Optimizing adsorption of Co(II) and Ni(II) by 13× molecular sieves using response surface methodology

Water, Air, and Soil Pollution

Volumn 223, Issue 9, 2012, Pages 6095-6107

  Wen, Yajun ^a   Wu, Yunhai ^a  

^a HOHAI UNIVERSITY   (China)

Author keywords

13 Molecular sieve; Adsorption; Co(II); Ni(II); Response surface methodology

Indexed keywords

ADSORPTION CHARACTERISTIC; ADSORPTION-DESORPTION CYCLES; BATCH EXPERIMENTS; CENTRAL COMPOSITE DESIGNS; COMBINED EFFECT; HYDROTHERMALLY; INITIAL CONCENTRATION; OPTIMUM CONDITIONS; PROCESS CONDITION; QUADRATIC MODELS; RESPONSE SURFACE METHODOLOGY; SCANNING ELECTRON MICROSCOPE;

BYPRODUCTS; DESORPTION; METAL IONS; MOLECULAR SIEVES; OPTIMIZATION; POTASSIUM; REUSABILITY; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTIES; X RAY DIFFRACTION; X RAY DIFFRACTION ANALYSIS;

ADSORPTION;

COBALT; NICKEL; POTASSIUM CARBONATE;

ADSORPTION; COBALT; NICKEL; OPTIMIZATION; SCANNING ELECTRON MICROSCOPY; X-RAY DIFFRACTION;

ADSORPTION KINETICS; ARTICLE; BATCH PROCESS; CONCENTRATION RESPONSE; CONTROLLED STUDY; DESORPTION; EXPERIMENTAL STUDY; FEASIBILITY STUDY; HEAVY METAL REMOVAL; INTERMETHOD COMPARISON; PH; PROCESS OPTIMIZATION; RECYCLING; RESPONSE SURFACE METHOD; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TEMPERATURE SENSITIVITY; X RAY DIFFRACTION;

EID: 84870236048     PISSN: 00496979     EISSN: 15732932     Source Type: Journal    
DOI: 10.1007/s11270-012-1343-x     Document Type: Article

References (43)

1. Akbal, F., & Camcι, S. (2011). Copper, chromium and nickel removal from metal plating wastewater by electrocoagulation. Desalination, 269, 214-222.
2. Aleboyeh, A., Daneshvar, N., & Kasiri, M. B. (2008). Optimization of C.I. Acid Red 14 azo dye removal by electrocoagulation batch process with response surface methodology. Chemical Engineering and Processing, 47, 827-832.
3. Amini, M., Younesi, H., & Bahramifar, N. (2009). Biosorption of nickel(II) from aqueous solution by Aspergillus niger: response surface methodology and isotherm study. Chemosphere, 75, 1483-1491.
4. Arulkumar, M., Sathishkumar, P., & Palvannan, T. (2011). Optimization of orange G dye adsorption by activated carbon of Thespesia populnea pods using response surface methodology. Journal of Hazardous Materials, 186, 827-834.
5. Auta, M., & Hameed, B. H. (2011). Optimized waste tea activated carbon for adsorption of Methylene Blue and Acid Blue 29 dyes using response surface methodology. Chemical Engineering Journal, 175, 233-243.
6. 2+ in water: an experimental study. Earth Science Frontiers, 12, 165-170.
7. Balasubramanian, N., Kojima, T., & Srinivasakannan, C. (2009). Arsenic removal through electrocoagulation: kinetic and statistical modeling. Chemical Engineering Journal, 155, 76-82.
8. Chatterjee, S., Kumar, A., Basu, S., & Dutta, S. (2012). Application of response surface methodology for methylene blue dye removal from aqueous solution using low cost adsorbent. Chemical Engineering Journal, 181-182, 289-299.
9. Dambies, L., Jaworska, A., Zakrzewska-Trznadel, G., & Sartowska, B. (2010). Comparison of acidic polymers for the removal of cobalt from water solutions by polymer assisted ultrafiltration. Journal of Hazardous Materials, 178, 988-993.
10. El-Latif, M. M. A., & Elkady, M. F. (2011). Kinetics study and thermodynamic behavior for removing cesium, cobalt and nickel ions from aqueous solution using nano-zirconium vanadate ion exchanger. Desalination, 271, 41-54.
11. Garg, U. K., Kaur, M. P., Garg, V. K., & Sud, D. (2008). Removal of Nickel(II) from aqueous solution by adsorption on agricultural waste biomass using a response surface methodological approach. Bioresource Technology, 99, 1325-1331.
12. Garg, U. K., Kaur, M. P., Sud, D., & Garg, V. K. (2009). Removal of hexavalent chromium from aqueous solution by adsorption on treated sugarcane bagasse using response surface methodological approach. Desalination, 249, 475-479.
13. Ghorbani, F., Younesi, H., Ghasempouri, S. M., Zinatizadeh, A. A., Amini, M., & Daneshi, A. (2008). Application of response surface methodology for optimization of cadmium biosorption in an aqueous solution by Saccharomyces cerevisiae. Chemical Engineering Journal, 145, 267-275.
14. Guan, M., Liu, W., Shao, Y. L., Huang, H. Y., & Zhang, H. X. (2009). Preparation, characterization and adsorption properties studies of 3-(methacryloyloxy)propyltrimethoxysilane modified and polymerized sol-gel mesoporous SBA- 15 silica molecular sieves. Microporous and Mesoporous Materials, 123, 193-201.
15. Ipek, U. (2005). Removal of Ni(II) and Zn(II) from an aqueous solution by reverse osmosis. Desalination, 174, 161-169.
16. 2+ removal by the cyanobacterium Synechocystis pevalekii using the response surface methodology. Process Biochemistry, 44, 118-121.
17. Kobya, M., Demirbas, E., Bayramoglu, M., & Sensoy, M. T. (2011). Optimization of electrocoagulation process for the treatment of metal cutting wastewaters with response surface methodology. Water, Air, and Soil Pollution, 215, 399-410.
18. Krishnan, K. A., & Anirudhan, T. S. (2008). Kinetic and equilibrium modelling of cobalt(II) adsorption onto bagasse pith based sulphurised activated carbon. Chemical Engineering Journal, 137, 257-264.
19. Kumar, R., Singh, R., Kumar, N., Bishnoi, K., & Bishnoi, N. R. (2009). Response surface methodology approach for optimization of biosorption process for removal of Cr(VI), Ni (II) and Zn(II) ions by immobilized bacterial biomass sp. Bacillus brevis. Chemical Engineering Journal, 146, 401-407.
20. Li, X. L., Li, Y. F., & Ye, Z. F. (2011). Preparation of macroporous bead adsorbents based on poly(vinyl alcohol)/chitosan and their adsorption properties for heavy metals from aqueous solution. Chemical Engineering Journal, 178, 60-68.
21. Olgun, A., & Atar, N. (2011). Removal of copper and cobalt from aqueous solution onto waste containing boron impurity. Chemical Engineering Journal, 167, 140-147.
22. Ölmez, T. (2009). The optimization of Cr(VI) reduction and removal by electrocoagulation using response surface methology. Journal of Hazardous Materials, 162, 1371-1378.
23. Onal, Y., Akmil-Basar, C., Eren, D., Sarici-Ozdemir, C., & Depci, T. (2006). Adsorption kinetics of malachite green onto activated carbon prepared from Tuncbilek lignite. Journal of Hazardous Materials, 128, 150-157.
24. Özdemir, E., Duranoglu, D., Beker, Ü., & Avcι, A. Ö. (2011). Process optimization for Cr(VI) adsorption onto activated carbons by experimental design. Chemical Engineering Journal, 172, 207-218.
25. Özer, A., Gurbuz, G., Calimli, A., & Korbahti, B. K. (2008). Investigation of nickel(II) biosorption on Enteromorpha prolifera: optimization using response surface analysis. Journal of Hazardous Materials, 152, 778-788.
26. Rao, G. P. C., Satyaveni, S., Ramesha, A., Seshaiah, K., Murthy, K. S. N., & Choudary, N. V. (2006). Sorption of cadmium and zinc from aqueous solutions by zeolite 4A, zeolite 13× and bentonite. Journal of Environmental Management, 81, 265-272.
27. Ravikumar, K., Krishnan, S., Ramalingam, S., & Balu, K. (2007). Optimization of process variables by the application of response surface methodology for dye removal using a novel adsorbent. Dyes and Pigments, 72, 66-74.
28. Repo, E., Warchol, J. K., Kurniawan, T. G., & Sillanpaa, M. E. T. (2010). Adsorption of Co(II) and Ni(II) by EDTA-and/or DTPA-modified chitosan: kinetic and equilibrium modeling. Chemical Engineering Journal, 161, 73-82.
29. Sadri Moghaddam, S., Alavi Moghaddam, M. R., & Arami, M. (2010). Coagulation/flocculation process for dye removal using sludge from water treatment plant: optimization through response surface methodology. Journal of Hazardous Materials, 175, 651-657.
30. Sahu, J. N., Acharya, J., & Meikap, B. C. (2009). Response surface modeling and optimization of chromium(VI) removal from aqueous solution using tamarind wood activated carbon in batch process. Journal of Hazardous Materials, 172, 818-825.
31. Sarkar, M., & Majumdar, P. (2011). Application of response surface methodology for optimization of heavy metal biosorption using surfactant modified chitosan bead. Chemical Engineering Journal, 175, 376-387.
32. Schulte-Bockholt, M., & Schuster, M. (2008). Removal enrichment and recovery of Ni(II), Zn(II) and phosphate from phosphation rinsing waters with liquid-phase polymerbased retention technique. Separation and Purification Technology, 63, 172-178.
33. Shafaei, A., Pajootan, E., Nikazar, M., & Arami, M. (2011). Removal of Co(II) from aqueous solution by electrocoagulation process using aluminum electrodes. Desalination, 279, 121-126.
34. Shafeeyan, M. S., Wan Daud, W. M. A., Houshmand, A., & Arami-Niya, A. (2012). The application of response surface methodology to optimize the amination of activated carbon for the preparation of carbon dioxide adsorbents. Fuel, 94, 465-472.
35. Singh, R., Chadetrik, R., Kumar, R., Bishnoi, K., Bhatia, D., Kumar, A., et al. (2010). Biosorption optimization of lead (II), cadmium(II) and copper(II) using response surfacemethodology and applicability in isotherms and thermodynamics modeling. Journal of Hazardous Materials, 174, 623-634.
36. Soloman, P. A., Ahmed Basha, C., Velan, M., Balasubramanian, N., & Marimuthu, P. (2009). Augmentation of biodegradability of pulp and paper industry wastewater by electrochemical pretreatment and optimization by RSM. Separation and Purification Technology, 69, 109-117.
37. Song, M. M., Branford-White, C., Nie, H. L., & Zhu, L. M. (2011). Optimization of adsorption conditions of BSA on thermosensitive magnetic composite particles using response surface methodology. Colloids and Surfaces. B, Biointerfaces, 84, 477-483.
38. Su, S. N., Nie, H. L., Zhu, L. M., & Chen, T. X. (2009). Optimization of adsorption conditions of papain on dye affinity membrane using response surface methodology. Bioresource Technology, 100, 2336-2340.
39. Subbaiah, M. V., Vijaya, Y., Kumar, N. S., Reddy, A. S., & Krishnaiah, A. (2009). Biosorption of nickel from aqueous solutions by Acacia leucocephala bark: kinetics and equilibrium studies. Colloids and Surfaces. B, Biointerfaces, 74, 260-265.
40. Tan, I. A. W., Ahmad, A. L., & Hameed, B. H. (2008). Optimization of preparation conditions for activated carbons from coconut husk using response surface methodology. Chemical Engineering Journal, 137, 462-470.
41. Vargas, A. M. M., Martins, A. C., & Almeida, V. C. (2012). Ternary adsorption of acid dyes onto activated carbon from flamboyant pods (Delonix regia): analysis by derivative spectrophotometry and response surface methodology. Chemical Engineering Journal, 195, 173-179.
42. Yang, S. T., Li, J. X., Shao, D. D., Hu, J., & Wang, X. K. (2009). Adsorption of Ni(II) on oxidized multi-walled carbon nanotubes: effect of contact time, pH, foreign ions and PAA. Journal of Hazardous Materials, 166, 109-116.
43. Zheng, H., Han, L. J., Ma, H. W., Zheng, Y., Zhang, H. M., Liu, D. H., et al. (2008). Adsorption characteristics of ammonium ion by zeolite 13×. Journal of Hazardous Materials, 158, 577-584.