Microstructure and tribological properties of AlCoCrFeNiTi0.5 high-entropy alloy in hydrogen peroxide solution

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 45, Issue 1, 2014, Pages 201-207

  Yu, Y ^a   Liu, W M ^b   Zhang, T B ^a   Li, J S ^a   Wang, J ^a   Kou, H C ^a   Li, J ^c  

^a NORTHWESTERN POLYTECHNICAL UNIVERSITY   (China)

^b LANZHOU INSTITUTE OF CHEMICAL PHYSICS   (China)

^c WUHAN RESEARCH INSTITUTE OF MATERIALS PROTECTION   (China)

Author keywords

[No Author keywords available]

Indexed keywords

1CR18NI9TI STAINLESS STEEL; ANNEALING PROCESS; COEFFICIENT OF FRICTIONS; COMPLEX CONSTRUCTION; HIGH ENTROPY ALLOYS; INTERDENDRITE; TESTING CONDITIONS; TRIBOLOGICAL PROPERTIES;

ANNEALING; CERAMIC MATERIALS; ENTROPY; HYDROGEN PEROXIDE; MICROSTRUCTURE; PEROXIDES; SILICON CARBIDE; TRIBOLOGY; WEAR RESISTANCE; ZIRCONIUM ALLOYS;

ALLOYS;

EID: 84891626227     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-013-1982-6     Document Type: Conference Paper

References (36)

1. M. Ventura and P. Mullens: 35th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. Exhibit, American Institute of Aeronautics and Astronautics (AIAA), Los Angeles, CA, 1999, pp. 2880-92.
2. M. Ventura, E. Wernimont, S. Heister, and S. Yuan: 43th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. Exhibit, American Institute of Aeronautics and Astronautics (AIAA), Los Angeles, CA, 2007, vol. 5468, pp. 54-68.
3. C.Q. Yuan, J. Li, C.L. Dong, and X.P. Yan: Wear, 2011, vol. 271, pp. 1617-22.
4. R. Gostowski: Thermochim. Acta, 2003, vol. 404, pp. 279-81.
5. J. Li, S. Hu, D. Wang, X.M. Sun, and J. Li: Mater. Prot., 2009, vol. 42, pp. 7-9.
6. Y.G. Shi, H.C. Kou, H.T. Duan, T.B. Zhang, J.S. Li, R. Hu, and J. Li: Tribology, 2011, vol. 31, pp. 381-87.
7. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, and S.Y. Chan: Adv. Eng. Mater., 2004, vol. 6, pp. 299-303.
8. W.Y. Tang and J.W. Yeh: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1479-86.
9. S. Singh, N. Wanderka, B.S. Murty, U. Glatzel, and J. Banhart: Acta Mater., 2011, vol. 59, pp. 182-90.
10. M.H. Chuang, M.H. Tsai, W.R. Wang, S.J. Lin, and J.W. Yeh: Acta Mater., 2011, vol. 59, pp. 6308-17.
11. C.J. Tong, M.R. Chen, S.K. Chen, J.W. Yeh, T.T. Shun, S.J. Lin, and S.Y. Chang: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1263-71.
12. Q.H. Li, T.M. Yue, Z.N. Guo, and X. Lin: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1767-78.
13. H. Duan, Y. Wu, M. Hua, C. Yuan, D. Wang, J. Tu, H. Kou, and J. Li: Wear, 2013, vol. 297, pp. 1045-51.
14. J.M. Wu, S.J. Lin, J.W. Yeh, S.K. Chen, Y.S. Huang, and H.C. Chen: Wear, 2006, vol. 261, pp. 513-19. (Pubitemid 44278993)
15. M.H. Chuang, M.H. Tsai, C.W. Tsai, N.H. Yang, S.Y. Chang, J.W. Yeh, S.K. Chen, and S.J. Lin: J. Alloy Compd., 2013, vol. 551, pp. 12-18.
16. M.H. Tsai, H. Yuan, G. Cheng, W. Xu, W.W. Jian, M.H. Chuang, C.C. Juan, A.C. Yeh, S.J. Lin, and Y. Zhu: Intermetallics, 2013, vol. 33, pp. 81-86.
17. Y.J. Zhou, Y. Zhang, Y.L. Wang, and G.L. Chen: Appl. Phys. Lett., 2007, vol. 90, pp. 1-3.
18. Y.Y. Chen, T. Duval, U.D. Hung, J.W. Yeh, and H.C. Shih: Corros. Sci., 2005, vol. 47, pp. 2257-79. (Pubitemid 40992519)
19. Y. Yu, F.Q. Xie, T.B. Zhang, H.C. Kou, R. Hu, and J.S. Li: Rare Met. Mater. Eng., 2012, vol. 41, pp. 862-86.
20. K.H. Zum Gahr, R. Blattner, D.H. Hwang, and K. Pöhlmann: Wear, 2001, vol. 250, pp. 299-310. (Pubitemid 33053065)
21. H. Chen, Y.F. Zhang, and C.X. Ding: Wear, 2002, vol. 253, pp. 885-93. (Pubitemid 35280931)
22. M.T. Constantine and E.F.C. Cain: Hydrogen Peroxide Handbook, Final Report, Air Force Rocket Propulsion Laboratory Research (AFRPL), Edwards, CA, 1967, p. 165.
23. C. Li and M.J. Li: J. Raman Spectrosc., 2002, vol. 33, pp. 301-08.
24. M. Scherge, D. Shakhvorostov, and K. Pöhlmann: Wear, 2003, vol. 255, pp. 395-400. (Pubitemid 36964979)
25. S.Z. Wen and P. Huang: Principles of Tribology, 4th ed., Tsinghua Press, Beijing, 2012, p. 226.
26. H.F. Sheng, M. Gong, and L.M. Peng: Mater. Sci. Eng., A, 2013, vol. 567, pp. 14-20.
27. Y.P. Wang, B.S. Li, and H.Z. Fu: Adv. Eng. Mater., 2009, vol. 11, pp. 641-44.
28. J. Zhou, Y. Zhang, T.N. Kim, and G.L. Chen: Mater. Lett., 2008, vol. 62, pp. 2673-76.
29. A. Manzoni, H. Daoud, S. Mondal, S. van Smaalen, R. Völkl, U. Glatzel, and N. Wanderka: J. Alloy Compd., 2013, vol. 552, pp. 430-36.
30. C.Y. Hsu, T.S. Sheu, J.W. Yeh, and S.K. Chen: Wear, 2010, vol. 268, pp. 653-59.
31. M. Chen, B. Hallstedt, and L.J. Gauckler: Solid State Ionics, 2004, vol. 170, pp. 255-74.
32. C. Madivate, A.M. Malate, S. Verryn, and M. Loubser: B. Chem. Soc. Ethiopia, 2004, vol. 18, pp. 73-80.
33. N.K. Myshkin, M.I. Petrokovets, and A.V. Kovalev: Tribol. Int., 2005, vol. 38, pp. 910-12. (Pubitemid 41679831)
34. F.P. Bowden and D. Tabor: The Friction and Lubrication of Solids, 1st ed., Clarendon Press, Oxford, United Kingdom, 1964, p. 544.
35. A. Kubota, M. Yoshimura, S. Fukuyama, C. Iwamoto, and M. Touge: Precis. Eng., 2012, vol. 36, pp. 137-40.
36. J. Xu and K. Kato: Wear, 2000, vol. 245, pp. 61-75.