Composite materials: Properties as influenced by phase geometry

Composite Materials: Properties as Influenced by Phase Geometry

Volumn , Issue , 2005, Pages 1-259

  Nielsen, Lauge Fuglsang ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84891480887     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/3-540-27680-7     Document Type: Book

References (190)

1. Paul, B.: "Prediction of elastic constants of multi-phase materials". Trans. of the Metallurgical Soc. of AIME, 218(1960), 36-41.
2. Hansen, T.C.: "Creep of concrete: A discussion of some fundamental problems". Bulletin no. 33(1958), Svenska Forskningsinstitutet för Cement och Betong, Tekniska Högskolan, Stockholm".
3. Hashin, Z. and Shtrikman, S.: "Variational approach to the theory of elastic behavior of multi-phase materials". J. Mech. Solids, 11(1963), 127-140.
4. Hashin, Z.: "Elastic moduli of heterogeneous materials". J. Appl. Mech., 29(1962), 143-150.
5. Hill, R.: "Elastic properties of reinforced solids: Some theoretical principles". J. Mech. Phys. Solids, 11(1963), 357-372.
6. Christoffersen, J.: "Elastic and elastic-plastic composites-a new approach, DCAMM Rep. 61(1973) (Danish Centre for Applied Mathematics and Mechanics, Tech. Univ. Denmark, Copenhagen.
7. Levin, V.M.: "Determination of effective elastic moduli of composite materials", Sov. Phys.-Dokl., 20(1975), 147.
8. G.P. Sendeckyj (ed): "Mechanics of composite materials", Vol. II in "Composite materials" (edited by Broutman, L.J. and R.H. Krock), Academic Press, New York, 1974.
9. Chow, T.S.: "The effect of particle shape on the mechanical properties of filled polymers" (review), Journ. Materials Science, Vol. 15(1980), pp. 1873-1888.
10. Halpin, J.C. and N.J. Pagano. 1970. Stiffness and Expansion Estimates for oriented and random fibrous composites. AFML-TR-69-341.
11. Mori, T. and Tanaka, K.: "Average stress in matrix and average energy of materials with misfitting inclusions", Acta Metallica, 21(1973), 571-574.
12. Benveniste, Y.: "A new approach to the application of Mori-Tanaka's theory in composite materials", Mechanics Mater., 6(1987), 147-157.
13. Budiansky, B.: "On the elastic moduli of some heterogeneous materials". J. Mech. Phys. Solids, 13(1965), 223-227.
14. Stang, Henrik: "En kompositmaterialeteori og dens anvendelse til beskrivelse af trakp?avirkede cementkompositter" (in danish, "A composite theory and its application to cement based composites subjected to tension"), Thesis, Institute of Structural Mechanics, Tech. Univ. Denmark, 1984.
15. Reiter, T., Dvorak, G.J., and Tvergaard, V.: "Micromechanical models for graded composite materials", J. of the Mechanics and Physics of Solids, 45(1997), 1281-1302.
16. Reiter, T. and Dvorak, G.J.: "Micromechanical models for graded composite materials: II. Thermomechanical loading", J. of the Mechanics and Physics of Solids, 46(1998), 1655-1673.
17. Hale, D.K.: "The physical properties of composite materials" (review paper), Journ. Mat. Sc. Vol. 11(1976), pp. 2105-2141.
18. Torquato, S.: "Effective stiffness tensor of composite media: I. Exact series expansions", J. Mech. Phys. Solids, 45(1997), 1421-1448.
19. Idem: "Effective stiffness tensor of composite media: II, Application to isotropic dispersions", J. Mech. Phys. Solids, 46(1998), 1411-1440.
20. Fagerlund, G.: "Samband mellan porositet och materials mekaniske egenskaper" (in swedish, "Relations between porosity and mechanical properties of materials"), Div. Build. Technology, Tech. Univ. Lund, Sweden, 1971.
21. Hasselman, D.P.H.: "Relation between effects of porosity on strength and on Young's modulus of elasticity of polycrystalline materials", J. Am. Ceram. Soc., 46(1963), 564-565.
22. Coble, R.L. and Kingery, W.D.: "Effect of porosity on physical properties of sintered alumina", J. Am. Ceram. Soc., 39(1956), 377-385.
23. Nielsen, L. Fuglsang: "Strength and Stiffness of Porous Materials", Journ. Am. Ceramic Soc., 73(1990), 2684-89.
24. Idem: "Elastic Properties of Two-Phase Materials", Materials Science and Engineering, 52(1982), 39-62.
25. Milton, G.W.: "Composites: A myriad of Microstructure Independent Relations", pp. 443-459 in Proc. (eds. T. Tatsumi, E. Watanabe, T. Kambe) of the XIXth Int. Congr. of Theoretical and Applied Mechanics, Kyoto, Japan, 25-31 August 1996, published by Elsevier 1997.
26. Sigmund, O.: "Materials with prescribed constitutive parameters: An inverse homogenization problem" Int. J. Solids Structures 31(1994), 2313-2229.
27. Idem: "Tailoring materials with prescribed elastic properties", Mechanics of Materials 20(1995), 304-368.
28. Milton, G.W. and Cherkaev, A.V.: "Which elasticity tensors are realizable", J. of Engineering Materials and Technology, 117(1995), 483-493.
29. Agarwal, B.D., Panizza, G.A., and Broutman, L.J.: "Micromechanics analysis of porous and filled ceramic composites", Journ. Am. Ceramic Soc., 54(1971), 620-624.
30. Adams, D.F.: Section D: "Solution techniques" in "Elastoplastic behavior of composites", pp. 169-208 in "Mechanics of Composite Materials", Vol. II in "Composite materials" (edited by Broutman, L.J. and R.H. Krock), Academic Press, New York 1974.
31. Zaitsev, Y.B.: "Crack propagation in a composite material", in "Fracture Mechanics of Concrete", (ed. F.H. Wittmann), Elsevier 1983.
32. Zaitsev, Y.W. and F.H. Wittmann: "Simulation of crack propagation and failure of concrete", Mater. and Struct. 14(1981), 357-365.
33. Tvergaard, V.: "Fibre debonding and breakage in a whisker-reinforced metal", Mat. Sc. & Eng., A190(1995), 215-222.
34. Bentz, D.: "Three-Dimensional Computer Simulation of Portland Cement Hydration and Microstructure Development", J. Am. Ceram. Soc., 80(1997), 3-21.
35. Garboczi, E.J.: "Finite Element and Finite Difference Programs for Computing the Linear Electric and Elastic Properties of Digital Images of Random Materials", Report NISTIR 6269(1998), National Institute of Standards and Technology (NIST), Gaithersburg, Maryland 20899, USA.
36. Bentz, D.P., Garboczi, E.J., Jennings, H.M., and Quenard, D.A.: "Multi-Scale Digital-Image-Based Modelling of Cement-Based Materials", MRS Proceedings, ibid (1995), 33-42.
37. Bendsoe, M.P.: "Methods for the optimization of structural topology, shape and material", Springer Verlag, Berlin, 1995, p. 271.
38. Jacobsen, J.B., Olhoff, N., and Ronholt, E: "Generalized shape optimization of three-dimensional structures using materials with optimum microstructure", Mechanics of Materials, 28(1998), 207-225.
39. Pedersen, P.: "On sensitivity analysis and optimal design of specially orthotropic laminates", Eng. Opt., 11(1987), 305-316.
40. Nielsen, L. Fuglsang: "On strength of porous material-simple systems and densified systems", Materials and Structures, 31(1998), 651-661.
41. Hammerslev, J.M. in Proc. Cambridge Phil. Soc., 53(1957), 642.
42. Stauffer, D. and Aharony, A.: "Introduction to percolation theory", 2nd ed., Taqylor and Francis, London, 1992.
43. Nielsen, L. Fuglsang: "Stiffness and other physical properties of composites as related to phase geometry and connectivity-Part I: Methods of analysis", 3rd Symposium on Building Physics in the Nordic Countries, Copenhagen, Sept. 13.-15. 1993. Proceedings Vol. 2 (Bjarne Saxhof, editor) Thermal Insulation Laboratory, Technical University Denmark, 1993, pp. 725-734.
44. Bentz, D.P.: Modelling cement microstructure: "Pixels, particles, and property prediction", Materials and Structures, Vol. 32(1999), 187-195.
45. Goodier, J.N.: "Concentration of Stress around Spherical and Cylindrical Inclusions and Flaws", J. Appl. Mech., 55(1933), 39.
46. Dewey, J.M.: "The elastic constants of materials loaded with non-rigid fillers", J. Appl. Phys., 18(1947), 578.
47. Landauer, R.: "The electric resistance of binary metallic mixtures", J. Appl. Phys. 23(1952), 779.
48. Böttcher, C.J.F.: "The dielectric constant of crystalline powders", Rec. Trav. Pays-Bas, 64(1945), 47.
49. Bruggeman, D.A.G.: "The calculation of various physical constants of heterogeneous substances, I: The dielectric constants and conductivities of mixtures composed of isotropic substances", Ann. Phys. Lpz., 24(1935), 636.
50. Van Beek, L.K.H.: "Progress in dielectrics", Vol. 7, 69-114, Heywood, London, 1967.
51. Christensen, R.M. and Lo, K.H.: "Solutions for the effective shear properties in three phase sphere and cylinder models", J. Mech. Phys. Solids, 27(1979), 315.
52. Sokolnikoff, J.S.: "Mathematical theory of elasticity", McGraw-Hill, New York, 2nd edn., 1956.
53. Eshelby, J.D.: "The determination of the elastic field of an ellipsoidal inclusion, and related problems", Proc. R. Soc. London, Ser. A, 241(1957), 376-396.
54. Grabovsky, Y., Milton, G.W.: "Exact relations for composites: Towards a complete solution", Documenta Mathematica, Extra Volume ICM III(1998), 623-632.
55. Grabovsky, Y., Milton, G.W., and Sage, D.S.: "Exact relations for effective tensors of composites: Necessary conditions and sufficient conditions", Report November (1998), Department of Mathematics, University of Utah, Salt Lake City, USA.
56. Nielsen, L. Fuglsang: "Shrinkage, Swelling, and Stiffness of Composites-Strain and Stress caused by Hygro-thermal action and Solidification or Freezing of Liquid Impregnant", Bygningsstatiske Meddelelser, 62(1991), 47-78.
57. Idem: "Mechanics of composite material subjected to eigenstress-With special reference to frost resistance of porous brittle material", Danish Building Research Institute, SBI-Bulletin 96(1993).
58. Idem: "Drying of wood, Part I: Stresses caused by drying", ".., Part II: Damage free drying", Bygningsstatiske Meddelelser, 57(1986), p. 73-115.
59. Idem: "Interne Spannungen sowie Schwind-und Temperaturdeformationen des Betons", Cement and Concrete Research, 4(1974), 31-44.
60. Pickett, G.: "Effect of aggregate on shrinkage of concrete", Journ. Am. Concrte Inst., 52(1956), 581.
61. Hansen, T.C. and Nielsen, K.E.C.: "Effect of aggregate properties on concrete shrinkage", Journ. Am. Concrete Inst., 62(1965), 783.
62. Xi, Yunping and Jennings, H.M.: "Shrinkage of cement paste and concrete modelled by a multiscale effective homogeneous theory", Materials and Structures, 30(1997), 329-339.
63. Sendeckyi, G.P.: "Elastic behavior of composites", pp. 46-83 in "Mechanics of Composite Materials", Vol. II in "Composite materials" (edited by Broutman, L.J. and R.H. Krock), Academic Press, New York 1974.
64. Nielsen, L. Fuglsang: "Pore size distribution and shrinkage of porous materials", Report 316(1994), Building Materials Lab., Techn. University of Denmark.
65. Bentz, P.B.: "Modelling drying shrinkage in reconstructed porous materials: Application to porous Vycor glass", Modelling Simul. Mater. Sci. Eng. 6(1998), 211-236.
66. Nielsen, L. Fuglsang: "Rheology of some fluid extreme composites-such as fresh self-compacting concrete", Nordic Concrete Research, 2(2001), 83-93.
67. Geiker, M.R., Brandl, M., Thrane, L. Nyholm, and Nielsen, L. Fuglsang: "Effect of coarse aggregate fraction and shape on the rheological properties of selfcompacting concrete". Cement, Concrete, and Aggregates, Vol. 24, No. 1, June 2002.
68. Budiansky, B. and R.J. O'Connell: "Elastic moduli of a cracked solid", Int. J. Solids Struct., 12(1976), 81-97.
69. Davis, W.E.A.: "The dielectric constants of axially isotropic composite materials", J. Phys. D. 7(1974), 1016-1029.
70. Nielsen, L. Fuglsang: "Finite Element Analysis of two basic Composites", Documentation report R-089(2004), Dept. of Civ. Eng., Technical University of Denmark.
71. Idem: "On the Effect of Defective Phase Contact on the Mechanical Behavior of Particulate Composites like Concrete", Cement and Concrete Research, 12(1982), 685.
72. Hashin, Z.: "Assessment of Self Consistent Scheme approximation: Conductivity of particulate composites", J. Compos. Mater. Vol. 2(1968), 284.
73. Hashin, Z. and Shtrikman, S.: "A variational approach to the theory of the effective magnetic permeability of multiphase materials", J. Appl. Phys. 33(1962), 3125.
74. Bentz, D.P., Jensen, O.M., Coats, A.M., and Glasser, F.P.: "Influence of Silica Fume on diffusivity in cement-based Materials. Part I: Experimental and computer modelling studies on cement pastes", Submitted to Cement and Concrete Research 1999.
75. Delagrave, A., Marchand, J., and Pigeon, M.: "Influence of microstructure on the tritiated water diffusivity of mortars", Adv. Cem. Based Materials, 7(1998), 60-65.
76. Mejlhede Jensen, O.: Chloride ingress in cement paste and mortar measured by Electron Probe Micro Analysis", Report R51(1999), Dept. Struct. Eng. and Materials, Tech. Univ. Denmark.
77. Mills, R. and Lobo, V.M.M.: "Self-diffusion in electrolyte solutions", Elsevier, Amsterdam, (1989), 317.
78. Nielsen, L. Fuglsang: "Strength developments in hardened cement paste-Examination of some empirical equations", Materials and Structures, 26(1993), 255-260.
79. Christensen, B.: "Microstructural studies of hydrating portland cement-based materials using impedance spectroscopy", Ph.D. thesis, Northwestern University (1993).
80. Powers, T. C.: "Fundamental aspects of the shrinkage of concrete" (in german), Die Bauwirtschaft, 15(1961), 344-49.
81. Helmuth, R.A. and D.H. Turk: "Elastic moduli of hardened Portland cement and Tricalcium silicate pastes: Effects of porosity", pp. 135-144 in Symposium on structure of Portland cement and concrete. Highw. Res. Bd., Spec. Rept., No. 90, 1966.
82. Murray et al: "The hot pressing of ceramics", in W.D. Kingery: Ceramic Fabrication Processes, J. Wiley & Sons, New York, 1958.
83. Spriggs, R. M., Brissette, L. A., and Vasilos, T.: "Effect of porosity on elastic and shear moduli of polycrystalline magnesium oxide". J. Am. Ceram. Soc., 45(1962), 400.
84. Nielsen, L. Fuglsang: "Rheology of extreme composites", In "Papers in Structural Engineering and Materials-A Centenary Celebration", 179-187, Dept. of Struct. and Materials, Tech. Univ. Denmark, 2000.
85. Idem: "Rheology of some extreme liquid composites-such as fresh selfcompacting concretes". Nordic Concrete Research, 2(2001), no. 7.
86. Wu, T.T.: "The effect of inclusion shape on the elastic moduli of a two-phase material", Int. J. Solids Structures, 2(1966), 1.
87. Ollivier, J.P. and Massat, M.: Permeability and microstructure of concrete: A review of modeling", Cem. and Concr. Res., 22(1992), 503-514.
88. Hansen, E. dePlace and Schmidt, L.: "Sammenhang mellem porositet og elasticitetsmodul, samt porositet og styrke for teglsten", (in danish, Stiffness and strength of bricks as related to porosity), A students report in Material mechanics (Course 6110), Spring 1988, Build. Mat. Lab., Techn. Univ. Denmark.
89. Knudsen, F.P.: "Effect of porosity on Young's modulus of Alumina", J. Am. Ceram. Soc., 45(1962), 94-95.
90. Konow, Thorborg von: "Restaurering och reparation med puts-och murbruk" (in swedish: Restoration and repair with lime mortars), dr. thesis, ?Abo Akademi University Press, ?Abo, Finland, 1997.
91. Nielsen, Anders: "Porous materials-structure and properties", in "Selected research studies from Scandinavia", pp. 94-103, Report TVBM-3078(1997), Lund Institute of Technology, Div. Building Materials, Lund, Sweden.
92. Idem: "Ny viden om kalk og kalkmortler" (in danish: New knowledge on lime and lime mortars), MAT-NYT 2(1998), Danish Society of Materials Testing and Research, Copenhagen, Denmark.
93. Madsen, D.H., Jeppesen, M.J., and Weidemann, H.C.: " Porestorrelsesfordeling i kalkmortel" (in danish, Pore size distribution in lime mortar). A students report, course 59409, spring 1998, Dept. Struct. Eng. and Materials, (supervisors: Nielsen. A. and Nielsen, L.F.).
94. Hansen, T.C.: "Influence of aggregate and voids on modulus of elasticity of concrete, cement mortar, and cement paste", Proc. Am. Concr. Inst., 62(1965), 193-216.
95. J.J. Beaudoin and R.F. Feldman: "A study of mechanical properties of autoclaved Calcium silicate systems", Cem. Concr. Res., 5(1975), 103-118.
96. R.F. Feldman and J.J. Beaudoin: Studies of composites made by impregnation of porous bodies. I. Sulphur impregnant in Portland cement systems", Cem. Concr. Res., 7(1977), 19-30.
97. Clark, S.P.: "Handbook og physical constants", rev. ed; Memoir 97, The geological Society of America, Inc., New York, 1966.
98. Larsen, E.S. and Nielsen, C.B.: "Decay of bricks due to salt". Materials and Structures, 23(1990), 16-25.
99. Ashby, M.F.: "Materials data", Cambridge Univ. Eng, Dept., 1981.
100. Ishai, O.: "Influence of sand concentration on deformations of mortar beams under low stresses", ACI Journ., Proceedings 58(1961), 611-622.
101. Palmus, L.: "Letklinkerbetons mekaniske egenskaber" (in danish, Mechanical properties of light clinker concrete), M.Sc. thesis, Spring 1996, Dept. Struct. Engineering and Materials, Tech. Univ. Denmark.
102. Hansen, T.C.: "Creep and stress relaxation of concrete", Proc. 31(1960), Swedish Cement and Concrete Res. Ins., Tech. Univ. of Stockholm, Sweden.
103. Idem: "Influence of aggregate and voids on modulus of elasticity of concrete, cement, and cement paste", J. Am. Concr. Inst., Proc. 62(1965), 193.
104. Nielsen, K.E.C.: "Aggregate stresses in concrete", Thesis, Proc. 41(1971), Swedish Cement and Concrete Res. Inst., Tech. Univ. Stockholm, Sweden.
105. Tada, H., Paris, P.C., and Irwin, G.C.: "The Stress Analysis of Cracks Handbook", Del Research Corp., Hellertown, Pa, 1973.
106. Spange, H. and Pedersen, E.S.: "Early age properties of selected concrete", in "High Performance Concrete-The Contractors Technology, HETEK", Report 59(1997), Ministry of Transport, Road Directorate, Denmark.
107. Bentz, D.P.: Modeling cement microstructure: Pixels, particles, and property prediction", Materials and Structures, Vol. 32(1999), 187-195.
108. Lokhorst, S.J. and van Breugel, K.: "Simulation of the effect of geometrical changes of the microstructure on the deformational behavior of hardening concrete", Cement and Concrete Res., Vol. 27(1997), 1465-1479.
109. Nielsen, L. Fuglsang: "Strength developments in hardened cement paste-Examination of some empirical equations", Materials and Structures, 26(1993), 255-260.
110. Corson, P.B.: "Correlation functions for predicting properties of heterogeneous materials, IV: Effective thermal conductivity of two-phase solids", J. Appl. Phys. (USA) 45(1974), 3180.
111. Stephens, E. and Evans, E.J.: "The Hall effect and other properties of copperantimony series of alloys", Phil. Mag. 7(1929), 161.
112. Stephanow, N.J.: "Electrical conductivity of alloys", Z. anorg. u. allgem. Chem. 78(1912), 1.
113. Hirsch, T.J.: "Modulus of elasticity of concrete affected by elastic moduli of cement paste matrix and aggregate", Proc. Am. Concrete Inst., 59(1962), 427.
114. Dougill, J.W.: "Modulus of elasticity of concrete affected by elastic moduli of cement paste matrix and aggregate, Discussion of paper by T.J. Hirsch", Proc. Am. Concrete Inst., 59(1962), 1363.
115. Popovics, S. and Erdey, M.: "Estimation of the modulus of elasticity of concrete-like composite materials", Mat. and Struct. 3(16)(1970), 253-260.
116. Counto, U.J.: "The effect of the elastic modulus of the aggregate on the elastic modulus, creep, and creep recovery of concrete", Mag. Concrete Res., 16(1964), 129.
117. Tanacan, L. and Ersoy, H.Y.: "Mechanical properties of fired clay-perlite as composite material", Journ. Materials in Civil Engineering, February 2000, 55-59.
118. Maxwell, J.C.: Treatise on electricity and magnetism, 1(1873), 365.
119. Böttcher, C.J.F.: "The dielectric constant of crystalline powders", Rec. Trav. Pays-Bas, 64(1945), 47.
120. Nielsen, L. Fuglsang: "Effects of Creep in Uncracked Composite Structures of Steel and Concrete", Bygningsstatiske Meddelelser, 38(1967), 65.
121. Idem: "Rheologishe Eigenschaften für isotrope linear-viscoelastische Kompositmaterialien", Cement and Concrete Research, 3(1973), 751-766.
122. Idem: "New Methods in Practical creep Analysis of Concrete", Seventh Int. Congr. on Rheology, Gothenburg, Sweden 1976. Proc. Chalmers Univ. of Technology, Gothenburg (1976), 98.
123. Idem: "Creep of Concrete under a Multi-Axial State of Stress", Fifth Int. Congr. on Rheology, Kyoto, Japan 1968, Proc. Vol. II, 527, University of Tokyo Press 1970.
124. Idem: "Composite analysis of concrete-Creep, relaxation, and eigenstrain/ stress", in "High Performance Concrete-The Contractors Technology, HETEK", Report 112(1997), Ministry of Transport, Road Directorate, Denmark.
125. Idem: "Time-dependent behavior of concrete-a basic algorithm for FEManalysis", Bygningsstatiske Meddelelser, 70(1999).
126. Flügge, W.: "Viscoelasticity", Blaisdell Publ. Comp., London 1967.
127. Lee, E.H.: "Stress analysis in viscoelastic bodies". Quarterly of Appl. Mathematics, 13(1955), 183.
128. Carslaw, H.S. and J.C. Jaeger: "Operational methods in applied mathematics". Dower, New York, 1963.
129. Erdelyi, A. (ed): "Tables of integral transforms, Bateman Manuscript Project, Vol. 1, McGraw-Hill, New York, 1954.
130. Murray, R.S.: Mathematical handbook, Schaum's Outline Series, McGraw-Hill, Inc., New York, 1968 (31th printing 1993).
131. Bellman, R.E., R.E. Kalaba, and J. Lockett: "Numerical Inversion of the laplace transforms" Am. Elsevier Publ. Comp., New York, 1966.
132. Garbow, B.S., Giunta, G., Lyness, J.N., and Murli, A.: "Software for the implementation of Week's method for the inverse Laplace transformation problem", ACM Trans. Math. Soft., 14(1988), 163-170.
133. Idem: "Algorithm 662. A Fortran software package for the numerical inversion of the Laplace transform based on Week's method", ACM Trans. Math. Soft., 14(1988), 171-176.
134. McHenry, D.: "A new aspect of creep in concrete and its application to design", ASTM Proc., 43(1943), pp. 1069-1084.
135. Alfrey, T.: "Non-Homogeneous Stresses in Viscoelastic Media". Qu. Appl. Math. 2(1944), 113.
136. Nowacki, W.: "Dynamics of elastic systems", Chapman & Hall Ltd, London 1963.
137. Ditlevsen, O.: "Stiffness replacement principle in linear visco-elastic structures", personally communicated research note, Dept. Struct. Eng. and Mat., Tech. Univ. Denmark, 16.05.1996.
138. Nowick, A.S., and Berry, B.S.: "Anelastic relaxation in crystalline solids", Academic Press, New York, 1972.
139. Schwarzl, F.R.: "Numerical calculation of stress relaxation modulus from dynamic data for linear viscoelastic materials", Rheologica Acta, 14(1975), pp. 581-590.
140. Nielsen, L. Fuglsang: "Power Law Creep as Related to Relaxation, Elasticity, Damping, Rheological Spectra and Creep Recovery-With Special Reference to Wood", Conference of Int. Union of Forestry Research Organizations (IUFRO), Xalapa, Mexico, December 1984. Proc., Build. Mat. Lab., Techn. Univ. Denmark 1985, 181-204.
141. Idem: "Material properties determined by vibration analysis", Materialenyt 1(1995), 4-46, Danish Society for Materials Testing and Research (DSM).
142. Idem: "Improved method for complex modulus estimation", Application Note, 1996, Brüel & Kjar A/S, Denmark, (co-authors, N.J. Wismer and S. Gade).
143. Idem: "Further developments in material properties determined by vibration analysis" (co-authors, L.V. Andreasen and M. Seifert), Materialenyt, 3(1996), Danish Society for Materials Testing and Research (DSM).
144. Idem: "An improved method for estimating the dynamic properties of materials", Sound & Vibration, Instrumentation reference issue, February 2000, 20-24, (co-authors, N.J. Wismer and S. Gade).
145. Dossing, O.: "Structural testing, Part I: Mechanical mobility measurement and Structural testing" and "Part II: Modal analysis and simulation", Brüel & Kjar, Narum, Denmark, 1988.
146. Andreasen, L. and Seifert, M.: "Materialeprovning med Svingningsudstyr", M.Sc. thesis, Build. Mat. Lab., Tec. Univ. Denmark, 1995.
147. Nielsen, A.: "Rheology of building materials", thesis, Statens Institut för Byggnadsforskning, Stockholm, Document D6(1972).
148. Nielsen, L. Fuglsang: "Lifetime and residual strength of wood subjected to static and variable load", Holz als Roh-u. Werkstoff, 58(2000), 81-90 and 141-152.
149. Idem: "On the influence of crack closure on strength estimates of wood", Holz als Roh-u. Werkstoff, 62(2004), 81-87.
150. Idem: "On the influence of moisture and load variations on the mechanical behavior of wood", Contribution to the COST-Action E24 workshop on "Reliability based design of timber structures" held in Ljubljana, Slovenia, October 7-8, 2004.
151. Dischinger, F.: "Untersuchungen über die Knicksicherheit, die elastische Verformung und das Kriechen des Betons bei Bogenbrücken", Bauingenieur 1937, 487-520, 539-552, 595-621.
152. Idem: "Elastische und plastische Verformungen der Eisenbetontragwerke und insbesondere der Bogenbrückken", Bauingenieur 1939, 53-63, 286-294, 426-437, 563-572.
153. Nielsen, L. Fuglsang: "Kriechen und Relaxations des Betons", Beton-und Stahlbetonbau, 11(1970), 272-275.
154. Idem: "On the Prediction of Rheological Parameters for Concrete", Nordic Conference on Deformations in Concrete Structures, Copenhagen, march 1980. Proc. DIALOG 1/80(1980), 81, Danish Engineering Academy, Dept. Civ. Eng., Lyngby, Denmark.
155. Idem: "On the Prediction of Creep Functions for Concrete", in "Fundamental Research on Creep and Shrinkage of Concrete" (ed. F. Wittmann), Martinus Nijhoff Publishers, The Hague 1982, 279-289.
156. Idem: "On the applicability of modified Dischinger equations", Cement & Concrete Res., 7(1977), 159-160.
157. CEB-FIP: "Model code for concrete structures", Comité Euro-International du Béton, Paris, 1978.
158. Ross, A.D.: "Creep of concrete under variable stress". ACI journ., Proc. 54(1958), 739-758.
159. Illston, J.M., Dinwoodie, J.M., and Smith, A.A.: "Concrete, Timber, and Metals-the nature and behavior of structural materials", Van Nostrand Reinhold Company, New York, 1979. (Chapter 10 on "Response of Concrete to Stress").
160. Nielsen, L. Fuglsang: "Constitutive equations for concrete", Bygningsstatiske Meddelelser, 45(1974), 65.
161. Idem: "The improved Dischinger method as related to other methods and practical applicability", pp. 169-191 in "Design for Creep and Shrinkage in Concrete Structures", Special Publication SP-76(1982), American Concrete Institute.
162. Trost, H.: "Auswirkungen des Superpositionsprinzips auf Kriech-und Relaxationsprobleme bei Beton und Spannbeton", Beton-und Stahlbetonbau 62(1962), 230-238, 261-269.
163. Bazant, Z.P.: Prediction of Concrete Creep Effects using Age-Adjusted Effective Modulus Method", ACI-Journal, 69(1972), 212-217.
164. Nielsen, L. Fuglsang: "Elasticity and Damping of Porous Materials and Impregnated Materials", Journ. Am. Ceramic Soc., 67(1984), 93-98.
165. Hashin, Z.: "Viscoelastic behavior of heterogeneous media", J. Appl. Mech. (Transaction of the ASME), 1965, 630-636.
166. Idem: "Complex moduli of viscoelastic composites", Int. J. Solids Struct., 6(1970), 539-52 and 6(1970), 797-807.
167. Neville, A.M.: "Creep of concrete as a function of its cement paste content", Mag. Concr. Res., 16(1964), 21.
168. Pickett, G.: "Effect of aggregate on shrinkage of concrete and a hypothesis concerning shrinkage", Proc. Am. Concrete Inst., 52(1956), 581.
169. Markestad, A. and Maage, M.: "Building Materials, Vol. II", (norwegian, Bygningsmateriallare II), textbook, TAPIR, Trondheim, Norway, 1978.
170. L'Hermite, R.G.: "Volume changes of concrete", Chemistry of Cement, 4th Int. Symp., Washington, 1960, p. 659.
171. Rüsch, H.: "Physikalishe Fragen der Betonprüfung". Zement-Kalk-Gips 12 (1954), 27-39.
172. Idem: "Researches towards a general flexural theory for structural concrete, Proceedings of the ACI, 1957, 1.
173. Nielsen, L. Fuglsang: "ComCon (version 1.0)-Software for Composite analysis of concrete (Creep, relaxation, eigenstrain/stress, loss of prestress): Underlying theory and documentation", Report I-21, Dept. Struct. Eng. and Materials, Tech. Univ. Denmark, 1999.
174. Mullit, Paw: "ComCon (version 1.0)-Software for Composite analysis of concrete (Creep, relaxation, eigenstrain/stress, loss of prestress): User Manual", Report I-22, Dept. Struct. Eng. and Materials, Tech. Univ. Denmark, 1999.
175. Hastrup, K.: "Polymerimpregnering af porose materialer" (in danish, Polymer impregnation of porous materials), Thesis, Build. Mat. Lab., Tech. Univ. Denmark, Tech. Report 42(1976).
176. Nielsen, L. Fuglsang: "Power-Law creep of wood-composite and dynamic aspects", Conference of Int. Union of Forestry Research Organizations (IUFRO), Bordeaux-France, 17.-21. August, 1992. Proc., Build. Mat. Lab., Tech. Univ. Denmark, 1993, pp. 25-33.
177. Pentoney, R.E.: "Time-dependent mechanical properties of wood", Int. conf. on "The mechanical behavior of wood", held at the Univ. of California, Berkeley, California, USA, Aug. 27-Sept. 1, 1962. Proc. (ed. A.P. Schniewind), University Extension, Univ. of California. Northern Area, USA 1963.
178. Nowick, A.S., and Berry, B.S.: "Anelastic relaxation in crystalline solids", Academic Press, New York, 1972.
179. Hill, R.: "Elastic behaviour of crystalline aggregate", Proc. Phys. Soc. (London), A65(1952), nr 389, 349.
180. Voigt, W.: "Lehrbuch der Krystallphysik", Teubner, Leipzig, 1910 (reprinted, Teubner, Stuttgart, 1966).
181. Reuss, A.: "Berechnung der fliessgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle", Ztschr. f. angew. Math. u. Mech., 9(1929), 49.
182. Hashin, Z. and Shtrikman, S.: "A variational approach to the theory of the elastic behavior of polycrystals", Mech. Phys. Solids, 10(1962), 343.
183. Eshelby, J.D.: "The determination of the elastic field of an ellipsoidal inclusion, and related problems", Proc. R. Soc. London, Ser. A, 241(1957), 376-396.
184. Stang, Henrik: Personal communication, Dept. Struct. Eng. and Mat., Tech. Univ., Denmark, April 1997.
185. Nielsen, L. Fuglsang: "Materialemekanik II-Rheologi, Brud, Kompositmaterialer og Levetid", (in danish, Material mechanics II-Rheology, Damage, Composites, and Fatigue), Textbook (TR-189), Build. Mat, Lab., Techn. Univ. Denmark, 1988.
186. Leaderman, H.: "Viscoelastic phenomena in amorphous high polymeric systems", Chap. 1 in Eirich, F. (ed): "Rheology", Vol. II, Academic Press Inc., New York, 1958.
187. Schwarzl, F.R.: "Numerical calculation of stress relaxation modulus from dynamic data for linear viscoelastic materials", Rheologica Acta, 14(1975), pp. 581-590.
188. Powers, T.C.: "Physical properties of cement paste", Proc. Fourth Int. Symp. on the Chemistry of Cement, Washington, D.C., 1960, US Dept. of Commerce, National Bureau of Standards, Book 2(1962), no. 43.
189. Powers, T.C. and T.L. Brownyard: "Studies of the physical properties of hardened cement paste", ACI Journ., Proc. 41(1946-47), 101, 249, 469, 549, 669, 845, 865, 933, 971, (Chicago, Portland Cement Ass., Res. Dept. Bulletin 22(1948)).
190. Hansen, P. Freiesleben: "Hardeteknologi-1, Portland cement" og "Hardeteknologi-2, Dekrementmetoden", Bkf-centralen, 1978.