Design of ship hull structures: A practical guide for engineers

Design of Ship Hull Structures: A Practical Guide for Engineers

Volumn , Issue , 2009, Pages 1-578

  Okumoto, Yasuhisa ^a   Takeda, Yu ^b   Mano, Masaki ^a   Okada, Tetsuo ^c  

^a KINKI UNIVERSITY   (Japan)

^b IHI CORPORATION   (Japan)

^c Japan Marine United   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84892258993     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-3-540-88445-3     Document Type: Book

References (130)

1. M. Zako: "Application of Probabilistic Finite Elements Method for Safety Evaluation of Storage Tank", Ishikawajima-Harima Engineering Review, Vol. 22, No. 3,May 1982 (in Japanese).
2. Nippon Kaiji Kyoukai: "Explanation of Revision of Rules and Regulations", 1964 (in Japanese).
3. Nippon Kaiji Kyoukai: "Explanation of Revision of Rules and Regulations and Other Technical rules", 1972 (in Japanese).
4. M. Mano: "Safety and Reliability of Welded Structures-Examples of Marine Structure Design", Machinery Design, Vol. 23, No. 9, Aug. 1979 (in Japanese).
5. No. 134 Research Group: "Research Report on Allowable Stress of Hull Structure Members", Japan Ship Research Association, March 1974 (in Japanese).
6. J. B. Caldwell: "Structural Reliability", Colloquium on Reliability as a Design Parameter in Marine Reactor System.
7. H. Okamura and H. Itagaki: "Probabilistic Treatment of Strength", Baifukan Book Store (in Japanese).
8. N. Salvesen, E. O. Tuck, and O. Faltinsen: "Ship Motions and Sea Load", Transactions of SNAME, Vol. 78, 1970.
9. J. Fukuda: "Statistic Prediction of Ship Response", Society of Naval Architects of Japan, Second Symposium on Ship Manoeuvrability, July 1969 (in Japanese).
10. Y. Tomita and S. Tozawa: "Wave Load and High Tensile Steel", Society of Naval Architects of Japan, Symposium on Ship's Strength and Failure Prevention, Oct. 1993 (in Japanese).
11. H. Kusumoto et al.: "Ship Hull Structure Design by DLA (Dynamic Loading Approach)", IHI Engineering Review, Vol. 27, No. 2, April 1994.
12. S. Taira: "Strength of Materials", Ohmsha, 1990 (in Japanese).
13. Y. Okumoto, A. Ando, Y. Niiro, and K. Hiyoku: "Computer-Aided Engineering System for Hull Structure-'FRESCO-S', ICCAS'88 China, Sept. 1988, pp. 79-90.
14. M. Yoshiki and T. Kanazawa: "Comprehensive Material Strength", 1976, p. 96, Yokendo (in Japanese).
15. Bulletin of Class NK No. 172, 1980, p. 144
16. Y. Kumakura, T. Nagano, Y. Okumoto, and K. Tanida: "Stress and Motion Measurements on the Container Ship, 'Japan Ace' ", IHI Engineering Review, Vol. 8, No. 2, May 1975, pp. 47-67.
17. The Japan Welding Society: "Welding Handbook, 4th edition", p. 46 (in Japanese).
18. W. Muckle: "Strength of Ships' Structure", 1967, Ednard Arnold (Publishers) Ltd. London.
19. K. Terasawa edited: "Strength of Ship Hull Structure", Kaibundo, 1974 (in Japanese).
20. The Kansai Society of Naval Architects: "Handbook of Ship Design, 4th Edition", Kaibundo (in Japanese).
21. N. Jones: "Plastic Behavior of Ship Structure", Transactions of SNAME, Vol. 84, pp. 115-139, 1976.
22. S. Timoshenko: "Vibration Problems in Engineering", Van Nostrand, 1950.
23. T. Matsudaira: "Basic Theory of Vibration", Gendaikogakusha, 1973 (in Japanese).
24. Y. Takeuchi edited: "Pandect of Design Engineering", Fuji Thecno System, 1996, p. 842 (in Japanese).
25. Y. Okumoto, Y. Takeda, and K. Hiyoku: "Modern Hull Structure Design System 'COSMOS' ", ICCAS'85 Trieste, Italy, Sept. 1985, pp. 275-284.
26. K. Kitamura: "Studies on Optimization of Ship Structure (3rd Report)-Optimum Design of Longitudinal Members of Tanker", Journal of the Society of Naval Architects of Japan, Vol. 132, 1972, pp. 335-348 (in Japanese).
27. T. Okada and I. Neki: "Utilization of Genetic Algorithm for Optimizing the Design of Ship Hull Structures", Naval Architecture and Ocean Engineering Vol. 31, 1994, pp. 71-83.
28. A. Abe, T. Okada, and I. Neki: "Development of Optimum Design System for Container Ship", IHI Engineering Review Vol. 32, No. 4, 1992, pp. 260-266 (in Japanese).
29. T. Okada, M. Toyoda, and E. Kobayashi: "Practical Initial Design Optimization of Large Container Ships", PRADS2007 Houston, USA, Oct. 2007.
30. T. Nagashima, F. Niwa, H. Hirano, and T. Okada: "Application of Automatic Nesting to Ship Hulls Using the FINEST Algorithm", IHI Engineering Review, Vol. 38, No. 1, 2005.
31. T. Nagashima, S. Matsuoka, H. Tawara, F. Niwa, and T. Okada: "Automatic Nesting to Ship Hulls Using the FINEST Algorithm (2nd Report)-Expansion to Nesting for Plate Size Determination-", IHI Engineering Review, Vol. 45, No. 4, 2005 (in Japanese).
32. M. Mano: "On Recent Ship Vibration", Bulletin of the Society of Naval Architect of Japan, No. 692, Feb. 1987 (in Japanese).
33. "40 years History of Japan Ship Research Association", 1993 (in Japanese).
34. T. Nagano, O. Ushirokawa, M. Mano, and Y. Yamada: "Introduction of Non-uniformity into Ship Hull Structure", PRADS'87 Trondheim Proceedings, June 1987.
35. H. Yajima, T. Yao, and M. Yamamoto: "A Study on Buckling/Plastic Collapse Behavior of Steel Plate having Surface Layers with Ultra Fine Grain Microstructure", TEAM'97 Singapore Proceedings, Dec. 1997.
36. Nippon Steel Corporation: "NSC's Steel Plates for Marine Structures", Cat. No. EXE350, Aug. 1974, p. 104.
37. Study Group of Shipbuilding Text Book: "Fundamentals ofMerchant Ship Design", Seizando, p. 168 (in Japanese).
38. Y. Ishii and H. Tamura: "General of Welding Engineering", Kyoritsu-Shuppan, p. 106 (in Japanese).
39. H. Kihara: "Modern Welding Engineering", Ohmsha, p. 147 (in Japanese).
40. Y. Okumoto: "Dimensional Error of Assembled Blocks", Journal of Ship Production, Vol. 17, No. 1, Feb. 2001, pp. 8-15.
41. N. Yamamoto: "Studies on the Generation and Progression of Corrosion in Structural Hull Members", ClassNK Technical Bulletin, Vol. 15, 1997, p. 48.
42. Y. Okumoto: "Residual Stress on Ship Hull Structure", Proceedings of TEAM'97 Singapore, Dec. 1997, pp. 290-303.
43. H. Togawa: "Guide for Finite Element Method", Science-sha, 1985l (in Japanese).
44. K. Harumi and A. Ohtsuki: "Introduction for Finite Element Method", Kyoritsu-shuppan, 1996 (in Japanese).
45. R. Kamichika and H. Ohya: "Stress Analysis (2)-Application of FEM Stress Analysis to Actual Structures", Journal of the JapanWelding Society, Vol. 66 No. 3, April 1997, pp. 147-150 (in Japanese).
46. The Kansai Society of Naval Architects, Japan: "Handbook of Ship Design", Kaibundo, June 1996 (in Japanese).
47. D. Faulkner: "A Review of Effective Plating for Use in the Analysis of Stiffened Plating in Bending and Compression", Journal of Ship Research, Vol. 19, No. 1, 1975, pp. 1-17.
48. Lloyd's Register of Shipping: "Rules and Regulations for the Classification of Ships Part 3", Jan. 1996.
49. Pandect of Hull Structure Strength, Commemoration of Retirement of Prof. Yoshiki, 1970, pp. 21-24 (in Japanese).
50. IHI Aioi Ship Design Department: "Considerations on Hull Structure Detail Design", Ishikawajima-Harima Engineering Review, Vol. 8, No. 39, Jan. 1968 (in Japanese).
51. M. Mano: "A Calculation Method of Girder's Face Plate", Harima-Zousen Engineering Review, No. 7, April 1958 (in Japanese).
52. Lloyd's Register of Shipping: "Klasserfaren heter Betraffande Skrovskador panyare Och Storre Typer av Fartyg", 1971.
53. Y. Ochi, T. Nagano, K. Yamaguchi, H. Kimura, and H. Kashima: "Strength around Slot Cut for Pass through Longitudinal Member", Ishikawajima-Harima Engineering Review, Vol. 11, No. 6, Nov. 1971 (in Japanese).
54. Nippon Kaiji Kyokai: "On Damage of Side Longitudinals of VLCC's," Report Presented to Study Group on High Tensile Steel Hull Structure, Nov. 1991 (in Japanese).
55. Y. Nakajima, N. Iino, I. Neki, O. Ushirokawa, M. Maeda, and H. Sasajima: "Fatigue Strength Design of Ship Structure," IHI Engineering Review, Vol. 26, No. 2, April 1993.
56. K. Yuasa: "Strength of Material", Sankaidou Book Store, Feb. 1942 (in Japanese).
57. Technical Research Committee: The West-Japan Society of Naval Architects: "Research and Investigation on Hull Structure Damage", Jan. 1970 (in Japanese).
58. S. P. Timoshenko and S.Woinowsky-Krieger: "Theory of Plates and Shells (Second Edition)", McGRAW-HILL.
59. N. Jones: "Plastic Behavior of Ship Structure", Trans. of SNAME, Vol. 84, 1976.
60. T. Fujii and K. Uchino: "Plastic Design of Flat Plate Considering Membrane Force", Ishikawajima-Harima Engineering Review, Vol. 2, No. 4, Jan. 1962 (in Japanese).
61. "An Interpretation of Rules and Guidance for the Survey and Construction of Steel Ships", Transactions of Nippon Kaiji Kyokai, 1980 (in Japanese).
62. T. Nitta, T. Wada, and M. Mano: "Some Development in Design Details of Hull Structure", Ishikawajima-Harima Engineering Review, Vol. 9, No. 4, July 1969 (in Japanese).
63. M. Mano, M. Takata, I. Ogura, H. Okamoto, and H. Matsumoto: "Some Application of the Finite Element Method to Hull Structure", Ishikawajima-Harima Engineering Review, Vol. 12, No. 3, May 1972 (in Japanese).
64. "Low Carbon Equivalent Steel of 36kgf/mm2 Class of Yield Stress Produced by NCT Process", NKK Technical Report (in Japanese).
65. J. Yagi and W. Yasukawa: "On Aspect Ratio of Minimum Weight Stiffened Plane Structure", Bulletin of The Kansai Society of Naval Architects, Japan, No. 104, Dec. 1961 (in Japanese).
66. K. Kitamura: "Study on Optimum Design of Hull Structure" Journal of the Society of Naval Architects of Japan, Vol. 130, Dec. 1971 (in Japanese).
67. J. Nagasawa and Y. Honma: "On the MinimumWeight of Stiffened Panel with Lateral Load", Journal of the Society of Naval Architects of Japan, Vol. 127, June 1970 (in Japanese).
68. S. P. Timoshenko and J. N. Goodier: "Theory of Elasticity (Third Edition)", McGRAW-HILL.
69. K. Terasawa edited: "Strength of Ship Hull Structure", Kaibundo, 1974 (in Japanese).
70. A. Nanba, K. Tomiyoshi, M. Nakayama, and S. Miyazaki: "On the Initial Deflection of Ship", Bulletin of the Kansai Society of Naval Architects, Japan, Vol. 137, Sept. 1970 (in Japanese).
71. Y. Yamamoto, M. Fujino, and T. Fukasawa: "Ship Longitudinal Motion and Longitudinal Strength in Waves in Consideration with Non-linearity", Journal of the Society of Naval Architects of Japan, No. 143, 144, 145, June and Dec. 1978 and June 1979 (in Japanese).
72. M. Mano: "Simple Calculation Method of Hull Girder Deflection", Technical Review of Harima Ship Building Co. Ltd., No. 10, May 1959 (in Japanese).
73. M. Mano: "Happiness of Designer", Bulletin of the Society of Naval Architects of Japan, No. 613, July 1980 (in Japanese).
74. Y. Yamaguchi: "Study on Fatigue Strength of Hull Structural Members (No. 2)", Report of NK's Research Institute, Dec. 1970 (in Japanese).
75. Report of Ship Research Association of Japan, SR200-2, May 1977 (in Japanese).
76. Y. Fujita: "Determination of Leg Length of Fillet Welding", Bulletin of the Society of Naval Architects of Japan, No. 595, 597, 598 (in Japanese).
77. Y. Matsuyama and Y. Shibata: "On All-Welded Vessel", Bulletin of the Society of Naval Architects of Japan, Vol. 267, Jul. 1946 (in Japanese).
78. Y. Okumoto: "Residual Stress on Ship Hull Structure", Journal of Ship Production, Vol. 14, No. 4, Nov. 1998, pp. 277-286.
79. http://www.twi.co.uk/j32k/protected/band 13/oilgas caseup31.html
80. http://www.astm.org/BOOKSTORE/MNL41PDF/01.3 27.pdf
81. David Broek: "Elementary Engineering Fracture Mechanics (Fourth revised edition)", Martinus Nijhoff Publishers, p. 8.
82. Bulletin of Class NK No. 178, 1982, pp. 2-7(in Japanese).
83. H. Yajima et al.: "A Suggested Method of Ship Hull Plating Fracture Toughness Assessment", Transactions of The West-Japan Society of Naval Architects, No. 75, 1988, pp. 200-211 (in Japanese).
84. A. Abe: "Study of Structural Design Method of SPB Tank", Doctoral Dissertation of Tokyo Univ., Dec. 2000, pp. 103-136 (in Japanese).
85. T. Okada, A. Abe, O. Ushirokawa, A. Itoh, M. Itoh, and Y. Nakajima: "Ship Structure Design Based on Direct Calculation", IHI Engineering Review, Vol. 29 No. 3, July 1996.
86. Press Asahi Co Ltd.: "Asahi News Paper" 25th Sept. 1976, pp. 23 (in Japanese).
87. H. Ohtsubo and M. Kitamura: "Design of Midship Section by Expert System", Journal of the Society of Naval Architects of Japan, Vol.164, Dec. 1988 (in Japanese).
88. Y. Akita, Y. Masuda, I. Yamaguchi, A. Nitta, M. Hitaka, K. Tsutsui, T. Yuasa, and N. Hikasa: "On Total System for Longitudinal Strength Analysis in Nippon Kaiji Kyokai", Bulletin of the Society of Naval Architects of Japan, No. 527, May 1973, pp. 1-7 (in Japanese).
89. Nippon Kaiji Kyokai: "Revision of Hull Construction Rule and its Explanation", 1972, Nippon Kaiji Kyokai, Tokyo issue (in Japanese).
90. N. V. Barabanov: "On Replacement of Floating Bulwarks for Ones Attached to Sheer Strake", OMAE 1988, Houston, Texas.
91. J. Yagi, Y. Tomita, and Y. Fujimoto: "Fatigue Strength Criteria for Ship Structure", Journal of the Society of Naval Architects of Japan, Vol. 147, June 1980 (in Japanese).
92. M. Mano: "Detail Design of Hull Structure", PRADS '83 Tokyo & Seoul, 1983.
93. S. Tamai, F. Niwa, M. Toyoda, and T. Okada: "Practical Consideration on Detailed Design of Ship Structure", Proceedings of TEAM2001 Jochiwon, Oct. 2001.
94. J. McCallum: "The Strength of Fast Cargo Ships", RINA Meeting, April 24 1974.
95. Y. Yamamoto, T. Fukasawa, and M. Fujino: "Ship Longitudinal Motion and Strength inWaves by Non-linear Analysis-First, Second and Third Reports", Journal of the Society of Naval Architects of Japan, Vol. 143, 144 and 145, June 1978, Dec. 1978 and June 1979 (in Japanese).
96. A. Thayamballi, L. Kutt, and Y. N. Chen: "Advanced Strength and Structural Reliability Assessment of the Ship's Hull Girder", Advances in Marine Structures, Elsevier Applied Science Publishers, pp. 136-151, 1986.
97. M. Mano: "A Reliable Design of Hull Structure", First International Symposium on Ship Reliability, Varna, Sept. 1985.
98. Y. Ogawa: "Structural System in IHI (Ishikawajima-Harima Heavy Industries Co. Ltd.) of 480,000 DWT Tanker", Symposium on Structure and Strength of Large Ship (Sponsored by the Society of the Naval Architects of Japan, March 1974 (in Japanese).
99. Nippon Kaiji Kyokai: Bulletin of Nippon Kaiji Kyokai, Jan. 1975 (in Japanese).
100. Y. Ochi, T. Nagano, I. Yamaguchi, H. Kimura, and H. Kashima: "Strength around Slot for Passing Through Longitudinal Frame", Ishikawajima-Harima Engineering Review, Vol. 11, No. 6, Nov. 1971 (in Japanese).
101. Slot Meeting in Hull Structure Committee of the Society of Naval Architects of Japan: "Study to Prevent Damage Around Slot on Transverse Web of Large Ship No.1 and No.2" Bulletin of the Society of Naval Architects of Japan, No. 505 and 506, July and Aug. 1971 (in Japanese).
102. Aioi Ship Design Department: "Consideration in Detail Design of Hull Structure", Ishikawajima-Harima Engineering Review, Vol. 8, No. 39, Jan. 1968 (in Japanese).
103. D. P. Hong, O. H. Kim, and Y. S. Lee: "Analysis of Structural Damage of a Large Ore/Coal Carrier", SNAME STAR Symposium, Philadelphia, May 1987.
104. Y. Okumoto: "Study on Ship Hull Structure at Grounding Condition", Doctoral dissertation of Hiroshima University, Oct. 1986, pp.18-46 (in Japanese).
105. T. Fujii and K. Uchino: "Plastic Design of Flat Plate with Membrane Force", Ishikawajima-Harima Engineering Review, Vol. 2, No. 4, Jan. 1962 (in Japanese).
106. Y. Akita, S. Shimizu, and K. Kitamura: "On Shear Rigidity of Swash Bulkhead", Bulletin of the Society of Naval Architects of Japan, Vol. 123, June 1968, pp.144-152 (in Japanese).
107. T. Nagano, O. Ushirokawa, M. Mano, and Y. Yamada: "Introduction of Non-Uniformity into Ship Structure", Proceedings of PRADS'87 Trondheim, June 1987, pp. 1089.
108. M. Yamakoshi and K. Kagawa: "On Shear Deflection of Wing Tank", Journal of the Kansai Society of Naval Architects, Japan, Vol.29, Feb. 1965 (in Japanese).
109. S. Kurose: "Shear Rigidity of Corrugated Bulkhead" Interior Report of Tsuneishi Shipbuilding Co. Ltd., March 1988 (in Japanese).
110. The Kansai Society of Naval Architects, Japan: "Handbook of Ship Design", June 1996, Kaibundo, Tokyo (in Japanese).
111. I. Neki and T. Okada: "Optimum Structural Design Using Genetic Algorithm and Finite element Method", Journal of the Society of Naval Architect of Japan, Vol. 177, June 1995, pp.327-338 (in Japanese).
112. No.166 Committee: "The Report of the Structural Strength of Ships Loading Steel Coil", Shipbuilding Research Association of Japan, March 1977 (in Japanese).
113. The Naval Architect, April 1991.
114. Society of the Naval Architects of Japan: "Shipbuilding History in Showa Era", Vol. 1, Hara Book Store.
115. H. Yajima: "Lessons to Learn from Examples of Damages to Large Steel Structures", Trans. of the West-Japan Society of Naval Architects, Vol. 90, Aug. 1995, pp.245-251(in Japanese).
116. M. Mano: "Strength and Vibration Problems in the Area of Hull Fittings" No.12 Summer Seminar New Shipbuilding Technology, Society of the Naval Architects of Japan, Sept. 1986 (in Japanese).
117. Y. Ochi, K. Tanida, and R. Fujino: "Anti-Vibration Design of Engine Room, First Report Engine Room Double Bottom" Ishikawajima-Harima Engineering Review, Vol. 16, No. 6, 1976 (in Japanese).
118. S. Nakashima and M. Mano: "Research on Deflection of Engine Room Double Bottom", Ishikawajima-Harima Engineering Review, Vol. 11, No. 5, Sept. 1971 (in Japanese).
119. G. C. Volcy: "Experience with Marine Engineering System over the Last Thirty Years" Andrew Laing Lecture 1983-NECIES Newcastle upon tyne.
120. N. Okamura, H. Sasajima, and K. Tanida: "Vortex Induced Heavy Vibration in Enclosed Hull Cavities" Transactions of the Royal Institution of Naval Architects Vol. 130, 1988.
121. P. W. Ayling: "Propeller Bossing Vibration", RINA, Vol. 107, 1965.
122. M. Mano, Y. Ochi, and K. Fujii: "Prevention and Remedy of Ship Vibration", Ishikawajima-Harima Engineering Review, Vol. 10, No. 3, July 1977.
123. M. Mano, F. Takano, and K. Furuya: "Investigation of Ship Vibration and Its Application", Ishikawajima-Harima Engineering Review, Vol.1, No.1, Apr. 1961 (in Japanese).
124. M. Mano: "Vibrations des Superstructures des Navires", Bureau Veritas Bulletin Technique, Vol. 53, No. 3, Mar. 1971.
125. M. Yamaguchi: "Experimental Investigation on Propeller Exciting Force", Ishikawajima-Harima Engineering Review, Vol. 16, No.6, Nov. 1976 (in Japanese).
126. R. Fujino: "Propeller Exciting Force", Proceeding of 5th TEAM, Aug. 1991.
127. Y. Takeda and H. Kusumoto: "Elastic Mounting System of Main Engine of a Cruise Ship", Proceedings of TEAM'98 Kanazawa, July 1998.
128. Y. Takeda, H. Kusumoto, H. Sasajima, K. Tanida, Y. Koike, N. Takahashi, and T. Iwanami: "Development of ActiveMass Damper for Ships by Hydraulic Control", Journal of the Society of Naval Architect of Japan, Vol. 171, May 1992 (in Japanese).
129. R. Taggert (Editor): "Ship Design and Construction", SNAME, 1980.
130. H. W. Stapel, A. W. Vredevldt and W. de Koning: "Analysis of the Fatigue Damage Development in the Expansion Joints of the S.S. Rotterdam", 7th PRADS'98 Proceedings, Sept. 1998.