Symmetric galerkin boundary element method

Symmetric Galerkin Boundary Element Method

Volumn , Issue , 2008, Pages 1-276

  Sutradhar, Alok ^a   Paulino, Glaucio H ^b   Gray, Leonard J ^c  

^a OHIO STATE UNIVERSITY   (United States)

^b UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

^c OAK RIDGE NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84889997563     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-3-540-68772-6     Document Type: Book

References (304)

1. R. A. Adey and S. M. Niku. Computer modelling of corrosion using the boundary element method. In Computer Modelling in Corrosion, volume ASTM STP 1154, pages 248-269. American Society of Testing and Materials, Philadelphia, 1992.
2. M. H. Aliabadi. Evaluation of mixed mode stress intensity factors using the path independent integral. In Proceedings 12th International Conference on Boundary Element Methods, pages 281-292, Southampton, 1990. Computational Mechanics Publications.
3. M. H. Aliabadi. Boundary element formulations in fracture mechanics. Applied Mechanics Reviews, 50(2):83-96, 1997.
4. M. H. Aliabadi. The Boundary Element Method: Vol 2. Application in solids and structures. John Wiley & Sons, Ltd, England, 2002.
5. T. L. Anderson. Fracture Mechanics: Fundamentals and Applications. CRC Press LLC, Boca Raton FL, 1995.
6. H. Andra. Integration of singular integrals for the Galerkin-type boundary element method in 3D elasticity. Comp. Mech. Appl. Mech. Engng., 157:239-249, 1998.
7. W. T. Ang, J. Kusuma, and D. L. Clements. A boundary element method for a second order elliptic partial differential equation with variable coefficients. Engineering Analysis with Boundary Elements, 18:311-316, 1996.
8. S. Aoki and K. Kishimoto. Prediction of galvanic corrosion rates by the boundary element method. Mathematical and Computer Modelling, 15(3-5):11-22, 1991.
9. S. N. Atluri and T. Zhu. New meshless local Petrov-Galerkin (MPLG) approach in computational mechanics. Computational Mechanics, 22:117-127, 1998.
10. S. J. Badger, S. B. Lyon, and S. Turgoose. Modeling the twin probe scanning electrode response. J. Electrochemical Soc., 145(12):4074-4081, 1998.
11. A. A. Bakr. The Boundary Integral Equation Method in Axisymmetric Stress Analysis Problems. Springer, Berlin, 1986.
12. J. Balas, J. Sladek, and V. Sladek. Stress Analysis By the Boundary Element Method. Elsevier, Amsterdam, 1989.
13. P. K. Banerjee. The Boundary Element Methods in Engineering. McGraw Hill, London, 1994.
14. D. M. Barnett. The precise evaluation of derivatives of the anisotropic elastic Green's functions. Phys. Stat. Sol. (b), 49:741-748, 1972.
15. R. S. Barsoum. On the use of isoparametric finite elements in linear fracture mechanics. International Journal for Numerical Methods in Engineering, 10:25-37, 1976.
16. G. Barton. Elements of Green's Functions and Propagation. Oxford University Press, Oxford, 1999.
17. A. A. Becker. The Boundary Element Method in Engineering. McGraw-Hill, London, 1992.
18. G. Beer. Programming the Boundary Element Method: An Introduction for Engineers. John Wiley & Sons, New Jersey, 2001.
19. T. Belytschko, Y. Y. Lu, and L. Gu. Element-free Galerkin methods. International Journal for Numerical Methods in Engineering, 37:229-256, 1994.
20. R. Bialecki and G. Kuhn. Boundary element solution of heat conduction problems in multizone bodies of nonlinear materials. Int. J. Numer. Meth. Engrg., 36:799-809, 1993.
21. J. O'M. Bockris and A. K. N. Reddy. Modern Electrochemistry. Plenum Press, New York, 1970.
22. M. Bonnet. Boundary Integral Equation Methods for Solids and Fluids. Wiley and Sons, England, 1995.
23. M. Bonnet. Exploiting partial or complete geometrical symmetry in 3D symmetric Galerkin indirect BEM formulations. International Journal for Numerical Methods in Engineering, 57(8):1053-1083, 2003.
24. M. Bonnet and H. D. Bui. Regular BIE for three-dimensional cracks in elastodynamics. In T. A. Cruse, editor, Advanced Boundary Element Methods, volume 16, pages 41-47, Berlin and New York, 1988. Springer-Verlag.
25. M. Bonnet, G. Maier, and C. Polizzotto. Symmetric Galerkin boundary element method. ASME Appl. Mech. Rev., 51(11):669-704, 1998.
26. S. Bradshaw, T. Canfield, and J. Kokinis and T. Disz. An interactive virtual environment for finite element analysis. In Proceedings of High Performance Computing'95, 1995.
27. C. A. Brebbia, editor. Topics in boundary element research, volume 7. Springer Verlag, Berlin and New York, 1990.
28. C. A. Brebbia and J. Dominguez. Boundary Elements: An Introductory Course. WIT Press, Boston, Southampton, 1992.
29. C. A. Brebbia, J. C. F. Telles, and L. C. Wrobel. Boundary Element Techniques. Springer-Verlag, Berlin and New York, 1984.
30. S. Bryson. Virtual reality in scientific visualization. Commun. ACM, 39(5):62-71, 1996.
31. H. D. Bui. An integral equation method for solving the problem of a plane crack of arbitrary shape. J. Mech. Phys. Solids, 25:29-39, 1977.
32. J. S. Bullock, G. E. Giles, and L. J. Gray. Simulation of an electrochemical plating process. In C. A. Brebbia, editor, Topics in boundary element research, volume 7, chapter 7, pages 121-141. Springer Verlag, Berlin and New York, 1990.
33. C. V. Camp and G. S. Gipson. Overhauser elements in boundary element analysis. Mathematical and Computer Modelling, 15(3-5):59-69, 1991.
34. D. Capuani, D. Bigoni, and M. Brun. Integral representations at the boundary for stokes flow and related symmetric Galerkin formulation. Archives of Mechanics, 57(5):363-385, 2005.
35. G. E. Cardew, M. R. Goldthorpe, I. C. Howard, and A. P. Kfouri. On the elastic T-term. Fundamentals of Deformation and Fracture: Eshelby Memorial Symposium, 1985.
36. A. Carini, M. Diligenti, P. Maranesi, and M. Zanella. Analytical integrations for two dimensional elastic analysis by the symmetric Galerkin boundary element method. Computational Mechanics, 23:308-323, 1999.
37. Angelo Carini and Alberto Salvadori. Analytical integrations 3D BEM. Comp. Mech., 28:177-185, 2002.
38. E. M. Carrillo-Heian, C. Unuvar, J. C. Gibeling, G. H. Paulino, and Z. A. Munir. Simultaneous synthesis and densification of niobium silicide/niobium composites. Scripta Materialia, 45:405-412, 2001.
39. H. Carslaw and J. Jaeger. Conduction of heat in Solids. Oxford University Press, London, 2nd edition, 1959.
40. A. Chandra and S. Mukherjee. Boundary Element Methods in Manufacturing. Oxford University Press, New York, 1997.
41. C. Chang and M. Mear. Boundary element method for two-dimensional linear elastic fracture analysis. Int. J. Fracture, 74:219-251, 1995.
42. U. Chang, C. S. Kang, and D. J. Chen. The use of fundamental Green's functions for the solution of problems of heat conduction in anisotropic media. International Journal of Heat and Mass, 16:1905-1918, 1973.
43. M. K. Chati and S. Mukherjee. Evaluation of gradients on the boundary using fully regularized hypersingular boundary integral equations. Acta Mechanica, 135:41-45, 1999.
44. M. K. Chati and S. Mukherjee. The boundary node method for three-dimensional problems in potential theory. International Journal for Numerical Methods in Engineering, 47:1523-1547, 2000.
45. M. K. Chati, S. Mukherjee, and Y. X. Mukherjee. The boundary node method for three-dimensional linear elasticity. International Journal for Numerical Methods in Engineering, 46:1163-1184, 1999.
46. M. K. Chati, S. Mukherjee, and G. H. Paulino. The meshless hypersingular boundary node method for three-dimensional potential theory and linear elasticity problems. Engineering Analysis with Boundary Elements, 25:639-653, 2001.
47. M. K. Chati, G. H. Paulino, and S. Mukherjee. The meshless standard and hypersingular boundary node methods - applications to error estimation and adaptivity in three-dimensional problems. International Journal for Numerical Methods in Engineering, 50:2233-2269, 2001.
48. C. S. Chen, R. Krause, R. G. Pettit, L. Banks-Sills, and A. R. Ingraffea. Numerical assessment of T-stress computation using a p-version finite element method. International Journal of Fracture, 107(2):177-199, 2001.
49. F. H. K. Chen and R. T. Shield. Conservation laws in elasticity of the J-integral type. Journal of Applied Mathematics and Physics (ZAMP), 28:1-22, 1977.
50. H. T. Chen and C. K. Chen. Hybrid Laplace transform/finite difference method for transient heat conduction problems. International Journal for Numerical Methods in Engineering, 26:1433-1447, 1988.
51. H. T. Chen and J.-Y. Lin. Application of the Laplace transform to non-linear transient problems. Applied Mathematical Modeling, 15:144-151, 1991.
52. A-H. D. Cheng, Y. Abousleiman, and T. Badmus. A Laplace transform bem for axysymmetric diffusion utilizing pre-tabulated green's function. Engineering Analysis with Boundary Elements, 9:39-46, 1992.
53. A. H.-D. Cheng. Darcy's flow with variable permeability: a boundary integral solution. Water Resources Research, 20:980-984, 1984.
54. A. H.-D. Cheng. Heterogeneities in flows through porous media by the boundary element method. In C. A. Brebbia, editor, Topics in Boundary Element Research, Vol. 4: Applications in Geomechanics, chapter 6, pages 129-144. Springer-Verlag, 1987.
55. Alexander H.-D. Cheng and Daisy T. Cheng. Heritage and early history of the boundary element method. Engineering Analysis with Boundary Elements, 29(3):268-302, 2005.
56. J. K. Choi and S. A. Kinnas. Numerical water tunnel in two- and three-dimensions. J. Ship Research, 42:86-98, 1998.
57. H. B. Coda and W. S. Venturini. Further improvements on 3D treatment BEM elastodynamic analysis. Engineering Analysis with Boundary Elements, 17:231-243, 1996.
58. H. B. Coda and W. S. Venturini. A simple comparison between two 3D time domain elastodynamic boundary element formulations. Engineering Analysis with Boundary Elements, 17:33-44, 1996.
59. B. Cotterell and J. R. Rice. Slightly curved or kinked cracks. International Journal of Fracture, 16(2):155-169, 1980.
60. S. L. Crouch. Solution of plane elasticity problems by the displacement discontinuity method. Int. J. Numer. Meth. Engrg., 10:301-343, 1976.
61. S. L. Crouch and A. M. Starfield. Boundary Element Methods in Solid Mechanics. George Allen and Unwin, London, 1983.
62. K. S. Crump. Numerical inversion of Laplace transforms using a Fourier series approximation. Journal of the Association for Computing Machinery, 23:89-96, 1974.
63. T. A. Cruse. Numerical solutions in three-dimensional elastostatics. Int. J. Solids Struct., 5:1259-1274, 1969.
64. T. A. Cruse. Boundary Element Analysis in Computational Fracture Mechanics. Kluwer Academic Publishers, Boston, 1988.
65. T. A. Cruse, D. W. Snow, and R. B. Wilson. Numerical solutions in axisymmetric elasticity. Computers and Structures, 7(3):445-451, 1977.
66. D. A. S. Curran, M. Cross, and B. A. Lewis. A preliminary analysis of boundary element methods applied to parabolic differential equations. In C. A. Brebbia, editor, New Developments in boundary element methods, pages 179-190. Computational Mechanics Publications, Southampton, 1980.
67. m (x) f (x) dx. Mathematics of Computation, 27:861-869, 1973.
68. B. Davies and B. Martin. Numerical inversion of the Laplace transform: A survey and comparison of methods. Journal of Computational Physics, 33:1-32, 1979.
69. L. A. De Lacerda and L. C. Wrobel. Hypersingular boundary integral equation for axisymmetric elasticity. International Journal for Numerical Methods in Engineering, 52(11):1337-1354, 2001.
70. L. A. De Lacerda and L. C. Wrobel. Dual boundary element method for axisymmetric crack analysis. International Journal of Fracture, 113(3):267-284, 2002.
71. F. A. de Paula and J. C. F. Telles. A comparison between point collocation and Galerkin for stiffness matrices obtained by boundary elements. Engineering Analysis with Boundary Elements, 6(3):123-128, 1989.
72. A. Deb, Jr. D. P. Henry, and R. B. Wilson. Alternate BEM formulations for 2- and 3-d thermoelasticity. Int. J. Solids Structures, 27:1721-1738, 1991.
73. J. Deconinck. Electrochemical cell design. In C. A. Brebbia, editor, Topics in boundary element research, volume 7, chapter 8, pages 142-170. Springer Verlag, Berlin and New York, 1990.
74. V. G. DeGeorgi. A review of computational analyses of ship cathodic protection systems. In BEM XIX, pages 829-838, Southampton, 1997. Computational Mechanics.
75. M. Denda. Mixed mode I, II and III analysis of multiple cracks in plane anisotropic solids by the BEM: A dislocation and point force approach. Engineering Analysis with Boundary Elements, 25(4-5):267-278, 2001.
76. E. Divo and A. J. Kassab. Generalized boundary integral equation for heat conduction in non-homogeneous media: recent developments on the sifting property. Engineering Analysis with Boundary Elements, 22:221-234, 1998.
77. E. Divo and A. J. Kassab. A generalized BEM for steady and transient heat conduction in media with spatially varying thermal conductivity. In M. Goldberg, editor, Boundary Integral Methods: Numerical and Mathematical Aspects, pages 37-76. Computational Mechanics Publications, 1999.
78. E. Divo and A. J. Kassab. Boundary Element Method for Heat Conduction: with Applications in Non-Homogeneous Media, Topics in Engineering Series Vol. 44. WIT Press, Billerica, MA, 2002.
79. Z.-Z. Du and J. W. Hancock. The effect of non-singular stresses on crack-tip constraint. Journal of the Mechanics and Physics of Solids, 39(3):555-567, 1991.
80. C. A. M. Duarte and J. T. Oden, An h-p adaptive method using clouds, Computer Methods in Applied Mechanics and Engineering, 139:237-262, 1996.
81. H. Dubner and J. Abate. Numerical inversions of Laplace transforms by relating them to the finite Fourier cosine transform. Journal of the Association for Computing Machinery, 15:115-223, 1968.
82. D. G. Duffy. On the numerical inversion of laplace transforms: Comparison of three new methods on characteristic problems from applications. ACM Transactions on Mathematical Software, 19:333-359, 1993.
83. Ney A. Dumont, Richardo A. P. Chaves, and G. H. Paulino. The hybrid boundary element method applied to problems of potential in functionally graded materials. International Journal of Computational Engineering Science, 5(4):863-891, 2004.
84. F. Durbin. Numerical inversion of laplace transforms: Efficient improvement to Dubner and Abate's method. Journal of the Association for Computing Machinery, 17:371-376, 1974.
85. J. F. Durodola and R. T. Fenner. Hermitian cubic boundary elements for two dimensional potential problems. International Journal for Numerical Methods in Engineering, 30:1051-1062, 1990.
86. Harrouni K. EL, D. Quazar, L. C. Wrobel, and C. A. Brebbia. Dual reciprocity boundary element method for heterogeneous porous media. In C. A. Brebbia and M. S. Ingber, editors, Boundary element technology VII, pages 151-159. Computational Mechanics Publication and Elsevier Applied Science, 1992.
87. Harrouni K. EL, D. Quazar, L. C. Wrobel, and A. H.-D. Cheng. Global interpolation function based DRBEM applied to Darcy's flow in heterogenous media. Engineering Analysis with Boundary Elements, 16:281-285, 1995.
88. G. Fairweather and A. Karageorghis. The method of fundamental solutions for elliptic boundary value problems. Advances in Computational Mathematics, 9:69-95(27), 1998.
89. T. Fett. T-stresses in rectangular plates and circular disks. Engineering Fracture Mechanics, 60(5-6):631-652, 1998.
90. A. Frangi. Regularization of boundary element formulations by the derivative transfer method. In V. Sladek and J. Sladek, editors, Singular Integrals in the Boundary Element Method, Advances in Boundary Elements, chapter 4, pages 125-164. Computational Mechanics Publishers, 1998.
91. A. Frangi. Fracture propagation in 3D by the symmetric Galerkin boundary element method. International Journal of Fracture, 116:313-330, 2002.
92. A. Frangi and M. Bonnet. A Galerkin symmetric and direct BIE method for Kirchoff elastic plates: formulation and implementation. International Journal for Numerical Method in Engineering, 41:337-369, 1998.
93. A. Frangi and M. Guiggiani. A direct approach for boundary integral equations with high-order singularities. International Journal for Numerical Method in Engineering, 49:871-898, 2000.
94. A. Frangi and G. Novati. Symmetric BE method in two-dimensional elasticity: evaluation of double integrals for curved elements. Computational Mechanics, 19:58-68, 1996.
95. A. Frangi, G. Novati, R. Springhetti, and M. Rovizzi. 3D fracture analysis by the symmetric Galerkin BEM. Comp. Mech., 28:220-232, 2002.
96. Q. Fulian, A. C. Fisher, and G. Denuault. Applications of the boundary element method in electrochemistry: scanning electrochemical microscopy. J. Phys. Chem. B, 103:4387-4392, 1999.
97. Q. Fulian, A. C. Fisher, and G. Denuault. Applications of the boundary element method in electrochemistry: scanning electrochemical microscopy, Part 2. J. Phys. Chem. B, 103:4393-4398, 1999.
98. M. Garzon, D. Adalsteinsson, L. J. Gray, and J. A. Sethian. A coupled integral-level set boundary integral method for moving boundary simulations. Interfaces and Free Boundaries, 7:277-302, 2005.
99. L. Gaul, M. Kogl, and M. Wagner. Boundary Element Methods for Engineers and Scientists. Springer-Verlag, Berlin Heidelberg New York, 2003.
100. D. P. Gaver. Observing stochastic processes, and approximate transform inversion. Operational Research, 14:444-459, 1966.
101. N. Ghosh, H. Rajiyah, S. Ghosh, and S. Mukherjee. A new boundary element method formulation for linear elasticity. Journal of Applied Mechanics, 53(1):69-76, 1986.
102. G. E. Giles, L. J. Gray, and J. S. Bullock. Validation of the BEPLATE code. In 1997 Electroforming Course and Symposium, Orlando, FL, 1998. American Electroplaters and Surface Finishers Society.
103. G. E. Giles, L. J. Gray, J. S. Bullock, and G. J. Van Berkel. Numerical simulation of anodic reactions. In D. Landolt, M. Matlosz, and Y. Sato, editors, Fundamental Aspects of Electrochemical Deposition and Dissolution Including Modeling, volume PV 99-33, New Jersey, 1999. Electrochemical Society.
104. M. A. Goldberg and C. S. Chen. The method of fundamental solutions for potential, helmholtz and diffusion problems. In M. A. Goldberg, editor, Boundary Integral Methods: Numerical and Mathematical Aspects, pages 103-176. Pineridge Press, Southampton, Boston, 1999.
105. E. Graciani, V. Mantič, F. Paris, and A. Blazquez. Weak formulation of axisymmetric frictionless contact problems with boundary elements: Application to interface cracks. Computers and Structures, 83(10-11 SPEC. ISS.):836-855, 2005.
106. E. Graciani, V. Mantič, F. Paris, and J. Cañas. A critical study of hypersingular and strongly singular boundary integral representations of potential gradient. Comp. Mech., 25:542-559, 2000.
107. L. J. Gray. Boundary element method for regions with thin internal cavities. Engrg. Analy. Boundary Elem., 6:180-184, 1989.
108. L. J. Gray. Symbolic computation of hypersingular boundary integrals. In J. H. Kane, G. Maier, N. Tosaka, and S. N. Atluri, editors, Advances in boundary element techniques, pages 157-172. Springer-Verlag, Berlin Heidelberg, 1993.
109. L. J. Gray. Evaluation of singular and hypersingular Galerkin boundary integrals: direct limits and symbolic computation. In V. Sladek and J. Sladek, editors, Singular Integrals in the Boundary Element Method, Advances in Boundary Elements, chapter 2, pages 33-84. Computational Mechanics Publishers, 1998.
110. L. J. Gray and S. J. Chang. Hypersingular formulation for 2D elastic wave scattering. Engrg. Analy. Boundary Elem., 10(4):337-344, 1992.
111. L. J. Gray and M. Garzon. On a Hermite boundary integral approximation. Computers and Structures, 83(10-11):889-894, 2005.
112. L. J. Gray, J. Glaeser, and T. Kaplan. Direct evaluation of hypersingular Galerkin surface integrals. SIAM J. Sci. Comput., 25(5):1534-1556, 2004.
113. L. J. Gray and B. Griffith. A faster Galerkin boundary integral algorithm. Comm. Numer. Meth. Engng., 14:1109-1117, 1998.
114. L. J. Gray, T. Kaplan, J. D. Richardson, and G. H. Paulino. Green's functions and boundary integral analysis for exponentially graded materials: heat conduction. ASME Journal of Applied Mechanics, 70:543-549, 2003.
115. L. J. Gray and E. D. Lutz. On the treatment of corners in the boundary element method. J. Comp. Appl. Math., 32:369-386, 1990.
116. L. J. Gray, L. F. Martha, and A. R. Ingraffea. Hypersingular integrals in boundary element fracture analysis. International Journal for Numerical Methods in Engineering, 29(6):1135-1158, 1990.
117. L. J. Gray and G. H. Paulino. Symmetric Galerkin boundary integral formulation for interface and multi-zone problems. International Journal for Numerical Method in Engineering, 40(16):3085-3101, 1997.
118. L. J. Gray and G. H. Paulino. Symmetric Galerkin boundary integral fracture analysis for plane orthotropic elasticity. Computational Mechanics, 20(1/2):26-33, 1997.
119. L. J. Gray and G. H. Paulino. Crack tip interpolation, revisited. SIAM Journal on Applied Mathematics, 58(2):428-455, 1998.
120. L. J. Gray, A.-V. Phan, and T. Kaplan. Boundary integral evaluation of surface derivatives. SIAM J. Sci. Comput., 26:294-312, 2004.
121. L. J. Gray, A.-V. Phan, G. H. Paulino, and T. Kaplan. Improved quarter-point crack tip element. Engineering Fracture Mechanics, 70(2):269-283, 2003.
122. L. J. Gray and C. San Soucie. Hermite interpolation algorithm for hypersingular boundary integrals. Int. J. Numer. Meth. Engrg., 36:2357-2367, 1993.
123. M. D. Greenberg. Foundations of Applied Mathematics. Prentice-Hall, Englewood Cliffs, New Jersey, 1978.
124. L. Greengard and V. Rokhlin. A new version of the fast multipole method for the Laplace equation in three dimensions. In Acta numerica, 1997, pages 229-269. Cambridge University Press, Cambridge, UK, 1997.
125. S. T. Grilli, P. Guyenne, and F. Dias. A fully nonlinear model for three-dimensional overturning waves over arbitrary bottom. Int. J. Num. Meth. Fluids, 35(7):829-867, 2001.
126. M. Guiggiani. Error indicators for adaptive mesh refinement in the boundary element method - a new approach. International Journal for Numerical Methods in Engineering, 29:1247-1269, 1990.
127. Massimo Guiggiani. The evaluation of Cauchy principal value integrals in the boundary element method - a review. Mathematical and Computer Modelling, 15:175-184, 1991.
128. M. R. Gungor, L. J. Gray, and D. Maroudas. Effects of mechanical stress on electromigration-driven transgranular void dynamics in passivated metallic thin films. Applied Physics Letters, 73(26):3848-3850, 1998.
129. J. Hadamard. Lectures on Cauchy's Problem in Linear Partial Differential Equations. Dover Publications, 1952.
130. W. S. Hall and W. H. Robertson. Advanced boundary element calculations for elastic wave scattering. In M. F. McCarthy and M. A. Hayes, editors, Elastic Wave Propagation, pages 459-464. Elsevier Science Publishers B. V., 1989.
131. W. S. Hall. The Boundary Element Method. Kluwer Academic Publishers, Dordrecht, The Netherlands, 1994.
132. F. Hartmann, C. Katz, and B. Protopsaltis. Boundary elements and symmetry. Ingenieur-Archiv, 55:440-449, 1985.
133. C. Hastings. Approximations for Digital Computers. Princeton University Press, Princeton, NJ, 1955.
134. R. D. Henshell and K. G. Shaw. Crack tip finite elements are unnecessary. International Journal for Numerical Methods in Engineering, 9:495-507, 1975.
135. D. A. Hills, P. A. Kelly, D. N. Dai, and A. M. Korsunsky. Solution of Crack Problems: The Distributed Dislocation Technique. Kluwer Academic Publishers, The Netherlands, 1996.
136. S. M. Hölzer. The symmetric Galerkin BEM for plane elasticity: scope and applications. In C. Hirsch, editor, Numerical Methods in Engineering'92. Elsevier, 1992.
137. M. Ikeuchi and K. Onishi. Boundary elements in transient convective diffusive problems. In C. A. Brebbia, T. Futagami, and M. Tanaka, editors, Boundary Elements V, pages 275-282. Springer, Berlin, 1983.
138. N. I. Ioakimidis. A natural approach to the introduction of finite-part integrals into crack problems of three-dimensional elasticity. Engng. Fract. Mech., 16:669-673, 1982.
139. N. I. Ioakimidis. Exact expression for a two-dimensional finite part integral appearing during the numerical solution of crack problems in three-dimensional elasticity. Comm. Appl. Numer. Methods, 1:183-189, 1985.
140. M. A. Jaswon and G. T. Symm. Integral equation methods in potential theory and elastostatics. Academic Press, New York, 1977.
141. K. L. Johnson. Contact Mechanics. Cambridge University Press, England, 1985.
142. J. Kane and C. Balakrishna. Symmetric Galerkin boundary formulations employing curved elements. International Journal for Numerical Method in Engineering, 36:2157-2187, 1993.
143. J. H. Kane. Boundary Element Analysis in Engineering Continuum Mechanics. Prentice Hall, New Jersey, 1994.
144. A. C. Kaya and F. Erdogan. On the solution of integral equations with strongly singular kernels. Quart. Appl. Math., 45:105-122, 1987.
145. Theodor Kermanidis. Numerical solution for axially symmetrical elasticity problems. International Journal of Solids and Structures, 11(4):493-500, 1975.
146. A. P. Kfouri. Some evaluations of the elastic T-term using Eshelby's method. International Journal of Fracture, 30(4):301-315, 1986.
147. D. R. Khattab, A. H. A. Aziz, and A. S. Hussein. An enhanced www-based scientific data visualization service using VRML. In VRCAI'04: Proceedings of the 2004 ACM SIGGRAPH international conference on Virtual Reality continuum and its applications in industry, pages 134-140. ACM Press, 2004.
148. J.-H. Kim and G. H. Paulino. Finite element evaluation of mixed-mode stress intensity factors in functionally graded materials. International Journal for Numerical Method in Engineering, 53(8):1903-1935, 2002.
149. J.-H. Kim and G. H. Paulino. An accurate scheme for mixed-mode fracture analysis of functionally graded materials using the interaction integral and micromechanics models. International Journal for Numerical Methods in Engineering, 58(10):1457-1497, 2003.
150. J.-H. Kim and G. H. Paulino. T-stress, mixed-mode stress intensity factors, and crack initiation angles in functionally graded materials: A unified approach using the interaction integral method. Computer Methods in Applied Mechanics and Engineering, 192(11):1463-1494, 2003.
151. R. Kitey, A. V. Phan, H. V. Tippur, and T. Kaplan. Modeling of crack growth through particulate clusters in brittle matrix by symmetric-galerkin boundary element method. International Journal of Fracture, 141(1-2):11-25, 2006. Kitey, R. Phan, A.-V. Tippur, H. V. Kaplan, T.
152. V. S. Kothnur, S. Mukherjee, and Y. X. Mukherjee. Two dimensional linear elasticity by the boundary node method. International Journal of Solids and Structures, 36(4):1129-1147, 1999.
153. G. Krishnasamy, L. W. Schmerr, T. J. Rudolphi, and F. J. Rizzo. Hypersingular boundary integral equations: some applications in acoustic and elastic wave scattering. Journal of Applied Mechanics, 57:404-414, 1990.
154. L. A. De Lacerda, L. C. Wrobel, and W. J. Mansur. Boundary integral formulation for two-dimensional acoustic radiation in a subsonic uniform flow. Journal of Acoustic Society of America, 100:98-107, 1996.
155. J. C. Lachat and J. O. Watson. Effective numerical treatment of boundary integral equations: a formulation for three-dimensional elastostatics. International Journal for Numerical Method in Engineering, 10(5):991-1005, 1976.
156. O. E. Lafe and A. H.-D. Cheng. A pertubation boundary element code for steady state groundwater flow in heterogeneous aquifers. Water Resources Research, 23:1079-1084, 1987.
157. O. E. Lafe, J. A. Liggett, and P. L.-F. Liu. BIEM solutions to combination of leaky, layered, confined, unconfined, nonisotropic acquifers. Water Resources Research, 17:1431-1444, 1981.
158. P. Lancaster and K. Salkauskas. Curve and Surface Fitting - An Introduction. Academic Press, London, 1986.
159. S. G. Larsson and A. J. Carlson. Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic-plastic materials. Journal of the Mechanics and Physics of Solids, 21(4):263-277, 1973.
160. P. S. Leevers and J. C. D. Radon. Inherent stress biaxiality in various fracture specimen. International Journal of Fracture, 19(4):311-325, 1982.
161. L. Lehmann and H. Antes. Dynamic structure-soil-structure interaction applying the symmetric galerkin boundary element method (SGBEM). Mechanics Research Communications, 28(3):297-304, 2001.
162. D. Lesnic, L. Elliott, and DB Ingham. Treatment of singularities in time-dependent problems using boundary element method. Engineering Analysis with Boundary Elements, 16:65-70, 1995.
163. B. Q. Li and J. W. Evans. Boundary element solution of heat convection-diffusion problems. Journal of Computational Physics, 93:255-272, 1991.
164. G. Li and N. R. Aluru. Boundary cloud method: a combined scattered point/boundary integral approach for boundary-only analysis. Computer Methods in Applied Mechanics and Engineering, 191(21-22):2337-2370, 2002. 18.
165. S. Li, M. E. Mear, and L. Xiao. Symmetric weak form integral equation method for three-dimensional fracture analysis. Comp. Meth. Appl. Mech. Engng., 151:435-459, 1998.
166. J. A. Liggett and P. L. F. Liu. Unsteady flow in confined aquifers: A comparison of boundary integral methods. Water Resources Research, 15:861-866, 1979.
167. J. A. Liggett and P. L. F. Liu. The boundary integral equation method for porous media flow. George Allen & Unwin, England, 1983.
168. J. L. Lions and R. Dautray. Approximation des équations intégrales paréléments finis. etude d'erreur. In Analyse mathématique et calculscientifique pour les sciences et les techniques (Chapter 13), pages 953-968. Masson, Paris, 1985.
169. G. R. Liu. Mesh free methods: Moving beyond the finite element method. CRC Press LLC, Boca Raton, Florida, 2003.
170. E. D. Lutz. A novel boundary element method for linear elasticity. PhD thesis, Cornell University, Ithaca, New York, USA, 1994.
171. Singh K. M. and M. Tanaka. On exponential variable transformation based boundary element formulation for advection-diffusion problems. Engineering Analysis with Boundary Elements, 24:225-235, 2000.
172. G. Kuhn M. Haas. A symmetric Galerkin BEM implementation for 3D elastostatic problems with an extension to curved elements. Comp. Mech., 28:250-259, 2002.
173. G. Maier, M. Diligenti, and A. Carini. A variational approach to boundary element elastodynamic analysis and extension to multidomain problems. Comp. Meth. Appl. Engng., 92:193-213, 1991.
174. G. Maier, S. Miccoli, G. Novati, and S. Sirtori. A Galerkin symmetric boundary element methos in plasticity: formulation and implementation. In J. H. Kane, G. Maier, N. Tosaka, and S. N. Atluri, editors, Advances in Boundary Element Techniques, pages 288-328. Springer-Verlag, Berlin Heidelberg, 1993.
175. G. Maier, G. Novati, and S. Sirtori. On symmetrization in boundary element elastic and elastoplastic analysis. In G. Kuhn and H. Mang, editors, Discretization methods in structural mechanics, pages 191-200. Springer-Verlag, Berlin and New York, 1990.
176. G. Maier and C. Polizzotto. A Galerkin approach to boundary element elastoplastic analysis. Computer Methods in Applied Mechanics and Engineering, 60:175-194, 1987.
177. D. Maillet, S. Andre, J. C. Batsale, A. Degiovanni, and C. Moyne. Numerical Fracture Mechanics. Thermal Quadrupoles Solving the Heat Equation through Integral Transforms, John Wiley and Sons, 2000.
178. M. Mayr. On the numerical solution of axisymmetric elasticity problems using an integral equation approach. Mech. Res. Comm., 3:393-398, 1976.
179. B. H. McCormick, T. A. DeFanti, and M. D. Brown. Visualization in Scientific Computing. Computer Graphics, 21(6), 1987.
180. G. Menon. Hypersingular error estimates in boundary element methods. Master's thesis, Cornell University, Ithaca, NY, 1996.
181. M. G. Duffy. Quadrature over a pyramid or cube of integrands with a singularity at a vertex. SIAM J Numer. Analy., 19:1260-1262, 1982.
182. J. H. Michell. Elementary distributions of plane stress. Proceedings of the London Mathematical Society, 32:35-61, 1900.
183. L. M. Milne-Thomson. Elliptic integrals. In M. Abramowitz and I. A. Stegun, editors, Handbook of Mathematical Functions, pages 587-626. Dover Publications, 1965.
184. Y. Miyamoto, W. A. Kaysser, B. H. Rabin, A. Kawasaki, and R. G. Ford. Functionally Graded Materials: Design, Processing and Applications. Kluwer Academic Publishers, Dordrecht, 1999.
185. M. N. J. Moore, L. J. Gray, and T. Kaplan. Evaluation of supersingular integrals: second order boundary derivatives. Int. J. Num. Meth. Engng., 69:1930-1947, 2007.
186. G. J. Moridis and D. L. Reddell. The Laplace transform boundary element (LTBE) method for the solution of diffusion-type equations. In C. A. Brebbia and G. S. Gipson, editors, BEM XIII, pages 83-97. Computational Mechanics Publications, 1991.
187. K. H. Muci-Küchler and J. C. Miranda-Valenzuela. A new error indicator based on stresses for adaptive meshing with hermite boundary elements. Engng. Analy. Boundary Elements, 23:657-670, 1999.
188. K. H. Muci-Küchler and T. J. Rudolphi. Coincident collocation of displacement and tangent derivative boundary integral equations in elasticity.
189. K. H. Muci-Küchler and T. J. Rudolphi. Application of tangent derivative boundary integral equations to the formulation of higher order boundary elements. Int. J. Solid Struct., 31:1565-1584, 1994.
190. S. Mukherjee. Boundary Element Methods in Creep and Fracture. Elsevier Applied Science Publishers, England, 1982.
191. S. Mukherjee and Y. X. Mukherjee. Boundary Methods: Elements, Contours, and Nodes. CRC Press, Boca Raton FL, 2005.
192. S. Mukherjee and Y. X. Mukherjee. The hypersingular boundary contour method for three-dimensional linear elasticity. ASME Journal of Applied Mechanics, 65:300-309, 1998.
193. Y. X. Mukherjee and S. Mukherjee. The boundary node method for potential problems. International Journal for Numerical Methods in Engineering, 40:797-815, 1997.
194. A. Nagarajan, E. Lutz, and S. Mukherjee. A novel boundary element for linear elasticity with no numerical integration for two-dimensional and line integrals for three-dimensional problems. ASME Journal of Applied Mechanics, 61(2):264-269, 1994.
195. A. Nagarajan, S. Mukherjee, and E. Lutz. The boundary contour method for three-dimensional linear elasticity. Journal of Applied Mechanics, 63:278-286, 1996.
196. T. Nakamura and D. M. Parks. Determination of T-stress along three-dimensional crack fronts using an interaction integral method. International Journal of Solids and Structures, 29(13):1597-1611, 1992.
197. B. Nayroles, G. Touzot, and P. Villon. Generalizing the finite element method: diffuse approximation and diffuse elements. Computational Mechanics, 10:307-318, 1992.
198. John S. Newman. Electrochemical Systems. Prentice Hall, Englewood Cliffs, New Jersey, 1991.
199. L. Nicolazzi, C. A. Duarte, E. Fancello, and C. Barcellos. Hp-clouds - a meshless method in boundary elements. part I: Formulation. Boundary Element Communications, 8:80-82, 1997.
200. L. Nicolazzi, C. A. Duarte, E. Fancello, and C. Barcellos. Hp-clouds - a meshless method in boundary elements. part II: Implementation. Boundary Element Communications, 8:83-85, 1997.
201. G. Novati and R. Springhetti. A Galerkin boundary contour method for twodimensional linear elasticity. Computational Mechanics, 23:53-62, 1999.
202. A. J. Nowak. The multiple reciprocity method of solving transient heat conduction problems. In C. A. Brebbia and J. J. Connor, editors, BEM XI, pages 81-95. Computational Mechanics Publications, Springer-Verlag, 1989.
203. N. P. O'Dowd, C. F. Shih, and R. H. Dodds Jr. The role of geometry and crack growth on constraint and implications for ductile/brittle fracture. In Constraint Effects in Fracture Theory and Applications, volume 2 of ASTM STP 1244, pages 134-159. American Society for Testing and Materials, 1995.
204. F. W. J. Olver. Bessel functions of integer order. In M. Abromowitz and I. A. Steegun, editors, Handbook of mathematical functions, chapter 9, pages 355-434. National Bureau of Standards, Washington, D. C., 1972.
205. F. Paris and J. Canãs. Boundary Element Method. Oxford University Press Inc., New York, 1997.
206. P. W. Partridge, C. A. Brebbia, and L. C. Wrobel. The Dual Reciprocity Boundary Element Method. Computational Mechanics Publications, Southampton and Boston, 1992.
207. R. Pasquetti, A. Caruso, and Wrobel LC. Transient problems using time-dependent fundamental solutions. In L. C. Wrobel and C. A. Brebbia, editors, Boundary Element Methods in Heat transfer, pages 33-62. Computational Mechanics Publications, Southampton Boston, 1992.
208. G. H. Paulino. Novel formulations of the boundary element method for fracture mechanics and error estimation. PhD thesis, Cornell University, 1995.
209. G. H. Paulino and L. J. Gray. Galerkin residuals for adaptive symmetric-Galerkin boundary element methods. Journal of Engineering Mechanics (ASCE), 125(5):575-585, 1999.
210. G. H. Paulino, L. J. Gray, and V. Zarikian. Hypersingular residuals - A new approach for error estimation in the boundary element method. International Journal for Numerical Methods in Engineering, 36(12):2005-2029, 1996.
211. G. H. Paulino, Z. H. Jin, R. H. Dodds. Failure of functionally graded materials. In Comprehensive Structural Integrity, Karihaloo B, Knauss WG (eds), vol. 2, Chapter 13. Elsevier: Amsterdam, 2003;607-644.
212. G. H. Paulino and J.-H. Kim. A new approach to compute T-stress in functionally graded materials using the interaction integral method. Engineering Fracture Mechanics, 2003; Eng Fract Mech, Volume: 71, Issue: 13-14(2004), pp. 1907-1950.
213. G. H. Paulino and A. Sutradhar. The simple boundary element method for multiple cracks in functionally graded media governed by potential theory: a three-dimensional Galerkin approach. International Journal for Numerical Methods in Engineering, 65:2007-2034, 2006.
214. G. H. Paulino, Alok Sutradhar, and L. J. Gray. Boundary element methods for functionally graded materials. In Boundary Element Technology, Brebbia CA, Dippery RE (eds), vol. XV, Section 3. WIT Press: Southampton, 2003;137-146.
215. J. J. Perez-Gavilan and M. H. Aliabadi. A symmetric Galerkin BEM for harmonic problems and multiconnected bodies. Meccanica, 36(4):449-462, 2001.
216. J. J. Perez-Gavilan and M. H. Aliabadi. A symmetric Galerkin boundary element method for dynamic frequency domain viscoelastic problems. Computers & Structures, 79(29-30):2621-2633, 2001.
217. J. J. Perez-Gavilan and M. H. Aliabadi. Symmetric Galerkin BEM for shear deformable plates. International Journal for Numerical Methods in Engineering, 57(12):1661-1693, 2003.
218. A. V. Phan, L. J. Gray, and T. Kaplan. On some benchmark results for the interaction of a crack with a circular inclusion. Journal of Applied Mechanics-Transactions of the ASME, 74(6):1282-1284, 2007. Phan, A.-V. Gray, L. J. Kaplan, T.
219. A.-V. Phan, T. Kaplan, L. J. Gray, D. Adelsteinsson, J. A. Sethian, W. Barvosa-Carter, and M. A. Aziz. Modeling a growth instability in a stressed solid. Modelling Simul. Mater. Sci. Eng., 9:309-325, 2001.
220. A-V. Phan, S. Mukherjee, and Mayer J. R. R. The boundary contour method for two-dimensional linear elasticity with quadratic boundary elements. Computational Mechanics, 20:310-319, 1997.
221. A-V. Phan, S. Mukherjee, and Mayer J. R. R. The hypersingular boundary contour method for two-dimensional linear elasticity. Acta Mechanica, 130:209-225, 1998.
222. A. V. Phan, J. A. L. Napier, L. J. Gray, and T. Kaplan. Stress intensity factor analysis of friction sliding at discontinuity interfaces and junctions. Computational Mechanics, 32(4-6):392-400, 2003.
223. A.-V. Phan, J. A. L. Napier, L. J. Gray, and T. Kaplan. Symmetric-Galerkin BEM simulation of fracture with frictional contact. International Journal for Numerical Methods in Engineering, 57(6):835-851, 2003.
224. Joel R. Phillips and Jacob K. White. A precorrected-FFT method for electrostatic analysis of complicated 3-D structures. IEEE Trans. Comput. Aided Design of Integrated Circuits and Systems, 16:1059-1071, 1997.
225. A. P. Pierce and J. A. L. Napier. A spectral multipole method for efficient solution of large-scale boundary element models in elastostatics. International Journal for Numerical Method in Engineering, 38:4009-4034, 1995.
226. C. Polizzotto. A symmetric Galerkin boundary/domain element method for finite elastic deformations. Computer Methods in Applied Mechanics and Engineering, 189(2):481-514, 2000.
227. D. Poljak. Foreword to EABE special issue on electromagnetics. Engineering Analysis with Boundary Elements, 27(4), 2003.
228. Pasquetti A. Caruso R. Boundary element approach for transient and non-linear thermal diffusion. Num Heat Transf, PartB, 17:83-99, 1990.
229. P. A. Ramanchandran. Boundary element methods in transport phenomena. Elsevier, London, 1994.
230. J. N. Reddy and A. Miravete. Practical Analysis of Composite Laminates. CRC Press, Boca Raton, 1995.
231. B. Reidinger and O. Steinbach. A symmetric boundary element method for the Stokes problem in multiple connected domains. Mathematical Methods in the Applied Sciences, 26(1):77-93, 2003.
232. J. J. Rencis and K. Y. Yong. A self-adaptive h-refinement technique for the boundary element method. Comp. Meth. Appl. Mech. Eng., 73:295-316, 1989.
233. J. R. Rice. Mathematical analysis in the mechanics of fracture. In H. Liebowitz, editor, Fracture - An Advanced Treatise, volume II, pages 191-311. Pergamon Press, Oxford, 1968.
234. F. Rizzo and D. J. A. Shippy. Method of solution for certain problems of transient heat conduction. AIAA Journal, 8:2004-2009, 1970.
235. F. J. Rizzo. An integral equation approach to boundary value problems of classical elastostatics. Quart. Appl. Math., 25:83-95, 1967.
236. F. J. Rizzo, D. J. Shippy, and M. Rezayat. A boundary integral equation method for radiation and scattering of elastic waves in three dimensions. Int. J. Numer. Meth. Engrg., 21:115-129, 1985.
237. S. Rjasanow and O. Steinbach. The Fast Solution of Boundary Integral Equations. Springer, Berlin, 2007.
238. T. J. Rudolphi and K. H. Muci-Küchler. Consistent regularization of both kernels in hypersingular integral equations. In C. A. Brebbia and G. S. Gipson, editors, Boundary Elements XIII, pages 875-887, Southampton and Boston, 1991. Computational Mechanics.
239. M. A. Sales and L. J. Gray. Evaluation of the anisotropic Green's function and its derivatives. Computers and Structures, 69(2):247-254, 1998.
240. Alberto Salvadori. Quasi brittle fracture mechanics by cohesive crack models and symmetric Galerkin boundary element method. PhD thesis, Politecnico Milano, Milan, Italy, 1999.
241. Alberto Salvadori. Analytical integrations of hypersingular kernel in 3D BEM problems. Comp. Meth. in Appl. Mech. Engng., 190:3957-3975, 2001.
242. Alberto Salvadori. Analytical integrations in 2D BEM elasticity. International Journal for Numerical Method in Engineering, 53:1695-1719, 2002.
243. A. H. Schatz, V. Thomée, and W. L. Wendland. Mathematical Theory of Finite and Boundary Element Methods. Birkhäuser, Basel, Boston, & Berlin, 1990.
244. W. Schroeder, K. Martin, and W. Lorensen. The Visualization Toolkit: An Object Oriented Approach to 3D Graphics 3rd Edition. Kitware, Inc., 2003.
245. C. Schwab and W. L. Wendland. On the extraction technique in boundary integral equations. Math. Comp., 68(225):91-122, 1999.
246. J. A. Sethian. Curvature and the evolution of fronts. Comm. Math. Phys., 101:487-499, 1985.
247. J. A. Sethian. Level Set Methods and Fast Marching Methods: Evolving Interfaces in Computational Geometry, Fluid Mechanics, Computer Vision, and Materials Science. Cambridge University Press, Cambridge, 1999.
248. T. L. Sham. The determination of the elastic T-term using higher-order weight functions. International Journal of Fracture, 48(2):81-102, 1991.
249. R. Shaw. An integral equation approach to diffusion. International Journal of Heat and Mass transfer, 17:693-699, 1974.
250. R. P. Shaw. Green's functions for heterogeneous media potential problems. Engineering Analysis with Boundary Elements, 13:219-221, 1994.
251. R. P. Shaw and G. S. Gipson. Interrelated fundamental solutions for various heterogeneous potential, wave and advective-diffusive problems. Engineering Analysis with Boundary Elements, 16:29-34, 1995.
252. R. P. Shaw and G. D. Manolis. Two dimensional heat conduction in graded materials using conformal mapping. Communications in Numerical Methods in Engineering, 19:215-221, 2003.
253. N. I. Shbeeb, W. K. Binienda, and K. L. Kreider. Analysis of the driving forces for multiple cracks in an infinite nonhomogeneous plate, part II: Numerical solutions. Journal of Applied Mechanics, 66(2):501-506, 1999.
254. W. R. Sherman and A. B. Craig. Understanding Virtual Reality: Interface, Application and Design. Morgan Kaufmann, 2003.
255. F. Shi, P. Ramesh, and S. Mukherjee. Adaptive mesh refinement of the boundary element method for potential problems by using mesh sensitivities as error indicators. Computational Mechanics, 16(6):379-395, 1995.
256. S. Sirtori. General stress analysis method by means of integral equations and boundary elements. Meccanica, 14:210-218, 1979.
257. S. Sirtori, G. Maier, G. Novati, and S. Miccoli. A Galerkin symmetric boundary element method in elasticity: formulation and implementation. International Journal for Numerical Methods in Engineering, 35(2):255-282, 1992.
258. J. Sladek and V. Sladek. Evaluation of T-stresses and stress intensity factors in stationary thermoelasticity by the conservation integral method. International Journal of Fracture Mechanics, 86(3):199-219, 1997.
259. J. Sladek, V. Sladek, and S. N. Atluri. Local boundary integral equation (LBIE) method for solving problems of elasticity with nonhomogeneous material properties. Computational Mechanics, 24:456-462, 2000.
260. J. Sladek, V. Sladek, and P. Fedelinski. Contour integrals for mixed-mode crack analysis: effect of nonsingular terms. Theoretical and Applied Fracture Mechanics, 27(2):115-127, 1997.
261. D. J. Smith, M. R. Ayatollahi, and M. J. Pavier. The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading. Fatigue & Fracture of Engineering Materials & Structures, 24(2):137-150, 2001.
262. G. D. Smith. Numerical Solution of Partial Differential Equations: Finite Difference Methods. Oxford Univ. Press, second edition, 1985.
263. H. Stehfest. Algorithm 368: Numerical inversion of Laplace transform. Communications of the Association for Computing Machinery, 13:47-19, 1970.
264. H. Stehfest. Remarks on algorithm 368: Numerical inversion of Laplace transform. Communications of the Association for Computing Machinery, 13:624, 1970.
265. E. A. Sudicky. The Laplace transform Galerkin technique: a time-continuous finite element theory and application to mass transport in groundwater. Water Resources Research, 25:1833-1846, 1989.
266. S. Suresh and A. Mortensen. Fundamentals of Functionally Graded Materials. The Institute of Materials, IOM Communications Ltd., London, 1998.
267. A. Sutradhar. Galerkin boundary element modeling of three-dimensional graded material systems. PhD thesis, University of Illinois at Urbana-Champaign, 2005.
268. A. Sutradhar and G. H. Paulino. A simple boundary element method for problems of potential in nonhomogeneous media. International Journal for Numerical Methods in Engineering, 60:2203-2230, 2004.
269. A. Sutradhar and G. H. Paulino. A simple boundary element method for transient heat conduction in functionally graded materials. Computer Methods in applied mechanics and engineering, 193:4511-4539, 2004.
270. A. Sutradhar and G. H. Paulino. Symmetric galerkin boundary element computation of T-stress and stress intensity factors for mixed-mode cracks by the interaction integral method. Engineering Analysis with Boundary Elements, 28(11):1335-1350, 2004.
271. A. Sutradhar, G. H. Paulino, and L. J. Gray. On hypersingular surface integrals in the symmetric Galerkin boundary element method: Application to heat conduction in exponentially graded materials. International Journal for Numerical Methods in Engineering, 62:122-157, 2005.
272. A. Talbot. The accurate numerical inversion of Laplace transforms. Journal of the Institute of Mathematics and Its Applications, 23:97-120, 1979.
273. M. Tanaka and T. A. Cruse. Boundary element methods in applied mechanics. Pergamon Press, Oxford, 1988.
274. M. Tanaka, T. Matsumoto, and Y. Suda. A dual reciprocity boundary element method applied to the steady-state heat conduction problem of functionally gradient materials. Electronic Journal of Boundary Elements, BETEQ 2001, No. 1:128-135, 2002.
275. M. Tanaka, V. Sladek, and J. Sladek. Regularization techniques applied to boundary element methods. Applied Mechanics Reviews, 47(10):457-499, 1994.
276. J. C. F. Telles. A self-adaptive co-ordinate transformation for efficient numerical evaluation of general boundary element integrals. International Journal for Numerical Method in Engineering, 24(5):959-973, 1987.
277. S. P. Timoshenko and J. N. Goodier. Theory of Elasticity. McGraw-Hill, New York, 3rd edition, 1976.
278. S. P. Timoshenko and J. N. Goodier. Theory of Elasticity, 3rd Edition. McGraw-Hill, New York, 1987.
279. K. Tomlinson, C. Bradley, and A. Pullan. On the choice of a derivative boundary element formulation using Hermite interpolation. International Journal for Numerical Methods in Engineering, 39(3):451-468, 1996.
280. Yukio Ueda, Kazuo Ikeda, Tetsuya Yao, and Mitsuru Aoki. Characteristics of brittle fracture under general combined modes including those under bi-axial tensile loads. Engineering Fracture Mechanics, 18(6):1131-1158, 1983.
281. G. J. Van Berkel. The electrolytic nature of electrospray. In R. B. Cole, editor, Electrospray Ionization Mass Spectroscopy, chapter 2, pages 65-105. John Wiley, New York, 1997.
282. G. J. Van Berkel, G. E. Giles, J. S. Bullock, and L. J. Gray. Computational simulation of redox reactions within a metal electrospray emitter. Analytical Chemistry, 71:5288-5296, 1999.
283. Y.-Y. Wang and D. M. Parks. Evaluation of the elastic T-stress in surface-cracked plates using the line-spring method. International Journal of Fracture, 56(1):25-40, 1992.
284. J. O. Watson. Hermitian cubic and singular elements for plain strain. In P. K. Banerjee and J. O. Watson, editors, Developments in Boundary Element Methods - Vol. 4, chapter 1, pages 1-28. Elsevier Applied Science Publishers, London and New York, 1986.
285. W. T. Weeks. Numerical inversion of Laplace transforms using Laguerre functions. Journal of the Association for Computing Machinery, 13:419-429, 1966.
286. P. H. Wen and M. H. Aliabadi. A contour integral for the evaluation of stress intensity factors. Applied Mathematical Modelling, 19(8):450-455, 1995.
287. E. T. Whittaker and G. N. Watson. A Course of Modern Analysis. Cambridge University Press, Cambridge, MA, 1927.
288. J. G. Williams and P. D. Ewing. Fracture under complex stress - the angled crack problem. International Journal of Fracture, 8(4):441-416, 1972.
289. M. L. Williams. On the stress distribution at the base of a stationary crack. Journal of Applied Mechanics, Transactions ASME, 24(1):109-114, 1957.
290. R. C. Williams, A. V. Phan, H. V. Tippur, T. Kaplan, and L. J. Gray. SGBEM analysis of crack-particle (s) interactions due to elastic constants mismatch. Engineering Fracture Mechanics, 74(3):314-331, 2007.
291. R. B. Wilson and T. A. Cruse. Efficient implementation of anisotropic three dimensional boundary-integral equation stress analysis. International Journal for Numerical Methods in Engineering, 12:1383-1397, 1978.
292. L. C. Wrobel. The boundary element method: Applications in Thermofluids and Acoustics. Wiley, Chichester, 2002.
293. L. C. Wrobel and C. A. Brebbia. The boundary element for steady state and transient heat conduction. In R. W. Lewis and K Morgan, editors, Numerical Methods in thermal problems, pages 58-73. Pineridge Press, Swansea, 1979.
294. L. C. Wrobel and C. A. Brebbia. The dual reciprocity boundary element formulation for non-linear diffusion problems. Computer Methods in Applied Mechanics and Engineering, 65:147-164, 1987.
295. T. W. Wu and L. Lee. A direct boundary integral formulation for acoustic radiation in a subsonic uniform flow. Journal of Sound and Vibration, 175:51-63, 1994.
296. K. Xu, S. T. Lie, and Z. Cen. Crack propagation analysis with galerkin boundary element method. International Journal for Numerical and Analytical Methods in Geomechanics, 28(5):421-435, 2004.
297. J. F. Yau, S. S. Wang, and H. T. Corten. A mixed-mode crack analysis of isotropic solids using conservation laws of elasticity. Journal of Applied Mechanics, Transactions ASME, 47(2):335-341, 1980.
298. N. G. Zamani, J. F. Porter, and A. A. Mufti. A survey of computational efforts in the field of corrosion engineering. International Journal for Numerical Method in Engineering, 23(7):1295-1311, 1986.
299. X. F. Zhang, Y. H. Liu, and Z. Z. Cen. A solution procedure for lower bound limit and shakedown analysis by SGBEM. Acta Mechanica Solida Sinica, 14(2):118-129, 2001.
300. Zhiye Y. Zhao and Shengrui Lan. Boundary stress calculation - a comparison study. Computers and Structures, 71(1):77-85, 1999.
301. S. P. Zhu and P. Satravaha. An efficient computational method for nonlinear transient heat conduction problems. Applied Mathematical Modeling, 20:513-522, 1996.
302. S. P. Zhu, P. Satravaha, and X. Lu. Solving linear diffusion equations with the dual reciprocity method in laplace space. Engineering Analysis with Boundary Elements, 13:1-10, 1994.
303. T. Zhu, J-D. Zhang, and S. N. Atluri. A local boundary integral equation (LBIE) method in computational mechanics, and a meshless discretization approach. Computational Mechanics, 21:223-235, 1998.
304. th Edition, 1991.