Effects of controlling oxygen concentration on the performance, emission and combustion characteristics in a downsized SI engine

SAE Technical Papers

Volumn 6, Issue , 2013, Pages

  Zhou, Jianxi ^a   Richard, Stephane ^b   Mounaïm Rousselle, Christine ^a   Foucher, Fabrice ^a  

^a UNIVERSITÉ D'ORLÉANS   (France)

^b IFP Energies Novelles   (France)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION; ENGINE CYLINDERS;

COMBUSTION CHARACTERISTICS; COMMERCIAL SOFTWARE; EQUIVALENCE RATIOS; IN-CYLINDER PRESSURES; INDICATED MEAN EFFECTIVE PRESSURE; LAMINAR BURNING VELOCITY; OXYGEN CONCENTRATIONS; SPECIFIC FUEL CONSUMPTION;

OXYGEN;

EID: 84890321807     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2013-24-0056     Document Type: Conference Paper

References (29)

1. Poola, R., Ng, H., Sekar, R., Baudino, J. et al., " Utilizing Intake- Air Oxygen-Enrichment Technology to Reduce Cold-Phase Emissions," SAE Technical Paper 952420, 1995, doi: 10.4271/952420.
2. Kajitani, S., Clasen, E., Campbell, S., and Rhee, K., " Partial-load and Start-up Operations of Spark- Ignition Engine with Oxygen Enriched Air," SAE Technical Paper 932802, 1993, doi: 10.4271/932802.
3. Poola, R.B., Sekar R., Ng H.K., Baudino J.H., et al., The effects of oxygen-enriched intake air on FFV exhaust emissions using M85. 1996, Argonne National Lab., IL (United States).
4. Ng, H., Sekar, R., Kraft, S., and Stamper, K., " The Potential Benefits of Intake Air Oxygen Enrichment in Spark Ignition Engine Powered Vehicle," SAE Technical Paper 932803, 1993, doi: 10.4271/932803.
5. Rakopoulos, C., Hountalas, D., Zannis, T., and Levendis, Y., " Operational and Environmental Evaluation of Diesel Engines Burning Oxygen- Enriched Intake Air or Oxygen-Enriched Fuels: A Review," SAE Technical Paper 2004-01-2924, 2004, doi: 10.4271/2004-01-2924.
6. Caton, J., " Use of a Cycle Simulation Incorporating the Second Law of Thermodynamics: Results for Spark-Ignition Engines Using Oxygen Enriched Combustion Air," SAE Technical Paper 2005-01-1130, 2005, doi: 10.4271/2005-01-1130.
7. Poola, R., Stork, K., Sekar, R., Callaghan, K. et al., " Variable Air Composition with Polymer Membrane-A New Low Emissions Tool," SAE Technical Paper 980178, 1998, doi: 10.4271/980178.
8. Kajitani, S., Sawa, N., McComiskey, T., and Rhee, K., " A Spark Ignition Engine Operated by Oxygen Enriched Air," SAE Technical Paper 922174, 1992, doi: 10.4271/922174.
9. Quader, A., Exhaust Emissions and Performance of a Spark Ignition Engine Using Oxygen Enriched Intake Air. Combustion Science and Technology, 1978. 19 (1-2): p. 81-86.
10. Mounaïm-Rousselle, C., Landry L., Halter F. and Foucher F., Experimental characteristics of turbulent premixed flame in a boosted Spark-Ignition engine. Proceedings of the Combustion Institute, 2013. 34 (2): p. 2941-2949.
11. 2. Proceedings of the Combustion Institute, 2012.
12. Koros, W.J. and Chern R.T., Separation of gaseous mixtures using polymer membranes. Handbook of separation process technology, 1987: p. 862-953.
13. Coombe, H.S. and Nieh S., Polymer membrane air separation performance for portable oxygen enriched combustion applications. Energy Conversion and Management, 2007. 48 (5): p. 1499-1505.
14. Favre, E., Bounaceur R. and Roizard D., A hybrid process combining oxygen enriched air combustion and membrane separation for post-combustion carbon dioxide capture. Separation and Purification Technology, 2009. 68 (1): p. 30-36.
15. Richard, S., Bougrine S., Font G., Lafossas F.-A., et al., On the reduction of 3D CFD combustion model to build a physical 0D model for simulating heat release, knock and pollutants in SI engines. Oil & Gas Science and Technology-Rev. IFP, 2009. 64 (3): p. 223-242.
16. IFP-EN, IFP-Egine library. 2008.
17. Bougrine, S., Richard S. and Veynante D., On the combination of complex chemistry with a 0-D coherent flame model to account for the fuel properties in spark ignition engines simulations: Application to methane-air-diluents mixtures. Proceedings of the Combustion Institute, 2011. 33 (2): p. 3123-3130.
18. Bozza, F. and Gimelli, A., " A Comprehensive 1D Model for the Simulation of a Small-Size Two-Stroke SI Engine," SAE Technical Paper 2004-01-0999, 2004, doi: 10.4271/2004-01-0999.
19. Richard, S., Colin O., Vermorel O., Benkenida A., et al., Towards large eddy simulation of combustion in spark ignition engines. Proceedings of the Combustion Institute, 2007. 31 (2): p. 3059-3066.
20. Colin, O., Benkenida A. and Angelberger C., 3d Modeling of Mixing, Ignition and Combustion Phenomena in Highly Stratified Gasoline Engines Oil & Gas Science and Technology-Rev. IFP, 2003. 58 (1): p. 47-62.
21. Charlette, F., Meneveau C. and Veynante D., A power-law flame wrinkling model for LES of premixed turbulent combustion Part I: non-dynamic formulation and initial tests. Combustion and Flame, 2002. 131 (1-2): p. 159-180.
22. Blint, R.J., The Relationship of the Laminar Flame Width to Flame Speed. Combustion Science and Technology, 1986. 49 (1-2): p. 79-92.
23. Poulos, S.G. and Heywood J.B., The effect of chamber geometry on spark-ignition engine combustion. 1983.
24. 2-diluted air. Combustion and Flame, 2011. 158 (12): p. 2375-2383.
25. Galmiche, B., Halter F. and Foucher F., Effects of high pressure, high temperature and dilution on laminar burning velocities and Markstein lengths of iso-octane/air mixtures. Combustion and Flame, 2012. 159 (11): p. 3286-3299.
26. Friedman, R. and Johnston W.C., The Wall-Quenching of Laminar Propane Flames as a Function of Pressure, Temperature, and Air Fuel Ratio. Journal of Applied Physics, 1950. 21 (8): p. 791-795.
27. Mazas, A.N., Fiorina B., Lacoste D.A. and Schuller T., Effects of water vapor addition on the laminar burning velocity of oxygen-enriched methane flames. Combustion and Flame, 2011. 158 (12): p. 2428-2440.
28. Heywood, J. Combustion and its modeling in spark-ignition engines. in International symposium COMODIA. 1994.
29. Boulouchos, K., Steiner, T., and Dimopoulos, P., " Investigation of Flame Speed Models for the Flame Growth Period During Premixed Engine Combustion," SAE Technical Paper 940476, 1994, doi: 10.4271/940476.