Hilbert Transform Applications in Mechanical Vibration

Hilbert Transform Applications in Mechanical Vibration

Volumn , Issue , 2011, Pages

  Feldman, Michael ^a  

^a TECHNION ISRAEL INSTITUTE OF TECHNOLOGY   (Israel)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84891580399     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781119991656     Document Type: Book

References (210)

1. Adamopoulos, P., Fong, W., and Hammond, J.K. (1988) Envelope and Instantaneous PhaseCharacterisation of Nonlinear System Response. Proc. of the VI Int. Modal Analysis Conf.
2. Agneni, A., and Balis-Crema, L. (1989). Damping measurements from truncated signals viaHilbert transform. Mechanical Systems and Signal Processing, 3 (1), 1-13.
3. Andrade, M.A., Messina, A.R., Rivera, C.A., and Olguin, D. (2004) Identification of instantaneousattributes of torsional shaft signals using the Hilbert transform. IEEE Transactionson Power Systems, 19 (3), 1422-1429.
4. Andronov, A.A., Vitt, A.A., and Khaikin, S.E. (1966) Theory of Oscillators, Pergamon Press.
5. Anishchenko, V.S., Astakhov, V., Neiman, A., et al. (2007) Nonlinear Dynamics of Chaoticand Stochastic Systems, Springer, Berlin, Heidelberg.
6. Antonino-Daviu, J.A., Riera-Guasp, M., Roger-Folch, J., and Perez, R.B. (2007) An AnalyticalComparison Between DWT and Hilbert-Huang-Based Methods for the Diagnosis of RotorAsymmetries in Induction Machines. Industry Applications Conference, 42nd IAS AnnualMeeting, IEEE.
7. Attoh-Okine, N., Barner, K., Bentil, D., and Zhang, R. (2008) The empirical mode decompositionand the Hilbert-Huang transform. Journal on Advances in Signal Processing, 2008,(Article ID 251518), pp. 1-2.
8. Babitsky, V.I., and Krupenin, V.L. (2001) Vibration of Strongly Nonlinear DiscontinuousSystems, Springer.
9. Bedrosian, E. (1963) A product theorem for Hilbert transforms. Proceedings of the IEEE, 51 (5), 868-869.
10. Bellizzi, S., Guillemain, P., and Kronland-Martinet, R. (2001) Identification of coupled nonlinearmodes from free vibration using time-frequency representations. Journal of Soundand Vibration, 243 (2), 191-213.
11. Bendat, J.S. (1985) The Hilbert Transform and Applications to Correlation Measurements,Bruel & Kjaer, Denmark.
12. Bernal, D., and Gunes, B. (2000) An Examination of Instantaneous Frequency as a DamageDetection Tool. 14th Engineering Mechanics Conference (EM2000), the American Societyof Civil Engineers, Austin, TX.
13. Boashash, B. (1992) Estimating and interpreting the instantaneous frequency-Part 1: Fundamentals. Proceedings of the IEEE, 80 (4), 520-538.
14. Boller, C., Chang, F.-K., and Fujino, Y. (eds) (2009) Encyclopedia of Structural Health Monitoring,Wiley.
15. Braun, S.G. (ed.) (1986) Mechanical Signature Analysis: Theory and Applications, AcademicPress, New York.
16. Braun, S., and Feldman, M. (1997) Time-frequency characteristics of non-linear systems. Mechanical Systems and Signal Processing, 11 (4), 611-620.
17. Braun, S., and Feldman, M. (2011) On the decomposition of nonstationary signals: someaspects of the EMD and HVD methods. Mechanical Systems and Signal Processing, 25 (5).
18. Brennan, M.J.,Kovacic, I.,Carrella,A., andWaters, T.P. (2008) On the jump-up and jump-downfrequencies of the Duffing oscillator. Journal of Sound and Vibration, 318, 1250-1261.
19. Broman, H. (1981) The instantaneous frequency of a Gaussian signal: The one-dimensionaldensity function. Acoustics, Speech and Signal Processing IEEE Transactions on, 29 (1),108-111.
20. Browne, T.J., Vittal, V., Heydt, G.T., & Messina, A.R. (2009) Practical application of Hilberttransform techniques in identifying inter-area oscillations, in A.R.Messina (ed.), Inter-areaOscillations in Power Systems, Springer, pp. 101-125.
21. Bruns, J.-U., Lindner, M., and Popp, K. (2003), Identification of the nonlinear restoring forcecharacteristic of a rubber mounting. Proceedings in Applied Mathematics and Mechanics,2, 270-271.
22. Bucher, I. (2011) Transforming and separating rotating disk vibrations using a sensor array. Journal of Sound and Vibration, 330 (6), 1244-1264.
23. Bucher, I., and Ewins, D.J. (1997) Multi-dimensional decomposition of time-varying vibrationresponse signals in rotating machinery. Mechanical Systems and Signal Processing, 11 (4),577-601.
24. Bucher, I., Feldman, M., Minikes, A., and Gabay, R. (2004) Real-time traveling waves andwhirl decomposition, Proc. of the VIII Int. Vibrations in RotatingMachinery, The Institutionof Mechanical Engineers.
25. Bunimovich, V.I. (1951) Fluctuating Processes in Radio Receivers (in Russian), Soviet Radio,Moscow.
26. Caciotta,M., Giarnetti, S., Leccese, F., and Leonowicz, Z. (2009) Detection of Short Transientsand Interruptions Using the Hilbert Transform. XIX IMEKOWorld Congress Fundamentaland Applied Metrology, IMEKO, Lisbon, Portugal.
27. Cain, G.D., Lever, K.V., and Yardim, A. (1998) Probability density functions of amplitudemodulated random signals. Electronics Letters, 34 (16), 1560-1561.
28. Cantrell, C.D. (2000) Modern Mathematical Methods for Physicists and Engineers, CambridgeUniversity Press.
29. Chen, Y., and Feng, M.Q. (2003) A technique to improve the empirical mode decompositionin the Hilbert-Huang transform. Earthquake Engineering and Engineering Vibration, 2 (1),75-85.
30. Chen, T.-L., Que, P.-W., Zhang, Q., and Liu, Q.-K. (2005) Ultrasonic signal identification byempirical mode decomposition and Hilbert transform. Review of Scientific Instruments, 76 (8), 1-6.
31. Chopra, A.K. (2007) Dynamics of Structures: Theory and Applications to Earthquake Engineering,Pearson Prentice Hall.
32. Claerbout, J.F. (1976) Fundamentals of Geophysical Data Processing, McGraw-Hill,New York.
33. Cohen, L. (1989) Time-frequency distributions-a review. Proceedings of the IEEE, 77 (7),941-980.
34. Cohen, L., and Lee, C. (1989) Standard Deviation of Instantaneous Frequency. InternationalConference ICASSP-89, IEEE, Glasgow, UK.
35. Cohen, L., and Loughlin, P. (2003) Authors' reply. Signal Processing, 83, 1821-1822.
36. Cohen, L., Loughlin, P., and Vakman, D. (1999) On an ambiguity in the definition of theamplitude and phase of a signal. Signal processing, 79, 301-307.
37. Curadelli, R.O., Riera, J.D., Ambrosini, D., and Amania, M.G. (2008) Damage detection bymeans of structural damping identification. Engineering Structures 30, 30, 3497-3504.
38. Daetig, M., and Schlurmann, T. (2004) Performance and limitations of the Hilbert-Huangtransformation (HHT) with an application to irregular water waves. Ocean Engineering, 31,1783-1834.
39. Davidson, K.L., and Loughlin, P.J. (2000) Instantaneous spectral moments. Journal of theFranklin Institute, 337, 421-436.
40. Davies, P., and Hammond, J.K. (1987) The Use of Envelope and Instantaneous PhaseMethodsfor the Response of Oscillatory Nonlinear Systems to Transients. Proc. of the 5th IMAC.
41. Douka, E., and Hadjileontiadis, L.J. (2005) Time-frequency analysis of the free vibrationresponse of a beam with a breathing crack. NDT & E International, 38 (1), 3-10.
42. Dragomir, S.S. (2005) Reverses of the triangle inequality in Banach spaces. Journal of Inequalitiesin Pure and Applied Mathematics, 6 (5), 77-99.
43. Du, Q., and Yang, S. (2007) Application of the EMD method in the vibration analysis of ballbearings. Mechanical Systems and Signal Processing, 21 (6), 2634-2644.
44. Elizalde, H., and Imregun, M. (2006) An explicit frequency response function formulation formulti-degree-of-freedom non-linear systems. Mechanical Systems and Signal Processing,20, 1867-1882.
45. Eret, P., and Meskell, C. (2008) A practical approach to parameter identification for a lightlydamped, weakly nonlinear system. Journal of Sound and Vibration, 310, 829-844.
46. Ewins, D.J. (1984) Modal Testing: Theory, Practice and Application, Research Studies Press,Ltd.
47. Fang, X., Luo, H., and Tang, J. (2008) Investigation of granular damping in transient vibrationsusing Hilbert transform based technique. Journal of Vibration and Acoustics, 130 (3), 1-11.
48. Fan, X., and Zuo, M.J. (2007) Gearbox fault feature extraction using Hilbert transform, Stransform,and a statistical indicator. Journal of Testing and Evaluation, 35 (5), 477-485.
49. Feeny, B.F. (2008) A complex orthogonal decomposition for wave motion analysis. Journalof Sound and Vibration, 310, 77-90.
50. Feldman, M.S. (1985) Investigation of the natural vibrations of machine elements using theHilbert transform. Soviet Machine Science, 2, 44-47.
51. Feldman, M. (1991) Device and method for determination of vibration system modal parameters. Patent, 098985, Israel, Israel.
52. Feldman, M. (1994a) Non-linear system vibration analysis using Hilbert transform-I. Free vibrationanalysismethod "FREEVIB". Mechanical Systems and Signal Processing, 119-127.
53. Feldman, M. (1994b) Non-linear system vibration analysis using Hilbert transform-II. Forced vibration analysis method "FORCEVIB". Mechanical Systems and Signal Processing,309-318.
54. Feldman, M. (1997) Non-linear free vibration identification via the Hilbert transform. Journalof Sound and Vibration, 208 (3), 475-489.
55. Feldman, M. (2001) Hilbert transforms, in Encyclopedia of Vibration (eds D. Ewins, S. Braun,and S. Rao), Academic Press, New York.
56. Feldman, M. (2005) Time-Varying and Non-Linear Dynamical System Identification Using theHilbert Transform. 20th Biennial Conference on Mechanical Vibration and Noise, ASME,Long Beach, CA.
57. Feldman, M. (2006) 'Time-varying vibration decomposition and analysis based on the Hilberttransform. Journal of Sound and Vibration, 295 (3-5), 518-530.
58. Feldman, M. (2007a) Considering high harmonics for identification of nonlinear systems byHilbert transform. Mechanical Systems and Signal Processing, 21 (2), 943-958.
59. Feldman, M. (2007b) Identification of weakly nonlinearities in multiple coupled oscillators. Journal of Sound and Vibration, 303, 357-370.
60. Feldman, M. (2008a) MATLAB® (Executable) Programs for the Hilbert Vibration Decomposition,viewed 2010, http://hitech.technion.ac.il/feldman/HT decomposition.zip.
61. Feldman, M. (2008b) Theoretical analysis and comparison of the Hilbert transform decompositionmethods. Mechanical Systems and Signal Processing, 22 (3), 509-519.
62. Feldman, M. (2009a) Analytical basics of the EMD: Two harmonics decomposition. MechanicalSystems and Signal Processing, 23 (7), 2059-2071.
63. Feldman, M. (2009b) Hilbert transform, envelope, instantaneous phase and frequency, inEncyclopedia of Structural Health Monitoring (eds C. Boller, F.-K. Chang, and Y Fujino),John Wiley & Sons Ltd.
64. Feldman, M. (2010) MATLAB Programs for the HT Identification, viewed 2010,http://hitech.technion.ac.il/feldman/HT identification.zip.
65. Feldman, M. (2011) Hilbert transform in vibration analysis. Mechanical Systems and SignalProcessing, 25 (3), 735-801.
66. Feldman, M., and Braun, S. (1993) Analysis of TypicalNon-LinearVibration Systems by Usingthe Hilbert Transform. Proc. of the XI Int. Modal Analysis Conf., Kissimmee, Florida.
67. Feldman, M., and Seibold, S. (1999) Damage diagnosis of rotors: application of Hilberttransformand multi-hypothesis testing. Journal of Vibration and Control, 5, 421-445.
68. Fidlin, A. (2005) Nonlinear Oscillations in Mechanical Engineering, Springer, Berlin,Heidelberg.
69. Fink, L.M. (1966) Relations between the spectrum and instantaneous frequency of a signal. Problemy Peredachi Informatsii, 2 (4), 26-38.
70. Fink, D. (1975) Coherent detection signal-to-noise. Applied Optics, 14 (3), 689-690.
71. Flandrin, P., Rilling, G., and Goncalves, P. (2004) Empirical mode decomposition as a filterbank. IEEE Signal Processing Letters, 11 (2), 112-114.
72. Franchetti, P., and Modena, C. (2009) Nonlinear damping identification in precast prestressedreinforced concrete beams. Computer-Aided Civil and Infrastructure Engineering, 24,577-592.
73. Gabor, D. (1946) Theory of communication. Journal of the Institution of Electrical Engineers,93 (3), 429-457.
74. Gendelman, O.V., Starosvetsky, Y., and Feldman, M. (2008) Attractors of harmonically forcedlinear oscillator with attached nonlinear energy sink I: Description of response regimes. Nonlinear Dynamics, 51 (1-2), 31-46.
75. Gianfelici, F., Biagetti, G., Crippa, P., and Turchetti, C. (2007) Multicomponent AM-FM representations: an asymptotically exact approach. IEEE Transactions On Audio, Speech,and Language Processing, 15 (3), 823-837.
76. Giorgetta, F., Gobbi, M., and Mastinu, G. (2007) On the testing of vibration performances ofroad vehicle suspensions. Experimental Mechanics, 47 (4), 485-495.
77. Girolami, G., and Vakman, D. (2002) Instantaneous frequency estimation and measurement: aquasi-local method. Measurement Science and Technology, 13, 909-917.
78. Gloth, G., and Sinapius, M. (2004) Analysis of swept-sine runs during modal identification. Mechanical Systems and Signal Processing, 18, 1421-1441.
79. Goge, D., Sinapius, M., Fullekrug, U., and Link, M. (2005) Detection and description of nonlinearphenomena in experimental modal analysis via linearity plots. International Journalof Non-Linear Mechanics, 40, 27-48.
80. Goswami, J.C., and Hoefel, A.E. (2004) Algorithms for estimating instantaneous frequency. Signal Processing, 84, 1423-1427.
81. Gottlieb, O., and Feldman, M. (1997) Application of a Hilbert transform-based algorithm forparameter estimation of a nonlinear ocean system roll model. Journal of OffshoreMechanicsand Arctic Engineering, 119 (4), 239-243.
82. Gottlieb, O., Feldman, M., and Yim, S.C.S. (1996) Parameters identification of nonlinearocean mooring systems using the Hilbert transform. Journal of offshore mechanics andArctic engineering, 118 (1), 29-36.
83. Gravier, B.M., Napal, N.J., Pelstring, J.A., et al. (2001) An Assessment of the Application ofthe Hilbert Spectrum to the Fatigue Analysis of Marine Risers. Proceedings of the Eleventh(2001) International Offshore and Polar Engineering Conf., The International Society ofOffshore and Polar Engineers, Stavanger, Norway.
84. Grimaldi,M., and Cummins, F. (2008) Speaker identification using instantaneous frequencies. IEEE Transactions on Audio, Speech, and Language Processing, 16 (6), 1-97-1111.
85. Guo, D., and Peng, Z.K. (2007) Vibration analysis of a cracked rotor using Hilbert-Huangtransform. Mechanical Systems and Signal Processing, 21, 3030-3041.
86. Hahn, S.L. (1996a) Hilbert Transforms in Signal Processing, Artech House.
87. Hahn, S.L. (1996b) The Hilbert transform of the product a(t)cos(omega ot + phi o). Bulletinof the Polish Academy of Sciences Technical Sciences, 44 (1), 75-80.
88. Hammond, J.K. (1968) On the response of single and multidegree of freedom systems tononstationary excitations. Journal of Sound and Vibration, 7, 393-419.
89. Hammond, J.K., and Braun, S. (1986) Additional techniques, in Mechanical Signature Analysis,(ed. S. Braun), Academic Press, London.
90. Hartmann, W. (1998) Signal, Sound and Sensation, American Institute of Physics.
91. Herlufsen, H. (1984) Technical Review: "Dual Channel FFT Analysis (Part II)", Brüel & Kjaer.
92. Hertz, D. (1986) Time delay estimation by combining efficient algorithms and generalizedcross-correlationmethods. IEEE Transactions on Acoustics, Speech, and Signal Processing, ASSP-34 (1), 1-7.
93. Hogan, J.A., and Lakey, J.D. (2005) Time-frequency and time-scale methods: Adaptive Decompositions,Uncertainty Principles, and Sampling, Birkhauser, Boston.
94. Ho, D. and Randall, R.B. (2000) Optimization of bearing diagnostic techniques using similatedand actual bearing fault signals, Mechanical Systems and Signal Processing, 14 (5),763-788.
95. Huang, D. (2003) Practical implementation of the Hilbert-Huang transform algorithm. ActaOceanologica Sinica, 25 (1), 1-11.
96. Huang, N., and Shen, S. (eds.) (2005) Hilbert-Huang transform and its applications, in InterdisciplinaryMathematical Sciences (Interdisciplinary Mathematical Sciences), WorldScientific.
97. Huang, N.E., Shen, Z., and Long, S.R. (1999) New view of nonlinear water waves: the Hilbertspectrum. Annual Review of Fluid Mechanics, 31, 417-457.
98. Huang, N.E., Shen, Z., Long, S.R., et al. (1998) The empirical mode decomposition and theHilbert spectrum for nonlinear and non-stationary time series analysis. Proceedings of theRoyal Society of London. Series A., 454 (1971), 903-995.
99. Huang, N.E., and Wu, Z. (2008) A review on Hilbert-Huang transform: Method and itsapplications to geophysical studies. Reviews of Geophysics, 46, pp. 1-23.
100. Huang, N.,Wu, Z., Long, SR., et al. (2009) On instantaneous frequency. Advances in AdaptiveData Analysis, 1 (2), 177-229.
101. Hu, H.F., Staszewski, W.J., Hu, N.Q., et al. (2010) Crack detection using nonlinear acousticsand piezoceramic transducers-instantaneous amplitude and frequency analysis. SmartMaterials and Structures, 19, 1-10.
102. Hutchinson, J.W., and Wu, T.Y. (1996) Advances in Applied Mechanics, Academic Press, Inc.
103. Inaudi, J.A., and Kelly, J.M. (1995) Linear hysteretic damping and the Hilbert transform. Journal of Engineering Mechanics, 121, 626-632.
104. Inman, D.J. (1994) Engineering Vibration, Prentice Hall.
105. Johansson, M. (1999) The Hilbert Transform, viewed 2010, http://w3.msi.vxu.se/exarb/mjex.pdf.
106. Jones, J. (2009) Embedded algorithms within an FPGA to classify nonlinear single-degree-offreedomsystems. Sensors Journal, IEEE, 9 (11), 1486-1493.
107. Kaiser, J.F. (1990) On Teager's Energy Algorithm and its Generalization toContinuous Signals. Proc. IEEE Digital Signal Process. Workshop, New Paltz, NY.
108. Kendig, R.P. (1997) Algorithm to Count Fatigue Cycles. Proceedings-National-Conferenceon-Noise-Control-Engineering, Inst of Noise Control Engineering, NY.
109. Kerschen, G., Vakakis, A.F., Lee, Y.S., et al. (2008) Toward a fundamental understanding ofthe Hilbert-Huang transform in nonlinear structural dynamics. Journal of Vibration andControl, 14 (1-2), 77-105.
110. Kerschen, G., Worden, K., Vakakis, A.F., and Golinval, J.-C. (2006) Past, present and futureof nonlinear system identification in structural dynamics. Mechanical Systems and SignalProcessing, 20 (3), 505-592.
111. Kijewski-Correa, T., and Kareem, A. (2006) Efficacy of Hilbert and Wavelet transforms fortime-frequency analysis. Journal of Engineering Mechanics, 132 (10), 1037-1049.
112. King, F.W. (2009) Hilbert Transforms: (Encyclopedia of Mathematics and Its Applications),Cambridge University Press, Cambridge.
113. Kizhner, S., Blank, K., Flatley, T., et al. (2006) On Certain Theoretical Developments Underlyingthe Hilbert-Huang Transform. Aerospace Conference, IEEE.
114. Korpel, A. (1982) Gabor: frequency, time, and memory. Applied Optics, 21 (20), 3624-3632.
115. Kovesi, P. (1999) Image features from phase congruency. A Journal of Computer VisionResearch, 1 (3), 1-26.
116. Kultyshev, A.S. (1990) Envelope, frequency, and phase representation in terms of a family ofoscillations. Measurement Techniques, 33 (8), 839-842.
117. Laila, D.S., Larsson, M., Pal, B.C., and Korba, P. (2009) Nonlinear Damping Computation andEnvelope Detection using Hilbert Transform and its Application to Power Systems WideArea Monitoring. IEEE Power & Energy Society General Meeting, PES '09.
118. Laila, D.S., Messina, A.R., and Pal, B.C. (2009) A refined Hilbert-Huang transform withapplications to inter area oscillation monitoring. IEEE Transactions On Power Systems, 24 (2), 610-620.
119. Lai,Y.-C., andYe, N. (2003) Recent developments in chaotic time series analysis. InternationalJournal of Bifurcation and Chaos, 13 (6), 1383-1422.
120. Lang, Z.Q., and Billings, S.A. (2005) Energy transfer properties of nonlinear systems in thefrequency domain. International Journal of Control, 78, 354-362.
121. Lee, C.W., and Han, Y.-S. (1998) Use of Directional Wigner Distribution for Identificationof the Instantaneous Whirling Orbit in Rotating Machinery. The Seventh InternationalSymposium on Transport Phenomena and Dynamics of Rotating Machinery.
122. Lee, Y.S., Vakakis, A.F., McFarland, D.M., and Bergman, L.A. (2010) Non-linear systemidentification of the dynamics of aeroelastic instability suppression based on targeted energytransfers. The Aeronautical Journal, 114 (1152), 61-82.
123. Liang, J.. Chaudhuri, S.R., and Shinozuka, M. (2007) Simulation of nonstationary stochasticprocesses by spectral representation. Journal of Engineering Mechanics, 133 (6), 616-627.
124. Li,H., Deng, X., and Dai, H. (2007) Structural damage detection using the combination methodof EMD and wavelet analysis. Mechanical Systems and Signal Processing, 21 (1), 298-306.
125. Lin, S., Yang, J., and Zhou, L. (2005) Damage identification of a benchmark building forstructural health monitoring. Smart Materials and Structures, 14, 162-169.
126. Liu, S., Messina, A.R., and Vittal, V. (2004) Characterization of Nonlinear Modal Interactionusing Normal Forms and Hilbert Analysis. Proc. of 2004 IEEE PES Power SystemsConference & Exposition New York, New York.
127. Liu, B., Riemenschneider, S., and Xu, Y. (2006) Gearbox fault diagnosis using empiricalmode decomposition and Hilbert spectrum. Mechanical Systems and Signal Processing, 20,718-734.
128. Loughlin, P.J., and Tacer,B. (1997) Comments on the interpretation of instantaneous frequency. IEEE Signal Processing Letters, 4 (5), 123-125.
129. Luo, H., Fang, X., and Ertas, B. (2009) Hilbert transform and its engineering applications. AIAA Journal, 47 (4), 923-932.
130. Lyons, R. (2000) Quadrature Signals: Complex, But Not Complicated, viewed. (2010) http://www.elektronikschule.de/~krausg/DSP/Dsp CD/Quadrature Signal Tutorial/quadsig.htm.
131. Lyons, R.G. (2004) Understanding Digital Signal Processing, Prentice Hall.
132. MacDonald, J.R., and Brachman, M.K. (1956) Linear-system integral transform relations. Reviews of Modern Physics, 28 (4), 393-422.
133. Mai, E.C., Sugeng, Y.P., Pei, J.S., et al. (2008) Design and Testing of Small Timber Modelsto Demonstrate Nonlinear Dynamics. International Modal Analysis Conference (IMAC XXVI), Orlando, FL.
134. Makris,N. (1999) Frequency-independent dissipation and causality, in Computational StochasticMechanics (ed. P. Spanos), Balkema, Rotterdam, pp. 435-442.
135. Manske, R.A. (1968) Computer simulation of narrowband systems. IEEE Transactions onComputers, C-17 (4), 301-308.
136. Mercier, M.J., Garnier, N.B., and Dauxois, T. (2008) Reflection and diffraction of internalwaves analyzed with the Hilbert transform. Physics of Fluids, 20 (8), 086601-086610.
137. Messina, A.R. (ed.) (2009) Inter-area Oscillations in Power Systems: A Nonlinear and NonstationaryPerspective, Springer US.
138. Migulin, V.V., Medvedev, V.Y., Mustel, E.R., and Parigin, V.N. (1983) Basic Theory of Oscillations,Mir Publishers, Moscow.
139. Minikes, A.. Gabay, R.. Bucher, I, and Feldman, M. (2005) On the sensing and tuning ofprogressive structural vibration waves. IEEE Transactions on Ultrasonics, Ferroelectricsand Frequency Control, 52 (9), 1565-1576.
140. Mitra, S.K., and Kaiser, J.F. (1993) Handbook for Digital Signal Processing, John Wiley & Sons.
141. Nayfeh, A.H. (1979) Nonlinear Oscillations, Wiley-Interscience.
142. Nho, W., and Loughlin, P.J. (1999) When is instantaneous frequency the average frequency ateach time? IEEE Signal Processing Letters, 6 (4), 78-80.
143. Pai, P.F. (2007) Nonlinear vibration characterization by signal decomposition. Journal of Soundand Vibration, 307, 527-544.
144. Pai, P.F., and Hu, J. (2006) Nonlinear Vibration Characterization by Signal Decomposition. IMAC-XXIV Conference and Exposition on Structural Dynamics, St. Louis, Missouri.
145. Pai, P., Huang, L., Hu, J., and Langewisch, D. (2008) Time-frequency method for nonlinearsystem identification and damage detection. Structural Health Monitoring-an InternationalJournal, 7 (2), 103-127.
146. Pai, P.F., and Palazotto, A.N. (2008) Detection and identification of nonlinearities by amplitudeand frequency modulation analysis. Mechanical Systems and Signal Processing, 22,1107-1132.
147. Pandey, J.N. (1996) The Hilbert Transform of Schwartz Distributions and Applications, JohnWiley & Sons, New York.
148. Pei, J.-S., and Piyawat, K. (2008) Deterministic excitation forces for simulation and identificationof nonlinear hysteretic SDOF systems. Journal of Engineering Mechanics, 134 (1),35-48.
149. Perry, P., and Brazil, T. (1997) Hilbert-transform-derived relative group delay. IEEE Transactionson Microwave Theory and Techniques, 45 (8), 1214-1225.
150. Pines, D.J., and Salvino, L.W. (2006) Structural damage detection using empirical modedecomposition and HHT. Journal of Sound and Vibration, 294, 97-124.
151. Plakhtienko, N.P. (2000) Methods of identification of nonlinear mechanical vibrating systems. International Applied Mechanics, 36 (12).
152. Poon, C.W., and Chang, C.C. (2007) Identification of nonlinear elastic structures using empiricalmode decomposition and nonlinear normal modes. Smart Structures and Systems, 3 (2), 423-437.
153. Potamianos, A., and Maragos, P. (1994) A comparison of the energy operator and the Hilberttransform approach to signal and speech demodulation. Signal Processing, 37, 95-120.
154. Putland, G.R., and Boashash, B. (2000) Can a Signal be BothMonocomponent andMulticomponent? Third Australasian Workshop on Signal Processing Applications (WoSPA 2000),Brisbane.
155. Qian, T. (2006) Mono-components for decomposition of signals. Mathematical Methods inthe Applied Sciences, 29 (10), 1187-1198.
156. Quek, S.T., Tua, P.S., and Wang, Q. (2003) Detecting anomalies in beams and plate basedon the Hilbert-Huang transform of real signals. Smart Materials and Structures, 12, 447-460.
157. Randall, R.B. (1986) Hilbert Transform Techniques in Machine Diagnostics, IFToMM InternationalConference on Rotordynamics, Tokyo.
158. Raman, S., Yim, S.C.S., and Palo, P.A. (2005) Nonlinear model for sub-and superharmonicmotions of a MDOF moored structure, Part 1-system identification. Journal of OffshoreMechanics and Arctic Engineering, 127, 283-290.
159. Rilling, G., and Flandrin, P. (2008) One or two frequencies? the empirical mode decompositionanswers. IEEE Transactions on Signal Processing, 56 (1), 85-95.
160. Rosenblum, M.G. (1993) A characteristic frequency of chaotic dynamical system. Chaos,Solutions & Fractals, 3 (6), 617-626.
161. Rosenblum, M.G., Pikovsky, A.S., and Kurths, J. (1996) Phase synchronization of chaoticoscillators. Physical Review Letters, 76, 1804-1807.
162. Ruzzene, M. (2007) Frequency-wavenumber domain filtering for improved damage visualization. Smart Materials and Structures, 16, 2116-2129.
163. Salvino, L.W. (2000) Empirical Mode Analysis of Structural Response and Damping. InternationalModal Analysis Conference, Proc. IMAC-XVIII: A Conference on StructuralDynamics, Society for Experimental Mechanics, Bethel, Conn., San Antonio.
164. Salvino, L.W., Pines, D.J., Todd, M., and Nichols, J. (2005) EMD and instantaneous phasedetection of structural damage, in Hilbert-Huang Transform: Introduction and Applications(ed. N. Huang and S. Chen), World Scientific Publishing.
165. Savitzky, A., and Golay, M.J.E. (1964) Smoothing and differentiation of data by simplifiedleast-squares procedures. Analytical Chemistry, 36 (8), 1627-1639.
166. Schreier, P.J., and Scharf, L.L. (2010) Statistical Signal Processing of Complex-Valued Data:The Theory of Improper and Noncircular Signals, Cambridge University Press.
167. Sharpley, R.C., and Vatchev, V. (2006) Analysis of the intrinsic mode functions. Constructive Approximation, 24 (1), 17-47.
168. Shi, Z.Y., and Law, S.S. (2007) Identification of linear time-varying dynamical systems usingHilbert transform and empirical mode decomposition method. Journal of Applied Mechanics,74 (2), 223-230.
169. Shin, K., and Hammond, J. (2008) Fundamentals of Signal Processing for Sound and VibrationEngineers, John Wiley & Sons, Ltd.
170. Simon, M., and Tomlinson, G.R. (1984) Use of the Hilbert transform in modal analysis oflinear and non-linear structures. Journal of Sound and Vibration, 96 (4), 421-436.
171. Smith, C.B., and Wereley, N.M. (1999) Nonlinear damping identification from transient data. AIAA Journal, 37 (12), 2-19.
172. Starosvetsky, Y., and Gendelman, O.V. (2008) Attractors of harmonically forced linear oscillatorwith attached nonlinear energy sink. II: Optimization of a nonlinear vibration absorber. Nonlinear Dynamics, 51 (1-2), 47-57.
173. Starosvetsky, Y., and Gendelman, O.V. (2010) Interaction of nonlinear energy sink with a twodegrees of freedom linear system: Internal resonance. Journal of Sound and Vibration, 329 (10), 1836-1852.
174. Suzuki, H., Ma, F., Izumi, H., et al. (2006) Instantaneous frequencies of signals obtained bythe analytic signal method. Acoustical Science and Technology, 27 (3), 163-170.
175. Ta,M.-N., and Lardies, J. (2006) Identification of weak nonlinearities on damping and stiffnessby the continuous wavelet transform. Journal of Sound and Vibration, 293, 16-37.
176. Teager, H.M. (1980) Some observations on oral air flow during phonation. IEEE Trans. Acoust. Speech Signal Process, ASSP-28, 599-601.
177. Therrien, C. (2002) The Lee-Wiener Legacy. A history of the statistical theory of communication. IEEE Signal Processing Magazine, 19 (6), 33-44.
178. Thomas, T.G., and Sekhar, S.C. (2005) Communication Theory, Tata Mcgraw Hill Publihsers.
179. Thrane, N., Wismer, J., Konstantin-Hansen, H., and Gade, S. (1984) Application Note. Practicaluse of the Hilbert transform, Technical Review No. 3, viewed 2010, http://www. bksv.com/pdf/Bo0437.pdf.
180. Titchmarsh, E.C. (1948) Introduction to the Theory of Fourier Integrals, Clarendon Press.
181. Tjahjowidodo, T., Al-Bender, F., and Van Brussel, H. (2007) Identification of Backlash inMechanicalSystems Experimental dynamic identification of backlash using skeleton methods. Mechanical Systems and Signal Processing, 21, 959-972.
182. Tomlinson, G.R. (1987) Developments in the use of the Hilbert transform for detecting andquantifying non-linearity associated with frequency response functions. Mechanical Systemsand Signal Processing, 1 (2), 151-171.
183. Tomlinson, G.R., and Ahmed, I. (1987) Hilbert transform procedures for detecting and quantifyingnon-linearity in modal testing. Meccanica, 22 (3), 123-132.
184. Turner, C. (2009) An Efficient Analytic Signal Generator. IEEE Signal Processing Magazine,26 (3), 91-94.
185. Vainshtein, L.A., and Vakman, D.E. (1983) Frequency Separation in the Theory of Vibrationand Waves (in Russian), Nauka, Moscow.
186. Vakman, D. (1996) On the analytic signal, the Teager-Kaiser energy algorithm, and othermethods for defining amplitude and frequency. IEEE Transactions on Signal Processing, 44 (4), 792-797.
187. Vakman, D. (1998) Signals, Oscillations, and Waves, Artech House, Boston, London.
188. Vakman, D. (2000) New high precision frequency measurement. Measurement Science andTechnology, 11 (10), 1493-1497.
189. Vakman, D.E., and Vainshtein, L.A. (1977) Amplitude, phase, frequency-fundamental conceptsof Oscillation theory. Soviet Physics-Uspekhi, 20 (12), 1002-1016.
190. Veltcheva, A., Cavaco, P., and Soares, C.G. (2003) Comparison of methods for calculation ofthe wave envelope. Ocean Engineering, 30, 937-948.
191. Wallace, D.A., and Darlow, M.S. (1988) Hilbert transform techniques for measurement oftransient gear. Mechanical Systems and Signal Processing, 2 (2), 187-194.
192. Wang, L., Zhang, J., Wang, C., and Hu, S. (2003) Time-frequency analysis of nonlinearsystems: the skeleton linear model and the skeleton curves. Transactions of the ASME, 125,170-177.
193. Weaver, W., Timoshenko, S.P., and Young, D.H. (1990) Vibration Problems in Engineering,John Wiley.
194. Wei, D., and Bovik, A.C. (1998) On the instantaneous frequencies of multicomponent AM-FM signals. IEEE Signal Processing Letters, 5 (4), 84-86.
195. Wetula, A. (2008) A Hilbert Transform Based Algorithm for Detection of a Complex Envelopeof a Power Grid Signals-an Implementation. Electrical Power Quality & Utilization-Journal + Magazine, XIV (2), 13-18.
196. Whitaker, J.C. (2005) The Electronics Handbook, CRC Press.
197. Worden, K., and Manson, G. (1998) Random vibrations of a Duffing oscillator using theVolterra series. Journal of Sound and Vibration, 217 (4), 781-789.
198. Worden, K., and Tomlinson, G.R. (2001) Nonlinearity in Structural Dynamics: Detection,Identification, and Modelling, IOP Publishing Ltd, Bristol, United Kingdom.
199. Wu, Z. (2008) The module that performs EMD/EEMD, viewed December 2010, http://rcada.ncu.edu.tw/research1 clip program.htm.
200. Wu, Z., andHuang, N.E. (2004)Astudy of the characteristics ofwhite noise using the empiricalmode decomposition method. Proceedings of the Royal Society A, 460, 1597-1611.
201. Wu, Z., and Huang, N.E. (2009) Ensemble empirical mode decomposition: a noise-assisteddata analysis method. Advances in Adaptive Data Analysis, 1 (1), 1-41.
202. Wu, F., and Qu, L. (2008) An improved method for restraining the end effect in empiricalmode decomposition and its applications to the fault diagnosis of large rotating machinery. Journal of Sound and Vibration, 314 (3-5), 586-602.
203. Yang, J.-N. (1972) Simulation of random envelope processes. Journal of Sound and Vibration, 21 (1), 73-85.
204. Yang, J.N., Kagoo, P.K., and Lei, Y. (2000) Parametric Identification of Tall Buildings UsingAmbient Wind Vibration Data. The 8th ASCE Specialty Conference on ProbabilisticMechanics and Structural Reliability, University of Notre Dame, Notre Dame, Indiana.
205. Yang, L., Lei, Y., Lin, S., and Huang, N. (2004) Hilbert-Huang based approach for structuraldamage detection. Journal of Engineering Mechanics, 130 (1), 85-95.
206. Yang, J.N., Lei, Y., Pan, S., and Huang, N. (2003a) Identification of linear structures based onHilbert-Huang transform. Part 1: normal modes. Earthquake Engineering and StructuralDynamics, 32 (9), 1443-1467.
207. Yang, J.N., Lei, Y., Pan, S., and Huang, N. (2003b) Identification of linear structures based onHilbert-Huang transform. Part 2: complex modes. Earthquake Engineering and StructuralDynamics, 32 (10), 1533-1554.
208. Yang, B., and Suh, C.S. (2004a) Interpretation of crack-induced rotor non-linear responseusing instantaneous frequency. Mechanical Systems and Signal Processing, 18, 491-513.
209. Yang, B., and Suh, C.S. (2004b) On the characteristics of bifurcation and nonlinear dynamicresponse. Journal of Vibration and Acoustics, 126 (4), 574-579.
210. Yu, D., Cheng, J., and Yang, Y. (2005) Application of EMD method and Hilbert spectrumto the fault diagnosis of roller bearings. Mechanical Systems and Signal Processing, 19,259-270.