Optimizing decolorization of Methylene Blue and Methyl Orange dye by pulsed discharged plasma in water using response surface methodology

Journal of the Taiwan Institute of Chemical Engineers

Volumn 45, Issue 2, 2014, Pages 589-595

  Jin, Yanping ^a   Wu, Yunhai ^a   Cao, Julin ^a   Wu, Yunying ^b  

^a HOHAI UNIVERSITY   (China)

^b HANSHAN NORMAL UNIVERSITY   (China)

Author keywords

Methyl Orange; Methylene Blue; Optimization; Pulsed discharged plasma; Response surface methodology

Indexed keywords

EID: 84894680914     PISSN: 18761070     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jtice.2013.06.012     Document Type: Article

References (45)

1. Kousha M., Daneshvar E., Sohrabi M.S., Jokar M., Bhatnagar A. Adsorption of acid orange II dye by raw and chemically modified brown macroalga Stoechospermum marginatum. Chem Eng J 2012, 192:67-76.
2. Li W.H., Yue Q.Y., Tu P., Ma Z.H., Gao B.Y., Li J.Z., et al. Adsorption characteristics of dyes in columns of activated carbon prepared from paper mill sewage sludge. Chem Eng J 2011, 178:197-203.
3. Dizge N., Aydiner C., Demirbas E., Kobya M., Kara S. Adsorption of reactive dyes from aqueous solutions by fly ash: kinetic and equilibrium studies. J Hazard Mater 2008, 150:737-746.
4. Zhang W.X., Li H.J., Kan X.W., Dong L., Yan H., Jiang Z.W., et al. Adsorption of anionic dyes from aqueous solutions using chemically modified straw. Bioresource Technol 2012, 117:40-47.
5. Kim T., Park C., Yang J., Kim S. Comparison of disperse and reactive dye removals by chemical coagulation and Fenton oxidation. J Hazard Mater 2004, 112:95-103.
6. Kayan B., Gözmen B., Demirel M., Gizir A.M. Degradation of acid red 97 dye in aqueous medium using wet oxidation and electro-Fenton techniques. J Hazard Mater 2010, 177:95-102.
7. Gómez V., Larrechi M.S., Callao M.P. Kinetic and adsorption study of acid dye removal using activated carbon. Chemosphere 2007, 69:1151-1158.
8. Mahmoodi N.M., Salehi R., Arami M. Binary system dye removal from colored textile wastewater using activated carbon: kinetic and isotherm studies. Desalination 2011, 272:187-195.
9. Chafi M., Gourich B., Essadki A.H., Vial C., Fabregat A. Comparison of electrocoagulation using iron and aluminium electrodes with chemical coagulation for the removal of a highly soluble acid dye. Desalination 2011, 281:285-292.
10. Zhou X.J., Guo W.Q., Yang S.S., Ren N.Q. A rapid and low energy consumption method to decolorize the high concentration triphenylmethane dye wastewater: operational parameters optimization for the ultrasonic-assisted ozone oxidation process. Bioresource Technol 2012, 105:40-47.
11. 2: influence of operational parameters and kinetic modeling. Dyes Pigments 2006, 70:54-59.
12. Berberidou C., Poulios L., Ps Xekoukoulotaki N., Mantzavinos D. Sonolytic, photocatalytic and sonophotocatalytic degradation of malachite green in aqueous solutions. Appl Catal B-Environ 2007, 74:63-72.
13. Körbahti B.K., Tanyolaç A. Electrochemical treatment of simulated textile wastewater with industrial components and Levafix Blue CA reactive dye: optimization through response surface methodology. J Hazard Mater 2008, 151:422-431.
14. 2 using response surface methodology. J Hazard Mater 2009, 172:1388-1393.
15. Guinea E., Brillas E., Centellas F., Cañizares P., Rodrigo M.A., Sáez C. Oxidation of enrofloxacin with conductive-diamond electrochemical oxidation, ozonation and Fenton oxidation. A comparison. Water Res 2009, 43:2131-2138.
16. Santanab M.H.P., Silva L.M.D., Fretitas A.C., Boodts J.F.C., Fernandes K.C., Faria L.A.D. Application of electrochemically generated ozone to the discoloration and degradation of solutions containing the dye reactive orange 122. J Hazard Mater 2009, 164:10-17.
17. Ai Z., Li J., Zhang L., Lee S. Rapid decolorization of azo dyes in aqueous solution by an ultrasound-assisted electrocatalytic oxidation process. Ultrason Sonochem 2010, 17:370-375.
18. Du C.M., Shi T.H., Sun Y.W., Zhuang X.F. Decolorization of Acid Orange 7 solution by gas-liquid arc discharge plasma. J Hazard Mater 2008, 154:1192-1197.
19. Magureanu M., Piroi D., Mandache N.B., David V., Medvedovici A., Parvulescu V.I. Degradation of pharmaceutical compound pentoxifylline in water by non-thermal plasma treatment. Water Res 2010, 44:3445-3453.
20. Dojčinović B.P., Roglić G.M., Obradović B.M., Kuraica M.M., Kostić M.M., Nešić J., et al. Decolorization of reactive textile dyes using water falling film dielectric barrier discharge. J Hazard Mater 2011, 192:763-771.
21. Sugiarto A.T., Ito S., Ohshima T., Sato M., Skalny J.D. Oxidative decoloration of dyes by pulsed discharge plasma in water. J Electrostat 2003, 58:135-145.
22. Körbahti B.K. Response surface optimization of electrochemical treatment of textile dye wastewater. J Hazard Mater 2007, 145:277-286.
23. Ölmez T. The optimization of Cr(VI) reduction and removal by electrocoagulation using response surface methology. J Hazard Mater 2009, 162:1371-1378.
24. Asgher M., Bhatti H.N. Response surface methodology and central composite design of biosorption of reactive anthraquinone dyes by Citrus sinensis waste biomass. Asian J Chem 2010, 22:7817-7826.
25. Asgher M., Bhatti H.N. Optimization of adsorption variables for removal of anionic dyes by Citrus sinensis biomass using response surface methodology. Fresenius Environ Bull 2011, 20:2078-2084.
26. Bian W.J., Song X.H., Liu D.Q., Zhang J., Chen X.H. Actions of nitrogen plasma in the 4-chrolophenol degradation by pulsed high-voltage discharge with bubbling gas. Chem Eng J 2013, 219:385-394.
27. Sadri M.S., Alavi M.M.R., Arami M. Coagulation/flocculation process for dye removal using sludge from water treatment plant: optimization through response surface methodology. J Hazard Mater 2010, 175:651-657.
28. Su S.N., Nie H.L., Zhu L.M., Chen T.X. Optimization of adsorption conditions of papain on dye affinity membrane using response surface methodology. Bioresource Technol 2009, 100:2336-2340.
29. Jain M., Garg V.K., Kadirvelu K. Investigation of Cr(VI) adsorption onto chemically treated Helianthus annuus: optimization using response surface methodology. Bioresource Technol 2011, 102:600-605.
30. Soloman P.A., Ahmed B.C., Velan M., Balasubramanian N., Marimuthu P. Augmentation of biodegradability of pulp and paper industry wastewater by electrochemical pre-treatment and optimization by RSM. Sep Purif Technol 2009, 69:109-117.
31. Shafeeyan M.S., Wan D.W.M.A., Houshmand A., Arami-Niya A. The application of response surface methodology to optimize the amination of activated carbon for the preparation of carbon dioxide adsorbents. Fuel 2012, 94:465-472.
32. Bezerra M.A., Santelli R.E., Oliveira E.P., Villar L.S., Escaleira L.A. Response surface methodology (RSM) as a tool for optimization in analytical chemistry. Talanta 2008, 76:965-977.
33. Balasubramanian N., Kojima T., Srinivasakannan C. Arsenic removal through electrocoagulation: kinetic and statistical modeling. Chem Eng J 2009, 155:76-82.
34. Amini M., Younesi H., Bahramifar N. Biosorption of nickel(II) from aqueous solution by Aspergillus niger: response surface methodology and isotherm study. Chemosphere 2009, 75:1483-1491.
35. Vargas A.M.M., Martins A.C., Almeida V.C. Ternary adsorption of acid dyes onto activated carbon from flamboyant pods (Delonix regia): analysis by derivative spectrophotometry and response surface methodology. Chem Eng J 2012, 195:173-179.
36. Tripathi P., Srivastava V.C., Kumar A. Optimization of an azo dye batch adsorption parameters using Box-Behnken design. Desalination 2009, 249:1273-1279.
37. Silva J.P., Sousa S., Goncalves I., Porter J., Ferreira-Dias Modelling adsorption of acid orange 7 dye in aqueous solutions to spent brewery grains. Sep Purif Technol 2004, 40:163-170.
38. Chatterjee S., Kumar A., Basu S., Dutta S. Application of response surface methodology for Methylene Blue dye removal from aqueous solution using low cost adsorbent. Chem Eng J 2012, 181-182:289-299.
39. Meng R.J., Yu X.J. Investigation of ultrasound assisted regeneration of Ni-bentonite with response surface methodology (RSM). Appl Clay Sci 2011, 54:112-117.
40. Wen Y.J., Wu Y.H. Optimizing adsorption of Co(II) and Ni(II) by 13x molecular sieves using response surface methodology. Water Air Soil Poll 2012, 223:6095-6107.
41. Singh R., Chadetrik R., Kumar R., Bishnoi K., Bhatia D., Kumar A., et al. Biosorption optimization of lead(II), cadmium(II) and copper(II) using response surface methodology and applicability in isotherms and thermodynamics modeling. J Hazard Mater 2010, 174:623-634.
42. Sarkar M., Majumdar P. Application of response surface methodology for optimization of heavy metal biosorption using surfactant modified chitosan bead. Chem Eng J 2011, 175:376-387.
43. Lei L.C., Zhang Y., Zhang X.W., Shen Y.J. Using a novel pulsed high-voltage gas-liquid hybrid discharge continuous reactor for removal of organic pollutant in oxygen atmosphere. J Electrostat 2008, 66:16-24.
44. Li J., Sato M., Ohshima T. Degradation of phenol in water using a gas-liquid phase pulsed discharge plasma reactor. Thin Solid Films 2007, 515:4283-4288.
45. Yang B., Zhou M.H., Lei L.C. Synergistic effects of liquid and gas phase discharges using pulsed high voltage for dyes degradation in the presence of oxygen. Chemosphere 2005, 60:405-411.