10-Year follow-up wear analysis of first-generation highly crosslinked polyethylene in primary total hip arthroplasty

Journal of Arthroplasty

Volumn 29, Issue 3, 2014, Pages 630-633

  Snir, Nimrod ^a   Kaye, Ian D ^a   Klifto, Christopher S ^a   Hamula, Mathew J ^a   Wolfson, Theodore S ^a   Schwarzkopf, Ran ^b   Jaffe, Fredrick F ^a  

^a NYU HOSPITAL FOR JOINT DISEASES   (United States)

^b UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

10 year follow up; First generation; Highly cross linked polyethylene; Total hip arthroplasty; Wear analysis

Indexed keywords

10-YEAR FOLLOW-UP; FIRST GENERATION; HIGHLY CROSS LINKED POLYETHYLENE; TOTAL HIP ARTHROPLASTY; WEAR ANALYSIS;

ADULT; AGED; ARTHROPLASTY, REPLACEMENT, HIP; BIOCOMPATIBLE MATERIALS; DIAGNOSIS, COMPUTER-ASSISTED; EQUIPMENT FAILURE ANALYSIS; FEMALE; FOLLOW-UP STUDIES; HIP JOINT; HUMANS; JOINT DISEASES; MALE; MIDDLE AGED; OSTEOLYSIS; POLYETHYLENE; PROSTHESIS FAILURE; SOFTWARE;

EID: 84893873581     PISSN: 08835403     EISSN: 15328406     Source Type: Journal    
DOI: 10.1016/j.arth.2013.07.034     Document Type: Article

References (46)

1. Harris W.H. The first 50 years of total hip arthroplasty: lessons learned. Clin Orthop Relat Res 2009, 467:28.
2. Harris W.H. The problem is osteolysis. Clin Orthop Relat Res 1995, 46.
3. Geerdink C.H., Grimm B., Vencken W., et al. Cross-linked compared with historical polyethylene in THA. An 8-year clinical study. Clin Orthop Relat Res 2008, 467(4):979.
4. Parvizi J., Wade F.A., Rapuri V., et al. Revision hip arthroplasty for late instability secondary to polyethylene wear. Clin Orthop Relat Res 2006, 447:66.
5. Fang H.W., Yang C.B., Chang C.H., et al. The potential role of phagocytic capacity in the osteolytic process induced by polyethylene wear particles. J Int Med Res 2006, 34:655.
6. Ingham E., Fisher J. Biological reactions to wear debris in total joint replacement. Proc Inst Mech Eng H 2000, 214:21.
7. Green T.R., Fisher J., Matthews J.B., et al. Effect of size and dose on bone resorption activity of macrophages by in vitro clinically relevant ultra high molecular weight polyethylene particles. J Biomed Mater Res 2000, 53:490.
8. McKellop H., Shen F.W., Lu B., et al. Development of an extremely wear-resistant ultra high molecular weight polyethylene for total hip replacements. J Orthop Res 1999, 17:157.
9. Muratoglu O.K., Bragdon C.R., O'Connor D.O., et al. A novel method of cross-linking ultra-high-molecular-weight polyethylene to improve wear, reduce oxidation, and retain mechanical properties recipient of the 1999 HAP Paul Award. J Arthroplasty 2001, 16:149.
10. Kurtz S.M., Gawel H.A., Patel J.D. History and systematic review of wear and osteolysis for first-generation highly crosslinked polyethylene. Clin Orthop Relat Res 2011, 469:2262.
11. Oral E., Ghali B.W., Muratoglu O.K. The elimination of free radicals in irradiated UHMWPEs with and without vitamin E stabilization by annealing under pressure. J Biomed Mater Res Part B: Appl Biomat 2011, 97B:167.
12. Rajadhyaksha A., Brotea C., Cheung Y., et al. Five-year comparative study of highly cross-linked (Crossfire) and traditional polyethylene. J Arthroplasty 2009, 24:161.
13. Martell J.M., Berdia S. Determination of polyethylene wear in total hip replacements with use of digital radiographs. J Bone Joint Surg 1997, 79-A:1635.
14. Rubash H.E., Sinha R.K., Paprosky W., et al. A new classification system for the management of acetabular osteolysis after total hip arthroplasty. Instr Course Lect 1999, 48:37.
15. Crockarell J.R., Snearly C.M. Accuracy and precision of two computer-assisted methods of radiographic wear measurement in total hip arthroplasty. J Arthroplasty 2012, 27(1):37.
16. Geerdink C.H., Grimm B., Vencken W., et al. The determination of linear and angular penetration of the femoral head into the acetabular component as an assessment of wear in total hip replacement. J Bone Joint Surg 2008, 90-B(7):839.
17. Bankston A.B., Faris P.M., Keating E.M., et al. Polyethylene wear in total hip arthroplasty in patient- matched groups. A comparison of stainless steel, cobalt chrome, and titanium-bearing surfaces. J Arthroplasty 1993, 8:315.
18. DeLee J.G., Charnley J. Radiological demarcation of cemented sockets in total hip replacement. Clin Orthop Relat Res 1976, 121:20.
19. Gruen T.A., McNeice G.M., Amstutz H.C. "Modes of failure" of cemented stem-type femoral components: a radiographic analysis of loosening. Clin Orthop Relat Res 1979, 141:17.
20. Edidin A., Muth J., Spiegelberg S., et al. Sterilization of UHMWPE in nitrogen prevents degradation for more than ten years. Trans Orthop Res Soc 2000, 25:0001.
21. Streicher R.M. Ionizing irradiation for sterilization and modification of high molecular weight polyethylenes. Plast Rubber Proc Appl 1988, 10:221.
22. Capello W., D'Antonio J.A., Ramakrishnan R., et al. Continued improved wear with an annealed highly cross-linked polyethylene. Clin Orthop Relat Res 2011, 469:825.
23. Martell J.M., Verner J.J., Incavo S.J. Clinical performance of a highly cross-linked polyethylene at two years in total hip arthroplasty: a randomized prospective trial. J Arthroplasty 2003, 18(Suppl 1):55.
24. D'Antonio J.A., Manley M.T., Capello W.N., et al. Five-year experience with crossfire highly cross-linked polyethylene. Clin Orthop Relat Res 2005, 441:143.
25. Ranawat A.S., Tsailis P., Meftah M., et al. Minimum 5-year wear analysis of first-generation highly cross-linked polyethylene in patients 65 years and younger. J Arthroplasty 2012, 27(3):354.
26. Sychterz C.J., Engh C.A., Yang A., et al. Analysis of temporal wear patterns of porous-coated acetabular components: distinguishing between true wear and so-called bedding in. J Bone Joint Surg 1999, 81:821.
27. Reynolds S.E., Malkani A.L., Ramakrishnan R., et al. Wear analysis of first-generation highly cross-linked polyethylene in primary total hip arthroplasty: an average 9-year follow-up. J Arthroplasty 2012, 27(6):1064.
28. Rohrl S.M., Li M.G., Nilsson K.G., et al. Very low wear of non-remelted highly cross-linked polyethylene cups: an RSA study lasting up to 6years. Acta Orthop 2007, 78.6:739.
29. Dowd J.E., Sychterz C.J., Young A.M., et al. Characterization of long-term femoral-head-penetration rates. Association with and prediction of osteolysis. J Bone Joint Surg 2000, 82-A:1102.
30. Sochart D. Relationship of acetabular wear to osteolysis around total hip components inserted with and without cement. Clin Orthop Relat Res 1999, 363:135.
31. Callaghan J.J., Albright J.C., Goetz D.D., et al. Charnley total hip arthroplasty with cement: minimum twenty-five year follow-up. J Bone Joint Surg Am 2000, 82:487.
32. Sakalkale D.P., Engh K., Hozack W.J., et al. Minimum 10-year results of a tapered cementless hip replacement. Clin Orthop Relat Res 1999, 362:138.
33. Shih C.H., Lee P.C., Chen J.H., et al. Measurement of polyethylene wear in cementless total hip arthroplasty. J Bone Joint Surg 1997, 79:361.
34. Devane P., Robinson E., Bourne R., et al. Measurement of polyethylene wear in acetabular components inserted with and without cement. J Bone Joint Surg Am 1997, 79:682.
35. Kim Y.H., Kim J.S., Cho S.H. Primary total hip arthroplasty with the AML total hip prosthesis. Clin Orthop Relat Res 1999, 360:147.
36. Barrack R.L., Folgueras A., Munn B., et al. Pelvic lysis and polyethylene wear at 5-8years in an uncemented total hip. Clin Orthop Relat Res 1997, 335:211.
37. Wan Z., Dorr L.D. Natural history of femoral focal osteolysis with proximal ingrowth smooth stem implant. J Arthroplasty 1996, 11:718.
38. Han C.D., Choe W.S., Yoo J.H. Effect of polyethylene wear on osteolysis in cementless primary total hip arthroplasty. J Arthroplasty 1999, 14:714.
39. Maloney W.J., Galante J.O., Anderson M. Fixation, polyethylene wear and pelvic osteolysis in primary total hip replacement. Clin Orthop Relat Res 1999, 369:157.
40. Perez R.E., Rodriguez J.A., Deshmukh R.G., et al. Polyethylene wear and periprosthetic osteolysis in metal-backed acetabular components with cylindrical liners. J Arthroplasty 1998, 13:1.
41. Sychterz C.J., Engh C.A., Young A.M. Comparison of in vivo wear between polyethylene liners articulating with ceramic and cobalt-chrome femoral heads. J Bone Joint Surg 2000, 82:948.
42. Livingston B.J., Chmell M.J., Spector M., et al. Complications of total hip arthroplasty associated with the use of an acetabular component with a Hylamer liner. J Bone Joint Surg Am 1997, 79:1529.
43. Kim Y., Kim J., Cho S. Primary total hip arthroplasty with a cementless porous-coated anatomic total hip prosthesis: 10-12year results of a prospective and consecutive series. J Arthroplasty 1999, 14:538.
44. Graeter J.H., Nevins R. Early osteolysis with Hylamer acetabular liners. J Arthroplasty 1998, 13:464.
45. Nashed R.S., Bechker D.A., Bustilo R.B. Are cementless acetabular components the cause of excess wear and osteolysis in total hip arthroplasty. Clin Orthop Relat Res 1995, 317:19.
46. Kurtz S.M., Austin M.S., Azzam K., et al. Mechanical properties, oxidation, and clinical performance of retrieved highly cross-linked Crossfire liners after intermediate-term implantation. J Arthroplasty 2010, 25:614.