. (1994). Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions, California: Academic Press.
290. Gidaspow, D., and V. Jiradilok (2007). "Nanoparticle Gasifier Fuel Cell for Sustainable Energy Future," Journal of Power Sources 166, 400-410.
291. Gidaspow, D., and J. Huang (2009). "Kinetic Theory Based Model for Blood Flow and Its Viscosity," Annals of Biomedical Engineeing 37(8), 1534-1545.
292. Harlow, F.H., and A.A. Amsden (1975). "Numerical Calculation of Multiphase Fluid Flow," J. Comput. Phys. 17, 19-52.
293. Jackson, R. (1994). "Progress Toward a Mechanics of Dense Suspensions of Solid Particles," AlChE Symp. Ser. 90(90), 1-14.
294. Jayaswal, U.K. (1991). Hydrodynamics of Multiphase Flows: Separation, Dissemination and Fluidization, Ph.D. Thesis, Illinois Institute of Technology, Chicago.
295. Jiradilok, V., D. Gidaspow, S. Damronglerd, W.J. Koves, and R. Mostofi (2006). "Kinetic Theory based CFD Simulation of Turbulent Fluidization of FCC Particles in a Riser," Chem. Eng. Sci. 61, 5544-5559.
296. Jung, J., R.W. Lyczkowski, C.B. Panchal, and A. Hassanein (2006a) "Multiphase Hemodynamic Simulation of Pulsatile Flow in a Coronary Artery," Journal of Biomechanics 39, 2064-2073.
297. Jung J., A. Hassanein, and R.W. Lyczkowski (2006b) "Hemodynamic Computation Using Multiphase Flow Dynamics in a Right Coronary Artery," Annals of Biomedical Engineering 34, 393-407.
298. Kuippers, J.A.M., B.P.B. Hoomans, and W.P.M. van Swaaij (1998). "Hydrodynamic Models of Gas-Fluidized Beds and Their Role for Design and Operation of Fluidized Bed Reactors," edited L.S. Fan, T.M. Knowlton, Fluidization, IX, Engineering Foundation, p. 15.
299. Lyczkowski, R.W., D. Gidaspow, and C.W. Solbrig (1982). "Multiphase Flow-Models for Nuclear, Fossil and Biomass Energy Conversion," Chapter in Vol. II of Advances in Transport Processes, edited by A. S. Majumdar and R. A. Mashelkar, Wiley-Eastern Publisher, pp 198-351.
300. Neri, A., T.E. Ongaro, G. Macedonio, and D. Gidaspow. (2003). "Multiparticle Simulation of Collapsing Volcanic Columns and Pyroclastic Flow," Journal of Geophysical Research B: Solid Earth 108(4), 2202, doi:10.1029/2001JB000508.
301. Noye, B.J. (1978). "An Introduction to Finite Difference Techniques," Numerical Simulation of Fluid motion, edited J. Noye, New York: North Holland Publ. Co, 1-112.
302. Rivard, W.C., and M.D. Torrey (1977). K-FIX: A Computer Program for Transient, Two-Dimensional, Two-Fluid Flow, Los Alamos, LA-NUREG-6623.
303. Syamlal, M. (1985). Multiphase Hydrodynamics of Gas-Solids Flow, Ph.D. Thesis, Illinois Institute of Technology, Chicago.
304. Tong, L.S. (1965). Boiling Heat Transfer and Two-Phase Flow, New York: John Wiley and Sons, Inc.
305. Mostofi, R. 2002 CFD simulations of particulate two-phase and three-phase flows by, Ph.D., Illinois Institute of Technology, Chicago, Illinois.
306. Beér, J.M. (2007). "High efficiency electric power generation: The environmental role," Progress in Energy and Combustion Science 33(2), 107-134.
307. Chuck, S.E. (1966). Electrochemical oxidation of carbon monoxide in a molten carbonate fuel cell. Master Thesis, Illinois Institute of Technology, Chicago.
308. Cooper, J.F., N. Cherepy, R. Upadhye, A. Pasternak, and M. Steinberg (2000). "Direct Carbon Conversion: Review of Production and Electrochemical Conversion of Reactive Carbons," Economics and Potential Impact on the Carbon Cycle. Report Number: UCRLID-141818, Dec 12.
309. Cooper, J.F. (2003). "Reactions of the Carbon Anode in Molten Carbonate Electrolyte, Lawrence Livermore National Laboratory," Conference Proceedings Direct Carbon Fuel Cell Workshop, July 30.
310. Cordiner, S., M. Feola, V. Mulone, F. Romanelli (2007). "Analysis of a SOFC energy generation system fuelled with biomass reformate," Applied Thermal Engineering 27(4), 738-747.
311. Dharia, D.J. (1977). "Molten carbonate fuel cell model," in: Proceeding 12th Intersociety Energy Conversion Engineering Conference, Vol. 1, Paper index no 779056, 337-340.
312. Dicks, A.L. (2006). "The role of carbon in fuel cells," Journal of Power Sources. 156, 128-141.
313. Ding, J, and D. Gidaspow (1990). "A bubbling fluidization model using kinetic theory of granular flow," A.I.Ch.E. Journal 36, 523-538.
314. Gidaspow, D. (1980). "Final report: Critical survey of mathematical modeling and experimental work in phosphoric acid and molten carbonate fuel cell," under contract No. DE AC02-76CH00016 with the United States Department of Energy, Brookhaven National Laboratory, Upton, New York. December.
315. Gidaspow, D. (1984). "Survey of mathematical modeling in phosphoric acid and molten carbonate fuel cell electrodes." in: H.C. Maru (Eds.), Proceeding of the symposium on porous electrodes: theory and practice, The Electrochemical Society, Inc., Vol. 84, 350-376.
316. Gidaspow, D. (1994). Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions. California: Academic Press.
317. Gidaspow, D, and V. Jiradilok (2007). "Nanoparticle gasifier fuel cell for sustainable energy future," Journal of Power Sources 166, 400-410.
318. Gorin, E. (1952). "Integrated gasification electrochemical system," U.S. Patent 2,581,651.
319. Hemmes, K. (2004). "Fuel Cells," in White RE, Vayenas (Eds.), Chapter in Modern Aspects of Electrochemistry, New York: Kluwer Acedemic/Plenum Publisher, Vol 37, 131-251.
320. Johnson, P.C., and R. Jackson (1987). "Frictional-collisional constitutive relations for granular materials, with application to plane shearing," Journal of Fluid Mechanics 176, 67-93.
321. Kuipers, J.A.M., W. Prins, and W.P.M. Van Swaaij (1992). "Numerical calculation of wallto-bed heat-transfer coefficients in gas-fluidized beds," AIChE Journal 38(7), 1079-1091.
322. Lackner, K.S., T.M. Yegulalp (2005). "Thermodynamic foundation of the zero emission concept," Mineral and Metallurgical processing 22(3),161-167.
323. Liebhafsky, H.A., and E.J. Cairns (1968). Fuel cells and fuel batteries. New York: Wiley.
324. Massachusetts Institute of Technology (2007). "The Future of Coal," Options for carbonconstrained world, http://web.mit.edu/coal/.
325. Neri, A, and D. Gidaspow (2000). "Riser Hydrodynamics: Simulation Using Kinetic Theory," A.I.Ch.E Journal 46, 52-67.
326. Panopoulos, K.D., L.E. Fryda, J. Karl, S. Poulou, and E. Kakaras (2006). "High temperature solid oxide fuel cell integrated with novel allothermal biomass gasification: Part I: Modelling and feasibility study," Journal of Power Sources 159(1), 570-585.
327. Panopoulos, K.D., L.E. Fryda, J. Karl, S. Poulou, and E. Kakaras (2006). "High temperature solid oxide fuel cell integrated with novel allothermal biomass gasification: Part II: Energy analysis," Journal of Power Sources 159(1), 586-594.
328. Schrag, D.P. (2007). "Preparing to capture carbon," Science 315, 812-813.
329. Skinner, F.D., and L.D. Smoot (1979). "Heterogeneous reaction of char and carbon," in: L.D. Smoot, D. T. Pratt (Eds.) Chapter in Pulverized-coal combustion and gasification, New York: Plenum Press, 149-167.
330. Syamlal, M. (1985). Multiphase Hydrodynamics of Gas-Solid Flow, Ph.D. Thesis, Illinois Institute of Technology, Chicago.
331. Wen, C.Y. (1975). "Optimization of coal gasification processes," Research and development report no. 66, Interim report no.1, Contract no. 14-01-0001-497 with Office of coal research U.S. Department of the interior, Washington, D.C.
332. Yegulalp, T.M., K.S. Lackner, and H.J. Ziock (2001). "A review of emerging technologies for sustainable use of coal for power generation," International Journal of surface mining 15(1), 52-68.
333. Yoon, H., J. Wei, and M.M. Denn (1978). "A model for moving-bed coal gasification reactors," A.I.Ch.E Journal 24(5), 885-903.
334. Andrews, A.T.IV, and S. Sundaresan (2005). "Coarse-graining of two-fluid models for fluidized gas-particle suspensions," Presented at the A.I.Ch.E. Annual Meeting, Cincinnati, USA.
335. Benyahia, S., H. Arastoopour, T.M. Knowlton, and H. Massah (2000). "Simulation of particles and gas flow behavior in the riser section of a circulating fluidized bed using the kinetic theory approach for the particulate phase," Powder Technology 112, 24-33.
336. Benyahia, S., H. Arastoopour, and T.M. Knowlton (2002). "Two dimensional transient numerical simulation of solids and gas flow in the riser section of a circulating fluidized bed," Chemical Engineering Communications 189(4), 510-527.
337. Bird, R.B., W.E. Stewart, and E.N. Lightfoot (2002). Transport Phenomena. New York: John Wiley and Sons.
338. Bolland, O., and R. Nicolai (2001). "Describing mass transfer in circulating fluidized beds by ozone decomposition," Chemical Engineering Communications 187, 1-21.
339. Breault, R.W. (2006). "A review of gas-solid dispersion and mass transfer coefficient correlations in circulating fluidized beds," Powder Technology 163, 9-17.
340. Chalermsinsuwan, B., P. Piumsomboon, and D.Gidaspow (2009a). "Kinetic theory based computation of PSRI riser: Part I-Estimate of mass transfer coefficient," Chemical Engineering Science 64(6), 16, 1195-1211.
341. Chalermsinsuwan, B., P. Piumsomboon, and D.Gidaspow (2009b). "Kinetic theory based computation of PSRI riser: Part II-Computation of mass transfer coefficient with chemical reaction," Chemical Engineering Science 64(6), 16, 1212-1222.
342. Fluent Inc. (2005a). Fluent 6.2 UDF Manual. Fluent Inc., Lebanon.
343. Fluent Inc. (2005b). Fluent 6.2 User's Guide. Fluent Inc., Lebanon.
344. Fogler, H.S. (1999). Elements of Chemical Reaction Engineering. New Jersey: Prentice Hall.
345. Fryer, C., and O.E. Potter (1976). "Experimental investigation of models for fluidized bed catalytic reactors," A.I.Ch.E. Journal 22, 38-47.
346. Gidaspow, D., Y.P. Tsuo, and K.M. Luo (1989). "Computed and experimental cluster formation and velocity profiles in circulating fluidized beds," in: Grace, R., Shemilt, L.W., Bergougnou, M.A. (Eds), Fluidization, vol. IV. Engineering Foundation, Alberta, p. 81.
347. Gidaspow, D. (1994). Multiphase Flow and Fluidization: Continuum and Kinetic Theory Description. Boston: Academic Press.
348. Gidaspow, D., J. Jung, and R.K. Singh (2004). "Hydrodynamics of fluidization using kinetic theory: an emerging paradigm: 2002 Flour-Daniel lecture," Powder Technology 148(2-3), 123-141.
349. Gómez, L.C., R.C. da Silva, H.A. Navarro, and F.E. Milioli (2008). "Cluster identification and characterization in the riser of a circulating fluidized bed from numerical simulation results," Applied Mathematical Modelling 32(3), 327-340.
350. Gu, W.K., and J.C. Chen (1998). "A model for solid concentration in circulating fluidized beds," in: Fan, L.S., Knowlton, T.M. (Eds), Fluidization, vol. IX. Colorado: Engineering Foundation, p. 501.
351. Gunn, D.J. (1978). "Transfer of heat or mass to particles in fixed and fluidized beds," International Journal of Heat and Mass Transfer 21, 467-476.
352. Hansen, K.G., T. Solberg, and B.H. Hjertager (2004). "A three-dimensional simulation of gas/particle flow and ozone decomposition in the riser of a circulating fluidized bed," Chemical Engineering Science 59, 5217-5224.
353. Harris, A.T., J.F. Davidson, and R.B. Thorpe (2002). "The prediction of particle cluster properties in the near wall region of a vertical riser (200157)," Powder Technology 127, 128-143.
354. Horio, M., and H. Kuroki (1994). "Three-dimensional flow visualization of dilutely dispersed solids in bubbling and circulating fluidized beds," Chemical Engineering Science 49, 2413-2421.
355. Jiradilok, V., D. Gidaspow, S. Damronglerd, W.J. Koves, R. Mostofi (2006). "Kinetic theory based CFD simulation of turbulent fluidization of FCC particles in a riser," Chemical Engineering Science 61, 5544-5559.
356. Jiradilok, V., D. Gidaspow, R.W. Breault (2007) "Computation of gas and solid dispersion coefficients in turbulent risers and bubbling beds," Chemical Engineering Science 62, 3397-3409.
357. Johnson, P.C. and R. Jackson (1987). "Frictional-collisional constitutive relations for granular materials, with application to plane shearing," Journal of Fluid Mechanics 176, 67-93.
358. Jung, J., D. Gidaspow, and I.K. Gamwo (2005). "Measurement of two kinds of granular temperatures, stresses, and dispersion in bubbling beds," Industrial and Engineering Chemistry Research 44, 1329-1341.
359. Kashyap, M. (2009). Working Progress, Ph.D. Thesis, Illinois Institute of Technology
360. Kato, K., H. Kubota, and C.Y. Wen (1970). "Mass transfer in fixed and fluidized beds.," Chemical Engineering Progress Symposium Series 105(66), 87-99.
361. Kim, J., P. Moin, and R. Moser (1987). "Turbulent statistics in fully developed channel flow at low Reynolds number," Journal of Fluid Mechanics 177, 133-166.
362. Knowlton, T., D. Geldart, J. Masten, and D. King (1995). "Comparison of CFB hydrodynamic models," PSRI Challenge Problem Presented at the Eighth International Fluidization Conference, Tour, France.
363. Kunii, D., and O. Levenspiel (1991). Fluidization Engineering. Boston: Butterworth-Heinemann.
364. Levenspiel, O. (1999). Chemical Reaction Engineering. New York: John Wiley and Sons.
365. Samuelsberg, A., and B.H. Hjertager (1995). "Simulation of two-phase gas/particle flow and ozone decompositions in a 0.25m I.D. riser," in: Serizawa, A., Fukano, T., Batalille, J. (Eds.), Advances in Multiphase Flow. Elsevier Science B.V., Amsterdam, p. 679.
366. Sharma, A., K. Tuzla, J. Matsen, and J. Chen (2000). "Parametric effects of particle size and gas velocity on cluster characteristics in fast fluidized beds," Powder Technology 111, 114-122.
367. Sinclair, J.L., and R. Jackson (1989). "Gas-particle flow in a vertical pipe with particle-particle interaction," A.I.Ch.E. Journal 35, 1473-1486.
368. Soong, C., K. Tuzla, and J. Chen (1995). "Identification of particle clusters in circulating fluidized bed," in: Circulating Fluidized Bed Technology, vol. IV. New York: Engineering Foundation, p. 615.
369. Sun, B., and D. Gidaspow (1999). "Computation of circulating fluidized-bed riser flow for the Fluidization VIII benchmark test," Industrial and Engineering Chemistry Research 38(3), 787-792.
370. Syamlal, M., and T.J. O'Brien (2003). "Fluid dynamic simulation of O3 decomposition in a bubbling fluidized bed," A.I.Ch.E. Journal 49(11), 2793-2801.
371. Tartan, M., and D. Gidaspow (2004). "Measurement of granular temperature and stresses in risers," A.I.Ch.E. Journal 50, 1760-1775.
372. Tsuo, Y.P. and D. Gidaspow (1990). "Computation of flow patterns in circulating fluidized beds," A.I.Ch.E. Journal 36, 885-896.
373. Turton, R., and O. Levenspiel (1989). "An experiment investigation of gas-particle heat transfer coefficients in fluidized beds of fine particles," in: Grace, J.R., Schemildt, L.W., Bergougnou, M.A. (Eds), Fluidization, vol. VI. Alberta: Engineering Foundation, p. 669.
374. Welty, J.R., C.E. Wicks, R.E. Wilson, and G. Rorrer (2001). Fundamentals of Momentum, Heat and Mass Transfer. New York: John Wiley and Sons.
375. Yang, N., W. Wang, W. Ge, and J. Li (2003). "CFD simulation of concurrent-up gas-solid flow in circulating fluidized beds with structure-dependent drag coefficient," Chemical Engineering Journal 96, 71-80.
376. Yang, N., W. Wang, W. Ge, L. Wang, and J. Li, (2004). "Simulation of heterogeneous structure in a circulating fluidized-bed riser by combining the two-fluid model with the EMMS approach," Industrial and Engineering Chemistry Research 43, 5548-5561.
377. Yerushalmi, J., N.T. Cankurt, D. Geldart, and B. Liss (1976). "Flow regimes in vertical gassolid contact systems," A.I.Ch.E. Symposium Series 74(176), 1-13.
378. Zabrodsky, S.S. (1966). Hydrodynamics and Heat Transfer in Fluidized Beds. Cambridge: M.I.T. Press.
379. Chandrasekhar, S. (1961). Hydrodynamic and Hydromagnetic Staility. Oxford.
380. Keller, J. B. and Antman, S. (1969). Bifurcation Theory and Nonlinear Eigenvalue Problems. New York: Benjamin, pp. 359-93.
381. Crandall, S.H. (1956). Engineering Analysis. A Survey of Numerical Procedures. New York: McGraw-Hill.
382. Ince, E.L. (1956). Ordinary Differential Equations. New York: Dover Publications
383. Luss, D. (1968). "Sufficient Conditions for Uniqueness of the Steady State Solutions in Distributed Parameter Systems," Chem. Eng. Sci. 23, 1249-1255.
384. Lyczkowski, R.W., and D. Gidaspow (1971). "Two Dimensional Inert Accumulation in Space H2-O2 Fuel Cells," AIChE Journal 17, 1131-1140.
385. Morse, P. M. and H. Feshbach (1953). Methods of Theoretical Physics. New York: McGraw-Hill.
386. Rainville, E. D. (1964). Intermediate Differential Equations. New York: Macmillan.
387. Zemanian, A.H. (1965). Distribution Theory and Transform Analysis. New York: McGraw-Hill.
388. Bellman, R.E., and R.E. Kalaba, (1965). Quasilinearization and Nonlinear Boundary Value Problems. New York: American Elsevier.
389. Bosarge, W.E., and P.L. Falb (1970). "Infinite Dimensional Multipoint Methods and the Solution of Two Point Boundary Value Problems," Numer. Math 14, 264-286.
390. Carslaw, H.S., and J.C. Jaeger (1959). Conduction of Heat in Solids, 2nd Ed., London: Oxford University Press.
391. Collatz, L. (1966). Functional Analysis and Numerical Mathematics. translated from German by H. Oser, New York: Academic Press.
392. Falb, P.L., and J.L. De Jong (1969). Some Successive Approximation Methods in Control and Oscillation Theory. New York: Academic Press.
393. Finlayson, B.A. (1972). The Method of Weighted Residuals and Variational Principles. With Application in Fluid Mechanics, Heat and Mass Transfer. New York: Academic Press.
394. Gidaspow, D., W. Toczycki, and C.W. Solbring (1973). "Adiabatic Humidification in Boundary Layer Flow with a General Computer Program for Non-linear Boundary value Problems, "in Computer Programs for Chemical Engineering Education IV, "Transport." R. Gordon, Editor, pp. 147-176, Aztec Publishing Co., Box 5574, Austin, Tx. 78763.
395. Kays, W.M. (1966). Convective Heat and Mass Transfer. McGraw-Hill, New York.
396. Krasnosel'skii, M.A. (1964). Topological Methods in the Theory of Nonlinear Integral Equations. translated from Russian by H.A. Armstrong and edited by J. Budak, Oxford; New York: Pergamon Press
397. Lee, S.E. (1968a). "Quasilinearization, Difference Approximation, and Nonlinear Boundary Value Problems," AIChE Jouranl 14(3), 490-496.
398. Lee, S.E., (1968b). "Quasilinearization and Invariant Imbedding. With Applications to Chemical Engineering and Adaptive Control," Mathematics in Science and Engineering, Volume 41, edited by Richard Bellman, New York: Academic Press.
399. Levich, V.G., (1962). Physicochemical Hydrodynamics. translated from Russian by Scripta Technica, Inc., Englewood Cliffs, N.J.: Prentice-Hall.
400. Radhill, J.R., and G.A. McCue (1970). Quasilinearization and Nonlinear Problems in Fluid and Orbital Mechanics. New York: American Elsevier.
401. Vainberg, M. M. (1964). Variational Methods for the Study of Nonlinear Operators. San Francisco: Holden-Day.
402. Williams, F. A. (1965). Combustion Theory. The Fundamental Theory of Chemically Reacting Flow Systems, Reading, MA: Addison-Wesley Pub. Co.
403. Jolley, L. B. W. (1961). Summation of Series. 2nd edition, New York: Dover.
404. Gradshteyn, I.S., and Ryzhik, I. M. (1965). Tables of Integrals, Series and Products. 4th edition, New York: Academic Press.
405. Gidaspow, D., and S. S. Sareen (1970). Purge Dynamics of Fuel Cells. AIChE Journal 16, 560-568.
406. Ozisik, M. N. (1968). Boundary Value Problems of Heat Conduction, International Textbook Company, Scranton, Pennsylvania.
407. Sareen, S. S., and D. Gidaspow (1976). "Flow of Fluids Through Porous, Anisotropic, Composite Media with Source and Sinks: Application to Fuel Cells," Energy Conversion 15, 113-120.
408. Scheidegger, A.E. (1960). The Physics of Flow Through Porous Media. Canada: Univ. Toronto Press.
409. Timoshenko, S., and S. Woinowsky-Krieger (1959). Theory of Plates and Shells. New York: McGraw-Hill.
410. Baker, B.S., D. Gidaspow, and D. T. Wasan, (1971). "Thermal Phenomena in Fuel Cells and Batteries," Advances in Electrochemistry and Electrochemical Engineering 8, 63-156, New York: Wiley-Interscience.
411. Carslaw, H.S., and Jaeger J.C. (1959). Conduction of Heat in Solids, 2nd Ed., Oxford: Clarendon Press.
412. Chase, C.A., D. Gidaspow, and R.E. Peck (1970). "Transient Heat and Mass Transfer in an Adiabatic Regenerator-A Green's Matrix Representation," Int. J. Heat and Mass Transfer 13, 817-833.
413. Dipak, R., and D. Gidaspow (1972). "A Cross-Flow Regenerator-A Green's Matrix Representation," Chem. Eng. Sci. 27, 779-793.
414. Dipak, R., and D. Gidaspow (1974). "Nonlinear Coupled Heat and Mass Exchange in a Cross-Flow Regenerator," Chem. Eng. Sci. 29, 2101-2114.
415. Gidaspow, D. (1967). Discussion of "Transient Heating or Cooling of One Dimensinal Solids by Thermal Radiation," by A.L. Crosbie and R. Viskanta, in Proc. Thrid International Heat Thansfer Conference, Vol VI, pp 355-356, AIChE.
416. Gidaspow, D. (1971). "Green's Functions for the Graetz Problem and Calculation of Interfacial Concentrations," AIChE Journal 17(1), 19-24.
417. Gidaspow, D., and Baker B.S. (1973). "A Model for Discharge of Storage Batteries," J. Electrochem. Soc. 120, 1005-1010.
418. Kim J., Moin P., and Moser R. (1987). "Turbulence statistics in fully developed channel flow at low Reynolds number," J. Fluid Mech. 177, 133-166.
419. Kim S., Fuentes Y.O., and Karrila S. J. (1991) "Fluids with Microstructure: Some New Perspectives for Modeling and Simulation with Parallel Computers," edited by Jong Hyun Kim, Jae Min Hyun, Chung-Oh Lee, Fluid Engineering: Korea-U.S. progress, Hemisphere publishing corporation, p.163-176.
420. Lavan, Z. and D. Gidaspow (1980). "Development of a Solar Desiccant Dehumidifier," Proceedings of the Annual DOE Active Solar Heating and Cooling Contractors' Review Meeting, March 26-28, 1980, U.S. Department of Energy, Office for Solar Applications for Buildings, Conf. 80040, pp. 3-9 to 3-10. Also paper in "Solar Energy, International Progress", Vol. 2, pp. 898-931, Editor: N. Veziroglu, Pergamon Press.
421. Lyczkowski, R.W., and D. Gidaspow (1971). "Two Dimensional Inert Accumulation in Space H2 -O2 Fuel Cells," AIChE Journal 17, 1131-1140.
422. Mei, V., H. Ghezelayagh, D. Gidaspow, and Z. Lavan (1979). "Development of a Solar Desiccant Dehumidifier-Part II," Proceedings of the 14th Intersociety Energy Conversion Engineering Conference 1, 264-268.
423. Mills, R.D. (1977). "Computing Internal Viscous Flow Problems for the Circle by Integral Methods," J. Fluid. Mech. 79(3), 609-624.
424. Panikker, P.K.G. and Z. Lavan (1975). "Flow Past Impulsively Started Bodies Using Green's Functions," J. Fluid. Mech. 18(1), 46-65.