Challenges in analytical quality assurance

Challenges in Analytical Quality Assurance

Volumn , Issue , 2011, Pages 1-356

  Reichenbächer, Manfred ^a   Einax, Jürgen W ^a  

^a FRIEDRICH SCHILLER UNIVERSITY JENA   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84892228285     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-3-642-16595-5     Document Type: Book

References (117)

1. DIN EN ISO 8402 (2005) Quality management and quality assurance-vocabulary. Beuth, Berlin
2. ISO 9001 (2008) Quality management systems-requirements. Beuth, Berlin
3. Kromidas S (ed) (1995) Qualitat im analytischen Labor. Wiley-VCH, Weinheim
4. Kromidas S (2000) Handbuch Validierung in der Analytik 1. Aufl. Wiley-VCH, Weinheim
5. EN ISO/IEC 17025 (2000) General requirements for the competence of testing and calibration laboratories. European Committee for Standardization, Brussels
6. Brown SD, Tauler R, Walczak B (eds) (2009) Comprehensive chemometrics: chemical and biochemical data analysis (4-volume set). Elsevier, Amsterdam, Oxford
7. Brereton RGB (2007) Applied chemometrics for scientists. Wiley, Chichester
8. Einax JW, Zwanziger HW, Geiß S (1997) Chemometrics in environmental analysis. Wiley-VCH, Weinheim
9. Massart DL, Vandeginste BGM, Buydens LMC, De Jong S, Lewi PJ, Smeyers-Verbeke J (1997) Handbook of chemometrics and qualimetrics. Part A. Elsevier, Amsterdam
10. Otto M (2007) Chemometrics, 2nd edn. Wiley-VCH, Weinheim
11. Danzer K (2007) Analytical chemistry-theoretical and metrological fundamentals. Springer, Berlin
12. Doerffel K (1990) Statistik in der analytischen Chemie, 5. Aufl. Deutscher Verlag for Grundstoffindustrie, Leipzig
13. Ellison SLR, Berwick VJ, Duguid Farrant TJ (2009) Practical statistics for the analytical scientist, 2nd edn. RSC, Cambridge, UK
14. Funk W, Dammann V, Donnevert G (2005) Qualitatssicherung in der Analytischen Chemie, 2. Aufl. Wiley-VCH, Weinheim
15. Gottwald W (2000) Statistik fur Anwender. Wiley-VCH, Weinheim
16. ISO 3534-2 (2006) Statistics-vocabulary and symbols-part 2: applied statistics. International Organization for Standardization, Geneva
17. Joint Committee for Guides in Metrology (JCGM) (2008) International vocabulary of metrology-basic and general concepts and associated terms (VIM). International Organization for Standardization, Geneva
18. ISO Guide 98 (1995) Guide to the expression of uncertainty in measurement. International Organization for Standardization, Geneva
19. Danzer K (2007) Analytical chemistry-theoretical and metrological fundamentals. Springer, Berlin
20. Menditto A, Patria M, Magnusson B (2007) Understanding the meaning of accuracy, trueness and precision. Accred Qual Assur 12:45-47
21. Danzer K (1989) Robuste Statistik in der analytischen Chemie. Fresenius Z Anal Chem 335:869-875
22. Massart DL, Vandeginste BGM, Buydens LMC, De Jong S, Lewi PJ, Smeyers-Verbeke J (1997) Handbook of chemometrics and qualimetrics-part A. Elsevier, Amsterdam
23. Ellison SLR, Berwick VJ, Duguid Farrant TJ (2009) Practical statistics for the analytical scientist, 2nd edn. RSC, Cambridge
24. Doerffel K (1990) Statistik in der analytischen Chemie, 5 Aufl. Deutscher Verlag fur Grundstoffindustrie, Leipzig
25. Danzer K (1989) Robuste Statistik in der analytischen Chemie. Fresenius Z Anal Chem 335:869-875
26. Massart DL, Vandeginste BGM, Buydens LMC, De Jong S, Lewi PJ, Smeyers-Verbeke J (1997) Handbook of chemometrics and qualimetrics, part A. Elsevier, Amsterdam
27. Funk W, Dammann V, Donnevert G (2005) Qualitatssicherung in der analytischen Chemie, 2nd edn. Wiley-VCH, Weinheim
28. DIN EN 53 804-1 (2002) Statistical evaluation-part 1: continuous characteristics. Beuth, Berlin
29. Linsinger TPJ, Kandler W, Koska R, Grasserbauer M (1998) The influence of different evaluation techniques on the results of interlaboratory comparison. Accred Qual Assur 3:322-327
30. DeLa Calle Garcia D, Magnaghi S, Reichenbacher M, Danzer K (1996) Systematic optimization of the analysis of wine bouquet components by solid-phase-microextraction. J High Resol Chromatogr 19:257-262
31. DIN 51603-1 (2008) Liquid fuels-fuel oils, part 1: fuel oil specifications. Beuth, Berlin
32. Ellison SLR, Berwick VJ, Duguid Farrant TJ (2009) Practical statistics for the analytical scientist, 2nd edn. RSC, Cambridge
33. DIN ISO 57525-2 (2002) Accuracy (trueness and precision) of measurement methods and results-part 2: basic method for the determination of repeatability and reproducibility of a standard measurement method. Beuth, Berlin
34. Doerffel K (1990) Statistik in der analytischen Chemie, 5. Aufl. Deutscher Verlag fur Grundstoffindustrie, Leipzig, Germany
35. EudraLex (2010) The rules for governing medicinal products in the European Union, vol 4, Brussels
36. DIN EN ISO 10304-1 (2009) Water quality-Determination of dissolved anions by liquid chromatography of ions, part 1: determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulphate. Beuth, Berlin
37. DIN 38406-E 11 (1991) German standard methods for the examination of water, waste water and sludge; cations (group E). Determination of nickel by atomic absorption spectrometry (AAS). Beuth, Berlin
38. DIN ISO 8466-1 (1990) Water quality-calibration and evaluation of analytical methods and estimation of performance characteristics, part 1: statistical evaluation of the linear calibration function. Beuth, Berlin
39. Stookey LL (1970) Ferrocene-a new spectrophotometric reagent for iron. Anal Chem 42:780
40. Doerffel K (1990) Statistik in der analytischen Chemie 5. Aufl. Deutscher Verlag fur Grundstoffindustrie, Leipzig
41. DIN ISO 8466-1 (2001) Water quality-calibration and evaluation of analytical methods and estimation of performance characteristics, part 2: calibration strategy for non-linear secondorder calibration functions. Beuth, Berlin
42. ICH Harmonised Tripartite Guideline (2005) Validation of analytical procedures: text and methodology Q2(R1). http://www.ICH.org
43. DIN EN ISO/IEC 17025 (1999) General requirements for the competence of testing and calibration laboratories. Beuth, Berlin
44. ISO 3534-2 (2006) Statistics-vocabulary and symbols-part 2: applied statistics. International Organization for Standardization, Geneva
45. ICH Harmonised Tripartite Guideline (2005) Validation of analytical procedures: text and methodology Q2(R1). http://www.ICH.org
46. DIN EN 26777 (1993) Water quality; determination of nitrite; molecular absorption spectrometric method. Beuth, Berlin
47. Joint Committee for Guides in Metrology (JCGM) (2008) International vocabulary of metrology-basis and general concepts and associated terms (VIM). International Organization for Standardization, Geneva
48. Pharm. EUR. 6. Ausgabe, hppt://www.pharmeur.org
49. OECD-Dokumente zur Guten Laborpraxis, hppt://bfr.bund.de/cd/473
50. Good Laboratory Practice, hppt://de.wikipedia.org/wiki/GLP
51. Albert R, Horowitz W (1997) A heuristic derivation of the Horowitz curve. Anal Chem 69:789-790
52. Horowitz W, Kamps LR, Boyer KW (1980) Quality assurance in the analysis of of foods for trace constituents. J Assoc Off Anal Chem 63:1344
53. Massart DL, Vandeginste BGM, Buydens LMC, De Jong S, Lewi PJ, Smeyers-Verbeke J (1997) Handbook of chemometrics and qualimetrics, part A. Elsevier, Amsterdam
54. DIN 38402-51 (1986) German standard methods for the examination of water, waste water and sludge; general information (group A); calibration of analytical methods, evaluation of analytical results and linear calibration functions used to determine the performance characteristics of analytical methods. Beuth, Berlin
55. Funk W, Dammann V, Donnevert G (2005) Qualitatssicherung in der Analytischen Chemie,2. Aufl. Wiley-VCH, Weinheim
56. BS 6748 (1986) Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware and vireous enamel ware. Beuth, Berlin
57. DIN ISO 8466-2 (2004) Calibration and evaluation of analytical methods and estimation of performance characteristics. Beuth, Berlin
58. DE-Patent 10042498A1 (2002) Polyasparaginsaure Konzentrationsbestimmung mittels Fluorometrie
59. Menditto A, Patria M, Magnusson B (2007) Understanding the meaning of accuracy, trueness and precision. Accred Qual Assur 12:45-47
60. DIN 38402-71 (2002) German standard methods for the examination of water, waste water and sludge-general information-part 71: Procedure for verifying the equivalence of two analytical methods involving quantitative characteristics with a continous set of values. Beuth, Berlin
61. DIN EN ISO 10304-1 (2009) Water quality-determination of dissolved anions by liquid chromatography of ions-part 1, determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate. Beuth, Berlin
62. Thurman EM, Mills MS (1998) Solid-phase-extraction-principles and practice, chemical analysis: A series of monographs on analytical chemistry and its applications Vol 147. Wiley-VCH, Weinheim
63. Pawliszyn J (1996) Solid-phase-microextraction: theory and practice. Wiley-VCH, Weinheim
64. Kolb B, Ettre LS (2006) Static headspace-gas chromatography-theory and practice, 2nd edn. Wiley-Interscience, New York
65. DIN32633 (1998) Chemical analysis-methods of standard addition-procedure, evaluation. Beuth, Berlin
66. Ehrlich G, Danzer K (2007) Nachweisvermogen von Analysenverfahren- Objektive Bewertung und Ergebnisinterpretation. Springer, Berlin, Heidelberg
67. Danzer K (2007) Analytical chemistry-theoretical and metrological fundamentals. Springer, Berlin, Heidelberg
68. DIN 32645 (1994) Nachweis-, Erfassungs-und Bestimmungsgrenze. Ermittlung unter Wiederholbedingungen. Begriffe Verfahren Auswertung, Beuth, Berlin
69. ISO11843-2 (2000) Capability of detection, part 2: methodology in the linear calibration case. International Organization for Standardization, Geneva
70. Currie LA (1995) Nomenclature in evaluation of analytical methods including detection and quantification capabilities. Pure Appl Chem 67:1699-1723
71. Kleiner J (2000), Software SQS2000. http://www.kleiner-j.de
72. Geiß S, Einax JW (2001) Comparison of detection limits in environmental analysis-is it possible? An approach on quality assurance in the lower working range by verification. Fresenius J Anal Chem 370:675-678
73. ICH Harmonised Tripartite Guideline (2005) Validation of analytical methods: Methodology, Q2A http://www.ich.org
74. DIN EN ISO 6878 Water quality-Determination of phosphorus-Ammonium molybdate spectrometirc method, Beuth, Berlin
75. The United States pharmacopoeia, USP24, The National formulary NF19
76. Heyden YV, Nijhuis A, Smeyers-Verbeke J, Vandeginste BGM, Massart DL (2001) Guidance for robustness/ruggedness tests in method validation. J Pharmaceutical and Biomedical Analysis 24:723-53
77. Ellison SLR, Berwick VJ, Duguid Farrant TJ (2009) Practical statistics for the analytical scientist, 2nd edn. RSC, Cambridge
78. Doerffel K (1990) Statistik in der analytischen Chemie 5. Aufl. Deutscher Verlag fur Grundstoffindustrie, Leipzig
79. Gliesing S, Garc?á DeLa Calle, Reichenbacher M, Bose M (1997) HPLC determination of tamoxifendihydrogencitrate with the base selective column UltraSep ES Parm RP8 in tablets. Pharmazie 52:3-4
80. Chan CC, Lee YC, Lam H, Zhang XM (2009) Analytical method validation and instrument performance verification. Wiley-Interscience, New York
81. Ermer J, Miller JHMcB (2005) Method validation in pharmaceutical analysis-a guide to best practice. Wiley-VCH, Weinheim
82. Pharm Eur (2009) 6. Ausgabe, 2.2.46, http://www.pheur.org
83. Shabir GA (2003) Validation of high-performance liquid chromatography methods for pharmaceutical analysis: understanding the differences and similarities of the US food and drug administration, the pharmacopeia and the International Conference on Harmonization. J Chromatogr A 987:57-66
84. Kolb B, Ettre LS (2006) Static headspace-gas chromatography-theory and practice, 2nd edn. Wiley-Interscience, New York
85. De la Calle D, Magnaghi S, Reichenbacher M, Danzer K (1996) Systematic optimization of the analysis of wine bouquet components by solid-phase microextraction. J High Resolut Chromatogr 19:257-261
86. DIN EN ISO/IEC 17025 (1999) General requirements for the competence of testing and calibration laboratories. Beuth, Berlin
87. ICH Harmonised Tripartite Guideline (2005) Good manufacturing practice-guide for active pharmaceutical ingredients. http://www.ich.org
88. Chan CC, Lam H, Lee YC, Zhang XM (eds) (2004) Analytical method validation and instrument performance verification, Chap. 10. Wiley, New York
89. Huber L (1999) Validation and qualification in analytical laboratories. Interpharm/CRS, Cambridge
90. Kromidas S (2000) Handbuch Validierung in der Analytik 1 Aufl. Wiley-VCH, Weinheim
91. Pharm. EUP (2009) 6. Ausgabe, http://www.pharmeur.org
92. US-Pharmacopeia, USP Sec. 4e 1. Weights and Balances
93. Xie M, Kuralmani V, Goh TN (2002) Statistical models and control charts for high quality processes. Springer, Berlin
94. Funk W, Dammann V, Donnevert G (2005) Qualitatssicherung in der Analytischen Chemie, 2 Aufl. Wiley-VCH, Weinheim
95. http://statsoft.com/textbook/quality-control-charts
96. Mullins E (2003) Statistics for the quality control chemistry laboratory. RSC, Cambridge
97. ISO 8258 (1991) Shewart control charts. International Organization for Standardization, Geneva
98. Copyright Statsoft, Inc.(1984-2003) Statistical quality control charts
99. DIN ISO 5725-2 (2002) Accuracy (trueness and precision) of measurement methods and results-part 2: basic method for the determination of repeatability and reproducibility of a standard measurement method. Beuth, Berlin
100. DIN 38402-41 (1984) German standard methods for the examination of water, waste water and sludge. General information (group A)-Inter-laboratory tests; planning and organization. Beuth, Berlin
101. DIN 38402-42 (2005) German standard methods for the examination of water, waste water and sludge-General informations (group A)-part 42: Interlaboratory trials for method validation, evaluation. Beuth, Berlin
102. ISO Guide 35 (2006) Certification of reference material-general and statistical principles. International Organization for Standardization, Geneva
103. ISO/IEC 17043 (2010) Conformity assessment-general requirements for proficiency testing. International Organization for Standardization, Geneva
104. DIN 38402-45 (2009) German standard methods for the examination of water, waste water and sludge-General information-Interlaboratory comparisons for proficiency testing of laboratories. Beuth, Berlin
105. EN ISO 10304-1 (2009) Water quality-determination of dissolved anions by liquid chromatography of ions-part 1: determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate. Beuth, Berlin
106. Massart DL, Vandeginste BGM, Buydens LMC, De Jong S, Lewi PJ, Smeyers-Verbeke J (1997) Handbook of chemometrics and qualimetrics, Part A. Elsevier, Amsterdam
107. Ellison SLR, Berwick VJ, Duguit Farrant TJ (2009) Practical statistics for the analytical scientist, 2nd edn. RSC, Cambridge
108. Lawn RE, Thompson M, Walker RF (1997) Proficiency testing in analytical chemistry. RSC, Cambridge
109. DIN EN ISO/IEC 17025 (1999) General requirements for the competence of testing and calibration laboratories, Beuth, Berlin
110. ISO guide 98 (GUM) (1995) International Organization for Standardization, Geneva, 1995
111. Ellison SLR, Rosslein M, Williams A (eds) (2004) Quantifying uncertainty in analytical measurements, EURACHEM/CITAC guide, 2nd edn. hppt://www. measurementuncertainty.org
112. Nordtest Report TR 537 (2003) Handbook for calculation of measurement uncertainty in environmental laboratories, 2nd edn. http://www.nordicinnovation. net/NTtec537
113. DEV A0-4 (2006) Leitfaden zur Abschatzung der Messunsicherheit aus Validierungsdaten. Beuth, Berlin
114. Kragten J (1994) Calculating standard deviations and confidence intervals with a universally applicable spreadsheet techniques. Analyst 119:216-66
115. DIN EN 38 407 F18 (1996) Determination of polycyclic aromatic hydrocarbons (PAH). Beuth, Berlin
116. DIN EN ISO 11 732 (2005) Water quality-Detection of ammonium nitrogen-Method by flow analysis (CFA and FIA) and spectrophotometric determination. Beuth, Berlin
117. DIN EN 10304-1 (2009) Determination of anions by liquid chromatography of ions, Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate, and sulfate. Beuth, Berlin