Fabrication of multi-walled carbon nanotube-carbon fiber hybrid material via electrophoretic deposition followed by pyrolysis process

Composites Part A: Applied Science and Manufacturing

Volumn 60, Issue , 2014, Pages 8-14

  Moaseri, Ehsan ^a   Karimi, Majid ^b   Maghrebi, Morteza ^a   Baniadam, Majid ^a  

^a FERDOWSI UNIVERSITY OF MASHHAD   (Iran)

^b QUCHAN UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

A. Carbon fiber; A. Carbon carbon composites (CCCs); B. Mechanical properties; E. Heat treatment

Indexed keywords

E. HEAT TREATMENT; ELECTROPHORETIC DEPOSITIONS; EPOXY MATRICES; NITROGEN ATMOSPHERES; PETROLEUM PITCH; PROPERTIES OF COMPOSITES; PYROLYSIS PROCESS;

CARBON CARBON COMPOSITES; CARBON FIBERS; ELECTROPHORESIS; FRACTURE MECHANICS; HYBRID MATERIALS; MECHANICAL PROPERTIES; MULTIWALLED CARBON NANOTUBES (MWCN); TENSILE STRENGTH;

DEPOSITION;

EID: 84893770036     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2014.01.009     Document Type: Article

References (27)

1. S. Chand Carbon fibers for composites J Mater Sci Lett 35 6 2000 1303 1313 (Pubitemid 30560979)
2. M.A. Montes-Morán, and R.J. Young Raman spectroscopy study of HM carbon fibres: effect of plasma treatment on the interfacial properties of single fibre/epoxy composites. Part I: Fibre characterisation Carbon 40 6 2002 845 855 (Pubitemid 34284452)
3. F. Zhao, and Y. Huang Grafting of polyhedral oligomeric silsesquioxanes on a carbon fiber surface: novel coupling agents for fiber/polymer matrix composites J Mater Chem 21 11 2011 3695 3703
4. H. Bubert, X. Ai, S. Haiber, M. Heintze, V. Brüser, and E. Pasch et al. Basic analytical investigation of plasma-chemically modified carbon fibers Spectrochim Acta Part B 57 10 2002 1601 1610 (Pubitemid 35214515)
5. Mittal KL. Polymer Surface Modification: Relevance to Adhesion: VSP; 2000.
6. M. Li, Y. Gu, Y. Liu, Y. Li, and Z. Zhang Interfacial improvement of carbon fiber/epoxy composites using a simple process for depositing commercially functionalized carbon nanotubes on the fibers Carbon 52 2013 109 121
7. J. Hu, S. Dong, B. Wu, X. Zhang, H. Zhou, and Z. Wang et al. Tailoring carbon fiber/carbon nanotubes interface to optimize mechanical properties of Cf-CNTs/SiC composites Int J Appl Ceram Technol 2013
8. M. Al-Haik, C.C. Luhrs, M.M. Reda Taha, A.K. Roy, L. Dai, and J. Phillips et al. Hybrid carbon fibers/carbon nanotubes structures for next generation polymeric composites J Nanotechnol 2010
9. H. Qian, A. Bismarck, E.S. Greenhalgh, and M.S.P. Shaffer Carbon nanotube grafted carbon fibres: a study of wetting and fibre fragmentation Composites Part A 41 9 2010 1107 1114
10. P. Lv, Y.-y. Feng, P. Zhang, H.-m. Chen, N. Zhao, and W. Feng Increasing the interfacial strength in carbon fiber/epoxy composites by controlling the orientation and length of carbon nanotubes grown on the fibers Carbon 49 14 2011 4665 4673
11. F. Zhao, Y. Huang, L. Liu, Y. Bai, and L. Xu Formation of a carbon fiber/polyhedral oligomeric silsesquioxane/carbon nanotube hybrid reinforcement and its effect on the interfacial properties of carbon fiber/epoxy composites Carbon 49 8 2011 2624 2632
12. F.-H. Zhang, R.-G. Wang, X.-D. He, C. Wang, and L.-N. Ren Interfacial shearing strength and reinforcing mechanisms of an epoxy composite reinforced using a carbon nanotube/carbon fiber hybrid J Mater Sci 44 13 2009 3574 3577
13. S.P. Sharma, and S.C. Lakkad Effect of CNTs growth on carbon fibers on the tensile strength of CNTs grown carbon fiber-reinforced polymer matrix composites Composites Part A 42 1 2011 8 15
14. R.J. Sager, P.J. Klein, D.C. Lagoudas, Q. Zhang, J. Liu, and L. Dai et al. Effect of carbon nanotubes on the interfacial shear strength of T650 carbon fiber in an epoxy matrix Compos Sci Technol 69 7-8 2009 898 904
15. J. Guo, C. Lu, and F. An Effect of electrophoretically deposited carbon nanotubes on the interface of carbon fiber reinforced epoxy composite J Mater Sci 47 6 2012 2831 2836
16. J. Guo, C. Lu, F. An, and S. He Preparation and characterization of carbon nanotubes/carbon fiber hybrid material by ultrasonically assisted electrophoretic deposition Mater Lett 66 1 2012 382 384
17. Q. An, A.N. Rider, and E.T. Thostenson Electrophoretic deposition of carbon nanotubes onto carbon-fiber fabric for production of carbon/epoxy composites with improved mechanical properties Carbon 50 11 2012 4130 4143
18. A. Laachachi, A. Vivet, G. Nouet, B. Ben Doudou, C. Poilâne, and J. Chen et al. A chemical method to graft carbon nanotubes onto a carbon fiber Mater Lett 62 3 2008 394 397 (Pubitemid 350166597)
19. L. Mei, X. He, Y. Li, R. Wang, C. Wang, and Q. Peng Grafting carbon nanotubes onto carbon fiber by use of dendrimers Mater Lett 64 22 2010 2505 2508
20. ASTM D 638-03. Standard test method for tensile properties of plastics.
21. R.N. Wenzel Resistance of solid surfaces to wetting by water Ind Eng Chem Res 28 8 1936 988 994
22. H. Rong, K.-H. Dahmen, H. Garmestani, M. Yu, and K. Jacob Comparison of chemical vapor deposition and chemical grafting for improving the mechanical properties of carbon fiber/epoxy composites with multi-wall carbon nanotubes J Mater Sci 48 14 2013 4834 4842
23. C. Grimmer, and C.K.H. Dharan High-cycle fatigue of hybrid carbon nanotube/glass fiber/polymer composites J Mater Sci 43 13 2008 4487 4492
24. E. Daguerre, A. Guillot, and F. Stoeckli Activated carbons prepared from thermally and chemically treated petroleum and coal tar pitches Carbon 39 8 2001 1279 1285 (Pubitemid 32427168)
25. M. Perez, M. Granda, R. Garcia, R. Santamaria, E. Romero, and R. Menendez Pyrolysis behaviour of petroleum pitches prepared at different conditions J Anal Appl Pyrolysis 63 2 2002 223 239 (Pubitemid 34201026)
26. J. Alcañiz-Monge, J.P. Marco-Lozar, and D. Lozano-Castelló Monolithic carbon molecular sieves from activated bituminous coal impregnated with a slurry of coal tar pitch Fuel Process Technol 95 2012 67 72
27. J.G. Speight The chemistry and technology of coal 2012 CRC Press