Impacts of trace carbon on the microstructure of as-sintered biomedical Ti-15Mo alloy and reassessment of the maximum carbon limit

Acta Biomaterialia

Volumn 10, Issue 2, 2014, Pages 1014-1023

  Yan, M ^a   Qian, M ^a   Kong, C ^b   Dargusch, M S ^a  

^a UNIVERSITY OF QUEENSLAND   (Australia)

^b UNIVERSITY OF NEW SOUTH WALES   (Australia)

Author keywords

3 D tomography; Biomedical titanium alloys; Carbon limit; Titanium carbides

Indexed keywords

ALUMINUM ALLOYS; BINARY ALLOYS; CORROSION RESISTANCE; CORROSION RESISTANT ALLOYS; ELASTIC MODULI; HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; IMAGE RECONSTRUCTION; MOLYBDENUM ALLOYS; SINTERING; TERNARY ALLOYS; TITANIUM ALLOYS; TOMOGRAPHY;

3-D TOMOGRAPHY; BIOMEDICAL TITANIUM ALLOY; CARBIDE FORMATION; CARBON CONTENT; CARBON LIMIT; CARBON-ENRICHED; FATIGUE CORROSION; FATIGUE PROPERTIES; GRAIN-BOUNDARIES; MICROSCOPIC STUDY;

GRAIN BOUNDARIES;

ALLOY; CARBON; TITANIUM; TITANIUM CARBIDE;

ARTICLE; CORROSION; HARDNESS; MORPHOLOGY; PRIORITY JOURNAL; TRANSMISSION ELECTRON MICROSCOPY; YOUNG MODULUS;

3-D TOMOGRAPHY; BIOMEDICAL TITANIUM ALLOYS; CARBON LIMIT; TITANIUM CARBIDES;

ALLOYS; CARBON; IMAGING, THREE-DIMENSIONAL; MECHANICAL PHENOMENA; MICROSCOPY, ELECTRON, SCANNING; PHASE TRANSITION;

EID: 84894528626     PISSN: 17427061     EISSN: 18787568     Source Type: Journal    
DOI: 10.1016/j.actbio.2013.10.034     Document Type: Article

References (53)

1. P.J. Bania Beta titanium alloys and their role in the titanium industry D. Eylon, R. Boyer, D. Koss, Beta titanium alloys in the 1990s 1993 TMS Warrendale, PA 3 14
2. Available from: < http://www.atimetals.com/Documents/ATI-Ti-15Mo-TDS- EN.pdf >.
3. M. Donachie Jr Titanium: a technical guide 1988 ASM International Materials Park, OH p. 3
4. K. Wang The use of titanium for medical applications in the USA Mater Sci Eng, A 213 1996 I34 I37
5. Zardiackas LD, Mitchell DW, Disegi JA. Characterization of Ti-15Mo beta titanium alloy for orthopaedic implant applications. ASTM Symposium on Medical Applications of Titanium and Its Alloys, The Material and Biological Issues; 1994. p. 15-6.
6. A.P.R. Alves, F.A. Santana, L.A.A. Rosa, S.A. Cursino, and E.N. Codaro A study on corrosion resistance of the Ti-10Mo experimental alloy after different processing methods Mater Sci Eng C 24 2004 693 696
7. W.F. Ho, C.P. Ju, and J.H.C. Lin Structure and properties of cast binary Ti-Mo alloys Biomater 20 1999 2115 2122
8. W.F. Ho A comparison of tensile properties and corrosion behavior of cast Ti-7.5Mo with c.p. Ti, Ti-15Mo and Ti-6Al-4V alloys J Alloys Compd 464 2008 580 583
9. N.T.C. Oliveira, G. Aleixo, R. Caramb, and A.C. Guastaldi Development of Ti-Mo alloys for biomedical applications: microstructure and electrochemical characterization Mater Sci Eng, A 452-453 2007 727 731
10. N.T.C. Oliveira, and A.C. Guastaldi Electrochemical stability and corrosion resistance of Ti-Mo alloys for biomedical applications Acta Biomater. 5 2009 399 405
11. M.V. Capela, H.A. Acciari, J.M.V. Capela, T.M. Carvalho, and M.C.S. Melin Repeatability of corrosion parameters for titanium-molybdenum alloys in 0.9% NaCl solution J Alloys Compd 465 2008 479 483
12. S. Kumar, and S.T.S.N. Narayanan Evaluation of corrosion behaviour of Ti-25Mo alloy in chloride medium J Appl Electrochem 41 2011 123 127
13. F.X. Xie, X.B. He, S.L. Cao, X. Lu, and X.H. Qu Structural characterization and electrochemical behavior of a laser sintered porous Ti-10Mo alloy Corrosion Sci 67 2013 217 224
14. E. Delvat, D.M. Gordin, T. Gloriant, J.L. Duval, and M.D. Nagel Microstructure, mechanical properties and cytocompatibility of stable beta Ti-Mo-Ta sintered alloys J Mech Behav Biomed Mater 1 2008 345 351
15. X.F. Zhao, M. Niinomi, M. Nakai, and J. Hieda Beta type Ti-Mo alloys with changeable Young's modulus for spinal fixation applications Acta Biomater 8 2012 1990 1997
16. Jablokov VR, Nutt MJ, Richelsoph ME, Freese HL. The application of Ti-15Mo beta titanium alloy in high strength structural orthopaedic applications. J ASTM Inter; 2005. 2: JAI13033.
17. ASTM Standard F2066-08. Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150). ASTM Standards, v. 13.01, Medical Devices and Services, ASTM International, West Conshohocken, PA; 2011.
18. 2 and Mo powders J Alloys Compd 485 2009 215 218
19. Z.F. Gao, Q.Y. Li, F. He, Y. Huang, and Y.Z. Wan Mechanical modulation and bioactive surface modification of porous Ti-10Mo alloy for bone implants Mater Des 42 2012 13 20
20. N. Adya, M. Alam, T. Ravindranath, A. Mubeen, and B. Saluja Corrosion in titanium dental implants: literature review J Indian Prosthodontic Soc 5 2005 126 131
21. M. Yan, S.D. Luo, G.B. Schaffer, and M. Qian Impurity (Fe, Cl and P)-induced grain boundary and secondary phases in commercially pure titanium (CP-Ti) Metall Mater Trans A 44A 2013 3961 3969
22. Y.F. Yang, S.D. Luo, G.B. Schaffer, and M. Qian The sintering, sintered microstructure and mechanical properties of Ti-Fe-Si alloys Metall Mater Trans A 43A 2012 4896 4906
23. Ivasishin OM, Savvakin DG, Moxson VS, Duz VA, Gumenyak MM. Manufacture of near-net shaper titanium alloys articles from metal powders by sintering with presence of atomic hydrogen. United States Patent No. US 2012/0058002 A1, 8 March; 2012.
24. S.D. Luo, Y.F. Yang, G.B. Schaffer, and M. Qian Novel fabrication of titanium by pure microwave radiation of titanium hydride powder Scripta Mater 69 2013 69 72
25. D.P. Zhao, K.K. Chang, T. Ebel, M. Yan, M. Qian, and R. Willumeit et al. Microstructure and mechanical properties of metal injection moulded Ti-Nb binary alloys as biomaterial J Mech Behav Biomed Mater 28 2013 171 182
26. Y.F. Yang, S.D. Luo, G.B. Schaffer, and M. Qian Sintering of Ti-10V-2Fe-3Al and mechanical properties Mater Sci Eng, A 528 2011 6719 6726
27. M. Yan, Y. Liu, Y.B. Liu, C. Kong, G.B. Schaffer, and M. Qian Simultaneous gettering of oxygen and chlorine and homogenization of the β phase by rare earth hydride additions to a powder metallurgy Ti-2.25Mo-1.5Fe alloy Scripta Mater 67 2012 491 494
28. W.C. Oliver, and G.M. Pharr An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments J Mater Res 7 1992 1564 1583
29. 2-y (x = 0.05, 0.1, 0.2) with different sintering temperatures. J Europ Ceram Soc 2010; 30: 669-75.
30. H. Ikehata, N. Nagasako, T. Furuta, A. Fukumoto, K. Miwa, and T. Saito First principles calculations for development of low elastic modulus Ti alloys Phys Rev B 70 2004 174113
31. C. Leyens, and M. Peters Titanium and titanium alloys: fundamentals and applications 2003 Wiley-VCH Weinheim
32. G. Lutjering, and J.C. Williams Titanium 2nd ed. 2007 Springer Berlin
33. M.J. Donachie Jr Titanium: a technical guide 2nd ed. 2000 ASM International Materials Park, OH
34. E. Torok, A.J. Perry, L. Chollet, and W.D. Sproul Young modulus of Tin, TiC, ZrN and HfN Thin Solid Films 153 1987 37 43
35. H. Goretzki Neutron diffraction studies on titanium-carbon and zirconium-carbon alloys Phys Status Solidi 20 1967 K141 K143
36. 2C at the interface in TiC particulate reinforced Ti alloy composites Acta Mater 48 2000 1443 1450
37. 1-x Acta Mater 30 1982 1769 1779
38. Z.Q. Chen, Y.G. Li, D. Hu, M.H. Loretto, and X. Wu Role of alloying elements in microstructures of beta titanium alloys with carbon additions Mater Sci Tech 19 2003 1391 1398
39. W. Sekimoto, H. Tsuda, and S. Mori Effects of chromium and nitrogen contents on microstructural changes in TiC particles in (α + β)- and β-titanium matrix composites Mater Trans 53 2012 1405 1411
40. V.A.R. Henriques, E.T. Galvani, S.L.G. Petroni, M.S.M. Paula, and T.G. Lemos Production of Ti-13Nb-13Zr alloy for surgical implants by powder metallurgy J Mater Sci 45 2010 5844 5850
41. B.Y. Chen, K.S. Hwang, and K.L. Ng Effect of cooling process on the alpha phase formation and mechanical properties of sintered Ti-Fe alloys Mater Sci Eng, A 528 2011 4556 4563
42. N.K. Park, C.H. Lee, J.H. Kim, and J.K. Hong Characteristics of powder-rolled and sintering sheets made from HDH Ti powders Key Eng Mater 520 2010 281 288
43. 2 powder Powder Metall 49 2006 236 239
44. H. Miura, H. Kang, and Y. Itoh High performance titanium alloy compacts by advanced powder processing techniques Key Eng Mater 520 2010 30 40
45. S. Virdhian, T. Osada, H.G. Kang, F. Tsumori, and H. Muria Evaluation and analysis of distortion of complex shaped Ti-6Al-4V compacts by metal injection molding process Key Eng Mater 520 2010 187 194
46. L.M. Zou, C. Yang, Y. Long, Z.Y. Xiao, and Y.Y. Li Fabrication of biomedical Ti-35Nb-7Zr-5Ta alloys by mechanical alloying and spark plasma sintering Powder Metall 55 2012 65 70
47. Y.H. Wang, J.P. Lin, Y.H. He, Y.L. Wang, and G.L. Chen Fabrication and SPS microstructure of Ti-45Al-8.5Nb-(W, B, Y) alloy powders Intermetallics 16 2008 215 224
48. F.M. Zhang, E. Otterstein, and E. Burkel Spark plasma sintering, microstructures, and mechanical properties of macroporous titanium foams Adv Eng Mater 12 2010 863 872
49. S.D. Luo, M. Yan, G.B. Schaffer, and M. Qian Sintering of titanium in vacuum by microwave radiation Metall Mater Trans A 42 2011 2466 2474
50. J.R.S. Martins, and C.R. Grandini Structural characterization of Ti-15Mo alloy used as biomaterial by Rietveld method J Appl Phys 111 2012 083535
51. X.J. Wang, Y.C. Li, J.Y. Xiong, P.D. Hodgson, and C.E. Wen Porous TiNbZr alloy scaffolds for biomedical applications Acta Biomater 5 2009 3616 3624
52. ASTM F67-06, Standard Specification for Unalloyed Titanium for Surgical Implant Applications. ASTM Standards, v. 13.01, Medical Devices and Services. West Conshohocken, PA: ASTM International; 2011.
53. ASTM F1472-08, Standard Specification for Wrought Titanium-6Aluminium- 4Vanadium Alloy for Surgical Implant Applications. ASTM Standards, v. 13.01, Medical Devices and Services. West Conshohocken, PA: ASTM International; 2011.