Smart wireless sensing and assessment for civil infrastructure

Structure and Infrastructure Engineering

Volumn 10, Issue 4, 2014, Pages 534-550

  Yun, Chung Bang ^a   Cho, Soojin ^b   Park, Hyun Jun ^c   Min, Jiyoung ^b   Park, Jong Woong ^d  

^a Ulsan National Institute of Science and Technology   (South Korea)

^b University of Illinois at Urbana Champaign   (United States)

^c University of California at Irvine   (United States)

^d Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

Author keywords

assessment; optoelectronic technology; structural health monitoring; wireless impedance sensor node; wireless sensor

Indexed keywords

EID: 84894240230     PISSN: 15732479     EISSN: 17448980     Source Type: Journal    
DOI: 10.1080/15732479.2013.769011     Document Type: Article

References (44)

1. An, Y.K., & Sohn, H. (2010). Instantaneous crack detection under varying temperature and static loading conditions. Structural Control and Health Monitoring, 17(7), 730-741.
2. Baptista, F.G., & Filho, J.V. (2009). A new impedance measurement system for PZT-based structural health monitoring. IEEE Transactions on Instrumentation and Measurement, 58(10), 3602-3608.
3. Bhalla, S., Naidu, A.S.K., & Soh, C.K. (2002). Influence of structure-actuator interactions and temperature on piezoelectric mechatronic signatures for NDE. Proceedings of ISSS-SPIE Conferences on Smart Materials Structures and Systems. Bangalore, India.
4. Chaudhry, Z., & Ganino, A.J. (1994). Damage detection using neural networks: An initial experimental study on de-bonded beams. Journal of Intelligent Material Systems and Structures, 5, 585-589.
5. Cho, S. (2011). Structural health monitoring of cable-stayed bridge using wireless smart sensors. PhD dissertation. KAIST, Korea.
6. Cho, S., Jang, S., Jo, H., Park, J., Jung, H.J., Yun, C.B., Spencer, B.F., & Seo, J. (2010). Structural health monitoring of a cable-stayed bridge using smart sensor technology: Data analysis. Smart Structures and Systems, 6(5-6), 461-480.
7. Clarke, T., Simonetti, F., Rohklin, S., & Cawley, P. (2009). Development of a low-frequency high purity A0 mode transducer for SHM applications. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 67(7), 1457-1468.
8. Giurgiutiu, V., Reynolds, A., & Rogers, C.A. (1999). Experimental investigation of E/M impedance health monitoring of spot-welded structure joints. Journal of Intelligent Material Systems and Structures, 10, 802-812.
9. Grisso, B.L., & Inman, D.J. (2005). Developing an autonomous on-orbit impedance-based SHM system for thermal protection systems. In:Proceedings of 5th Workshop on Structural Health Monitoring, Stanford, USA.
10. ISHMP (2011). http://shm.cs.uiuc.edu/ (website).
11. Jang, S., Jo, H., Cho, S., Mechitov, K.A., Rice, J.A., Sim, S.H., Jung, H.J., Yun, C.B., Spencer, B.F., & Agha, G. (2010). Structural health monitoring of a cable-stayed bridge using smart sensor technology: Deployment and evaluation. Smart Structures and Systems, 6(5-6), 439-459.
12. Jo, H., Sim, S.H., Mechitov, K.A., Kim, R., Li, J., Moinzadeh, P., Spencer, B.F., Park, J.W., Cho, S., Jung, H.J., Yun, C.B., Rice, J.A., & Nagayama, T. (2011). Hybrid wireless smart sensor network for full-scale structural health monitoring of a cable-stayed bridge. Proceedings of the SPIE Smart Structures/NDE Conference. San Diego, CA.
13. Kim, M.K., Lim, H.J., Sohn, H., & Park, C.Y. (2010). Impedance-based bolt loosening detection under varying temperature and loading. Asian Pacific Workshop on Structural Health Monitoring, Tokyo, Japan.
14. Koo, K.Y., Park, S., Lee, J.J., & Yun, C.B. (2009). Automated impedance-based structural health monitoring incorporating effective frequency shift for compensating temperature effects. Journal of Intelligent Material Systems and Structures, 20, 367-377.
15. Korea Society of Civil Engineers (2006). Korean design guidelines of steel cable-supported bridges. Seoul, Korea: Haklimsa[in Korean].
16. Lee, S.J., & Sohn, H. (2006). Active self-sensing scheme development for structural health monitoring. Smart Materials and Structures, 15, 1734-1746.
17. Liang, C., Sun, F.P., & Rogers, C.A. (1994). Coupled electromechanical analysis of adaptive material systems-determination of the actuator power consumption and system energy transfer. Journal of Intelligent Material Systems and Structures, 5, 12-20.
18. Lopes, J.r., Park, G., Cudney, H.H., & Inman, D.J. (2000). Impedance-based structural health monitoring with artificial neural networks. Journal of Intelligent Material Systems and Structures, 11, 206-214.
19. Lynch, J.P., Sundararajan, A., Law, K.H., Sohn, H., & Farrar, C.R. (2004). Design of a wireless active sensing unit for structural health monitoring. Proceedings of SPIE Annual Symposium on Smart Structures and Materials, San Diego, CA.
20. Mascarenas, D.L., Todd, M.D., Park, G., & Farrar, C.R. (2007). Development of an impedance-based wireless sensor node for structural health monitoring. Smart Materials and Structures, 16, 2137-2145.
21. MEMSIC (2011). http://www.memsic.com/ (website).
22. Min, J., Park, S., & Yun, C.B. (2010a). Impedance-based structural health monitoring using neural networks for autonomous frequency range selection. Smart Materials and Structures, 19(12), 1-10. 10.1088/0964-1726/19/12/125011.
23. Min, J., Park, S., Yun, C-B., & Song, B. (2010b). Development of a low-cost multifunctional wireless impedance sensor node. Smart Structures and Systems, 6(5-6), 689-709.
24. Min, J., Yun, C-B., Park, S., Lee, C-G., & Lee, C. (2012). Damage type and severity diagnosis using neural network-based autonomous frequency range selection for impedance-based structural health monitoring. Engineering Structures, 39, 210-220.
25. Moulin, E., Assaad, J., Delebarre, C., Kaczmarek, H., & Balageas, D. (1997). Piezoelectric transducer embedded in a composite plate: Application to Lamb wave generation. Journal of Applied Physics, 82, 2049-2055.
26. Nagayama, T., Sim, S.H., Miyamori, Y., & Spencer, B.F. (2007). Issues in structural health monitring employing smart sensors. Smart Structures and Systems, 3(3), 299-320.
27. Okafor, A.C., Chandrashekhara, K., & Jiang, Y.P. (1996). Delamination prediction in composite beams with built-in piezoelectric devices using modal analysis and neural network. Smart Materials and Structures, 5, 338-347.
28. Overly, T.G., Park, G., Farinholt, K.M., & Farrar, C.R. (2008). Development of an extremely compact impedance-based wireless sensing device. Smart Materials and Structures, 17(6), 065011.
29. Park, H.J. (2011). Laser-based wireless active sensing techniques for structural health monitoring of civil infrastructures. PhD dissertation. KAIST, Korea.
30. Park, Y.S., Choi, S.M., Yang, W.Y., Hong, H.J., & Kim, W.H. (2008). A study on tension for cables of a cable-stayed bridge damper is attached. Journal of Korean Society of Steel Construction, 20(5), 609-616, [in Korean].
31. Park, G., Kabeya, K., Cudney, H.H., & Inman, D.J. (1999). Impedance-based structural health monitoring for temperature varying applications. JSME International Journal Series A, 42, 249-258.
32. Park, S., Shin, H.H., & Yun, C.B. (2009). Wireless impedance sensor nodes for functions of structural damage identification and sensor self-diagnosis. Smart Materials and Structures, 18, 1-11.
33. Park, G., Sohn, H., Farrar, C.R., & Inman, D.J. (2003). Overview of piezoelectric impedance-based health monitoring and path forward. The Shock and Vibration Digest, 35(6), 451-463.
34. Park, H.J., Sohn, H., Yun, C.B., Chung, J., & Kwon, I.-B. (2010). A wireless guided wave excitation technique based on laser and optoelectronics. Smart Structures and Systems, 6(5-6), 749-765.
35. Park, H.J., Sohn, H., Yun, C.B., Chung, J., & Lee, M. (2012). Wireless guided wave and impedance measurement using laser and piezoelectric transducers. Smart Materials and Structures, 21, 035029.
36. Park, H.J., Sohn, H., Yun, C.B., Chung, J., & Lee, M. (2011). San Diego, CADevelopment of a non-contact PZT excitation and sensing technology via laser. Proceedings of SPIE Annual Symposium on Smart Structures and Materials and Nondestructive Evaluation and Health Monitoring.
37. Peairs, D.M., Tarazaga, P.A., & Inman, D.J. (2006). Leuven, BelgiumA study of the correlation between PZT and MFC resonance peaks and damage detection frequency intervals using the impedance method. Proceedings of Noise Vibration Engineerin.
38. Raghavan, A., & Cesnik, E.S. (2007). Review of guided-wave structural health monitoring. The Shock and Vibration Digest, 39(2), 91-114.
39. Rice, J.A., Mechitov, K., Sim, S.H., Nagayama, T., Jang, S., Kim, R., Spencer, B.F., Agha, G., & Fujino, Y. (2010). Flexible smart sensor framework for autonomous structural health monitoring. Smart Structures and Systems, 6(5-6), 423-438.
40. Shimada, T. (1994). Estimating method of cable tension from natural frequency of high mode. Proceeding of JSCE 501/1-29, Tokyo, Japan [in Japanese].
41. Spencer, B.F.Jr, & Cho, S. (2011). Wireless smart sensor technology for monitoring civil infrastructure: Technological developments and full-scale applications. Seoul, Korea: The 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM′11+).
42. Sun, F., Rogers, C.A., & Liang, C. (1996). Structural frequency response function acquisition via electric impedance measurement of surface-bonded piezoelectric sensor/actuator. Proceedings of Structural Dynamics and Materials, Huston, TX.
43. Taylor, S.G., Farinholt, K.M., Park, G., & Farrar, C.R. (2009). Wireless impedance device for electromechanical impedance sensing and low-frequency vibration data acquisition. Proceedings of SPIE Annual Symposium on Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, San Diego, CA.
44. Yun, C.B., Lee, J.J., & Koo, K.Y. (2011). Smart structure technologies for civil infrastructures in Korea: Recent research and applications. Structure and Infrastructure Engineering, 7(9), 673-688.