Space-holder effect on designing pore structure and determining mechanical properties in porous titanium

Materials and Design

Volumn 57, Issue , 2014, Pages 712-718

  Lee, Byounggab ^a   Lee, Taekyung ^a   Lee, Yongmoon ^a   Lee, Dong Jun ^a   Jeong, Jiwon ^a   Yuh, Junhan ^b   Oh, Sang Ho ^a   Kim, Hyoung Seop ^a   Lee, Chong Soo ^a  

^a Pohang University of Science and Technology (POSTECH)   (South Korea)

^b POSCO   (South Korea)

Author keywords

3D computed tomography; Compression; Finite element method; Powder metallurgy; Space holder; Titanium

Indexed keywords

COMPACTION; COMPUTERIZED TOMOGRAPHY; FINITE ELEMENT METHOD; MECHANICAL PROPERTIES; MORPHOLOGY; POROSITY; POWDER METALLURGY; SODIUM CHLORIDE; TITANIUM; UREA;

3D COMPUTED TOMOGRAPHIES; DIFFERENT SIZES; MICRO-STRUCTURAL OBSERVATIONS; POROUS TITANIUM; SPACE HOLDERS;

PORE STRUCTURE;

EID: 84893750129     PISSN: 02613069     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2013.12.078     Document Type: Article

References (32)

1. Boyer R.R. An overview on the use of titanium in the aerospace industry. Mater Sci Eng A 1996, 213:103-114.
2. Lee T., Kim J.H., Semiatin S.L., Lee C.S. Internal-variable analysis of high-temperature deformation behavior of Ti-6Al-4V: a comparative study of the strain-rate-jump and load-relaxation tests. Mater Sci Eng A 2013, 562:180-189.
3. Ahn K., Huh H., Yoon J. Strain hardening model of pure titanium considering effects of deformation twinning. Met Mater Int 2013, 19:749-758.
4. Popa M., Vasilescu E., Drob P., Raducanu D., Moreno J., Ivanescu S., et al. Microstructure, mechanical, and anticorrosive properties of a new Ti-20Nb-10Zr-5Ta alloy based on nontoxic and nonallergenic elements. Met Mater Int 2012, 18:639-645.
5. Yoo G.Y., Park C.H., Hong J.K., Kim S.E., Kang N.H., Yeom J.T. Effect of beta stabilizer content on young's moduli of titanium alloys with similar electronic states. Korean J Met Mater 2013, 51:307-315.
6. Son B.H., Hong J.G., Hyun Y.T., Bae S.C., Kim S.E. A study on pore structure and mechanical properties of porous titanium fabricated by three-dimensional layer manufacturing process. Korean J Met Mater 2012, 50:100-106.
7. Niinomi M. Recent metallic materials for biomedical applications. Metall Mater Trans A 2002, 33:477-486.
8. Long M., Rack H.J. Titanium alloys in total joint replacement - a materials science perspective. Biomaterials 1998, 19:1621-1639.
9. Lee T., Heo Y.-U., Lee C.S. Microstructure tailoring to enhance strength and ductility in Ti-13Nb-13Zr for biomedical applications. Scr Mater 2013, 69:785-788.
10. Sumner D.R., Turner T.M., Igloria R., Urban R.M., Galante J.O. Functional adaptation and ingrowth of bone vary as a function of hip implant stiffness. J Biomech 1998, 31:909-917.
11. Weinans H., Sumner **R.D., Igloria R., Natarajan R.N. Sensitivity of periprosthetic stress-shielding to load and the bone density-modulus relationship in subject-specific finite element models. J Biomech 2000, 33:809-817.
12. Oh I.-H., Nomura N., Masahashi N., Hanada S. Mechanical properties of porous titanium compacts prepared by powder sintering. Scr Mater 2003, 49:1197-1202.
13. Taddei E.B., Henriques V.A.R., Silva C.R.M., Cairo C.A.A. Production of new titanium alloy for orthopedic implants. Mater Sci Eng C 2004, 24:683-687.
14. Clemow A.J.T., Weinstein A.M., Klawitter J.J., Koeneman J., Anderson J. Interface mechanics of porous titanium implants. J Biomed Mater Res 1981, 15:73-82.
15. Tsuruga E., Takita H., Itoh H., Wakisaka Y., Kuboki Y. Pore size of porous hydroxyapatite as the cell-substratum controls BMP-induced osteogenesis. J Biochem 1997, 121:317-324.
16. Dunand D.C. Processing of titanium foams. Adv Eng Mater 2004, 6:369-376.
17. Zhao Y.Y., Sun D.X. A novel sintering-dissolution process for manufacturing Al foams. Scr Mater 2001, 44:105-110.
18. Wen C.E., Mabuchi M., Yamada Y., Shimojima K., Chino Y., Asahina T. Processing of biocompatible porous Ti and Mg. Scr Mater 2001, 45:1147-1153.
19. Bansiddhi A., Dunand D.C. Shape-memory NiTi foams produced by solid-state replication with NaF. Intermetallics 2007, 15:1612-1622.
20. Jha N., Mondal D.P., Dutta Majumdar J., Badkul A., Jha A.K., Khare A.K. Highly porous open cell Ti-foam using NaCl as temporary space holder through powder metallurgy route. Mater Des 2013, 47:810-819.
21. Mansourighasri A., Muhamad N., Sulong A.B. Processing titanium foams using tapioca starch as a space holder. J Mater Process Technol 2012, 212:83-89.
22. Aydoǧmuş T., Bor Ş. Processing of porous TiNi alloys using magnesium as space holder. J Alloys Comp 2009, 478:705-710.
23. Joo S.-H., Lee J.K., Koo J.-M., Lee S., Suh D.-W., Kim H.S. Method for measuring nanoscale local strain in a dual phase steel using digital image correlation with nanodot patterns. Scr Mater 2013, 68:245-248.
24. Lee D.J., Ahn D.-H., Yoon E.Y., Hong S.I., Lee S., Kim H.S. Estimating interface bonding strength in clad metals using digital image correlation. Scr Mater 2013, 68:893-896.
25. Lee T., Park C.H., Lee D.-L., Lee C.S. Enhancing tensile properties of ultrafine-grained medium-carbon steel utilizing fine carbides. Mater Sci Eng A 2011, 528:6558-6564.
26. Niu W., Bai C., Qiu G., Wang Q. Processing and properties of porous titanium using space holder technique. Mater Sci Eng A 2009, 506:148-151.
27. Esen Z., Bor Ş. Processing of titanium foams using magnesium spacer particles. Scr Mater 2007, 56:341-344.
28. Cocks A.C.F. Constitutive modelling of powder compaction and sintering. Prog Mater Sci 2001, 46:201-229.
29. Zhu J.H., Liaw P.K., Corum J.M., McCoy H.E. High-temperature mechanical behavior of Ti-6Al-4V alloy and TiC p /Ti-6Al-4V composite. Metall Mater Trans A 1999, 30:1569-1578.
30. Yoshida K., Mishina H., Sasaki S., Morita M., Mabuchi K. Mechanical properties of titanium cermets for joint prostheses. Mater Trans 2006, 47:418-425.
31. Gibson L.J., Ashby M.F. Cellular solids: structure and properties 1999, Cambridge University Press.
32. Niinomi M. Mechanical properties of biomedical titanium alloys. Mater Sci Eng A 1998, 243:231-236.