Palladium Membranes

Nonporous Inorganic Membranes: for Chemical Processing

Volumn , Issue , 2006, Pages 77-105

  Paglieri, Stephen N ^a  

^a LOS ALAMOS NATIONAL LABORATORY   (United States)

Author keywords

Effect of impurities; Membrane analysis; Membrane characterization; Nonporous inorganic membranes; Palladium alloy membranes; Palladium deposition methods; Palladium membranes; Recent advances

Indexed keywords

EID: 84891033196     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/3527608796.ch3     Document Type: Chapter

References (238)

1. Materials Research for Separations Technologies: Energy and Emission Reduction Opportunities, BCS, Inc. and Oak Ridge National Laboratory, 2005, p. 103.
2. J. Vaenselaar, Sustainable growth and chemical engineering Chem. Eng. Tech. 2003, 26, 868-874.
3. D. zur Megede, Fuel processors for fuel cell vehicles J. Power Sources 2002, 206, 35-41.
4. R. Hughes, Composite palladium membranes for catalytic membrane reactors Membr. Technol. 2001, 232(3), 9-13.
5. T. Graham, Absorption and separation ofgases by colloid septa Philos. Trans. R. Soc. 1866, 256(399), 426-431.
6. W.O. Snelling, Apparatus for separating gases, U.S. Patent 1 174 631, Mar. 7, 1916.
7. R. C. Hurlbert, J. O. Konecny, Diffusion of hydrogen through palladium J. Chem. Phys. 1961, 34(2), 655-658.
8. C. Lanzerstorfer, H. Puxbaum, The palladium/silver membrane focusing injector-a new inlet system for thermal desorption capillary gas chromatography Fresenius J. Anal. Chem. 1991 339(4), 223-225.
9. J. E. Lovelock, P. G. Simmonds, G. R. Shoemake, The palladium generator-separator-a combined electrolytic source and sink for hydrogen in closed circuit gas chromatography Anal. Chem. 1970, 42(9), 969-973.
10. P. G. Simmonds, G. R. Shoemake, J. E. Lovelock, Palladium-hydrogen system; efficient interface for gas chromatogra-phy-mass spectrometry Anal. Chem. 1970, 42(8), 881-885.
11. O. M. Katz, E. A. Gulbransen, Permeability and diffusivity ofhydrogen through a palladium tube Rev. Sci. Instrum. 1960, 32(6), 615-617.
12. J. R. Young, Purity ofhydrogen permeating through Pd, Pd-25% Ag, and Ni Rev. Sci. Instrum. 1963, 34(8), 891-892.
13. F. J. Ackerman, G. J. Koskinas, A model for predicting the permeation ofhydro-gen-deuterium-inert gas mixtures through palladium tubes Ind. Eng. Chem. Fundam. 1972, 22(3), 332-338.
14. Palladium curbs hydrogen waste The Iron Age, 1964, 293(19), 86.
15. Palladium keeps hydrogen pure for bright annealing lines The Iron Age 1963, 292(Feb 21), 140-141.
16. J. B. Hunter, A new hydrogen purification process Platinum Met. Rev. 1960, 4(4), 130-131.
17. P. M. Roberts, D. A. Stiles, Palladium alloy diffusion units Platinum Met. Rev. 1969, 23(4), 141.
18. E. J. Serfass, H. Silman, Hydrogen production and purification by the diffusion process The Chem. Eng. 1965, 292, CE266-271.
19. A. S. Darling, The diffusion ofhydrogen through palladium Platinum Met. Rev. 1958, 2(1), 16-22.
20. A. J. DeRosset, Diffusion ofhydrogen through palladium membranes Ind. Eng. Chem. 1960, 52(6), 525-528.
21. H. Connor, Hydrogen diffusion through silver-palladium foil electrodes Platinum Met. Rev., 1966, 20(4), 127.
22. G. L. Matlack, A fully integrated hydrogen diffusion system Plat. Met. Rev. 1969, 23(1), 26-27.
23. M. J. Cole, The generation ofpure hydrogen for industrial applications Platinum Met. Rev. 1985, 25(1), 12-13.
24. J. E. Philpott, Hydrogen diffusion technology: Commercial applications of Pd membranes Platinum Met. Rev. 1985, 29(1), 12.
25. J. E. Philpott, The on-site production of hydrogen Platinum Met. Rev. 1976, 20(4), 110-113.
26. J. Han, I.-S. Kim, K.-S. Choi, High purity hydrogen generator for on-site hydrogen production Int.J. Hydrogen Energy 2002, 27, 1043-1047.
27. W. C. Pfefferle, Process for Dehydro-genation, U.S. Patent 3 290406, Dec. 6, 1966.
28. V. M. Gryaznov, Membrane catalysts of the 21st century Petroleum Chem. 1995, 35(3), 181-188.
29. J. Miyazaki, T. Kajiyama, K. Matsumoto, H. Fujiwara, M. Yatabe, Ultra high purity hydrogen gas supply system with liquid hydrogen Int.J. Hydrogen Energy 1996, 22(5), 335-341.
30. Johnson-Matthey, Pureguard™ palladium alloy diffusion cells, 2005 (available at www.pureguard.net/html/pro-ducts.html).
31. R. E. Buxbaum, 2005, www.rebresearch.com/products.html.
32. Wah Chang Technical Data Sheet: Hydrogen Metal Membranes, 2005 (available at www.wahchang.com/wahchang/pages/products/hmm/hmm.htm).
33. G. P. Glazunov, E. D. Volkov, A. Hassanein, Bimetallic diffusion membranes: Possible use for active hydrogen recycling control, in Hydrogen & Helium Recycling at Plasma Facing Materials, August 22-24, 2002, Argonne, Illinois, USA, Kluwer Academic Publishers, Norwell, MA, 2002.
34. N. Iniotakis, W. Frohling, C. B. Von Der Decken, Filter for the selective removal oftritium from the coolant gas ofa high temperature nuclear reactor J. Less-Common Met. 1983, 89, 465-474.
35. V. M. Gryaznov, Metal containing membranes for the production ofultrapure hydrogen and the recovery ofhydrogen isotopes Sep. Purif. Meth. 2000, 29(2), 171-187.
36. S. Konishi, M. Hara, K. Okuno, Plasma exhaust processing by palladium permeation and electrolytic oxidation and reduction Fusion Technol. 1996, 30, 890-894.
37. D. L. Luo, Y. F. Xiong, J. F. Song, and G. Q. Huang, Hydrogen isotope separation factor measurement for single stage hydrogen separators and parameters for a large-scale separation system Fusion Sci. Technol. 2005, 48(1), 156-158.
38. V. V. Rumyantsev, V. M. Shatalov, G. Y. Misuna, Gas separation ofhydrogen isotopes by means ofmulticell metal membrane Desalination 2002, 248, 293-296.
39. S. Tosti, V. Violante, Numerical approach for a study ofthe hydrogen isotopes separation by palladium alloy membranes Fusion Eng. Des. 1998, 43(1), 93-100.
40. K. Aoki, Y. Ogata, K. Kusakabe, S. Morooka, Applicability ofpalladium membrane for the separation ofprotium and deuterium Int. J. Hydrogen Energy 1998, 23(5), 325-332.
41. V. V. Latyshev, V.M. Bystritskiy, Interaction ofhydrogen isotopes and diffusion membranes made from palladium alloys Phys. Met. Metall. 1991, 72(6), 120.
42. Y. I. Aristov, V. N. Parmon, G. Cacciola, N. Giordano, High-temperature chemical heat pump based on reversible catalytic reactions ofcyclohexane-dehydro-genation/benzene-hydrogenation: Comparison ofthe potentialities ofdifferent flow diagrams Int. J. Energy Res. 1993, 27, 293-303.
43. Y. M. Baranov, L. V. Stolyarova, M. F. Shopshin, T. K. Melik-Akhnazarov, T. S. Aleksashkina, Modern processes of hydrogen recovery from refinery gas Chem. Technol. Fuels Oils 1992, 27(5), 285-287.
44. J. Shu, B. P. A. Grandjean, A. Van Neste, S. Kaliaguine, Catalytic palladium-based membrane reactors: A review Can. J. Chem. Eng. 1991, 69(5), 1036-1060.
45. S. Uemiya, State-of-the-art ofsupported metal membranes for gas separation Sep. Purif. Methods 1999, 28(1), 51-85.
46. S. Paglieri, J. D. Way, Innovations in palladium membrane research Sep. Purif. Methods 2002, 32(1), 1-169.
47. J. Philpott, D. R. Coupland, Metal Membranes for Hydrogen Diffusion and Catalysis, in Hydrogen Effects in Catalysis, Z. Paal, P. G. Menon (Eds.), Marcel Dekker, Inc., New York, 1988, pp. 679-964.
48. G. J. Grashoff,C. E. Pilkington, C. W. Corti, The purification of hydrogen: A review of the technology emphasising the current status of palladium membrane diffusion Platinum Met. Rev. 1983, 27, 157-169.
49. J. Ali, A. Baiker, Dehydrogenation of methylcyclohexane to toluene in a pilot-scale membrane reactor Appl. Catal. A 1997, 255(1), 41-57.
50. V. M. Gryaznov, Conjugation of reactions using membrane catalysts Kinet. Catal. 1971, 22(3), 564-568.
51. P. Ferreira-Aparicio, M. Benito, K. Kouachi, S. Menad, Catalysis in membrane reformers: A high-performance catalytic system for hydrogen production from methane J. Catal. 2005, 232, 331-343.
52. H. Amandusson, L.-G. Ekedahl, H. Dannetun, Alcohol dehydrogenation over Pd versus PdAg membranes Appl. Catal. 2001, 227, 157-164.
53. V. Gryaznov, A century of studying the mechanism ofcatalytic reactions of hydrogen redistribution Russ. J. Phys. Chem 1999, 73(10), 1723-1726.
54. B. J. Wood, Dehydrogenation ofcyclo-hexane on a hydrogen-porous membrane J. Catal. 1968, 22, 30-34.
55. V. M. Gryaznov, A. P. Maganyuk, A. N. Karavanov, V. A. Naumov, Effect of phase composition ofpalladium-ruthe-nium membrane catalyst on selectivity of dehydrolinalool hydrogenation Bull. Acad. Sci. USSR 1984, 33(4), 853-855.
56. A. Basile, L. Paturzo, A. Vazzana, Membrane reactor for the production of hydrogen and higher hydrocarbons from methane over Ru/Al2Ö3 catalyst Chem. Eng.J. 2003, 93(1), 31-39.
57. S. Assambumrungrat, K. Suksomboon, P. Praserthdam, T. Tagawa, S. Goto, Simulation ofa palladium membrane reactor for dehydrogenation ofethylben-zene J. Chem. Eng. Jpn. 2002, 35(3), 263-273.
58. A. M. Adris, C. J. Lim, J. R. Grace, The fluidized bed membrane reactor for steam methane reforming: Model verification and parametric study Chem. Eng. Sci. 1997, 52, 1609-1622.
59. J. Tong, Y. Matsumura, H. Suda, K. Haraya, Experimental study ofsteam reforming of methane in a thin (6 (im) Pd-based membrane reactor Ind. Eng. Chem. Res. 2005, 44(5), 1454-1465.
60. 2 capture Energy Conversion Management 2005, 46(7-8), 1059-1071.
61. S. A. Birdsell, R.S. Willms, Tritium recovery from tritiated water with a two-stage palladium membrane reactor Fusion Eng. Des. 1998 39-40, 1041-1048.
62. K. L. Sessions, Processing tritiated water at the Savannah River Site: A production-scale demonstration ofa palladium membrane reactor Fusion Sci. Technol. 2005, 48(1), 91-96.
63. K. Munakata, B. Bornschein, D. Corneli, M. Glugla, Numerical simulation of membrane reactor for detritiation of plasma exhaust gas Fusion Sci. Technol. 2005, 48(1), 17-22.
64. E. Kikuchi, Hydrogen-permselective membrane reactors CATTECH, 1997, 2(1), 67-74.
65. G. Centi, R. Dittmeyer, S. Perathoner, M. Reif, Tubular inorganic catalytic membrane reactors: Advantages and performance in multiphase hydrogenation reactions Catal. Today 2003 79-80, 139-149.
66. J.N. Armor, Overcoming equilibrium limitations in chemical processes Appl. Catal. 2001, 222, 91-99.
67. K. K. Sirkar, P. V. Shanbhag, A. S. Kovvali, Membrane in a reactor: A functional perspective Ind. Eng. Chem. Res. 1999, 38(10), 3715-3737.
68. F. Roa, J. D. Way, Influence of alloy composition and membrane fabrication on the pressure dependence ofthe hydrogen flux ofpalladium-copper membranes Ind. Eng. Chem. Res. 2003, 42(23), 5827-5835.
69. S. Aggarwal, A. P. Monga, S. R. Perusse, R. Ramesh, V. Ballarotto, E. D. Williams, B. R. Chalamala, Y. Wei, R. H. Reuss, Spontaneous ordering ofoxide nanostructures Science 2000, 287, 2235-2237.
70. F. Roa, J. D. Way, The effect ofair exposure on palladium-copper composite membranes Appl. Surf. Sci. 2005, 240, 85-104.
71. F. Bustamante, R. M. Enick, R. P. Killmeyer, B. H. Howard, K. S. Rothenberger, A. V. Cugini, B. D. Morreale, M. V. Ciocco, Uncatalyzed and wall-catalyzed forward water-gas shift reaction kinetics AIChEJ. 2005, 52(5), 1440-1454.
72. L. Yang, Z. Zhang, X. Gao, Y. Guo, B. Wang, O. Sakai, H. Sakai, T. Takahashi, Changes in hydrogen permeability and surface state ofPd-Ag/ceramic composite membranes after thermal treatment J. Membr. Sci., 2005, 252, 145-154.
73. J. N. Keuler, L. Lorenzen, S. Miachon, Preparing and testing Pd films ofthick-ness 1-2 micrometer with high selectivity and high hydrogen permeance Sep. Sci. Technol. 2002, 37(2), 379-401.
74. R. G. Musket, Effects ofcontamination on the interactions ofhydrogen gas with palladium: A review J. Less-Common Met. 1976, 45, 173-183.
75. A. P. Mishchenko, V. M. Gryaznov, M. E. Sarylova, Effect ofthermodiffusion and chemical treatment ofthe surface of membrane catalysts made from palladium alloys with ruthenium and rhodium on penta-1,3-diene hydrogenation Bull. Acad. Sci. USSR 1991, 40(6 (1)), 1154-1157.
76. A. B. Antoniazzi, A. A. Haasz, P. C. Stangeby, The effect ofadsorbed carbon and sulphur on hydrogen permeation through palladium J. Nucl. Mater. 1989 262-264, 1065-1070.
77. J. P. Collins, R. W. Schwartz, R. Sehgal, T. L. Ward, C. J. Brinker, G. P. Hagen, C. A. Udovich, Catalytic dehydrogena-tion ofpropane in hydrogen permselec-tive membrane reactors Ind. Eng. Chem. Res. 1996, 35(12), 4398-4405.
78. B. A. McCool, Y.S. Lin, Nanostructured thin palladium-silver membranes: Effects ofgrain size on gas permeation properties J. Mater. Sci. 2001, 36, 3221-3227.
79. N. R. Roshan, A. P. Mishchenko, V. P. Ployakova, N. I. Parfenova, E. M. Savitsky, E. A. Voitekhova, V. M. Gryaz-nov, M. E. Sarylova, The effect ofthe surface state on the hydrogen permeability and the catalytic activity ofpalla dium alloy membranes J. Less-Common Met. 1983, 89, 423-428.
80. A. F. Y. Al-Shammary, I. T. Caga, J. M. Winterbottom, A. Y. Tata, I. R. Harris, Palladium-based diffusion membranes as catalysts in ethylene hydrogenation J. Chem. Tech. Biotechnol. 1991, 52, 571-585.
81. M. C. Iliuta, B. P. A. Grandjean, F. Larachi, Methane nonoxidative aromatiza-tion over Ru-Mo/HZSM-5 at temperatures up to 973 K in a palladium-silver/ stainless steel membrane reactor Ind. Eng. Chem. Res. 2003, 42, 323-330.
82. 2on hydrogen permeation through a palladium membrane Appl. Surf. Sci. 2000, 253, 259-267.
83. A. Kulprathipanja, G. O. Alptekin, J. L. Falconer, J. D. Way, Effects ofwater gas shift gases on Pd-Cu alloy membrane surface morphology and separation properties Ind. Eng. Chem. Res. 2004, 43(15), 4188-4198.
84. V. Höllein, M. Thornton, P. Quicker, R. Dittmeyer, Preparation and characterization ofpalladium composite membranes for hydrogen removal in hydrocarbon dehydrogenation reactors Catal. Today 2001, 67, 33-42.
85. D.-W. Lee, Y.-G. Lee, S.-E. Nam, S.-K. Ihm, K.-H. Lee, Study on the variation ofmorphology and separation behavior ofthe stainless steel supported membranes at high temperature J. Membr. Sci. 2003, 220, 137-153.
86. V. V. Latyshev, V. G. Gur'yanov, M. Y. Asliddinova, I. I. Cholovyan, G. I. Mironova, Hydrogen-stimulated penetration ofimpurities through palladium alloy membranes Russ. J. Phys. Chem. 1991, 65(5), 755-757.
87. 2 purification using a commercial Pd-Ag membrane AIChE J. 1999, 45(1), 204-208.
88. I. G. Batirev, A. N. Karavanov, J. A. Leiro, M. Heinonen, J. Juhanoja, X-ray photoelectron and Auger electron spec-troscopies and surface segregations in Pd-Rh and Pd-Ru membrane catalysts Surf Int. Anal. 1995, 23(1), 50-54.
89. J. Shu, B. E. W. Bongondo, B. P. A. Grandjean, A. Adnot, S. Kaliaguine, Surface segregation ofPd-Ag membranes upon hydrogen permeation Surf. Sci. 1993, 292, 129-138.
90. Y. Cao, H. Li, J. A. Szpunar, W. T. Shmayda, Modeling ofhydrogen trapping in the deformed Pd and Pd77Ag23 alloy Mater. Sci. Eng. 2004, 379, 173-180.
91. E. S. Carnell, S. P. Wach, Transport coefficients and energetics ofhydrogen in palladium Surf. Coatings Technol. 1986, 28, 339-345.
92. 2 on hydrogen permeation through the palladium membrane Mater. Trans., JIM, 1990, 31(5), 404-408.
93. D. J. Edlund, W. A. Pledger, Thermolysis ofhydrogen sulfide in a metal-membrane reactor J. Membr. Sci. 1993, 77, 255-264.
94. 2S from natural gas streams J. Membr. Sci. 1994, 94, 111-119.
95. M. Kajiwara, S. Uemiya, T. Kojima, Stability and hydrogen permeation behavior ofsupported platinum membranes in presence ofhydrogen sulfide Int. J. Hydrogen Energy 1999, 24(9), 839-844.
96. P. Kamakoti, B. D. Morreale, M. V. Ciocco, B. H. Howard, R. P. Killmeyer, A. V. Cugini, D. S. Sholl, Prediction of hydrogen flux through sulfur-tolerant binary alloy membranes Science 2005, 307, 569-573.
97. K. J. Bryden, J. Y. Ying, Nanostructured palladium-iron membranes for hydrogen separation and membrane hydrogenation reactions J. Membr. Sci. 2002, 203, 29-42.
98. 2 S J. Membr. Sci. 2005, 254, 49-62.
99. J. K. Ali, E. J. Newson, D. W. T. Rippin, Deactivation and regeneration ofPd-Ag membranes for dehydrogenation reactions J. Membr. Sci. 1994, 89, 171-184.
100. A. Li, R. Hughes, The effect ofcarbon monoxide and steam on the hydrogen permeability of a Pd/stainless steel membrane J. Membr. Sci. 2000, 265, 135-141.
101. Y. Sakamoto, F. L. Chen, Y. Kinari, F. Sakamoto, Effect ofcarbon monoxide on hydrogen permeation in some palladium-based alloy membranes Int. J. Hydrogen Energy 1996, 22(11/12), 1017-1024.
102. E. Xue, M. O'Keeffe, J. R. H. Ross, Water-gas shift conversion using a feed with a low steam to carbon monoxide ratio and containing sulphur Catal. Today 1996, 30, 107-118.
103. S. Hara, K. Sakaki, N. Itoh, Decline in hydrogen permeation due to concentration polarization and CO hindrance in a palladium membrane reactor Ind. Eng. Chem. Res. 1999, 38(12), 4913-4918.
104. D. Wang, T.B. Flannagan, K. L. Shanan-han, Permeation ofhydrogen through pre-oxidized Pd membranes in the presence and absence ofCO J. Alloys Compd. 2004, 372, 158-164.
105. H. Amandusson, L.-G. Ekedahl, H. Dannetun, Hydrogen permeation through surface modified Pd and PdAg membranes J. Membr. Sci. 2001, 293, 35-47.
106. J. K. Ali, P. Hasler, E. J. Newson, D. W. T. Rippin, Irreversible poisoning ofPd-Ag membranes Int. J. Hydrogen Energy 1994, 29(11), 877-880.
107. A. G. Knapton, Palladium alloys for hydrogen diffusion membranes: A review ofhigh permeability materials Platinum Met. Rev. 1977, 22(2), 44.
108. C. Anderton, N. Strother, J. Pote, R. Foley, K. Rebeiz, S. Nesbit, A. Craft, Influence ofpartial hydride formation/ decomposition on the mechanical properties ofpalladium Scr. Mater. 1996, 35(8), 1013-1018.
109. A. Adrover, M. Giona, L. Capobianco, V. Violante, Effects ofself-stress on hydrogen diffusion in Pd membranes in the coexistence ofalpha and beta phases J. Alloys Compd. 2004, 368, 287-297.
110. F. A. Lewis The Palladium Hydrogen System, Academic Press, London, 1967.
111. B. A. Wilhite, M. A. Schmidt, K. F. Jensen, Palladium-based micromembranes for hydrogen separation: Device performance and chemical stability Ind. Eng. Chem. Res 2004, 43, 7083-7091.
112. L. C. W. Hobbis, E. R. Harrison, Use of nickel diffusion tubes for the purification ofhydrogen Rev. Sci. Instrum. 1956, 27(4), 238.
113. D. Slovetsky, Russian membrane technology produces hydrogen Membr. Tech- nol. 2002, 242(2), 1.
114. V. I. Koshel', V. V. Latyshev, V. A. Gol'tsov, Thermal concentration dilation of V-2 membrane alloy in a hydrogen atmosphere Sov. Mater. Sci. 1984, 20(6), 551-553.
115. F. N. Berseneva, I. A. Mikhaylova, N. I. Timofeyev, The influence ofhydrogen on the phase composition and physico-mechanical properties ofthe membrane palladium-based alloy V-1 Phys. Met. Metall. 1992, 72(2), 151-156.
116. I. Y. Machikina, G. A. Barannikova, V. A. Gol'tsov, V. V. Latyshev, S. K. Kurumchina, N. I. Timofeev, Mechanical and diffusion characteristics ofpalladium-base type V-3 phase-hardened alloys for hydrogen diffusion filters Sov. Mater. Sci. 1985, 22(1), 97-99.
117. D. Wang, T. Flanagan, K. L. Shanahan, Hydrogen permeation measurements of partially internally oxidized Pd-Al alloys in the presence and absence ofCO J. Membr. Sci. 2005, 253, 165-173.
118. D.W. Kim, K. Y. Um, H. G. Kim, I. S. Lee, S. H. Kim, J. S. Park, S. J. Ryi, S. H. Cho, A Pd-Cu-Ni ternary alloyed membrane on porous nickel support prepared by sputtering and copper reflow Jpn. J. Appl. Phys. 2005, 744(7), L233-L234.
119. I. N. Avertseva, M. V. Raevskaya, Hydrogen permeability and mechanical properties ofpalladium alloyed with ruthenium, samarium, yttrium, and neodymium Phys. Met. Metall. 1994, 77(5), 518-521.
120. N. I. Timofeev, F. N. Berseneva, V. M. Makarov, New palladium-based membrane alloys for separation ofgas mixtures to generate ultrapure hydrogen Int. J. Hydrogen Energy 1994, 29(11), 895-898.
121. K. J. Bryden, J. Y. Ying, Synthesis and structural characteristics ofmechnically alloyed nanostructured palladium yttrium Mater. Sci. Forum 1996 225-227(2), 895-900.
122. H. Gao, Y. S. Lin, Y. Li, B. Zhang, Chemical Stability and its improvement ofpalladium-based metallic membranes Ind. Eng. Chem. Res 2004, 43(22), 6920-6930.
123. G. A. Kok, A. Noordermeer, B. E. Nieuwenhuys, Effect ofalloying on the adsorption ofCO on palladium; a comparison ofthe behaviour ofPdAg(111), PdCu(111) and Pd(111) surfaces Surf. Sci. 1985 252/253, 505-512.
124. A. Noordermeer, G. A. Kok, B. E. Nieuwenhuys, A comparative study ofthe behaviour ofthe PdAg(111) and Pd(111) surfaces towards the interaction with hydrogen and carbon monoxide Surf. Sci. 1986, 265,375-392.
125. A. Noordermeer, G. A. Kok, B. E. Nieuwenhuys, Comparison between the adsorption properties ofPd(111) and PdCu(111) surfaces for carbon monoxide and hydrogen Surf. Sci. 1986, 272, 349-362.
126. A. S. Zetkin, G. E. Kagan, A. N. Varaksin, E. S. Levin, Diffusion and penetrability ofdeuterium in the alloy Pd-53 at. Cu, Sov. Phys. Solid State, 1992, 34(1), 83-85.
127. D. L. McKinley, Metal alloy for hydrogen separation and purification, U.S. Patent 3 350 845, Nov. 7, 1967.
128. D. L. McKinley, Method for hydrogen separation and purification, U.S. Patent 3 439 474, Apr. 22, 1969.
129. 2S decomposition, in Proceedings ofthe Advanced Coal-Fired Power Systems '96 Review Meeting, Jul. 16-18, 1996, Mor-gantown, West Virginia, USA.
130. H. T. Hoang, H. D. Tong, F. C. Gielens, H. V. Jansen, M. C. Elwenspoek, Fabrication and characterization ofdual sputtered Pd-Cu alloy films for hydrogen separation membranes Mater. Lett. 2004, 58, 525-528.
131. P. H. Thornton, Palladium and palladium/copper thin flat membranes, U.S. Patent 6 171 712, Jan. 9, 2001.
132. J. Piper, Diffusion ofhydrogen in copper-palladium alloys J. Appl. Phys. 1966, 37(2), 715-721.
133. P. R. Subramanian, D. J. Chakrabarti, D. E. Laughlin (Eds.) Phase Diagrams of Binary Copper Alloys. Monograph Series on Alloy Phase Diagrams, The Materials Information Society, Materials Park, OH, 1994, pp. 308-318.
134. B. D. Morreale, M. V. Ciocco, B. H. Howard, R. Killmeyer, A. V. Cugini, R. M. Enick, Effect of hydrogen-sulfide on the hydrogen permeance of palladium-copper alloys at elevated temperatures J. Membr. Sci. 2004, 242, 219-224.
135. 2 flux of composite Pd-Cu membranes Desa-lination 2002, 247(1-3), 411-416.
136. N. E. Fernandes, S. M. Fisher, J. C. Poshusta, D. G. Vlachos, M. Tsapatsis, J. J. Watkins, Reactive deposition of metal thin films within porous supports from supercritical fluids Chem. Mater. 2001, 23(6), 2023.
137. S. Uemiya, E. Makino, I. Miyazaki, H. Kawamura, R. Yoshiie, H. Moritomi, M. Nishimura, Fabrication ofa palladium composite membrane using supercritical wet plating technique in Proceedings of the 8th International Conference on Inorganic Membranes, Jul. 18-22, 2004, Cincinnati, OH, Adams Press, Chicago, IL.
138. Z. Y. Li, H. Naeda, K. Kusakabe, S. Morooka, H. Anzai, S. Akiyama, Preparation ofpalladium-silver alloy membranes for hydrogen separation by the spray pyrolysis method J. Membr. Sci. 1993, 78, 247-254.
139. J. Kim, Y.S. Lin, Palladium-modified yttria-stablilized zirconia membranes Ind. Eng. Chem. Res. 2000, 39(6), 2124-2126.
140. R. M. de Vos, H. Vereij, High-selectivity, high-flux silica membranes for gas separation Science, 1998, 279(13), 1710-1711.
141. N. Itoh, T. Akiha, T. Sato, Preparation of thin palladium composite membrane tube by a CVD technique and its hydrogen permselectivity Catal. Today 2005, 204, 231-237.
142. G. Y. Meng, L. Huang, M. Pan, C. S. Chen, D. K. Peng, Preparation and characterization ofPd and Pd-Ni alloy membranes on porous substrates by MOCVD with mixed metal //-diketone precursors Mater. Res. Bull., 1997, 32(4), 385-395.
143. G. Xomeritakis, Y.-S. Lin, CVD synthesis and gas permeation properties of thin palladium/alumina membranes AIChEJ. 1998, 44(1), 174-183.
144. G. O. Mallory, J. B. Hajdu (Eds.) Electro-less Plating, American Electroplaters & Surface Finishers Society, New York, Noyes Publications, Orlando, FL, 1990, p. 539.
145. P. D. Cobden, V. V. Gorodetskii, B. E. Nieuwenhuys, Field emission microscope study ofthe initial behaviour of the palladium-hydrogen system at low temperatures Surf. Sci. 1999, 432, 61-68.
146. S. N. Paglieri, K. Y. Foo, J. D. Way, J. P. Collins, D. L. Harper-Nixon, A new preparation technique for Pd/alumina membranes with enhanced high temperature stability Ind. Eng. Chem. Res. 1999, 38(5), 1925-1936.
147. D. A. Pacheco Tanaka, M. A. Llosa Tanco, S. Niwa, Y. Wakui, F. Mizukami, T. Namba, T. M. Suzuki, Preparation of palladium and silver alloy membrane on a porous alpha alumina tube via simultaneous electroless plating J. Membr. Sci. 2005, 247, 21-27.
148. K. Kuraoka, H. Zhao, T. Yazawa, Pore-filled palladium-glass composite membranes for hydrogen separation by novel electroless plating technique J. Mater. Sci. 2004, 39, 1879-1881.
149. 2-modified porous stainless steel for a high-hydrogen-flux membrane Ind. Eng. Chem. Res. 2005, 44(9), 3053-3058.
150. F. Roa, J. D. Way, R. L. McCormick, S. N. Paglieri, Preparation and characterization ofPd-Cu composite membranes for hydrogen separation Chem. Eng. J. 2003, 93(1), 11-22.
151. J. Shu, B. P. A. Grandjean, S. Kaliaguine, Morphological study ofhydrogen permeable Pd membranes Thin Solid Films 1994, 252(1), 26-31.
152. S. Uemiya, T. Matsuda, E. Kikuchi, Hydrogen permeable palladium-silver alloy membrane supported on porous ceramics J. Membr. Sci. 1991, 56, 315-325.
153. S. Uemiya, N. Sato, H. Ando, Y. Kude, T. Matsuda, E. Kikuchi, Separation of hydrogen through palladium thin film supported on a porous glass tube J. Membr. Sci. 1991, 56, 303-313.
154. W. H. Lin, H.F. Chang, Characterizations ofPd-Ag membrane prepared by sequential electroless deposition Surf. Coatings Technol. 2005, 294, 157-166.
155. 3 composite membrane by electroless codeposition Thin Solid Films 2004, 460, 62-71.
156. Y. H. Ma, I. P. Mardilovich, E. E. Engwall, Thin composite palladium and palladium/alloy membranes for hydrogen separation Ann. N.Y. Acad. Sci. 2003, 984, 346-360.
157. T.-C. Huang, M.-C. Wei, H.-I. Chen, Preparation ofhydrogen-permselective palladium-silver alloy composite membranes by electroless co-deposition Sep. Purif. Technol. 2003, 32, 239-245.
158. J. Shu, B. P. A. Grandjean, E. Ghali, S. Kaliaguine, Simultaneous deposition ofPd and Ag on porous stainless steel by electroless plating J. Membr. Sci. 1993, 77, 181-195.
159. S. E. Nam, K.H. Lee, Preparation and characterization ofpalladium alloy composite membranes with a diffusion barrier for hydrogen separation Ind. Eng. Chem. Res. 2005, 44, 100-105.
160. T. L. Ward, S. B. Rathod, A. S. Chellappa, T. R. Vencill, Fabrication ofthin supported palladium alloy membranes for fuel cell applications, in Proceedings ofthe 8th International Conference on Inorganic Membranes, Jul. 18-22, 2004, Cincinnati, OH, Adams Press, Chicago, IL.
161. H. D. Tong, A. H. J. van den Berg, J. G. E. Gardeniers, H. V. Jansen, F. C. Gielens, M. C. Elwenspoek, Preparation of palladium-silver alloy films by a dualsputtering technique and its application in hydrogen separation membrane Thin Solid Films 2005, 479, 89-94.
162. B. McCool, G. Xomeritakis, Y. S. Lin, Composition control and hydrogen permeation characteristics ofsputter deposited palladium-silver membranes J. Membr. Sci. 1999, 262(1-2), 67-76.
163. H. J. Frost, Microstructural Evolution in Thin Films Mater. Char. 1994, 32, 257-273.
164. J. Shu, A. Adnot, B. P. A. Grandjean, S. Kaliaguine, Structurally stable composite Pd-Ag alloy membranes: Introduction ofa diffusion barrier Thin Solid Films 1996, 286(1-2), 72-79.
165. S. V. Karnik, M. K. Hatalis, M. V. Kothare, Towards a palladium micromembrane for the water gas shift reaction: Microfabrication approach and hydrogen purification results J. Microelectromech. Syst. 2003, 22(1), 93-100.
166. T. Akamatsu, K. Kume, K. Komiya, H. Yukawa, M. Morinaga, S. Yamaguchi, Electrochemical method for measuring hydrogen permeability through metals J. Alloys Compd. 2005, 393, 302-306.
167. T. L. Ward, T. Dao, Model ofhydrogen permeation behavior in palladium membranes. J. Membr. Sci. 1999, 253, 211-231.
168. P. L. Andrew, A. A. Haasz, Models for hydrogen permeation in metals J. Appl. Phys. 1992, 72(7), 2749-2757.
169. A. D. Le Claire, Permeation ofgases through solids Diffus. Defect Data 1983, 33, 1-66.
170. S. A. Koffler, J. B. Hudson, G. S. Ansell, Hydrogen permeation through alphapalladium Trans. Metall. Soc. AIME 1969, 245, 1735-1740.
171. J. P. Collins, J. D. Way, Preparation and characterization ofa composite palladium-ceramic membrane Ind. Eng. Chem. Res. 1993, 32(12), 3006-3013.
172. T. N. Kompaniets, A.A. Kurdyumov, Surface processes in hydrogen permeation through metal membranes Prog. Surf. Sci. 1984, 27, 75-152.
173. I. P. Mardilovich, E. Engwall, Y. H. Ma, Dependence ofhydrogen flux on the pore size and plating surface topology ofasymmetric Pd-porous stainless steel membranes Desalination 2002, 244(1- 3), 85-89.
174. Y. K. Baichtok, Y. A. Sokolinskii, M.B. Aizenbud, Limiting stage in the permeation ofhydrogen through palladium alloy membranes Russ. J. Phys. Chem. 1976, 50(6), 929-930.
175. P. A. Lessing, H. C. Wood, L. D. Zuck, Low temperature hydrogen transport using a palladium/copper membrane J. Mater. Sci. 2003, 38, 2401-2408.
176. S.-E. Nam, K.-H. Lee, A study on the palladium-nickel composite membrane by vacuum electrodeposition J. Membr. Sci. 2000, 270(1), 91-99.
177. R. Dittmeyer, V. Hollein, P. Quicker, P. Emig, G. Hausinger, F. Schmidt, Factors controlling the performance of catalytic dehydrogenation ofethylben-zene in palladium composite mem-brane reactors Chem. Eng. Sci. 1999, 54(10), 1431-1439.
178. O. Schramm, A. Seidel-Morgenstern, Comparing porous and dense membranes for the application in membrane reactors Chem. Eng. Sci. 1999, 54(10), 1447-1453.
179. K. S. Rothenberger, A. V. Cugini, B. H. Howard, R. P. Killmeyer, M. V. Ciocco, B. D. Morreale, R. M. Enick, F. Bustamante, I. P. Mardilovich, Y. H. Ma, High pressure hydrogen permeance of porous stainless steel coated with a thin palladium film via electroless plating J. Membr. Sci. 2004, 244, 55-68.
180. 2S on a Pd-Cu ceramic composite membrane made by electroless plating in Proceedings of the 8th International Conference on Inorganic Membranes, Jul. 18-22, 2004, Cincinnati, OH, Adams Press, Chicago, IL.
181. E. Gobina, K. Hou, R. Hughes, Ethane dehydrogenation in a catalytic membrane reactor coupled with a reactive sweep gas Chem. Eng. Sci. 1995, 50(14), 2311-2319.
182. P. P. A. C. Pex, Y. C. van Delft, L. A. Correia, H. M. van Veen, D. Jansen, J. W. Dijkstra, Palladium alloy membranes for energy efficient membrane reactors in Proceedings ofthe 8th International Conference on Inorganic Membranes, Jul. 18-22, 2004, Cincinnati, OH, Adams Press, Chicago, IL.
183. R. B. Belser, R. B., Alloying behavior of thin bimetal films, simultaneously or successively deposited J. Appl. Phys. 1960, 32(3), 562-570.
184. 2 separation Sep. Purif. Tech- nol. 2003, 32, 265-270.
185. L. C. Witjens, J. H. Bitter, A. J. Van Dillen, W. M. Arnoldbik, F. H. P. M. Habraken, K. P. de Jong, Improving the control of the electroless plating synthesis ofPd/Ag membranes for hydrogen sep-aration using Rutherford backscatter-ing J. Membr. Sci. 2005, 254, 241-248.
186. J. N. Keuler, L. Lorenzen, R. D. Sanderson, V. Prozesky, W. J. Przybylowicz, Characterising palladium-silver and palladium-nickel alloy membranes using SEM, XRD and PIXE Nucl. Instrum. Methods Phys. Res. B 1999, 258, 678-682.
187. K.-N.P. Kumar, K. Keizer, A. J. Burggraaf, Stabilization ofthe porous texture ofnanostructured titania by avoiding a phase transformation J. Mater. Sci. Lett. 1994, 23, 59-61.
188. 2 electroless plating catalysis system adsorbed onto shape memory alloy particles. J. App. Phys. 2004, 96(9), 4945-4951.
189. J. Horkans, J. Kim, C. McGrath, L. T. Romankiw, A TEM study ofthe effect of accelerators on Pd-Sn colloidal catalysts and on the initiation ofelectroless Cu deposition on epoxy J. Electrochem. Soc. 1987, 234(2), 300-304.
190. J. Luyten, J. Cooymans, W. Adriansens, R. Leysen, Alternative process routes for better ceramic membrane supports Ind. Ceram. 2000, 20(1), 29-31.
191. V. M. Gryaznov, O. S. Serebryannikova, Y. M. Serov, M. M. Ermilova, A. N. Karavanov, A. P. Mischenko, N. V. Orekhova, Preparation and catalysis over palladium composite membranes Appl. Catal. A 1993, 96(1), 15.
192. D. J. Edlund, J. McCarthy, The relationship between intermetallic diffusion and flux decline in composite-metal membranes: Implications for achieving long membrane lifetime J. Membr. Sci. 1995, 207, 147-153.
193. N. M. Peachey, R. C. Snow, R. C. Dye, Composite Pd/Ta metal membranes for hydrogen separation J. Membr. Sci. 1996, 222, 123-133.
194. S. Uemiya, Y. Kude, K. Sugino, N. Sato, T. Matsuda, E. Kikuchi, A palladium/ porous-glass composite membrane for hydrogen separation Chem. Lett. 1988, 1687-1690.
195. P. P. Mardilovich, P. V. Kurman, A. N. Govyadinov, I. P. Mardilovich, R. Paterson, V. M. Gryaznov, Gas Permeability ofAnodized Alumina Membranes with a Palladium-Ruthenium Alloy Layer, Russ. J. Phys. Chem. 1996, 70(3), 514-517.
196. 2 permeation studies AIChE J. 2002, 48(2), 262-268.
197. K. L. Yeung, A. Varma, Novel preparation techniques for thin metal-ceramic composite membranes AIChE J. 1995 42(9), 2131.
198. S.-E. Nam, S.-H. Lee, K.H. Lee, Preparation ofa palladium alloy composite membrane supported in a porous stainless steel by vacuum electrodeposition J. Membr. Sci. 1999, 253, 163-173.
199. S. Morooka, S. Yan, S. Yokoyama, K. Kusakabe, Palladium membrane formed in macropores ofsupport tube by chemical vapor deposition with cross-flow through a porous wall Sep. Sci. Technol. 1995, 30(14), 2877-2889.
200. V. V. Latyshev, V. G. Gur'yanov, M. Y. Asliddinova, I. I. Cholovyan, G. I. Mironova, Hydrogen-stimulated impurity diffusion through palladium-alloy membranes Sov. Phys. Technol. Phys. 1991, 36(9), 1058-1059.
201. K. S. Weil, J. T. Darsell, J. S. Hardy, J. Y. Kim, Advances in air brazing for use in joining and sealing high-temperature gas separation membranes in Proceedings of the 28th Fossil Energy Materials Conference, Jun. 2-4, 2004, Knoxville, TN, Oak Ridge National Laboratory.
202. S.Tosti, L. Bettinali, Diffusion bonding ofPd-Ag rolled membranes J. Mater. Sci. 2004, 39, 3041-3046.
203. S. Tosti, A. Adrover, A. Basile, V. Camilli, G. Chiappetta, V. Violante, Characterization ofthin wall Pd-Ag rolled mem branes Int. J. Hydrogen Energy 2003, 28, 105-112.
204. H. Klette, Y. Larring, H. Raeder, R. Bredesen, A new method for preparation of Pd-based composite membranes in Proceedings ofthe 8th International Conference on Inorganic Membranes, Jul. 18-22, 2004, Cincinnati, OH, Adams Press, Chicago, IL.
205. W. Juda, C. W. Krueger, R. T. Bombard, Hydrogen Generators, WO Patent 00/ 05169, Feb. 3, 2000.
206. 2/ ceramic composite membrane Chem. Lett. 2004, 33(12), 1628-1629.
207. F. Morôn, M. P. Pina, E. Urriolabeitia, M. Menéndez, J. Santamaria, Preparation and characterization ofPd-zeolite composite membranes for hydrogen separation Desalination 2002, 247(1-3), 425-431.
208. M. Kajiwara, S. Uemiya, T. Kojima, E. Kikuchi, Rhodium- and iridium-dis-persed porous alumina membranes and their hydrogen permeation properties Catal. Today 2000, 56(1-3), 83-87.
209. J. H. So, K. Y. Yoon, S. M. Yang, Preparations ofmetal impregnated porous inorganic membranes for hydrogen separation by multi-step pore modifications Korean J. Chem. Eng. 1999, 26(2), 180-186.
210. M. Chai, Y. Yamashita, M. Machida, K. Eguchi, H. Arai, Preparation and characterization ofmetal-dispersed alumina membranes for selective separation ofhydrogen J. Membr. Sci. 1994, 97, 199-207.
211. H. Suda, K. Haraya. Gas transport properties ofcarbon molecular sieve membranes doped with nano particles in Proceedings ofthe 8th International Conference on Inorganic Membranes, Jul. 1822, 2004, Cincinnati, OH, Adams Press, Chicago, IL.
212. H. B. Zhao, G. X. Xiong, J. H. Gu, S. S. Sheng, H. Bauser, N. Stroh, K. Pflanz, Preparation and characterization of novel porous metal/ceramic catalytic membrane materials Catal. Today 1995, 25(3-4), 237-240.
213. A. L. Athayde, R. W. Baker, P. Nguyen, Metal composite membranes for hydrogen separation J. Membr. Sci. 1994, 94, 299-311.
214. J. H. Shim, S. M. Song, W. K. Her, I. G. Koo, W. M. Lee, Electrochemical Acceleration ofhydrogen transfer through a methanol impermeable metallic barrier J. Electrochem. Soc. 2003, 250, A1583- A1588.
215. T. Hejze, B. R. Gollas, R. K. Sauerbrey, M. Schmied, F. Hofer, J. O. Besenhard, Preparation ofPd-coated polymer electrolyte membranes and their application in direct methanol fuel cells J. Power Sources 2005, 240, 21-27.
216. H. P. Hsieh, General characteristics of inorganic membranes, in Inorganic Membranes Characterization and Applications, R.R. Bhave (Ed.), van Nostrand Reinhold, New York, 1991.
217. x layers Catal. Today 2005, 204, 225-230.
218. R. L. Goldsmith, Membrane devices for pervaporation, gas separations, and per-straction with permeate and sweep conduit and method ofuse, U. S. Patent Application 2005/0092683, May 5, 2005.
219. F. C. Gielens, H. D. Tong, C. J. M. Van Rijn, M. A. G. Vorstman, J. T. F. Keurentjes, Microsystem technology for high-flux hydrogen separation membranes J. Membr. Sci. 2004, 243, 203213.
220. J. D. Holladay, Y. Wang, E. Jones, Review ofdevelopments in portable hydrogen production using microreac-tor technology Chem. Rev. 2004, 204, 4767-4790.
221. M. V. Kothare, A. V. Pattekar, K. A. Alfadhel, L. Bleris, S. Mukherjee, Micro-reactors for efficient on-chip fuel processing and hydrogen generation Proc. SPIE 2005, 5592, 241-253.
222. A. J. Franz, K. F. Jensen, M. A. Schmidt, S. Firebaugh, Integrated palladium-based micromembranes for hydrogen separation and hydrogenation/dehydro-genation reactions, U. S. Patent 6 541 676, Apr. 1, 2003.
223. H. Klette, R. Bredesen, Sputtering of very thin palladium-alloy hydrogen sep aration membranes Membr. Technol. 2005, 5, 7-9.
224. B. Lanning, J. Arps, Cost-effective method for producing selfsupported palladium alloy membranes for use in efficient production ofcoal derived hydrogen Quarterly Technical Progress Report, Apr. 30, 2005, DOE report #DE00840474 (available at www.osti.-gov/bridge/servlets/purl/840474- A3mSZG/native/840474.pdf).
225. N Jemaa, J Shu, S Kaliaguine, P A Grandjean, Thin palladium film formation on shot peening modified porous stainless steel substrates Ind. Eng. Chem. Res 1996, 35, 973-977.
226. J. Tong, Y. Matsumura, Thin Pd membrane prepared on macroporous stainless steel tube filter by an in-situ multidimensional plating mechanism Chem. Commun. 2004, 22, 2460.
227. P. P. Mardilovich, Y. She, Y. H. Ma, M.-H. Rei, Defect-free palladium membranes on porous stainless-steel support AIChEJ. 1998, 44(2), 310-322.
228. J. Shu, B. P. A. Grandjean, S. Kaliaguine, Gas permeation and isobutane dehydrogenation over very thin Pd/ce-ramic membranes Can. J. Chem. Eng. 1997, 75(4), 712-720.
229. K. L. Yeung, S. C. Christiansen, A. Varma, Palladium composite membranes by electroless plating technique: Relationships between plating kinetics, film microstructure and membrane performance J. Membr. Sci. 1999, 259(1-2), 107-122.
230. A. Adrover, M. Giona, L. Capobianco, P. Tripodi, V. Violante, Stressinduced diffusion ofhydrogen in metallic membranes: Cylindrical vs. Planar formulation. II J. Alloys Compd. 2003, 358, 157-167.
231. W. S. Zhang, M. Q. Hou, H. Y. Wang, Y. B. Fu, Numerical simulation ofdiffu-sivity ofhydrogen in thin tubular metallic membranes affected by self-stresses Int.J. Hydrogen Energy 2004, 29, 1165-1172.
232. P. Zoltowski, Concentration transfer function ofhydrogen diffusion in self-stressed metals J. Electroanal. Chem. 2001, 522, 64-73.
233. K. Kandasamy, F. A. Lewis, Important Gorsfey effect influences on diffusion coefficients in metal-hydrogen systems Int. J. Hydrogen Energy 1999, 24, 763769.
234. F. A. Lewis, K. Kandasamy, X. Q. Tong, Lattice strain gradient effects on hydrogen diffusion parameter calculations Int. J. Hydrogen Energy 2002, 27, 687694.
235. X. Q. Tong, Y. Sakamato, F. A. Lewis, R. V. Bucur, K. Kandasamy, "Uphill" hydrogen diffusion effects and hydrogen diffusion coefficients in palladium Int.J. Hydrogen Energy 1997, 22(2/3), 141-144.
236. K. Aasberg-Petersen, C. S. Nielsen, S.L. Jørgensen, Membrane reforming for hydrogen Catal. Today 1998, 46(2- 3), 193-201.
237. B. Emonts, J. Bøgild Hansen, S. Lœgsgaard Jørgensen, B. Höhlein, R. Peters, Compact methanol reformer test for fuel-cell powered light-duty vehicles J. Power Sources 1998, 72, 288-293.
238. A. Criscuoli, A. Basile, E. Drioli, O. Loiacono, An economic feasibility study for water gas shift membrane reactor J. Membr. Sci. 2001, 282, 21-27.