Value-based global optimization

Journal of Mechanical Design, Transactions of the ASME

Volumn 136, Issue 4, 2014, Pages

  Moore, Roxanne A ^a   Romero, David A ^b   Paredis, Christiaan J J ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b UNIVERSITY OF TORONTO   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

COST BENEFIT ANALYSIS; FUEL ADDITIVES; KRIGING;

ANALYSIS MODELS; EFFICIENT GLOBAL OPTIMIZATION; GLOBAL OPTIMISATION; GLOBAL OPTIMIZATION ALGORITHM; KRIGING; PERFORMANCE; SEQUENTIAL SAMPLING; SURROGATE MODELING; VALUE OF INFORMATION; VALUE-BASED;

GLOBAL OPTIMIZATION;

EID: 84894168621     PISSN: 10500472     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.4026281     Document Type: Article

References (55)

1. Von Neumann, J., and Morgenstern, O., 1980, Theory of Games and Economic Behavior, Princeton University Press, Princeton, NJ.
2. Lewis, K. E., Chen, W., and Schmidt, L. C., 2006, Decision Making in Engineering Design, American Society of Mechanical Engineers, New York.
3. Thompson, S. C., and Paredis, C. J. J., 2010. An Investigation into the Decision Analysis of Design Process Decisions. ASME J. Mech. Des., 132(12), p. 121009.
4. Jones, D. R., Matthias, S., and Welch, W. J., 1998. Efficient Global Optimization of Expensive Black-Box Functions. J. Global Optim., 13(4), pp. 455-492. (Pubitemid 128507405)
5. Moore, R. A., Kerzhner, A. A., and Paredis, C. J. J., 2009. Model-Based Optimization of a Hydraulic Backhoe Using Multi-Attribute Utility Theory. SAE Int. J. Mater. Manuf., 2(1), pp. 298-309.
6. Jones, D. R., 2001. A Taxonomy of Global Optimization Methods Based on Response Surfaces. J. Global Optim., 21(4), pp. 345-383. (Pubitemid 33672374)
7. Eldred, M. S., Giunta, A. A., Wojtkiewicz, S. F., and Trucano, T. G., 2002. Formulations for Surrogate-Based Optimization Under Uncertainty. AIAA Paper No. 2002-5585, Atlanta, GA, 189(194).
8. Ong, Y. S., Nair, P. B., Keane, A. J., and Wong, K. W., 2004. Surrogate-Assisted Evolutionary Optimization Frameworks for High-Fidelity Engineering Design Problems. Knowledge Incorporation in Evolutionary Compuation, Springer Verlag, Springer-Verlag Berlin Heidelberg 2005.
9. Sacks, J. S., Susannah, B., and Welch, W. J., 1989. Designs for Computer Experiments. Technometrics, 31(1), pp. 41-47.
10. Sacks, J., Welch, W. J., Mictchell, T. J., and Wynn, H. P., 1989. Design and Analysis of Computer Experiments. Statist. Sci., 4(4), pp. 409-435.
11. Shan, S. W., and Gary, G., 2010. Metamodeling for High Dimensional Simulation-Based Design Problems. ASME J. Mech. Des., 132(5), p. 051009.
12. Simpson, T. W., Poplinski, J. D., Koch, P. N., and Allen, J. K., 2001. Metamodels for Computer-Based Engineering Design: Survey and Recommendations. Eng. Comput., 17(2), pp. 129-150. (Pubitemid 32659225)
13. Welch, W. J., Buck, R. J., Sacks, J., Wynn, H. P., Mitchell, T. J., and Morris, M. D., 1992. Screening, Predicting, and Computer Experiments. Technometrics, 34(1), pp. 15-25.
14. Mckay, M. D., Beckman, R. J., and Conover, W. J., 1979. A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output From a Computer Code. Technometrics, 22(2), pp. 239-245. (Pubitemid 9452235)
15. Xiong, F., Xiong, Y., Chen, W., and Yang, S., 2009. Optimizing Latin Hypercube Design for Sequential Sampling of Computer Experiments. Eng. Optim., 41(8), pp. 793-810.
16. Handcock, M. S., 1991. On Cascading Latin Hypercube Designs and Additive Models for Experiments. Commun. Stat. Theory Methods, 20(2), pp. 417-439.
17. Tang, B., 1993. Orthogonal Array-Based Latin Hypercubes. J. Am. Stat. Assoc., 88(424), pp. 1392-1397.
18. Joseph, V. R., and Hung, Y., 2008. Orthogonal-Maximin Latin Hypercube Designs. Statistica Sinica, 18(1), pp. 171-186.
19. Huang, D., Allen, T. T., Notz, W. I., and Miller, R. A., 2006. Sequential Kriging Optimization Using Multiple-Fidelity Evaluations. Struct. Multidiscip. Optim., 32(5), pp. 369-382. (Pubitemid 44483493)
20. Ginsbourger, D., Le Riche, R., and Carraro, L., 2008. A Multi-Points Criterion for Deterministic Parallel Global Optimization Based on Gaussian Processes. Available at: Http://hal.archives-ouvertes.fr/hal-00260579
21. Jones, D. R., Schonlau, M., and Welch, W. J., 1998. Efficient Global Optimization of Expensive Black-Box Functions. J. Global Optim., 13(4), pp. 455-492. (Pubitemid 128507405)
22. Paredis, C. J. J., 1996. An Agent-Based Approach to the Design of Rapidly Deployable Fault Tolerant Manipulators. Ph.D. thesis, Carnegie Mellon University, Pittsburgh, PA.
23. Alexandrov, N. M., Lewis, R. M., Gumbert, C. R., Green, L. L., and Newman, P. A., 1999. Optimization With Variable-Fidelity Models Applied to Wing Design. Institute for Computer Applications in Science and Engineering, Hampton, VA, Report No. NASA/CR-1999-209826.
24. Schmit, L. A., and Farshi, B., 1974. Some Approximation Concepts for Structural Synthesis. AIAA J., 12(5), pp. 692-699.
25. Gano, S. E., Perez, V. M., Renaud, J. E., and Batill, S. M., 2004. Multilevel Variable Fidelity Optimization of a Morphing Unmanned Aerial Vehicle. AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, C.A.
26. Le Moigne, A., and Qin, N., 2004. Variable-Fidelity Aerodynamic Optimization for Turbulent Flows Using a Discrete Adjoint Formulation. AIAA J., 42(7), pp. 1281-1292.
27. Hays, R., and Singer, M., 1989, Simulation Fidelity in Training System Design: Bridging the Gap between Reality and Training, Springer-Verlag, New York.
28. Cellier, F. E., 1991, Continuous System Modeling, Springer-Verlag, New York.
29. Gurnani, A., Ferguson, S., Lewis, K., and Donndelinger, J., 2006. A Constraint-Based Approach to Feasibility Assessment in Preliminary Design. Artif. Intell. Eng. Des., Anal. Manuf., 20(4), pp. 351-367. (Pubitemid 46445572)
30. Paredis, C. J. J., and Khosla, P. K., 1997. Agent-Based Design of Fault Tolerant Manipulators for Satellite Docking. Proceedings of the 1997 IEEE Conference on Robotics and Automation, Albuquerque, NM, Vol. 4, pp. 3473-3480.
31. Bakr, M. H., and Bandler, J. W., 2000. Review of the Space Mapping Approach to Engineering Optimization and Modeling. Optim. Eng., 1(3), pp. 241-276.
32. Alexandrov, N. M., and Lewis, R. M., 2001. An Overview of First-Order Model Management for Engineering Optimization. Optim. Eng., 2(4), pp. 413-430.
33. Alexandrov, N. M., Lewis, R. M., Gumbert, C. R., Green, L. L., and Newman, P. A., 2001. Approximation and Model Management in Aerodynamic Optimization With Variable-Fidelity Models. J. Aircraft, 38(6), pp. 1093-1101. (Pubitemid 34012563)
34. Moore, R. A., 2009. Variable Fidelity Modeling as Applied to Trajectory Optimization for a Hydraulic Backhoe. Masters thesis, Georgia Institute of Technology, Atlanta, GA.
35. Rodriguez, J. F., and Renaud, J. E., 1998. Convergence of Trust Region Augmented Lagrangian Methods Using Variable Fidelity Approximation Data. Struct. Optim., 15(3), pp. 141-156. (Pubitemid 128647627)
36. Rodriguez, J. F., Perez, V. M., Padmanabhan, D., and Renaud, J. E., 2001. Sequential Approximate Optimization Using Variable Fidelity Response Surface Approximations. Struct. Multidiscip. Optim., 22(1), pp. 23-34.
37. Xia, L., and Gao, Z.-H., 2006. Application of Variable-Fidelity Models to Aerodynamic Optimization. Appl. Math. Mech., 27(8), pp. 1089-1095.
38. Lawrence, D. B., 1999, The Economic Value of Information, Springer Science+Business Media, New York.
39. Howard, R., 1966. Information Value Theory. IEEE Trans. Syst. Sci. Cybernet., SSC-2(1), pp. 779-783.
40. Brathwaite, J., and Saleh, J. H., 2009. Value-Centric Framework and Pareto Optimality for Design and Acquisition of Communication Satellites. Int. J. Satellite Commun., 27(6), pp. 330-348.
41. Cheung, J., Scanlan, J., Wong, J., Forrester, J., Eres, H., Collopy, P., Hollingsworth, P., Wiseall, S., and Briceno, S., 2010. Application of Value-Driven Design to Commercial Aero-Engine System. 10th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference, Fort Worth, TX.
42. Collopy, P., and Hollingsworth, P., 2009, Value-Driven Design, American Institute of Aeronautics and Astronautics, Reston, VA, pp. 2009-7099.
43. Hazelrigg, G. A., 2012, Fundamentals of Decision Making for Engineering Design and Systems Engineering. Available at: Http://www. engineeringdecisionmaking. com/
44. Cressie, N. A. C., 1993, Statistics for Spatial Data, John Wiley & Sons, Inc., New York.
45. Gano, S. E., Renaud, J. E., Martin, J. D., Simpson, T. W., 2005. Update Strategies for Kriging Models for Use in Variable Fidelity Optimization. 1st AIAA Multidisciplinary Design Optimization Specialist Conference, Austin, TX.
46. Handcock, M. S. S., and Michael, L., 1993. A Bayesian Analysis of Kriging. Technometrics, 35(4), pp. 403-410.
47. Lophaven, S. N., Nielsen, H. B., and Sondergaard, J., 2002. Dace: A Matlab Kriging Toolbox. Technical University of Denmark, Report No. IMM-TR-2002-12.
48. Ankenman, B., Nelson, B. L., and Staum, J., 2008. Stochastic Kriging for Simulation Metamodeling. Proceedings of the 40th Conference on Winter Simulation, Miami, FL, pp. 362-370.
49. Kennedy, M., and Ohagan, A., 2001. Bayesian Calibration of Computer Models. J. R. Stat. Soc., Ser. B (Statistical Methodology), 63(3), pp. 425-464.
50. Huang, D., Allen, T. T., Notz, W. I., and Zeng, N., 2006. Global Optimization of Stochastic Black-Box Systems Via Sequential Kriging Meta-Models. J. Global Optim., 34(3), pp. 441-466. (Pubitemid 43352177)
51. Kennedy, M. C., and Ohagan, A., 2000. Predicting the Output From a Complex Computer Code When Fast Approximations are Available. Biometrika, 87(1), pp. 1-13.
52. Bernardo, J. M., and Smith, A. F. M., 1994, Bayesian Theory, John Wiley & Sons, Inc., New York.
53. Moore, R. A., 2012. Value-Based Global Optimization. Ph.D. thesis, Georgia Institute of Technology, Atlanta, GA.
54. Kahn, H., and Marshall, A. W., 1953. Methods of Reducing Sample Size in Monte Carlo Computations. J. Oper. Res. Soc. Am., 1(5), pp. 263-271.
55. Li, P. Y., and Mensing, F., 2010. Optimization and Control of a Hydro-Mechanical Transmission Based Hybrid Hydraulic Passenger Vehicle. 7th International Fluid Power Conference, Aachen, Germany.