Analytical prediction model for fatigue crack propagation and delamination growth in Glare

International Journal of Fatigue

Volumn 29, Issue 4, 2007, Pages 628-646

  Alderliesten, R C ^a  

^a Delft University of Technology   (Netherlands)

Author keywords

Crack growth; Delamination growth; Fatigue; Fibre metal laminates; Glare

Indexed keywords

CRACK PROPAGATION; DELAMINATION; FATIGUE OF MATERIALS; INTERFACES (MATERIALS); LAMINATES; STRESS INTENSITY FACTORS;

DELAMINATION GROWTH; FIBER LAYERS; FIBRE METAL LAMINATES;

GLARE;

EID: 33845625682     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2006.07.006     Document Type: Article

References (42)

1. Vlot A. Towards technology readinessof fibre metal laminates - GLARE Technology Development 1997-2000. In: Proceedings of the 22nd international congress of aeronautical sciences, Harrogate, United Kingdom; 2000. p. 1-15.
2. Vlot A., and Gunnink J.W. Fibre metal laminates, an introduction (2001), Kluwer Academic Publishers., Dordrecht, The Netherlands
3. ® structures. PhD Thesis, Delft University of Technology, Delft; 2004. Available from http://www.library.tudelft.nl/dissertations.
4. Toi R. An empirical crack growth model for fiber/metal laminates. In: Proceedings of the 18th symposium of the international committee on aeronautical fatigue, Melbourne, Australia; 1995. p. 899-909.
5. Takamatsu T., Matsumura T., Ogura N., Shimokawa T., and Kakuta Y. Fatigue crack growth properties of a GLARE3-5/4 fiber/metal laminate. Eng Fract Mech 63 (1999) 253-272
6. Takamatsu T, Matsumura T, Ogura N, Shimokawa T, Kakuta Y. Fatigue crack growth of a GLARE3-5/4 Fiber/metal laminate and validity of methods for analysing results. In: Proceedings of the 20th symposium international committee on aeronautical fatigue, Bellevue Washington, USA; 1999. p. 841-60.
7. Takamatsu T., Shimokawa T., Matsumura T., Miyoshi Y., and Tanabe Y. Evaluation of fatigue crack growth behaviour of GLARE3 fiber/metal laminates using compliance method. Eng Fract Mech 70 (2003) 2603-2616
8. Cox BN. Life Prediction for bridged fatigue cracks. In: Johnson WS, Larsen JM, Cox BN, editors. Life prediction methodology for titanium matrix composites, ASTM STP 1253, ASTM; 1996. p. 552-72.
9. Guo Y.J., and Wu X.R. A phenomenological model for predicting crack growth in fiber-reinforced metal laminates under constant-amplitude loading. Compos Sci Technol 59 (1999) 1825-1831
10. Roebroeks GHJJ. Towards Glare, The development of a fatigue insensitive and damage tolerant aircraft material. PhD Thesis, Delft University of Technology; 1991.
11. ® laminates: measurement of the effect of crack-tip shielding from crack bridging. Eng Fract Mech 32 (1989) 361-377
12. Macheret J., Teply J.L., and Winter E.F.M. Delamination shape effects in aramid-epoxy-aluminum (ARALL) laminates with fatigue cracks. Polym Compos 10 5 (1989) 322-327
13. Macheret Y, Bucci RJ, Nordmark GE, Kipp TR. Failure analysis of aramid fiber reinforced aluminum laminates with surface and through thickness fatigue cracks, vol. 1203, ASTM Special Technical Publication; 1993. p. 171-87.
14. Lin C.T., and Kao P.W. Effect of fiber bridging on the fatigue crack propagation in carbon fiber-reinforced aluminium laminates. Mater Sci Eng A190 (1995) 65-73
15. de Koning AU. Analysis of the fatigue crack growth behaviour of "through the thickness" cracks in fibre metal laminates. Report NLR-CR-2000-575, National Aerospace Laboratory NLR; 2000 [restricted].
16. Bouwman VP, de Koning AU. Fatigue crack growth methodology of 'through the thickness' cracks in fiber metal laminates. Report NLR-CR-2003-032, National Aerospace Laboratory NLR; 2000 [restricted].
17. Kim J.H., and Lee S.B. Calculation of stress intensity factor using weight function method for a patched crack with a debonding region. Eng Fract Mech 67 (2000) 303-310
18. Rose L.R.F. Crack reinforcement by distributed springs. J Mech Phys Solids 35 (1987) 383-405
19. Cox B.N., and Rose L.R.F. A self-consistent approximation for crack bridging by elastic/perfectly plastic ligaments. Mech Mater 22 (1996) 249-263
20. Marissen R. Fatigue crack growth in ARALL, a hybrid aluminium-aramid composite material, crack growth mechanisms and quantitative predictions of the crack growth rate. PhD Thesis, Delft University of Technology; 1988.
21. Marissen R. Fatigue crack growth predictions in Aramid Reinforced Aluminum Laminates (ARALL). In: Proceedings of congress of the international council of the aeronautical sciences; 1986. p. 801-7.
22. Marissen R. Fatigue crack growth predictions in Aramid Reinforced ALuminum Laminates (ARALL). J Aircraft 25 2 (1988) 135-140
23. Guo Y.J., and Wu X.R. A theoretical model for predicting fatigue crack growth rates in fibre-reinforced Metal Laminates. Fatigue Fract Eng Mater Struct 21 (1998) 1133-1145
24. Guo Y.J., and Wu X.R. Bridging stress distribution in center-cracked fiber reinforced metal laminates: modelling and experiment. Eng Fract Mech 63 (1999) 147-163
25. Wu X.J., and Cheng S.M. Trans ASME J Appl Mech 66 (1999) 95-100
26. Wu XJ. A higher-order theory for fiber-metal laminates. In: Proceedings of the 23rd international congress on aeronautical sciences, Toronto, Canada; 2002.
27. Yeh J.R. Fracture Mechanics of delamination in Arall laminates. Eng Fract Mech 30 (1988) 827-837
28. Yeh J.R. Fatigue crack growth in fiber-metal laminates. Int J Solids Struct 32 (1995) 2063-2075
29. Burianek DA. Mechanics of fatigue damage in titanium-graphite hybrid laminates. PhD Thesis, Massachusetts Institute of Technology; 2001.
30. Burianek DA. Interacting damage modes in titanium-graphite hybrid laminates. In: Proceedings of the 13th international conference on composite materials, Beijing, China; 2001.
31. Shim D.J., Alderliesten R.C., Spearing S.M., and Burianek D.A. Fatigue crack growth prediction in GLARE hybrid laminates. Compos Sci Technol 63 (2003) 1759-1767
32. Antonelli V, de Rijck JJM. Initial study on crack growth modelling of FML with FE-analysis. TNO Report 020530168-VA; 2002 [restricted].
33. Suiker A.S.J., and Fleck N.A. Crack tunnelling and plane-strain delamination in layered solids. Int J Fract 125 1 (2004) 1-32
34. Alderliesten R.C. On the available relevant approaches for fatigue crack propagation prediction in Glare. Int J Fatigue (2006) 10.1016/j.ijfatigue.2006.03.003
35. Alderliesten RC. Fatigue crack propagation and delamination growth in Glare. PhD Thesis, Delft University of Technology, Delft; 2005. Available from http://www.library.tudelft.nl/dissertations.
36. Alderliesten RC, Vlot A. Fatigue Crack Growth Mechanism of Glare, Proceedings of the 22nd International SAMPE Europe Conference, Paris, France, 2001;41-52.
37. Alderliesten R.C., Hagenbeek M., Homan J.J., Hooijmeijer P.A., De Vries T.J., and Vermeeren C.A.J.R. Fatigue and damage tolerance of glare. Appl Compos Mater 10 4-5 (2003) 223-242
38. Alderliesten R.C. Application of the energy release rate approach for delamination growth in Glare. Eng Fract Mech 73 6 (2006) 697-709
39. Paris P.C., and Erdogan F. A critical analysis of crack propagation laws. Trans ASME Series D 85 (1963) 528-535
40. Elber W. The significance of fatigue crack closure damage tolerance in aircraft structures. ASTM STP 486 (1971) 230-242
41. Ewalds H.L., and Wanhill R.J.H. Fracture mechanics (1989), Delft University Press
42. Tada H., Paris P.C., and Irwin G.R. The stress analysis of cracks handbook. 3rd ed. (2000), The American Society of Mechanical Engineers