Solid-state lighting: A system review

IEEE Industrial Electronics Magazine

Volumn 7, Issue 4, 2013, Pages 8-10

  Branas, Christian ^a   Azcondo, Francisco J ^a   Alonso, J Marcos ^b  

^a UNIVERSITY OF CANTABRIA   (Spain)

^b UNIVERSITY OF OVIEDO   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

ACTIVE POWER FACTOR CORRECTIONS; CURRENT-SHARING; EFFECT OF TEMPERATURE; LED DRIVERS; LED STRINGS; OPERATION CONDITIONS; SOLID STATE LIGHTING; SOLID-STATE LIGHTING TECHNOLOGY;

LIGHT EMITTING DIODES;

EID: 84890809411     PISSN: 19324529     EISSN: None     Source Type: Journal    
DOI: 10.1109/MIE.2013.2280038     Document Type: Article

References (54)

1. H. J. Round, "A note on carborundum," Elec. World, vol. 19, pp. 309, Feb. 1907.
2. O. V. Lossev, "Wireless telegraphy and telephony," Telegrafia i Telefonia bez provodor, no. 18, pp. 61, 1923 and no. 26, pp. 403, 1924.
3. O. V. Lossev, "Luminous carborundum detector and detection effect and oscillations with crystals," Philos. Mag., vol. 6, no. 39, pp. 1024-1044, 1928.
4. R. N. Hall, G. E. Fenner, J. D. Kingsley, T. J. Soltys, and R. O. Carlson, "Coherent light emission from GaAs junctions," Phys. Rev. Lett., vol. 9, no. 9, pp. 366-368, 1962.
5. N. Holonyak and S. F. Bevacqua,"Light emission from Ga(As1-XPX) junctions," Appl. Phys. Lett., vol. 1, no. 4, pp. 82-83, 1962.
6. M. I. Nathan, W. P. Dumke, G. Burns, F. H. Dill, and G. Lasher, "Stimulated emission of radiation from GaAs P-N junctions", Appl. Phys. Lett. vol. 1, no. 3, pp. 62-64, 1962.
7. S. Nakamura, T. Mukai, M. Senoh, "Candelaclass high-brightness InGaN/AlGaN doubleheterostructure blue-light-emitting diodes," Appl. Phys. Lett., vol. 64, no. 13, pp. 1687-1689, Mar. 1994.
8. S. Muthu, F. J. P. Schuurmans, and M. D. Pashley, "Red, green, and blue LEDs for white light illumination," IEEE Select. Topics Quantum Electron., vol. 8, no. 2, pp. 333-338, Mar./Apr. 2002. (Pubitemid 34659063)
9. S. Muthu and J. Gaines, "Red, green and blue LED-based white light source: Implementation challenges and control design," in Proc. 38th IAS Annu. Meeting, 2003, vol. 1. pp. 515-522.
10. B. Ackermann, V. Schulz, C. Martiny, A. Hilgers, and X. Zhu, "Control of LEDs," in Proc. 41st IAS Annu. Meeting, 2006, vol. 5, pp. 2608-2615. (Pubitemid 47514970)
11. H. J. Yu, W. Chung, and S. H. Kim, "White light emission from blue InGaN LED with hybrid phosphor," in Proc. 10th IEEE Int. Conf. Nanotechnology Joint Symp. with Nano Korea 2010, August 17-20, Kintex, Korea, pp. 958-961.
12. C. F. Lu, C. F. Huang, Y.-S. Chen, W. Y. Shiao, C.-Y. Chen, Y.-C. Lu, and C.-C. Yang, "Phosphorfree monolithic white-light LED," IEEE Select. Topics Quantum Electron., vol. 15, no. 4, pp. 1210-1217, July/Aug. 2009.
13. (2012, Apr. 11). OSLON SSL 80 Data Sheet Version 1.0. Published by OSRAM Opto Semiconductors GmbH. [Online]. Available: http://catalog.osram-os.com/jsp/ download. jsp?rootPath=/media/=LCW-CR7P.EC.p df=Graphics/00067655-0.pdf=/media// -en/Graphics/00067655-0.pdf
14. LUXEON Rebel ES Datasheet DS61. Philips Lumileds Lighting Company. Available: www.philipslumileds.com/uploads/17/DS61-pdf
15. S. Liu, K. Wang, Z. Chen, and X. Luo, "LED packaging and reliability for lighting applications," in Proc. 13th Int. Symp. Science and Technology of Lighting, June 24-29, 2012, Troy, New York, pp. 271-285.
16. C. Y. Tang, M. Y. Tsai, C. C. Lin, and L. B. Chang, "Thermal measurements and analysis of flipchip LED packages with and without underfills," in Proc. 5th Int. Microsystems Packaging Assembly and Circuits Technology Conf. (IMPACT), Oct. 20-22, 2010, pp. 1-4.
17. J. J. Wierer, D. A. Steigerwald, M. R. Krames, J. J. O'Shea, M. J. Ludowise, G. Christenson, Y. C. Shen, C. Lowery, P. S. Martin, S. Subramanya, W. Götz, N. F. Gardner, R. S. Kern, and S. A. Stockman, "High-power AlGaInN flip-chip lightemitting diodes," Appl. Phys. Lett., vol. 78, no. 22, pp. 3379-2281, May 2001.
18. M. Meneghini, G. Meneghesso, N. Trivellin, and E. Zanoni, "High-power LEDs for solid-state lighting: Reliability issues and degradation modes," in Proc. 13th Int. Symp. Science and Technology of Lighting, June 24-29, 2012, Troy, New York, pp. 267-269.
19. H. Shirakawa, E. J. Louis, A. G. MacDiarmid, C. K. Chiang, and A. J. Heeger, "Synthesis of electrically conducting organic polymers: Halogen derivatives of polyacetylene, (CH)x," J. Soc. Chem. Commun., no. 16, pp. 578-580, 1977.
20. A. Bernanose, "Electroluminescence of organic compounds," 1955, Br. J. Appl. Phys., vol. 6 (Suppl. 4), pp. S54-S55, 1995.
21. C. W. Tang, and S. A. Vanslyke, "Organic electroluminescent diodes," Appl. Phys. Lett., vol. 51, no. 12, pp. 913-915, Sept. 1987.
22. J. H. Buroughs, D. D. C. Bradley, A. R. Brown, R. N. Marks, K. D. Mackay, R. H. Friend, P. L. Burn, and A. B. Holmes, "Light emitting diodes based on conjugated polymers," Nature, vol. 347, no. 6293, pp. 539-541, Oct. 1990. (Pubitemid 120015057)
23. W. F. Aerts, S. Verlaak, and P. Heremans, "Design of an organic pixel addressing circuit for an active-matrix OLED display," IEEE Trans. Electron Devices, vol. 49, no. 12, pp. 2124-2130, Dec. 2002.
24. Z. D. Popovic and H. Aziz, "Reliability and degradation of small molecule-based organic light-emitting devices (OLEDs)," IEEE Select. Topics Quantum Electron., vol. 8, no. 2, pp. 362-371, Mar./Apr. 2002. (Pubitemid 34659065)
25. Y. Chen, G. M. Smith, E. Loughman, Y. Li, W. Nie, and D. L. Carroll, "Effect of multi-walled carbon nanotubes on electron injection and charge generation in AC field-induced polymer electroluminescence," Org. Electron., vol. 14, no.1, pp. 8-18, Jan. 2013.
26. M. G. Figueiro, "An overview of the non-visual effects of light: Implications for new light sources and lighting systems design," in Proc. 13th Int. Symp. Science and Technology of Lighting, June 24-29, 2012, Troy, New York, pp. 23-37.
27. N. Narendran, "Updating a legacy: Trading up Edison's light bulb and electrical infrastructure," in Proc. 13th Int. Symp. Science and Technology of Lighting, June 24-29, 2012, Troy, New York, pp. 3-7.
28. N. Chen and H. S.-H. Chung, "Driving technology for retrofit LED lamp for fluorescent lighting fixtures with electronic ballasts," IEEE Trans. Power Electron., vol. 26, no. 2, pp. 588-601, 2011.
29. T. Yasuda, J. Sasaki, Y. Takahara, and S. Oosawa, "A series of flat shaped LED light engines with a heat-transfer solution," in Proc. 13th Int. Symp. Science and Technology of Lighting, June 24-29, 2012, Troy, New York, pp. 261-262.
30. D. Gacio, J. M. Alonso, J. Garcia, M. S. Perdigao, E. S. Saraiva, and F. E. Bisogno, "Effects of the junction temperature on the dynamic resistance of white LEDs," IEEE Trans. Ind. Applicat., vol. 49, no. 2, pp. 750-760, Mar.-Apr. 2013.
31. M.-H. Chang, D. Das, P. V. Varde, and M. Pecht, "Light emitting diodes reliability review," Microelectron. Reliab., vol. 52, no. 5, pp. 762-782, May 2012.
32. J. M. Alonso, D. Gacio, A. J. Calleja, J. Ribas, and E. L. Corominas, "A study on LED retrofit solutions for low-voltage halogen cycle lamps," IEEE Trans. Ind. Applicat., vol. 48, no. 5, pp. 1673, 1682, Sept.-Oct. 2012.
33. S. Y. R. Hui and Y. X. Qin, "A general photoelectro-thermal theory for light emitting diode (LED) systems," in Proc. 24th Annu. IEEE Applied Power Electronics Conf. Expo., APEC 2009, 15-19, Feb. 2009, pp. 554, 562.
34. Y. X. Qin, D. Y. Lin, H. S.-H. Chung, W. Yan, and S. Y. R. Hui, "Dynamic control of a lightemitting diode system based on the general photo-electro-thermal theory," in Proc. IEEE Energy Conversion Congr and Expo., (ECCE), 20-24 Sept. 2009, pp. 2815, 2820.
35. V. C. Bender, O. Iaronka, M. A. D. Costa, R. N. do Prado, and T. B. Marchesan, "An optimized methodology for LED lighting systems designers," in Proc. IEEE Industry Applications Society Annu. Meeting (IAS), Oct. 2012, pp. 1-8.
36. H. van der Broeck, G. Sauerlander, and M. Wendt, "Power driver topologies and control schemes for LEDs," in Proc. 22nd Annu. IEEE Applied Power Electronics Conf., APEC 2007, pp. 1319-1325.
37. C. Danjiang and Z. Wei, "Application of LN2117 series chips in White LED driver," in Proc. 2nd Int. Conf. Software Technology and Engineering ( ICSTE), 2010, vol. 2, pp. 244-246.
38. Y. Hu, L. Huber, and M. Jovanović, "Singlestage flyback power factor-correction frontend for HB LED application," in Proc. IEEE Industry Applications Society Annu. Meeting, IAS, 2009, pp. 1-8.
39. D. G. Lamar, J. S. Zuniga, A. R. Alonso, M. R. Gonzalez, and M. M. H. Alvarez, "A very simple control strategy for power factor correctors driving high-brightness LEDs," IEEE Trans. Power Electron., vol. 24, no. 8, pp. 2032-2042, Aug. 2009.
40. J. M. Alonso, J. Viña, D. G. Vaquero, G. Martinez, and R. Osorio, "Analysis and design of the integrated double buck-boost converter as a high-power-factor driver for power-LED lamps," IEEE Trans. Ind. Electron., vol. 59, no. 4, pp. 1689-1697, Apr. 2012.
41. J. M. Alonso, D. Gacio, J. Garcia, M. Rico-Secades, and M. A. Dalla Costa, "Analysis and design of the integrated double buck-boost converter operating in full DCM for LED lighting applications," in Proc. 37th Annu. Conf. IEEE Industrial Electronics Society, IECON 2011, 7-10 Nov., pp. 2889, 2894.
42. High-power-factor light-emitting diode lamp power supply without electrolytic capacitors for high-pressure-sodium lamp retrofit applications," IET Power Electron., vol. 6, no. 8, pp. 1502, 1515, Sept. 2013.
43. J. M. Alonso, D. Gacio, A. J. Calleja, F. Sichirollo, M. F. da Silva, M. A. D. Costa, and R. N. do Prado, "Reducing storage capacitance in offline LED power supplies by using integrated converters," in Proc. IEEE Industry Applications Society Annu. Meeting, IAS 2012, 7-11 Oct., pp. 1, 8.
44. M. M. Peretz, M. Chen, N. Goyal, and A. Prodic, "A merged-stage high efficiency high power factor HB-LED converter without electrolytic capacitor," in Proc. PCIM Europe Conf., Nuremberg, Germany, May 2012, pp. 357-364.
45. P. S. Almeida, M. A. D. Costa, J. M. Alonso, and H. A. C. Braga, "Application of series resonant converters to reduce ripple transmission to LED arrays in offline drivers," Electron. Lett., vol. 49, no. 6, pp. 414, 415, Mar. 2013.
46. W. Feng, F. C. Lee, and P. Mattavelli, "Optimal trajectory control of burst mode for LLC resonant converter," IEEE Trans. Power Electron., vol. 28, no. 1, pp. 457-466, Jan. 2013.
47. D. Gacio, J. M. Alonso, L. Campa, M. Crespo, and M. Rico, Spanish Patent #2.364.308, 2012.
48. D. Gacio, J. Marcos Alonso, J. Garcia, L. Campa, M. J. Crespo, and M. Rico-Secades, "PWM series dimming for slow-dynamics HPF LED Drivers: the high-frequency approach," IEEE Trans. Ind. Electron., vol. 59, no. 4, pp. 1717-1727, Apr. 2012.
49. K. H. Loo, Y. M. Lai, S.-C. Tan, and C. K. Tse, "On the color stability of phosphor-converted white LEDs under DC, PWM and bilevel drive," IEEE Trans. Power Electron., vol. 27, no. 2, pp. 974-984, Feb. 2012.
50. C. Brañas, F. J. Azcondo, and R. Casanueva, "Modulation scheme for dimming highbrightness LED lamps," in Proc. 13th Int. Symp. Science and Technology of Lighting, June 24-29, 2012, Troy, New York, pp. 247-248.
51. J. Zhang, H. Zeng, and T. Jiang, "A primaryside control scheme for high-power-factor LED driver with TRIAC dimming capability," IEEE Trans. Power Electron., vol. 27, no. 11, pp. 4619-4629, 2012.
52. Q. Hu and Z. Rane, "LED driver circuit with series-input-connected converter cells operating in continuous conduction mode," IEEE Trans. Power Electron., vol. 25, no. 3, pp. 574-582, Mar. 2010.
53. X. K. Wu, J. M. Zhang, and Z. M. Qian, "A simple two-channel LED driver with automatic precise current sharing," IEEE Trans. Ind. Electron., vol. 58, no. 10, pp. 4783-4788, 2011.
54. J. Wang, J. M. Zhang, X. K. Wu, Y. Shi, and Z. M. Qian, "A novel high efficiency and low-cost current balancing method for multi-LED driver," in Proc. IEEE Energy Conversion Congr. and Expo., ECCE, 2011, pp. 2296-2301.