Resilient modulus and permanent deformation responses of geogrid-reinforced construction and demolition materials

Journal of Materials in Civil Engineering

Volumn 26, Issue 3, 2014, Pages 512-519

  Rahman, M A ^a   Arulrajah, A ^a   Piratheepan, J ^a   Bo, M W ^b   Imteaz, M A ^a  

^a SWINBURNE UNIVERSITY OF TECHNOLOGY   (Australia)

^b DST CONSULTING ENGINEERS INC   (Canada)

Author keywords

Demolition; Geogrids; Geotechnical; Recycled materials; Resilient modulus

Indexed keywords

EID: 84894038814     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)MT.1943-5533.0000824     Document Type: Article

References (67)

1. AASHTO. (1993). "Guide for the design of pavement structures." Washington, DC.
2. AASHTO. (2003). "Determining the resilient modulus of soils and aggregate materials." T-307-99, Washington, DC.
3. Aatheesan, T., Arulrajah, A., Bo, M. W., Vuong, B., and Wilson, J. (2010)."Crushed brick blends with crushed rock for pavement systems." Proc. Inst. Civ. Eng.: Waste Resour. Manage., 163(1), 29-35.
4. Abu-Farsakh, M., Nazzal, M., and Mohammad, L. (2007). "Effect of reinforcement on resilient and permanent deformations of base course material." Transportation Research Record No. 2004, Transportation Research Board, Washington, DC, 120-131.
5. Alfaro, M. C., Miura, N., and Bergado, D. T. (1995). "Soil geogrid reinforcement interaction by pullout and direct shear tests." Geotech. Test. J., 18(2), 157-167.
6. Ali, M. M. Y., Arulrajah, A., Disfani, M. M., and Piratheepan, J. (2011). "Suitability of using recycled glass-crushed rock blends for pavement subbase applications." Geo-Frontiers 2011: Advances in Geotechnical Engineering, ASCE, Reston, VA, 1325-1334.
7. Apotheker, S. (1990). "Construction and demolition debris: The invisible waste stream." Resour. Conserv. Recycl., 9, 66-74.
8. Arulrajah, A., Ali, M. M. Y., Piratheepan, J., and Bo, M. W. (2012c). "Geotechnical properties of waste excavation rock in pavement subbase applications." J. Mater. Civ. Eng., 10.1061/(ASCE)MT.1943-5533 .0000419, 924-932.
9. Arulrajah, A., Piratheepan, J., Aatheesan, T., and Bo, M. W. (2011a). "Geotechnical properties of recycled crushed brick in pavement applications." J. Mater. Civ. Eng., 10.1061/(ASCE)MT.1943-5533.0000319, 1444-1542.
10. Arulrajah, A., Disfani, M. M., Suthagaran, V., and Imteaz, M. (2011b). "Select chemical and engineering properties of wastewater biosolids." Waste Manage., 31(12), 2522-2526.
11. Arulrajah, A., Piratheepan, J., Bo, M. W., and Sivakugan, N. (2012a). "Geotechnical characteristics of recycled crushed brick blends for pavement sub-base applications." Can. Geotech. J., 49(7), 796-811.
12. Arulrajah, A., Piratheepan, J., Ali, M. M. Y., and Bo, M. W. (2012b). "Geotechnical properties of recycled concrete aggregate in pavement sub-base applications." Geotech. Test. J., 35(5), 1-9.
13. Arulrajah, A., Piratheepan, J., Disfani, M. M., and Bo, M. W. (2013a). "Geotechnical and geoenvironmental properties of recycled construction and demolition materials in pavement subbase applications." J. Mater. Civ. Eng., 10.1061/(ASCE)MT.1943-5533.0000652, 1077-1088.
14. Arulrajah, A., Ali, M. M. Y., Disfani, M. M., Piratheepan, J., and Bo, M.W. (2013b). "Geotechnical performance of recycled glass-waste rock blends in footpath bases." J. Mater. Civ. Eng., 10.1061/(ASCE)MT .1943-5533.0000617, 653-661.
15. Arulrajah, A., Disfani, M. M., Suthagaran, V., and Bo, M. W. (2013c). "Laboratory evaluation of the geotechnical characteristics of wastewater biosolids in road embankments." J. Mater. Civ. Eng., 10.1061/(ASCE) MT.1943-5533.0000739, 1682-1691.
16. Arulrajah, A., Piratheepan, J., Disfani, M. M., and Bo, M. W. (2013d). "Resilient moduli response of recycled construction and demolition materials in pavement subbase applications." J. Mater. Civ. Eng., 10.1061/(ASCE)MT.1943-5533.0000766, 1920-1928.
17. ASTM. (2006). "Standard test method for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine." C131, West Conshohocken, PA.
18. ASTM. (2007a). "Standard test method for particle-size analysis of soils." D422-63, West Conshohocken, PA.
19. ASTM. (2007b). "Standard test method for CBR (California Bearing Ratio) of laboratory-compacted soils." D1883-07, West Conshohocken, PA.
20. ASTM. (2007c). "Standard test methods for moisture, ash, and organic matter of peat and other organic soils." D2974, West Conshohocken, PA.
21. ASTM. (2009). "Standard test methods for laboratory compaction characteristics of soil using modified effort." D1557,West Conshohocken, PA.
22. Austroads. (2004). "Pavement design-A guide to the structural design of road pavements." Austroads, Sydney, NSW.
23. Azam, A. M., and Cameron, D. A. (2013). "Geotechnical properties of blends of recycled clay masonry and recycled concrete aggregates in unbound pavement construction." J. Mater. Civ. Eng., 10.1061/ (ASCE)MT.1943-5533.0000634, 788-798.
24. Bianchini, G., Marrocchino, E., Tassinari, R., and Vaccaro, C. (2005). "Recycling of construction and demolition waste materials: A chemical-mineralogical appraisal." Waste Manage., 25(2), 149-159.
25. British Standard Institution (BSI). (2000). "Method for determination of particle shape: Flakiness index." BS812-105.1, London.
26. Chen, Q., Abu-Farsakh, M., Voyiadjis, G. Z., and Souci, G. (2013). "Shakedown analysis of geogrid-reinforced granular base material ." J. Mater. Civ. Eng., 10.1061/(ASCE)MT.1943-5533.0000601, 337-346.
27. Chung, S. S., and Lo, C. W. H. (2003). "Evaluating sustainability in waste management: The Case of construction and demolition, chemical and clinical wastes in Hong Kong." Resour. Conserv. Recycl., 37(2), 119-145.
28. Dawson, A. R., and Wellner, F. (1999). "Plastic behavior of granular materials." Rep. ARC Project 933 Reference PRG99014, Univ. of Nottingham, Nottingham, U.K.
29. Debieb, F., and Kenai, S. (2008). "The use of coarse and fine crushed bricks as aggregate in concrete." Constr. Build. Mater., 22(5), 886-893.
30. Disfani, M. M., Arulrajah, A., Bo, M. W., and Hankour, R. (2011). "Recycled crushed glass in road work applications." Waste Manage., 31(11), 2341-2351.
31. Disfani, M. M., Arulrajah, A., Bo, M.W., and Sivakugan, N. (2012). "Environmental risks of using recycled crushed glass in road applications." J. Cleaner Prod., 20(1), 170-179.
32. Fang-Le, P., and Jian-Zhong, L. (2004). "Modeling of state parameter and hardening function for granular materials." J. Central South Univ. Technol., 11(2), 176-179.
33. Gabr, A., and Cameron, D. (2012). "Properties of recycled concrete aggregate for unbound pavement construction." J. Mater. Civ. Eng., 10.1061/ (ASCE)MT.1943-5533.0000447, 754-764.
34. Gavilan, R. M., and Bernold, L. E. (1994). "Source evaluation of solid waste in building construction." J. Constr. Eng. Manage., 10.1061/ (ASCE)0733-9364(1994)120:3(536), 536-552.
35. Gnanendran, C. T., and Woodburn, L. J. (2003). "Recycled aggregate for pavement construction and the influence of stabilization." Proc., Conf. of the Australian Road Research Board, Vol. 21, ARRB Group, Vermont South VIC, 1755-1768.
36. Goodhue, M. J., Edil, T. B., and Benson, C. H. (2000). "Interaction of foundry sands with geosynthetics." J. Geotech. Geoenviron. Eng., 10.1061/(ASCE)1090-0241(2001)127:4(353), 353-362.
37. Han, J., et al. (2011). "Performance of geocell-reinforced RAP bases over weak subgrade under full-scale moving wheel loads." J. Mater. Civ. Eng., 10.1061/(ASCE)MT.1943-5533.0000286, 1525-1534.
38. Hoyos, L. R., Puppala, A. J., and Ordonez, C. A. (2011). "Characterization of cement fiber-treated reclaimed asphalt pavement aggregates: Preliminary investigation." J. Mater. Civ. Eng., 10.1061/(ASCE)MT .1943-5533.0000267, 977-989.
39. Huang, W. L., Lin, D. H., Chang, N. B., and Lin, K. S. (2002). "Recycling of construction and demolition waste via a mechanical sorting process." Resour. Conserv. Recycl., 37(1), 23-37.
40. Imteaz, M. A., Ali, M. M. Y., and Arulrajah, A. (2012). "Possible environmental impacts of recycled glass used as a pavement base material." Waste Manage. Res., 30(9), 917-921.
41. Indraratna, B., and Salim, W. (2003). "Deformation and degradation mechanism of recycled ballast stabilized with geosynthetics." Soils Found., 43(4), 35-46.
42. Indraratna, B., Salim, W., and Christie, D. H. (2002). "Improvement of recycled ballast using geosynthetics." Rail Int., 33(4), 20-29.
43. Indraratna, B., Shahin, M. A., and Salim, W. (2005). "Use of geosynthetics for stabilizing recycled ballast in railway track substructures." Proc., NAGS2005/GRI 19 Cooperative Conf., North American Geosynthetics Society, Albany, NY, 1-15.
44. Korkiala, T. L., and Dawson, A. (2007). "Relating full-scale pavement rutting to laboratory permanent deformation testing." Int. J. Pavement Eng., 8(1), 19-28.
45. Liu, C. N., Ho, Y. H., and Huang, J. W. (2009a). "Large scale direct shear tests of soil/pet-yarn geogrid interfaces." Geotext. Geomembr., 27(1), 19-30.
46. Liu, C. N., Zornberg, J. G., Chen, T. C., Ho, Y. H., and Lin, B. H. (2009b). "Behavior of geogrid-sand interface in direct shear mode." J. Geotech. Geoenviron. Eng., 10.1061/(ASCE)GT.1943-5606 .0000150, 1863-1871.
47. Liu, X., Scarpas, A., Blaauwendraad, J., and Genske, D. D. (1998). "Geogrid reinforcing of recycled aggregate materials for road construction: Finite Element Investigation." Transportation Research Record 1611, Transportation Research Board, Washington, DC, 78-85.
48. MacGregor, J. A. C., Highter,W. H., and DeGroot, D. J. (1999). "Structural numbers for reclaimed asphalt pavement base and subbase course mixes." Transportation Research Record 1687, Transportation Research Board, Washington, DC, 22-28.
49. Maher, M. H., Gucunski, N., and Papp, W. J. (1997). "Recycled asphalt pavement as a base and sub-base material." ASTM Special Technical Publication 1275, New Orleans, 42-53.
50. MATLAB Version 8 [Computer software]. Matrix laboratory.
51. McKelvey, D., Sivakumar, V., Bell, A., and McLaverty, G. (2002). "Shear strength of recycled construction materials intended for use in vibro ground improvement." Ground Improv., 6(2), 59-68.
52. Mengelt, M. J., Edil, T. B., and Benson, C. H. (2000). "Reinforcement of flexible pavements using geocells." Geo Engineering Rep. No. 00-04, Univ. of Wisconsin-Madison, Madison, WI.
53. Moghaddas-Nejad, F., and Small, J. C. (2003). "Resilient and permanent characteristics of reinforced granular materials by repeated load triaxial tests." Geotech. Test. J., 26(2), 152-166.
54. Nazzal, M. (2007). "Laboratory characterization and numerical modeling of geogrid reinforced bases in flexible pavements." Ph.D. dissertation, Louisiana State Univ., Baton Rouge, LA.
55. Piratheepan, J., Arulrajah, A., and Disfani, M. M. (2013). "Large-scale direct shear testing of recycled construction and demolition materials." Adv. Civ. Eng. Mater., 2(1), 12.
56. Poon, C. S., and Chan, D. (2006a). "Feasible use of recycled concrete aggregates and crushed clay brick as unbound road sub-base." Constr. Build. Mater., 20(8), 578-585.
57. Poon, C. S., and Chan, D. (2006b). "Paving blocks made with recycled concrete aggregate and crushed clay brick." Constr. Build. Mater., 20(8), 569-577.
58. Puppala, A. J., Hoyos, L. R., and Potturi, A. K. (2011). "Resilient moduli response of moderately cement-treated reclaimed asphalt pavement aggregates." J. Mater. Civ. Eng., 10.1061/(ASCE)MT.1943-5533 .0000268, 990-998.
59. Puppala, A. J., Mohammad, L. N., and Allen, A. (1997). "Engineering behavior of lime-treated Louisiana subgrade soil." Transportation Research Record 1546, Transportation Research Board, National Academy of Science, Washington, DC, 24-31.
60. Rao, A., Jha, K. N., and Misra, S. (2007). "Use of aggregates from recycled construction and demolition waste in concrete." Resour. Conserv. Recycl., 50(1), 71-81.
61. Standards Association of Australia (SAA). (1996). "Method for sampling and testing aggregates-Particle size distribution by sieving." AS1141.11, Sydney, Australia.
62. Standards Association of Australia (SAA). (2000a). "Particle density and water absorption of fine aggregate." AS1141.5, Sydney, Australia.
63. Standards Association of Australia (SAA). (2000b). "Particle density and water absorption of coarse aggregate: Weighing-in-water method." AS1141.6.1, Sydney, Australia.
64. Taha, R., Al-Harthy, A., Al-Shamsi, K., and Al-Zubeidi, M. (2002). "Cement stabilization of reclaimed asphalt pavement aggregate for road bases and subbases." J. Mater. Civ. Eng., 10.1061/(ASCE)0899-1561 (2002)14:3(239), 239-245.
65. Tam, V. W. Y., and Tam, C. M. (2007). "Crushed aggregates production from centralized combined and individual waste sources in Hong Kong." Constr. Build. Mater., 21(4), 879-886.
66. Tatlisoz, N., Edil, T. B., and Benson, C. H. (1998). "Interaction between reinforcing geosynthetics and soil-tire chip mixtures." J. Geotech. Geoenviron. Eng., 10.1061/(ASCE)1090-0241(1998)124:11(1109), 1109-1119.
67. Thakur, J. K., Han, J., Pokharel, S. K., and Parsons, R. L. (2012). "Performance of geocell-reinforced recycled asphalt pavement (RAP) bases over weak subgrade under cyclic plate loading." Geotext. Geomembr., 35, 14-24.