Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering

Composites Part B: Engineering

Volumn 60, Issue , 2014, Pages 111-118

  Bastwros, Mina ^a   Kim, Gap Yong ^a   Zhu, Can ^a   Zhang, Kun ^b   Wang, Shiren ^b   Tang, Xiaoduan ^a   Wang, Xinwei ^a  

^a Iowa State University of Science and Technology   (United States)

^b Department of Electrical and Computer Engineering   (United States)

Author keywords

A. Metal matrix composites (MMCs); A. Particle reinforcement; B. Microstructures; E. Sintering

Indexed keywords

ALUMINUM ALLOYS; GRAPHENE; METALLIC MATRIX COMPOSITES; MILLING (MACHINING); POWDER METALS; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; SINTERING;

A. METAL-MATRIX COMPOSITES (MMCS); E. SINTERING; FRACTURE SURFACES; GRAPHENE DISPERSIONS; MILLING TECHNIQUE; PARTICLE REINFORCEMENT; REINFORCED ALUMINUM; THREE-POINT BENDING TEST;

BALL MILLING;

EID: 84892743873     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2013.12.043     Document Type: Article

References (46)

1. Z.M. Gasem Fatigue crack growth behavior in powder-metallurgy 6061 aluminum alloy reinforced with submicron Al2O3 particulates Compos B Eng 43 8 2012 3020 3025
2. L. Dyachkova, and E.E. Feldshtein On the properties of composites based on sintered bronze with alumina additives Compos B Eng 45 1 2013 239 247
3. N. Chawla, and K.K. Chawla Metal matrix composites 2006 Springer Science
4. W. Callistar Materials science and engineering 2007 John Wiley & Sons
5. R. George, K.T. Kashyap, R. Rahul, and S. Yamdagni Strengthening in carbon nanotube/aluminium (CNT/Al) composites Scripta Mater 53 10 2005 1159 1163
6. A.M.K. Esawi, K. Morsi, A. Sayed, M. Taher, and S. Lanka Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites Compos Sci Technol 70 16 2010 2237 2241
7. S.F. Bartolucci, J. Paras, M.A. Rafiee, J. Rafiee, S. Lee, and D. Kapoor et al. Graphene-aluminum nanocomposites Mater Sci Eng A 528 27 2011 7933 7937
8. D.H. Nam, Y.K. Kim, S.I. Cha, and S.H. Hong Effect of CNTs on precipitation hardening behavior of CNT/Al-Cu composites Carbon 50 13 2012 4809 4814
9. S. Gopalakrishnan, and N. Murugan Production and wear characterisation of AA 6061 matrix titanium carbide particulate reinforced composite by enhanced stir casting method Compos B Eng 43 2 2012 302 308
10. A. Baradeswaran, and A. Elaya Perumal Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites Compos B Eng 56 2014 464 471
11. B. Peng, M. Locascio, P. Zapol, S. Li, S.L. Mielke, and G.C. Schatz et al. Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements Nat Nanotechnol 3 10 2008 626
12. F. Gardea, and D.C. Lagoudas Characterization of electrical and thermal properties of carbon nanotube/epoxy composites Compos Part B Eng 56 2014 611 620
13. J.K. Chen, and I.S. Huang Thermal properties of aluminum-graphite composites by powder metallurgy Compos B Eng 44 1 2013 698 703
14. C. Balázsi, B. Fényi, N. Hegman, Z. Kövér, F. Wéber, and Z. Vértesy et al. Development of CNT/Si3N4 composites with improved mechanical and electrical properties Compos B Eng 37 6 2006 418 424
15. M.M.H. Bastwros, A.M.K. Esawi, and A. Wifi Friction and wear behavior of Al-CNT composites Wear 307 1-2 2013 164 173
16. A. Baradeswaran, and A.E. Perumal Wear and mechanical characteristics of Al 7075/graphite composites Compos B Eng 56 2014 472 476
17. R. Pérez-Bustamante, F. Pérez-Bustamante, I. Estrada-Guel, L. Licea-Jiménez, M. Miki-Yoshida, and R. Martínez-Sánchez Effect of milling time and CNT concentration on hardness of CNT/Al2024 composites produced by mechanical alloying Mater Charact 2013
18. D.K. Lim, T. Shibayanagi, and A.P. Gerlich Synthesis of multi-walled CNT reinforced aluminium alloy composite via friction stir processing Mater Sci Eng A 507 1-2 2009 194 199
19. J. Liao, and M.-J. Tan Mixing of carbon nanotubes (CNTs) and aluminum powder for powder metallurgy use Powder Technol 208 1 2011 42 48
20. D. Lahiri, S.R. Bakshi, A.K. Keshri, Y. Liu, and A. Agarwal Dual strengthening mechanisms induced by carbon nanotubes in roll bonded aluminum composites Mater Sci Eng A 523 1-2 2009 263 270
21. Y. Wu, and G.-Y. Kim Carbon nanotube reinforced aluminum composite fabricated by semi-solid powder processing J Mater Process Technol 211 8 2011 1341 1347
22. Y. Jang, S. Kim, S. Lee, D. Kim, and M. Um Fabrication of carbon nano-sized fiber reinforced copper composite using liquid infiltration process Compos Sci Technol 65 5 2005 781 784
23. S. Cho, K. Takagi, H. Kwon, D. Seo, K. Ogawa, and K. Kikuchi et al. Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process Surf Coat Technol 206 16 2012 3488 3494
24. A. Esawi, and K. Morsi Dispersion of carbon nanotubes (CNTs) in aluminum powder Compos A Appl Sci Manuf 38 2 2007 646 650
25. A.M.K. Esawi, K. Morsi, A. Sayed, M. Taher, and S. Lanka The influence of carbon nanotube (CNT) morphology and diameter on the processing and properties of CNT-reinforced aluminium composites Compos A Appl Sci Manuf 42 3 2011 234 243
26. K. Morsi, A.M.K. Esawi, P. Borah, S. Lanka, A. Sayed, and M. Taher Properties of single and dual matrix aluminum-carbon nanotube composites processed via spark plasma extrusion (SPE) Mater Sci Eng A 527 21-22 2010 5686 5690
27. S.B. Lee, K. Matsunaga, Y. Ikuhara, and S.-K. Lee Effect of alloying elements on the interfacial bonding strength and electric conductivity of carbon nano-fiber reinforced Cu matrix composites Mater Sci Eng A 449-451 2007 778 781
28. N. Darsono, D.-H. Yoon, and J. Kim Milling and dispersion of multi-walled carbon nanotubes in texanol Appl Surf Sci 254 11 2008 3412 3419
29. B. Munkhbayar, M.J. Nine, J. Jeoun, M. Bat-Erdene, H. Chung, and H. Jeong Influence of dry and wet ball milling on dispersion characteristics of the multi-walled carbon nanotubes in aqueous solution with and without surfactant Powder Technol 234 2013 132 140
30. Z.Y. Liu, S.J. Xu, B.L. Xiao, P. Xue, W.G. Wang, and Z.Y. Ma Effect of ball-milling time on mechanical properties of carbon nanotubes reinforced aluminum matrix composites Compos A Appl Sci Manuf 43 12 2012 2161 2168
31. L. Wang, H. Choi, J.-M. Myoung, and W. Lee Mechanical alloying of multi-walled carbon nanotubes and aluminium powders for the preparation of carbon/metal composites Carbon 47 15 2009 3427 3433
32. H.J. Choi, G.B. Kwon, G.Y. Lee, and D.H. Bae Reinforcement with carbon nanotubes in aluminum matrix composites Scripta Mater 59 3 2008 360 363
33. J. Wang, Z. Li, G. Fan, H. Pan, Z. Chen, and D. Zhang Reinforcement with graphene nanosheets in aluminum matrix composites Scripta Mater 66 8 2012 594 597
34. Y. Wu, G.-Y. Kim, and A.M. Russell Effects of mechanical alloying on an Al6061-CNT composite fabricated by semi-solid powder processing Mater Sci Eng A 538 2012 164 172
35. S. Wang, M. Tambraparni, J. Qiu, J. Tipton, and D. Dean Thermal expansion of graphene composites Macromolecules 42 14 2009 5251 5255
36. Y. Wu, and G.-Y. Kim Compaction behavior of Al6061 powder in the semi-solid state Powder Technol 214 2 2011 252 258
37. Y. Wu, G.-Y. Kim, I.E. Anderson, and T.A. Lograsso Fabrication of Al6061 composite with high SiC particle loading by semi-solid powder processing Acta Mater 58 13 2010 4398 4405
38. A.C. Ferrari, and J. Robertson Interpretation of Raman spectra of disordered and amorphous carbon Phys Rev B 61 20 2000 14095 14107
39. D. Graf, F. Molitor, K. Ensslin, C. Stampfer, A. Jungen, and C. Hierold et al. Spatially resolved raman spectroscopy of single- and few-layer graphene Nano Lett 7 2 2007 238 242
40. T.M.G. Mohiuddin, A. Lombardo, R.R. Nair, A. Bonetti, G. Savini, and R. Jalil et al. Uniaxial strain in graphene by Raman spectroscopy: g peak splitting, Grüneisen parameters, and sample orientation Phys Rev B 79 20 2009 205433
41. A.M.K. Esawi, and M.A. El Borady Carbon nanotube-reinforced aluminium strips Compos Sci Technol 68 2 2008 486 492
42. C. Suryanarayana Mechanical alloying and milling Prog Mater Sci 46 1-2 2001 1 184
43. I.-Y. Kim, J.-H. Lee, G.-S. Lee, S.-H. Baik, Y.-J. Kim, and Y.-Z. Lee Friction and wear characteristics of the carbon nanotube-aluminum composites with different manufacturing conditions Wear 267 1-4 2009 593 598
44. J. Jin-long, W. Hai-zhong, Y. hua, and X. Jin-cheng Fabrication and wear behavior of CNT/Al composites Trans Nonfer Metals Soc China 17 s1A 2007 s113 s116
45. L. Jun, L. Ying, L. Lixian, and Y. Xuejuan Mechanical properties and oil content of CNT reinforced porous CuSn oil bearings Compos B Eng 43 4 2012 1681 1686
46. J. Zhang, S. Ju, D. Jiang, and H.-X. Peng Reducing dispersity of mechanical properties of carbon fiber/epoxy composites by introducing multi-walled carbon nanotubes Compos B Eng 54 2013 371 376