Dependence of the Pukánszky's interaction parameter B on the interface shear strength (IFSS) of nanofiller- and short fiber-reinforced polymer composites

Composites Science and Technology

Volumn 93, Issue , 2014, Pages 106-113

  Lazzeri, Andrea ^a   Phuong, Vu Thanh ^a  

^a UNIVERSITY OF PISA   (Italy)

Author keywords

A. Carbon nanotubes; A. Nano composites; A. Short fiber composites; B. Interfacial strength; B. Mechanical properties modeling

Indexed keywords

CRITICAL VOLUME FRACTIONS; FIBER REINFORCED POLYMER COMPOSITES; INTERACTION PARAMETERS; INTERFACE SHEAR STRENGTH; INTERFACIAL SHEAR STRENGTH; INTERFACIAL STRENGTH; MECHANICAL PROPERTIES MODELING; SHORT FIBER COMPOSITES;

ASPECT RATIO; CARBON NANOTUBES; FIBERS; FILLERS; MECHANICAL PROPERTIES; NANOCOMPOSITES; REINFORCEMENT; TENSILE STRENGTH;

REINFORCED PLASTICS;

EID: 84893403290     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2014.01.002     Document Type: Article

References (56)

1. Dai G., Mishnaevsky L. Damage evolution in nanoclay-reinforced polymers: a three-dimensional computational study. Comp Sci Tech 2013, 74:67-77.
2. Scocchi G., Posocco P., Danani A., Pricl S., Fermeglia M. To the nanoscale, and beyond! Multiscale molecular modeling of polymer-clay nanocomposites. Fluid Phase Equilibr 2007, 261:366-374.
3. Silani M., Ziaei-Rad S., Esfahanian M., Tan V.B.C. On the experimental and numerical investigation of clay/epoxy nanocomposites. Comp Struct 2012, 94:3142-3148.
4. Li Y., Waas A.M., Arruda E.M. A closed-form, hierarchical, multiinterphase model for composites-derivation, verification and application to nanocomposites. J Mech Phys Sol 2011, 59:43-63.
5. Chen Y., Chia J.Y.H., Su Z.C., Tay T.E., Tan V.B.C. Mechanical characterization of interfaces in epoxy-clay nanocomposites by molecular simulations. Polymer 2013, 54:766-773.
6. Lauke B. Determination of adhesion strength between a coated particle and polymer matrix. Compos Sci Technol 2006, 66:3153-3160.
7. Zappalorto M., Salviato M., Quaresimin M. Influence of the interphase zone on the nanoparticle debonding stress. Compos Sci Technol 2011, 72:49-55.
8. Sevostianov I., Kachanov M. Effect of interphase layers on the overall elastic and conductive properties of matrix composites. Applications to nanosize inclusion. Int J Solids Struct 2007, 44:1304-1315.
9. Sevostianov I. Dependence of the effective thermal pressure coefficient of a particulate composite on particles size. Int J Fract 2007, 145:333-340.
10. Odegard G.M., Clancy T.C., Gates T.S. Modeling of mechanical properties of nanoparticle/polymer composites. Polymer 2005, 46:553-562.
11. Yu S., Yang S., Cho M. Multi-scale modeling of cross-linked epoxy nanocomposites. Polymer 2009, 50:945-952.
12. Patel R.K., Bhattacharya B., Sumit Basu Effect of interphase properties on the damping response of polymer nano-composites. Mech Res Com 2008, 35:115-125.
13. Hull D., Clyne T.W. An introduction to composite materials 1996, Cambridge University Press, Cambridge. 2nd ed.
14. Matthews F.L., Rawlings R.D. Composite Materials: Engineering and Science 1999, CRC Press, Boca Raton.
15. Krenchel H. Fiber Reinforcement 1964, Akademisk Forlag, Copenhagen.
16. Kelly A., Tyson W.R. Tensile properties of fiber-reinforced metals: copper/tungsten and copper/molybdenum. J Mech Phys Solids 1965, 13:329-350.
17. Piggott M.R. Short fiber polymer composites: a fracture-based theory of fiber reinforcement. J Compos Mater 1994, 28:588-606.
18. Fu S.Y., Lauke B. Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers. Compos Sci Technol 1996, 56:1179-1190.
19. Bowyer W.H., Bader M.G. On the reinforcement of thermoplastics by perfectly aligned discontinuous fibers. J Mater Sci 1972, 7:1315-1321.
20. Bader M.G., Bowyer W.H. An improved method of production for high strength fiber-reinforced thermoplastics. Composites 1973, 4:150-156.
21. Thomason J.L. Interfacial strength in thermoplastic composites - at last an industry friendly measurement method?. Compos Part A - Appl S 2002, 33:1283-1288.
22. Pukánszky B. Influence of interface interaction on the ultimate tensile properties of polymer composites. Composites 1990, 21:255-262.
23. Bilotti E., Zhang R., Deng H., Quero F., Fischer H.R., Peijsa T. Sepiolite needle-like clay for PA6 nanocomposites: an alternative to layered silicates?. Compos Sci Technol 2009, 69:2587-2595.
24. Renner K., Kenyó C., Móczó J., Pukànszky B. Micromechanical deformation processes in PP/wood composites: particle characteristics, adhesion, mechanisms. Compos Part A - Appl S 2010, 41:1653-1661.
25. Satapathy B.K., Ganß M., Pötscke P., Weidisch R. Stress transfer and fracture mechanisms in carbon nanotube-reinforced polymer nanocomposites. Optimization of polymer nanocomposite properties 2010, Wiley-VCH Verlag, Weinheim, [chapter 7]. V. Vikas Mittal (Ed.).
26. Voros G., Fekete E., Pukànszky B. An interphase with changing properties and the mechanism of deformation in particulate-filled polymers. J Adhesion 1997, 64:229-250.
27. Shen L., Li J. Effective elastic moduli of composites reinforced by particle or fiber with an inhomogeneous interphase. Int J Solids Struct 2003, 40:1393-1409.
28. Cioni B., Lazzeri A. The role of interfacial interactions in the toughening of precipitated calcium carbonate-polypropylene nanocomposites. Compos Interface 2012, 17:533-549.
29. Boutaleb S., Zaïri F., Mesbah A., Naït-Abdelaziz M., Gloaguen J.M., Boukharouba T., et al. Micromechanics-based modeling of stiffness and yield stress for silica/polymer nanocomposites. Int J Solids Struct 2009, 46:1716-1726.
30. Fukuda H., Chou T.-W.A. Probabilistic theory of the strength of short-fiber composites with variable fiber length and orientation. J Mat Sci 1982, 17:1003-1011.
31. Jayaraman K., Kortschot M.T. Correction to the Fukuda-Kawata Young's modulus theory and the Fukuda-Chou strength theory for short fiber-reinforced composite materials. J Mater Sci 1996, 31:2059-2064.
32. Andersons J., Sparniņš E., Joffe R. Stiffness and strength of flax fiber/polymer matrix composites. Polym Compos 2006, 27:221-229.
33. Kelly A., Davies G.J. The principles of the fiber reinforcement of metals. Int Mater Rev 1965, 10:1-77.
34. Andrews R., Weisenberger M.C. Carbon nanotube polymer composites. Cur Opin Solid St Mi 2004, 8:31-37.
35. Nakamura R, Netravali AN. Hosur MV. Effect of halloysite nanotubes on tensile properties and interfacial property between carbon fiber and epoxy resin. Edinburgh, Scotland: 18th International Conference on Composite Materials (ICCM18). July 27th - July 31st; 2009.
36. Bilotti E. Polymer/Sepiolite clay nanocomposites. PhD Thesis. University of London; 2009.
37. Fornes T.D., Yoon P.J., Keskkula H., Paul D.R. Nylon 6 nanocomposites: the effect of matrix molecular weight. Polymer 2001, 42:9929-9940.
38. Fornes T.D., Hunter D.L., Paul D.R. Effect of sodium montmorillonite source on nylon 6/clay nanocomposites. Polymer 2004, 45:2321-2331.
39. Pitsa D., Danikas M.G. Interfaces features in polymer nanocomposites: a review of proposed models. Nano 2011, 6:497-508.
40. Chen B., Evans J.R.G. Elastic moduli of clay platelets. Scripta Mater 2006, 54:1581-1585.
41. Bunsell A.R., Berger M.-H. Ceramic fibers. High-performance fibers 2000, CRC Press, Boca Raton FL, [chapter 7]. J.W.S. Hearle (Ed.).
42. Luo J.J., Daniel I.M. Characterization and modeling of mechanical behavior of polymer/clay nanocomposites. Compos Sci Technol 2003, 63:1607-1616.
43. Százdi L., Pozsgay A., Pukánszky B. Factors and processes influencing the reinforcing effect of layered silicates in polymer nanocomposites. Eur Polym J 2007, 43:345-359.
44. Fornes T.D., Paul D.R. Modeling properties pf nylon 6/clay nanocomposites using composite theories. Polymer 2003, 44:4993-5013.
45. Forental G.A., Sapozhnikov S.B. Numerical-experimental estimation of the mechanical properties of an epoxy nanocomposite. Mech Comp Mat 2011, 47:521-528.
46. Ganß M., Satapathy B.K., Thunga M., Weidisch R., Pötschke P., Jehnichen D. Structural interpretations of deformation and fracture behavior of polypropylene/multi-walled carbon nanotube composites. Acta Mater 2008, 56:2247-2261.
47. Yazdchi K., Salehi M. The effects of CNT waviness on interfacial stress transfer characteristics of CNT/polymer composites. Compos Part A - Appl S 2011, 42:1301-1309.
48. Pan Z.W., Xie S.S., Lu L., Chang B.H., Sun L.F., Zhou W.Y., et al. Tensile tests of ropes of very long aligned multiwall carbon nanotubes. Appl Phys Lett 1999, 74:3152-3154.
49. Méndez J.A., Vilaseca F., Pèlach M.A., López J.P., Barberà L., Turon X., et al. Evaluation of the reinforcing effect of ground wood pulp in the preparation of polypropylene-based composites coupled with maleic anhydride grafted polypropylene. J Appl Polym Sci 2007, 105:3588-3596.
50. El Mansouri N.E., Espinach F.X., Julian F., Verdaguer N., Torres L., Llop M.F., et al. Research on the suitability of organosolv semi-chemical triticale fibers as reinforcement for recycled HDPE composites. Biores 2012, 7:5032-5047.
51. Vilaseca F., Valadez-Gonzalez A., Herrera-Franco P.J., Pèlach MÀ, López J.P., Mutjé P. Biocomposites from abaca strands and polypropylene. Part I: Evaluation of the tensile properties. Bioresource Tech 2010, 101:387-395.
52. Vallejosa M.E., Espinach F.X., Julián F., Torrese Ll, Vilaseca F., Mutjé P. Micromechanics of hemp strands in polypropylene composites. Compos Sci Tech 2012, 72:1209-1213.
53. Venkateshwaran N., ElayaPerumal A. Modeling and evaluation of tensile properties of randomly oriented banana/epoxy composite. J Reint Plast Comp 2011, 30:1957-1967.
54. Rodriguez M., Rodriguez A., Bayer R.J., Vilaseca F., Girones J., Mutje P. Determination of corn stalk fibers' strength through modeling of the mechanical properties of its composites. Biores 2010, 5:2535-2546.
55. Di Landro L., Di Benedetto A.T., Groeger J. The effect of fiber-matrix stress transfer on the strength of fiber-reinforced composite materials. Polym Compos 1988, 9:209-222.
56. Pegoretti A., Della Volpe C., Detassis M., Migliaresi C. Thermomechanical behaviour of interfacial region in carbon fiber/epoxy composites. Compos Part A - Appl S 1996, 27A:1067-1074.