Design of new energy-friendly compositions

Fiberglass and Glass Technology: Energy-Friendly Compositions and Applications

Volumn , Issue , 2010, Pages 267-351

  Bingham, Paul A ^a  

^a UNIVERSITY OF SHEFFIELD   (United Kingdom)

Author keywords

Composition; Conductivity; Corrosion; Design; Devitrification; Durability; Efficiency; Energy; Environment; Glass; Liquidus; Melting; Models; Pollution; Properties; Raw materials; Refining; Reformulation; Soda lime silica; Viscosity

Indexed keywords

EID: 84892205950     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-1-4419-0736-3_7     Document Type: Chapter

References (226)

1. A. K. Lyle and F. V. Tooley, Glass composition design and development, in Handbook of glass manufacture, Edition 3, Section 1, F. V. Tooley, ed., Ashlee Publishing Co. Inc., New York, pp. 1-17 (1984).
2. The Carbon Trust, Good Practice Guide 127, Energy efficient environmental control in the glass industry, London, UK (2000).
3. The Carbon Trust, Energy Consumption Guide ECG027, Energy use in the container glass industry, London, UK (2005).
4. C. Madivate, F. Müller and W. Wilsmann, Glastech. Ber. Glass Sci. Technol., 69, 167-178 (1996).
5. C. M. de O. Madivate, J. Am. Ceram. Soc., 81, 3300-3306 (1998).
6. C. P. Ross and G. L. Tincher, Glass melting technology: A technical and economic assessment, M. Rasmussen, ed., Glass Manufacturing Industry Council, Westerville (2004).
7. Comité Permanent des Industries du Verre Européenes (CPIV), Glass Industry, the emission trading directive and competition: presentation of the glass industry, Brussels, Belgium (2000).
8. R. G. C. Beerkens and H. P. H. Muysenberg, Glastech. Ber., 65, 217-224 (1992).
9. R. G. C. Beerkens, H. A. C. Van Limpt and G. Jacobs, Glass Sci. Technol., 77, 47-57 (2004).
10. G. Enninga, K. Dytrych and H. Barklage-Hilgefort, Glastech. Ber., 65, 186-191 (1992).
11. W. C. Bauer and F. V. Tooley, Advanced methods of batch preparation, in Handbook of glass manufacture, Edition 3, Vol. II, Section 23, F. V. Tooley, ed., Ashlee Publishing Co. Inc., New York, pp. 1139-1157 (1984).
12. Integrated Pollution Prevention and Control (IPPC), Sector Guidance Note IPPC SG2, Secretary of State's Guidance for A2 Activities in the Glassmaking Sector, Department for the Environment, Food and Rural Affairs, London, UK (2006).
13. R. A. Drake, Environmental control in the glass industry, in Handbook of glass manufacture, Edition 3, Vol. II, Section 21, F. V. Tooley, ed., Ashlee Publishing Co. Inc., New York, pp. 1053-1109 (1984).
14. H. Barklage-Hilgefort, Glastech. Ber., 62, 113-120 (1989).
15. H. Barklage-Hilgefort, Glastech. Ber., 63, 101-110 (1990).
16. P. J. Doyle, Glass making today, Portcullis Press, Redhill (1979).
17. R. S. Arrandale, Furnaces, furnace design and related topics, in Handbook of glass manufacture, Edition 3, Vol. I, Section 5, F. V. Tooley, ed., Ashlee Publishing Co. Inc., New York, 249-386 (1984).
18. The Carbon Trust, Energy and carbon conversions fact sheet, London, UK (2006).
19. British Glass Manufacturer's Confederation (BGMC), UK glass manufacture: A mass balance study, Sheffield, UK (2003).
20. F. W. Krämer, Solubility of gases in glass melts, in Properties of glass-forming melts, L. D. Pye, A. Montenero and I. Joseph, eds., Taylor and Francis Publications, Boca Raton, pp. 405-482 (2005).
21. P. A. Bingham and M. Marshall, Glass Technol., 46, 11-19 (2005).
22. H. Barklage-Hilgefort and W. Sieger, Glastech. Ber., 62, 151-157 (1989).
23. I. Shulver, Glastech. Ber. Glass Sci. Technol., 67, 318-321 (1994).
24. A. Kasper, E. Carduck, M. Manges, H. Stadelmann and J. Klinkers, Ceram. Eng. Sci. Proc., 27, 203-214 (2006).
25. R. G. C. Beerkens and J. Van Limpt, Glastech. Ber. Glass Sci. Technol., 74, 245-257 (2001).
26. M. B. Volf, Chemical approach to glass: Glass science and technology, Vol. 7, Elsevier, Amsterdam (1984).
27. M. Cable and M. A. Chaudhry, Glass Technol., 16, 125-134 (1975).
28. R. J. Ryder, E. C. Taylor and K. B. Tanner, Glass Technol., 21, 199-205 (1980).
29. T. Lakatos, Glasteknisk. Tidskr., 31, 51-54 (1976).
30. U. Kircher, Glastech. Ber., 66, 279-283 (1993).
31. U. Kircher, Glastech. Ber., 70, 52-57 (1997).
32. H. A. Schaeffer, Glastech. Ber. Glass Sci. Technol., 69, 101-106 (1996).
33. A. Smrček, Glass, 83, 28-30 (2006).
34. H. Van Limpt and R. G. C. Beerkens, Glass Technol. Eur. J. Glass Sci. Technol. A, 48, 113-118 (2007).
35. A. Fluegel (2007), http://www.glassproperties.com.
36. A. K. Varshneya, Fundamentals of inorganic glasses, Edition 2, Society of Glass Technology, Sheffield (2006).
37. A. K. Lyle, Glass Ind., 48, 252-258 (1967).
38. N. F. Zhernovaya, V. I. Onishchuk, V. A. Kurnikov and F. E. Zhernovoi, Glass Ceram., 58, 329-331 (2001).
39. M. B. Volf, Mathematical approach to glass: Glass science and technology, Vol. 9, Elsevier, Amsterdam (1988).
40. Y. Bottinga and D. Weill, Am. J. Sci., 272, 438-475 (1972).
41. H. R. Shaw, Amer. J. Sci., 272, 870-893 (1972).
42. K. C. Lyon, J. Res. Nat. Bur. Std., 78A, 497-504 (1974).
43. T. Lakatos, L. G. Johansson and B. Simmingsköld, Glasteknisk. Tidskr., 27, 25-28 (1972).
44. T. Lakatos, L. G. Johansson and B. Simmingsköld, Glass Technol., 13, 88-95 (1972).
45. T. Lakatos, L. G. Johansson and B. Simmingsköld, Glasteknisk. Tidskr., 30, 7-8 (1975).
46. T. Lakatos and L. G. Johansson, Glasteknisk. Tidskr., 31, 31-35 (1977).
47. R. R. Cuartas, Bol. Soc. Esp. Ceram. Vidr., 23, 105-111 (1984).
48. A. I. Priven, Glass Phys. Chem., 23, 333-343 (1997).
49. A. Fluegel, Statistical analysis of viscosity, electrical resistivity, and further glass melt properties, in High temperature glass melt property database for process modelling, T. P. Seward, III and T. Vascott, eds., The American Ceramic Society, Westerville, pp. 187-256 (2005).
50. A. Fluegel, Glass Technol. Eur. J. Glass Sci. Technol. A, 48, 13-30 (2007).
51. G. Bonetti, Riv. Staz. Sper. Vetro, 28, 175-190 (1998).
52. P. Hrma, D. E. Smith, J. Matyáš, J. D. Yeager, J. V. Jones and E. N. Boulos, Glass Technol. Eur. J. Glass Sci. Technol. A, 47, 78-90 (2006).
53. G. W. Morey, J. Am. Ceram. Soc., 13, 683-713 (1930).
54. G. W. Morey, The properties of glass, American Chemical Society Monograph, Reinhold Publishing Corporation, New York (1938).
55. Owens-Illinois Glass Company General Research Laboratory, J. Am. Ceram. Soc., 27, 221-224 (1944).
56. F. T.Wallenberger, R. J. Hicks and A. T. Bierhals, J. Non-Cryst. Solids, 349, 377-387 (2004).
57. F. T. Wallenberger, R. J. Hicks and A. T. Bierhals, Ceram. Trans., 170, 181-199 (2004).
58. F. T. Wallenberger, R. J. Hicks and A. T. Bierhals, Glastech. Ber. Glass Sci. Technol., 77C, 170-183 (2004).
59. F. T.Wallenberger and R. J. Hicks, Glass Technol. Eur. J. Glass Sci. Technol. A., 47, 148-152 (2006).
60. F. T. Wallenberger, R. J. Hicks, P. N. Simcic and A. T. Bierhals, Glass Technol. Eur. J. Glass Sci. Technol. A., 48, 305-315 (2007).
61. J. V. Jones and S. M. Ohlberg, US Patent 5, 071, 796 (1991).
62. C. Dreyfus and G. Dreyfus, J. Non-Cryst. Solids, 318, 63-78 (2003).
63. G. Bonetti, Riv. Staz. Sper. Vetro, 24, 155-169 (1994).
64. G. Bonetti, Riv. Staz. Sper. Vetro, 29, 245-259 (1999).
65. L. Šašek, M. Bartuška and V. Van Thong, Silikaty, 17, 207-217 (1973).
66. C. L. Babcock, Silicate glass technology methods, Wiley and Sons, New York, pp. 222-236 (1977).
67. R. Backman, K. H. Karlsson, M. Cable and N. P. Pennington, Phys. Chem. Glasses, 38, 103-109 (1997).
68. K. H. Karlsson, R. Backman, M. Cable, J. Peelen and J. Hermans, Glastech. Ber. Glass Sci. Technol., 74, 187-191 (2001).
69. D. E. Sharp and L. B. Ginther, J. Am. Ceram. Soc., 34, 260-271 (1951).
70. J. Moore and D. E. Sharp, J. Am. Ceram. Soc., 41, 461-463 (1958).
71. O. A. Prokhorenko, Radiative thermal conductivity of melts, in High temperature glass melt property database for process modelling, Seward, T. P. III and Vascott, T. eds., The American Ceramic Society, Westerville, pp. 95-118 (2005).
72. N. P. Bansal and R. H. Doremus, Handbook of glass properties, Academic Press, Orlando (1986).
73. M. K. Choudhary and R. M. Potter, Heat transfer in glass-forming melts, in Properties of glass-forming melts, L. D. Pye, A. Montenero and I. Joseph, eds., Taylor and Francis Publications, Boca Raton, pp. 249-294 (2005).
74. T. P. Seward and T. Vascott, Introduction, in High temperature glass melt property database for process modelling, T. P. Seward, III and T. Vascott, eds., The American Ceramic Society, Westerville, pp. 1-26 (2005).
75. J. Endrys, F. Geotti-Bianchini and L. De Riu, Glastech. Ber. Glass Sci. Technol., 70, 126-136 (1997).
76. R. W. Douglas and M. S. Zaman, Phys. Chem. Glasses, 10, 125-132 (1969).
77. T. Bates, Ligand field theory and absorption spectra of transition metal ions in glass, in Modern aspects of the vitreous state, J. D. Mackenzie, ed., Butterworths Publications, London, Vol. 2, pp. 195-254 (1962).
78. W. A. Weyl, Coloured glasses, Society of Glass Technology, Sheffield (1951).
79. G. H. Sigel, Optical absorption of glasses, in Treatise on materials science and technology, Vol. 26, M. Tomozawa and R. H. Doremus, eds., Academic Press, New York, pp. 5-89 (1977).
80. Waste Resource Action Programme (WRAP), Container lite final report - Demonstrating glass lightweighting, London, UK (2007).
81. P. K. Gupta, Glass fibers for composite materials, in Composite materials series 2: Fibre reinforcements for composite materials, A. R. Bunsell, ed., Elsevier, Amsterdam (1988).
82. K. L. Loewenstein, The manufacturing technology of continuous glass fibres, Edition 3, Elsevier, Amsterdam (1993).
83. G. Bonetti, Riv. Staz. Sper. Vetro, 27, 289-301 (1997).
84. L. Penberthy, Glass composition design and development, in Handbook of glass manufacture, Edition 3, Section 1, F. V. Tooley, ed., Ashlee Publishing Co. Inc., New York, pp. 387-400 (1984).
85. F. Scarfe, Glass Technol., 21, 37-50 (1980).
86. J. Stanek, Electric melting of glass, glass science and technology 1, Elsevier, Amsterdam, Holland (1977).
87. W. Trier, Glass furnaces: Design construction and operation, Translation by K. L. Loewenstein, Society of Glass Technology, Sheffield (1987).
88. A. K. Varshneya, T. Vascott, R. Karuppanan and J. M. Jones, Electrical resistivity, in High temperature glass melt property database for process modelling, T. P. Seward, III and T. Vascott, eds., The American Ceramic Society, Westerville, pp. 173-186 (2005).
89. O. V. Mazurin and O. A. Prokhorenko, Electrical conductivity of glass melts, in Properties of glass-forming melts, L. D. Pye, A. Montenero and I. Joseph, eds., Taylor and Francis Publications, Boca Raton, pp. 295-338 (2005).
90. J. E. Shelby, Introduction to glass science and technology, Society of Chemistry, Letchworth (1997).
91. H. Müller-Simon and K. Gitzhofer, Glass Technol. Eur. J. Glass Sci. Technol. A, 49, 83-90 (2008).
92. D. M. Rue, J. Servaites and W. Wolf, Industrial glass bandwidth analysis, Gas Technology Institute, Des Plaines (2006).
93. R. L. Schwenninger, D. A. Hanekamp and H. R. Foster, US Patent 4, 849, 004 (1989).
94. K. Natterman, US Patent 6, 401, 492 (2002).
95. K. Natterman, US Patent 6, 588, 233 (2003).
96. F. Karetta, J. Witte, K. D. Duch, D. Gobike, W. Muench, A. Jakway, R. Eichholz and F. T. Lentes, US Patent 7, 231, 788 (2007).
97. G. A. Pecoraro, L. J. Shelestak and J. E. Cooper, US Patent 4, 919, 700 (1990).
98. H. Kobayashi, S. E. Jaynes and R. G. C. Beerkens, World Patent WO/2004/092086 (2004).
99. H. Kobayashi and R. G. C. Beerkens, US Patent 5, 922, 097 (1999).
100. S. Rudolph, H. Förster and F. Gebhardt, Glastech. Ber., 63, 198-203 (1990).
101. G. Roeth, T. Pfeiffer and K. D. Duch, US Patent 6, 769, 272 (2004).
102. M. P. Knox and G. J. Copley, Glass Technol., 38, 91-96 (1997).
103. Carbon Trust, Future Practice Report 68, Enhanced energy efficiency through the ultrasonic refining of glass, London, UK (1998).
104. A. M. Huber and B. D. Tinianov, US Patent Application US 2005/0115276 A1 (2005).
105. V. Tonarová and L. Nmec, Sklar. Keram., 56, 77-80 (2006).
106. E. R. Begley, Refractories, in Handbook of glass manufacture, Edition 3, Section 7. F. V. Tooley, ed., Ashlee Publishing Co. Inc., New York, pp. 401-454 (1984).
107. A. D. Davis, Refractories (Update), in Handbook of glass manufacture, Edition 3, Section 7. F. V. Tooley, ed., Ashlee Publishing Co. Inc., New York, pp. 454-1 to 454-24 (1984).
108. M. Cable, in Corrosion of advanced ceramics, K. G. Nickeled., ed., Kluwer Academic Publ., Dordrecht, pp. 285-296 (1994).
109. M. Dunkl, Glastech. Ber. Glass Sci. Technol., 67, 325-334 (1994).
110. V. K. Pavlovskii and Y. S. Sobolev, Glass Ceram., 48, 558-561 (1991).
111. F. Day and J. P. Ambrosone, J. Am. Ceram. Soc., 34, 163-164 (1951).
112. Technical University of Berlin (TUB), Glass, 69, 58-60 (1992).
113. K. Kato and N. Araki, J. Non-Cryst. Solids, 80, 681-687 (1986).
114. A. G. Clare, A. Kucuk, D. R. Wing and L. E. Jones, The measurement of the density and surface tension of glass melts using the sessile drop method, in High temperature glass melt property database for process modelling, T. P. Seward, III and T. Vascott, eds., The American Ceramic Society, Westerville, pp. 119-130 (2005).
115. D. A. Weirauch, The surface tension of glass-forming melts, in Properties of glass-forming melts, L. D. Pye, and A. Montenero, I. Joseph, eds., Taylor and Francis Publications, Boca Raton, pp. 143-192 (2005).
116. A. Kucuk, A. G. Clare and L. Jones, Glass Technol., 40, 149-153 (1999).
117. R. G. Newton, Glass Technol., 26, 21-35 (1985).
118. R. H. Doremus, in Treatise on materials science and technology, Vol. 17 M. Tomozawa and R. H. Doremus, eds., Academic Press, New York, pp. 41-69 (1979).
119. A. Paul, J. Mater. Sci., 12, 2246-2268 (1977).
120. T. Geisler, A. Janssen, J. Berndt and A. Putnis, A new model for nuclear waste borosilicate glass alteration, Presented at the MRS Fall Meeting, Boston, USA, December (2008).
121. J.-M. Combes and D. Sachot, US Patent 5, 656, 559 (1997).
122. B. Yale, A. F. Mason, P. Shorrock and N. A. Edwards, European Patent EP0516354A1 (1992).
123. C. M. Jantzen, J. B. Pickett, K. G. Brown and T. B. Edwards, US Patent 5, 846, 278 (1998).
124. G. Bonetti, Riv. Staz. Sper. Vetro, 26, 5-15 (1996).
125. C. W. Sinton and W. C. LaCourse, Mater. Res. Bull., 36, 2471-2479 (2001).
126. T. Lakatos and B. Simmingsköld, Glasteknisk. Tidskr., 27, 77-80 (1972).
127. G. Bonetti, Riv. Staz. Sper. Vetro, 27, 111-125 (1997).
128. M. L. Huggins and K. H. Sun, J. Am. Ceram. Soc., 26, 4-11 (1943).
129. K. S. Hong, S. W. Lee and R. E. Speyer, J. Am. Ceram. Soc., 76, 605-608 (1993).
130. T. D. Taylor and K. C. Rowan, J. Am. Ceram. Soc., 66, C227-C228 (1983).
131. M. L. Froberg, US Patent 4, 358, 304 (1982).
132. J. C. Alexander, US Patent 5, 578, 102 (1996).
133. F. G. West-Oram, Glass Technol., 20, 222-245 (1979).
134. M. Cable and M. Q. Siddiqui, Glass Technol., 21, 193-198 (1980).
135. W. H. Manring and A. R. Conroy, Glass Ind., 49, 199-203 (1968).
136. UK Environment Agency (UKEA), Specification for flat glass cullet used in flat glass manufacture, London, UK (2008).
137. K. K. Éidukyavichus, V. R. Matseikene, V. V. Balkyavichus, A. A. Shpokauskas, A. A. Laukaitis and L. Y. Kunskaite, Glass Ceram., 61, 77-80 (2004).
138. B. Noble and M. Marshall, Glass, 84, 16-18 (2007).
139. P. Bertuzzi, P. Ercole, C. Ferrero and G. Balan, Glass Mach. Plants Acc., 6, 158-161 (2006).
140. British Standards Institute (BSI) Standard 2975:1988, Methods for sampling and analysis of glass-making sands, London, (1988).
141. V. V. Mirkovich, J. Canad. Ceram. Soc., 44, 43-47 (1975).
142. W. Ohnemuller and A. Solf, US Patent 3, 967, 974 (1976).
143. H. ZurStrassen and E. Rauschenfels, US Patent 4, 047, 968 (1977).
144. G. H. Fairchild and J. A. Hockman, US Patent 6, 287, 997 (2001).
145. G. P. Tomaino and J. A. Hockman, US Patent 6, 420, 289 (2002).
146. J. Hockman, Bull. Am. Ceram. Soc., 84, 9101-9103 (2005).
147. J. Place, Glasteknisk. Tidskr., 31, 69-70 (1976).
148. M. M. Bhuiyan and M. Cable, Glass Technol., 6, 206-212 (1965).
149. F. V. Tooley, Raw materials, in Handbook of glass manufacture, Edition 3, Section 2, F. V. Tooley, ed., Ashlee Publishing Co. Inc., New York, (1984), pp. 19 to 56-11.
150. E. Kazazoglu, G. Albayrak and A. Yaraman, Glastech. Ber., 56 K, 19-24 (1983).
151. P. A. Bingham, Reformulation of container glass for energy efficiency, Ref. 2002-6-32-1-3, Carbon Trust, London, UK, (2003).
152. K. A. Shahid and F. P. Glasser, Phys. Chem. Glasses, 13, 27-42 (1972).
153. G. W. Morey, J. Am. Ceram. Soc., 13, 714-717 (1930).
154. H. R. Swift, J. Am. Ceram. Soc., 30, 170-174 (1947).
155. R. Jordán-Hernández, N. Vega-Sánchez, M. E. Zayas-Saucedo, H. Arizpe-Chávez, C. Diaz and J. M. Rincón, Bull. Am. Ceram. Soc., 84, 9301-9304 (2005).
156. W. Simpson, Glass Technol., 17, 35-40 (1976).
157. N. Marriott, M. Orhon, E. Akmoran, T. Gun, C. Cabuk, S. Jones and S. Materowski, Glass Technol. Eur. J. Glass Sci. Technol. A., 48, 280-296 (2007).
158. P. Frolow and G. H. Frischat, Glastech. Ber., 66, 143-150 (1993).
159. R. K. McBerthy, Glass Ind., 9, 215 (1928).
160. G. W. Morey, J. Am. Ceram. Soc., 13, 718-724 (1930).
161. W. B. Silverman, J. Am. Ceram. Soc., 22, 378-384 (1939).
162. W. B. Silverman, J. Am. Ceram. Soc., 23, 274-281 (1940).
163. A. K. Lyle, W. Horak and D. E. Sharp, J. Am. Ceram. Soc., 19, 142-147 (1936).
164. Owens-Illinois Glass Company General Research Laboratory, J. Am. Ceram. Soc., 33, 181-186 (1950).
165. S. Sen and F. V. Tooley, J. Am. Ceram. Soc., 38, 175-177 (1955).
166. Y. Tang and G. H. Frischat, Glastech. Ber. Glass Sci. Technol., 68, 213-221 (1995).
167. B. R. Franklin and L. C. Klein, Bull. Am. Ceram. Soc., 62, 209-210 (1983).
168. P. Stevenson, Glass, 68, 500-501 (1991).
169. G. W. Morey, J. Am. Ceram. Soc., 15, 457-475 (1932).
170. G. E. Walker, J. Soc. Glass Technol., 29, 38T-47T (1945).
171. R. S. Allison and W. E. S. Turner, J. Soc. Glass Technol., 38, 297T-365T (1954).
172. Owens-Illinois Glass Company General Research Laboratory, J. Am. Ceram. Soc., 31, 8-14 (1948).
173. A. R. Conroy, W. H. Manring and W. C. Bauer, Glass Ind., 47, 84-89 (1966).
174. W. H. Manring, D. D. Billings, A. R. Conroy and W. C. Bauer, Glass Ind., 48, 374-380 (1967).
175. J. Kloužek, M. Arkosiová, L. Nmec and P. Cinibusová, Glass Technol. Eur. J. Glass Sci. Technol. A., 48, 176-182 (2008).
176. A. Smrček, Glass Sci. Technol., 78, 173-184 (2005).
177. A. Smrček, Glass Sci. Technol., 78, 230-244 (2005).
178. R. E. Loesell and W. R. Lester, Glass Ind., 42, 623-629 (1961).
179. L. E. Stadler and D. Cronin, Glass Ind., 58, 10-33 (1977).
180. L. E. Stadler and D. Cronin, Glass Ind., 59, 10-13 (1978).
181. K. A. Landa, L. Landa, A. V. Longobardo and S. V. Thomsen, US Patent 6, 672, 108 (2004).
182. V. Gottardi, B. Locardi and G. Paoletti, Riv. Staz. Sper. Vetro, 4, 9-14 (1974).
183. R. Guy, Bull. Cent. Glass Ceram. Res. Int., 8, 79-80 (1961).
184. H. Römer, W. Kiefer, D. Köpsel, P. Nass, E. Rodek, U. Kolberg and T. Pfeiffer, US Patent 6, 698, 244 (2004).
185. K. Papadopoulos, Phys. Chem. Glasses, 14, 60-65 (1973).
186. M. Ooura and T. Hanada, Glass Technol., 39, 68-73 (1998).
187. P. A. Bingham and R. J. Hand, Mater. Res. Bull., 43, 1679-1693 (2008).
188. R. L. Lehman and W. H. Manring, Glass Ind., 58, 16-18 (1977).
189. P. Del Gaudio, H. Behrens and J. Deubener, J. Non-Cryst. Solids, 353, 223-236 (2007).
190. R. F. Bartholemew, Water in glass, in Treatise on materials science and technology, Vol. 22, Glass III, M. Tomozawa and R. H. Doremus, eds., Academic Press, New York, (1982).
191. F. Geotti-Bianchini and L. De Riu, Glastech. Ber. Glass Sci. Technol., 71, 230-242 (1998).
192. F. Geotti-Bianchini, J. T. Brown, A. J. Faber, H. Hessenkemper, S. Kobayashi and I. H. Smith, Glastech. Ber. Glass Sci. Technol., 72, 145-152 (1999).
193. J. Deubener, R. Müller, H. Behrens and G. Heide, J. Non-Cryst. Solids, 330, 268-273 (2003).
194. F. Geotti-Bianchini and L. De Riu, Glastech. Ber. Glass Sci. Technol., 68, 228-240 (1995).
195. R. G. C. Beerkens, Glastech. Ber. Glass Sci. Technol., 68, 369-380 (1995).
196. K. E. Spear and M. D. Allendorf, J. Electrochem. Soc., 149, B551-B559 (2002).
197. Owens-Illinois Glass Company General Research Laboratory, J. Am. Ceram. Soc., 27, 369-372 (1944).
198. A. Smrček, Glass Sci. Technol., 78, 287-294 (2005).
199. Owens-Illinois Glass Company General Research Laboratory, J. Am. Ceram. Soc., 25, 61- 69 (1942).
200. K. D. Kim, Glass Technol., 41, 161-164 (2000).
201. Owens-Illinois Glass Company General Research Laboratory, J. Am. Ceram. Soc., 31, 1-8 (1948).
202. L. G. Johansson, Glasteknisk. Tidskr., 31, 37-42 (1976).
203. W. Simpson, Glass, 66, 475-476 (1989).
204. D. E. King, F. J. Pern, J. R. Pitts, C. E. Bingham and A. W. Czandema, Record IEEE Photovoltaic Specialists Conf., pp. 1117-1120, (1997).
205. D. Chia, B. Caudle, G. R. Atkins and M. P. Brungs, Glass Technol., 41, 165-168 (2000).
206. P. M. DiBello, Glass Technol., 30, 160-165 (1989).
207. R. G. C. Beerkens, J. Am. Ceram. Soc., 86, 1893-1899 (2003).
208. H. Müller-Simon, J. Bauer and P. Baumann, Glastech. Ber. Glass Sci. Technol., 74, 283-291 (2001).
209. E. Guadagnino and O. Corumluǒglu, Glastech. Ber. Glass Sci. Technol., 73, 18-27 (2000).
210. L. J. Shelestak and M. Arbab, Glass Sci. Technol., 78, 255-260 (2005).
211. J. V. Jones and E. N. Boulos, US Patent 5, 521, 128 (1996).
212. E. N. Boulos and J. V. Jones, US Patent 6, 408, 650 (2002).
213. O. Knapp, Keram. Rundschau, 39, 601-603 (1931).
214. Owens-Illinois Glass Company General Research Laboratory, J. Am. Ceram. Soc., 25, 401-408 (1942).
215. P. A. Bingham, Glass Technol., 45, 255-258 (2004).
216. M. Krauss, A. Lenhart, H. Ratka and U. Kircher, Glastech. Ber. Glass Sci. Technol., 68, 278-284 (1995).
217. A. G. Amrheim, J. J. Hammel and L. J. Shelestak, US Patent 4, 270, 945 (1981).
218. T. Westerlund, L. Hatakka and K. H. Karlsson, J. Am. Ceram. Soc., 66, 574-579 (1983).
219. L. Hatakka and K. H. Karlsson, Glass Technol., 27, 17-20 (1986).
220. Y. B. Peng, X. Lei and D. E. Day, Glass Technol., 32, 123-130 (1991).
221. M. M. Khaimovich and K. Y. Subbotin, Glass Ceram., 62, 109-112 (2005).
222. M. M. Khaimovich, Glass Ceram., 62, 381-382 (2005).
223. G. A. Pecoraro, L. J. Shelestak and R. Markovic, US Patent 6, 878, 652 (2005).
224. P. A. Bingham, Glass, 80, 336 (2003).
225. K. Bingham, Ceram. Sci. Eng. Proc., 3, 186-191 (1982).
226. M. C. Patrick and G. H. Bowden, Glass Technol., 3, 52-58 (1962).