Effects of ultrasonic nanocrystalline surface modification (UNSM) technique on the tribological behavior of sintered Cu-based alloy

Tribology International

Volumn 72, Issue , 2014, Pages 187-197

  Amanov, Auezhan ^a   Pyun, Young Sik ^b   Sasaki, Shinya ^a  

^a TOKYO UNIVERSITY OF SCIENCE   (Japan)

^b SunMoon University   (South Korea)

Author keywords

Cu based alloy; Friction; UNSM; Wear

Indexed keywords

AUTOMOTIVE INDUSTRY; COPPER ALLOYS; FRICTION; INTERNAL COMBUSTION ENGINES; NANOCRYSTALS; POWDER METALLURGY; SINTERING; TRIBOLOGY; ULTRASONIC APPLICATIONS; WEAR OF MATERIALS; WEAR RESISTANCE;

BENEFICIAL EFFECTS; CU BASED ALLOY; FRICTION COEFFICIENTS; NANOCRYSTALLINE SURFACES; POWDER METALLURGY (P/M); RECIPROCATING TRIBOMETER; TRIBOLOGICAL BEHAVIORS; UNSM;

NANOCRYSTALLINE ALLOYS;

EID: 84893798520     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2013.12.003     Document Type: Article

References (41)

1. E.A. Ashour, and B.G. Ateya Electrochemical behavior of a copper-aluminium alloy in concentrated alkaline solutions Electrochim Acta 42 1997 243 250 (Pubitemid 127415190)
2. R. Zengin, and M. Ceylan The changes in transformation temperatures under stress of Cu-12.7Al-5Ni-2Mn alloy Thermochim Acta 414 2004 155 158
3. B. Arifvianto, Suyitno, and M. Mahardika Effects of mechanical attrition treatment (SMAT) on a rough surface of AISI 316L stainless steel Appl Surf Sci 258 2012 4538 4543
4. A. Amanov, R. Tsuboi, H. Oe, and S. Sasaki The influence of bulges produced by laser surface texturing on the sliding friction and wear behavior Tribol Int 60 2013 216 223
5. X.S. Guan, Z.F. Dong, and Y. Li Surface nanocrystallization by sandblasting and annealing for improved mechanical and tribological properties Nanotechnology 16 2005 2963 2971 (Pubitemid 41677060)
6. T. Shi, M. Shao, H. Zhang, Q. Yang, and X. Shen Surface modification of porous poly (tetrafluoroethylene) film via cold plasma treatment Appl Surf. Sci 258 2011 1474 1479
7. S. Bagherifard, R. Ghelichi, and M. Guagliano On the shot peening surface coverage and its assessment by means of finite element simulation: a critical review and some original developments Appl Surf Sci 259 2012 186 194
8. K.Y. Zhu, A. Vassel, F. Brisset, K. Lu, and J. Lu Nanostructure formation mechanism of α-titanium using SMAT Acta Mater 52 2004 4101 4110
9. L. Rapoport, A. Moshkovich, V. Perfilyev, A. Gedanken, Koltypin Yu, and E. Sominski et al. Wear life and adhesion of solid lubricant films on laser-textured steel surfaces Wear 267 2009 1203 1207
10. X.P. Jiang, X.Y. Wang, J.X. Li, D.Y. Li, C.S. Man, and M.J. Shepard et al. Enhancement of fatigue and corrosion properties of pure Ti by sandblasting Mater Sci Eng A 429 2006 30 35 (Pubitemid 44081103)
11. M.O.H. Cioffi, H.J.C. Voorwald, L.R.O. Hein, and L. Ambrosio Effects of cold plasma treatment on the mechanical properties of PET/PMMA composites Compos Part A: Appl Sci Manuf 36 2005 615 623 (Pubitemid 40244972)
12. K. Zhan, C.H. Jiang, and V. Ji Effects of prestress state on surface layer characteristic of S30432 austenitic steel in shot peening process Mater Des 42 2012 89 93
13. A. Amanov, I.S. Cho, Y.S. Pyun, C.S. Lee, and I.G. Park Micro-dimpled surface by ultrasonic nanocrystal surface modification and its tribological effects Wear 286-287 2012 136 144
14. A. Amanov, O.V. Penkov, Y.S. Pyun, and D.E. Kim Effects of ultrasonic nanocrystalline surface modification on the tribological properties of AZ91D magnesium alloy Tribol Int 54 2012 106 113
15. A. Amanov, I.S. Cho, and D.E. Kim Effectiveness of high-frequency ultrasonic peening treatment on the tribological characteristics of Cu-based sintered materials on steel substrate Mater Des. 45 2013 118 124
16. A. Amanov, S. Sasaki, I.S. Cho, Y. Suzuki, H.J. Kim, and D.E. Kim An investigation of the tribological and nano-scratch behaviors of Fe-Ni-Cr alloy sintered direct metal laser sintering Mater Des. 47 2013 386 394
17. W.C. Oliver, and G.M. Pharr An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments J Mater Res 7 1992 1564 1583
18. Bertilsson I, Karlsson B, Wasen J. Proceedings of international conference on MPIF/APMI, vol. 16. Princeton, NJ; 1984. p. 19-32.
19. N. Hansen Hall-Petch relation and boundary strenghtening Scr Mater 51 2004 801 806
20. H. Du, Y. Wei, W. Lin, L. Hou, Z. Liu, and Y. An et al. One way of surface alloying treatment on iron surface based on surface mechanical attrition treatment and heat treatment Appl Surf Sci 255 2009 8660 8666
21. A.B. Naizabekov, V.A. Andreyachshenko, and R. Kocich Study of deformation behavior, structure and mechanical properties of the AlSiMnFe alloy during ECAP-PBP Micron 44 2013 210 217
22. H. Chen, Y. Zhang, and C. Ding Tribological properties of nanostructured zirconia coatings deposited by plasma spraying Wear 253 2002 885 893 (Pubitemid 35280931)
23. T.E. Karakasidis, C.A. Charitidis, D. Skarakis, and F. Chouliaras Elastic properties of nanostructured materials with layered grain boundary structure Surf Sci 601 2007 3521 3527 (Pubitemid 47212288)
24. S. Jana, R.S. Mishra, J.A. Baumann, and G.J. Grant Effects of friction stir processing on microstructure and tensile properties of an investment cast Al-7Si-0.6Mg alloy Metall Mater Trans A Phys Metall Mater Sci 41A 2010 2507 2521
25. B.D. Cullity, and S.R. Stock Elements of X-ray diffraction 2001 Prentice Hall Upper Saddle River, NJ
26. G. Sheng Investigation of surface self-nanocrystallization in 0Cr18Ni9Ti induced by surface mechanical attrition treatment ISRN Nanotechnol 2011 2011 583215 583223
27. X. Wu, N. Tao, Y. Hong, B. Xu, J. Lu, and K. Lu Microstructure and evolution of mechanically-induced ultrafine grain in surface layer of Al-alloy subjected to USSP Acta Mater 50 2002 2075 2084 (Pubitemid 34524220)
28. M. Sato, N. Tsuji, Y. Minamino, and Y. Koizumi Formation of nanocrystalline surface layers in various metallic materials by near surface severe plastic deformation Sci Technol Adv Mater 5 2004 145 152
29. Y. Zhang, N.R. Tao, and K. Lu Mechanical properties and rolling behaviors of nano-grained copper with embedded nano-twin bundles Acta Mater 56 2008 2429 2440
30. B. Bhushan, and X. Li Nanomechanical characterisation of solid surface and thin films Int Mater Rev 48 3 2003 125 164
31. C. Alberto, and P. Simone A fractal approach to indentation size effect Eng Fract Mech 73 2006 2110 2122
32. 3/SiC composites Compos Sci Technol 67 2007 3121 3129 (Pubitemid 47560014)
33. L. Klinger, and E. Rabkin Theory of nanoindentation creep controlled by interfacial diffusion Scr Mater 48 2003 1475 1481
34. T.Y. Zhang, W.H. Xu, and M.H. Zhao The role of plastic deformation of rough surfaces in the size-dependent hardness Acta Mater 52 2004 57 68
35. W.G. Jiang, J.J. Su, and X.Q. Feng Effect of surface roughness on the nanoindentation test of thin films Eng Fract Mech 75 2008 4965 4972
36. Y. Tamura, A. Yokoyama, F. Watari, M. Uo, and T. Kawasaki Mechanical properties of surface nitrided titanium for abrasion resistant implant materials Mater Trans 43 12 2002 3043 3051
37. N.P. Suh Tribophysics 1996 Englewood Cliffs, Prentice-Hall NJ
38. S. Equey, A. Houriet, and S. Mischler Wear and frictional mechanisms of copper-based bearing alloys Wear 273 2011 9 16
39. B. Yao, Z. Han, and K. Lu Impurity effect on wear resistance of ultrafine-grained copper J Mater Sci Technol 28 6 2012 481 487
40. G.W. Stachowiak, and A.W. Batchelor Engineering tribology 1993 Elsevier Amsterdam
41. S. Suzuki, Y. Ishikawa, M. Isshiki, and Y. Waseda Native oxide layers formed on the surface of ultra high-purity iron and copper investigated by angle resolved XPS Mater Trans JIM 38 1997 1004 1009 (Pubitemid 127761730)