Composites for Construction: Structural Design with FRP Materials

Composites for Construction: Structural Design with FRP Materials

Volumn , Issue , 2007, Pages 1-551

  Bank, Lawrence C ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84889421302     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470121429     Document Type: Book

References (304)

1. AASHTO (1997), Guide Specification for Design of Pedestrian Bridges, American Association of State Highway and Transportation Officials, Washington, DC.
2. AASHTO (2001), Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals, 4th ed., American Association of State Highway and Transportation Officials, Washington, DC.
3. AASHTO (2002), Standard Specification for Highway Bridges, 17th ed., American Association of State Highway and Transportation Officials, Washington, DC.
4. AASHTO (2005), LRFD Bridge Design Specifications, 3rd ed., American Association of State Highway and Transportation Officials, Washington, DC.
5. Abd-el-Naby, S. F. M., and Hollaway, L. (1993a), 'The experimental behavior of bolted joints in pultruded glass/polyester material, 1: single bolt joints, Composites, Vol. 24, pp. 531-538.
6. Abd-el-Naby, S. F. M. (1993b), The experimental behavior of bolted joints in pultruded glass /polyester material, 2: two-bolt joints, Composites, Vol. 24, pp. 539-546.
7. AC 125 (1997), Acceptance Criteria for Concrete and Reinforced and Unreinforced Masonry Strengthening Using Fiber-Reinforced Polymer (FFP) Composite Systems, ICC Evaluation Service, Whittier, CA.
8. AC 187 (2001), Acceptance Criteria for Inspection and Verification of Concrete and Reinforced and Unreinforced Masonry Strengthening Using Fiber-Reinforced Polymer (FFP) Composite Systems, ICC Evaluation Service, Whittier, CA.
9. ACI (1995), Building Code Requirements for Structural Concrete and Commentary, ACI 318-95, American Concrete Institute, Farmington Hills, MI.
10. ACI (1996), State-of-the-Art Report on Fiber Reinforced Plastic (FRP) Reinforcement for Concrete Structures, ACI 440R-96, American Concrete Institute, Farmington Hills, MI.
11. ACI (1999), Building Code Requirements for Structural Concrete and Commentary, ACI 318-99, American Concrete Institute, Farmington Hills, MI.
12. ACI 318-99 (2001), Guide for the Design and Construction of Concrete Reinforced with FRP Bars, ACI 440.1R-01, American Concrete Institute, Farmington Hills, MI.
13. ACI 318-99 (2002), Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, ACI 440.2R-02, American Concrete Institute, Farmington Hills, MI.
14. ACI 318-99 (2003), Guide for the Design and Construction of Concrete Reinforced with FRP Bars, ACI 440.1R-03, American Concrete Institute, Farmington Hills, MI.
15. ACI 318-99 (2004a), Guide Test Methods for Fiber Reinforced Polymers (FRP) for Reinforcing or Strengthening Concrete Structures, ACI 440.3R-04, American Concrete Institute, Farmington Hills, MI.
16. ACI 318-99 (2004b), Prestressing Concrete Structures with FRP Tendons, ACI 440.4R-04, American Concrete Institute, Farmington Hills, MI.
17. ACI 318-99 (2005), Building Code Requirements for Structural Concrete and Commentary, ACI 318-05, American Concrete Institute, Farmington Hills, MI.
18. ACI 318-99 (2006), Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars, ACI 440.1R-06, American Concrete Institute, Farmington Hills, MI.
19. Adams, D. F., Carlsson, L. A., and Pipes, R. B. (2003), Experimental Characterization of Advanced Composite Materials, 3rd ed., CRC Press, Boca Raton, FL.
20. Agarwal, B. D., and Broutman, L. J., (1990), Analysis and Performance of Fiber Composites, 2nd ed., Wiley, New York.
21. AISC (2005), Specification for Structural Steel Buildings and Commentary, ANSI/AISC 360-05, American Institute of Steel Construction, Chicago.
22. Alias, M. N., and Brown, R. (1992), Damage to composites from electrochemical processes, Corrosion, Vol. 48, pp. 373-378.
23. Alkhrdaji, T., Nanni, A., and Mayo, R. (2000), Upgrading Missouri transportation infrastructure: Solid reinforced-concrete decks strengthened with fiber-reinforced polymer systems, Transportation Research Record 1740, National Research Council, pp. 157-163.
24. Alqam, M., Bennett, R. M., and Zureick, A. H. (2002), Three-parameter vs. twoparameter Weibull distribution for pultruded composite material properties, Composite Structures, Vol. 58, pp. 497-503.
25. An, W., Saadatmanesh, H., and Ehsani, M. R. (1991), RC beams strengthened with FRP plates, II: analysis and parametric study, Journal of Structural Engineering, Vol. 117, No. 11, pp. 3434-3455.
26. ANSI (2000), American National Standard for Ladders-Portable Reinforced Plastic-Safety Requirements, ANSI A14.5-2000, American National Standards Institute, Chicago.
27. Antonopoulos, C. P., and Triantafillou, T. C. (2003), Experimental investigation of FRP-strengthened RC beam-column joints, Journal of Composites for Construction, Vol. 7, No. 1, pp. 39-49.
28. Arduini, M., and Nanni, A. (1997), Behavior of precracked RC beams strengthened with carbon FRP sheets, Journal of Composites for Construction, Vol. 1, No. 2, pp. 63-70.
29. ASCE (1984), Structural Plastics Design Manual, ASCE Manuals and Reports on Engineering Practice 63, American Society of Civil Engineers, Reston, VA.
30. ASCE (2002), Minimum Design Loads for Buildings and Other Structures, ASCE 7-02 American Society of Civil Engineers, Reston, VA.
31. ASCE (2003), Recommended Practice for Fiber-Reinforced Polymer Products for Overhead Utility Line Structures, ASCE Manuals and Reports on Engineering Practice 104, American Society of Civil Engineers, Reston, VA.
32. ASTM (2006), Book of Standards, American Society for Testing and Materials, West Conshohocken, PA.
33. Bakht, B., et al. (2000), Canadian bridge design code provisions for fiber-reinforced concrete, Journal of Composites for Construction, Vol. 4, No. 1, pp. 3-15.
34. Bakis, C. E., Bank, L. C., Brown, V. L., Cosenza, E., Davalos, J. F., Lesko, J. J. Machida, A., Rizkalla, S. H., and Triantafilliou, T. C. (2002), Fiber-reinforced polymer composites for construction: state-of-the-art review, Journal of Composites for Construction, Vol. 6, No. 2, pp. 73-87.
35. Balsamo, A., Colombo, A., Manfredi, G., Negro, P., and Prota, A. (2005), Seismic behavior of a full-scale RC frame repaired using CFRP laminates, Engineering Structures, Vol. 27, pp. 769-780.
36. Bank, L. C. (1987), Shear coefficients for thin-walled composite beams, Composite Structures, Vol. 8, pp. 47-61.
37. Bank, L. C. (1989a), Flexural and shear moduli of full-section fiber reinforced plastic (FRP) pultruded beams, Journal of Testing and Evaluation, Vol. 17, No. 1, pp. 40-45.
38. Bank, L. C. (1989b), Properties of Pultruded Fiber Reinforced Plastic (FRP) Structural Members, Transportation Research Record 1223, National Research Council, Washington, DC, pp. 117-124.
39. Bank, L. C. (1990), Modifications to beam theory for bending and twisting of open-section composite beams, Composite Structures, Vol. 15, pp. 93-114.
40. Bank, L. C. (1993a), FRP reinforcements for concrete, in Fiber-Reinforced Plastic (FRP) for Concrete Structures: Properties and Applications (ed. A. Nanni), Elsevier Science, New York, pp. 59-86.
41. Bank, L. C. (1993b), Questioning composites, Civil Engineering, Vol. 63, No. 1, pp. 64-65.
42. Bank, L. C., and Melehan, T. P. (1989), Shear coefficients for multicelled thin-walled composite beams, Composite Structures, Vol. 11, pp. 259-276.
43. Bank, L. C., and Mosallam, A. S. (1992), Creep and failure of a full-size fiber reinforced plastic pultruded frame, Composites Engineering, Vol. 2, pp. 213-227.
44. Bank, L. C., and Yin, J. (1996), Buckling of orthotropic plates with free and rotationally restrained unloaded edges, Thin-Walled Structures, Vol. 24, pp. 83-96.
45. Bank, L. C. (1999), Analysis of progressive failure of the web-flange junction in postbuckled pultruded I-beams, Journal of Composites for Construction, Vol. 3, pp. 177-184.
46. Bank, L. C., and Xi, Z. (1993), Pultruded FRP grating reinforced concrete slabs, in Fiber-Reinforced Plastic for Concrete Structures: International Symposium (ed. A. Nanni and C. W. Dolan), SP-138, American Concrete Institute, Farmington Hills, MI, pp. 561-583.
47. Bank, L. C., Barkatt, A., and Gentry, T. R. (1995b), Accelerated test methods to determine the long-term behavior of FRP composite structures: environmental effects, Journal of Reinforced Plastics and Composites, Vol. 14, No. 6, pp. 559-587.
48. Bank, L. C., Gentry, T. R., and Nadipelli, M. (1996a), Local buckling of pultruded FRP beams: analysis and design, Journal of Reinforced Plastics and Composites, Vol. 15, pp. 283-294.
49. Bank, L. C., Mosallam, A. S., and Gonsior, H. E. (1990), Beam-to-column connections for pultruded FRP structures, in Proceedings of the First Materials Engineering Congress (ed. B. Suprenant), Denver, CO, August 13-15, ASCE, Reston, VA, pp. 804-813.
50. Bank, L. C., Mosallam, A. S., and McCoy, G. T. (1994a), Design and performance of connections for pultruded frame structures, Journal of Reinforced Plastics and Composites, Vol. 13, pp. 199-212.
51. Bank, L. C., Nadipelli, M., and Gentry, T. R. (1994b), Local buckling and failure of pultruded fiber-reinforced plastic beams, Journal of Engineering Materials and Technology, Vol. 116, pp. 233-237.
52. Bank, L. C., Puterman, M., and Katz, A. (1998), The effect of material degradation on bond properties of FRP reinforcing bars in concrete, ACI Materials Journal, Vol. 95, No. 3, pp. 232-243.
53. Bank, L. C., Yin, J., and Nadipelli, M. (1995a), Local buckling of pultruded beams: nonlinearity, anisotropy and inhomogeneity, Construction and Building Materials, Vol. 9, No. 6, pp. 325-331.
54. Bank, L. C., Yin, J., Moore, L. E., Evans, D., and Allison, R. (1996b), Experimental and numerical evaluation of beam-to-column connections for pultruded structures, Journal of Reinforced Plastics and Composites, Vol. 15, pp. 1052-1067.
55. Bank, L. C., Gentry, T. R., Thompson B. P., and Russell, J. S. (2003), A model specification for FRP composites for civil engineering structures, Construction and Building Materials, Vol. 17, No. 6-7, pp. 405-437.
56. Bank, L. C., Oliva, M. G., Russell, J. S., Jacobson, D. A., Conachen, M., Nelson, M., and McMonigal, D. (2006), Double layer prefabricated FRP grids for rapid bridge deck construction: case study, Journal of Composites for Construction, Vol. 10, No. 3.
57. Barbero, E. J. (1999), Introduction to Composite Materials Design, Taylor & Francis, Philadelphia.
58. Barbero, E., and Tomblin, J. (1993), Euler buckling of thin-walled composite columns, Thin-Walled Structures, Vol. 17, pp. 237-258.
59. Barbero, E. (1994) A pheomenological design equation for FRP columns with interaction between local and global buckling, Thin-Walled Structures, Vol. 18, pp. 117-131.
60. Barbero, E. J., Fu, S.-H., and Raftoyiannis, I. (1991), Ultimate bending strength of composite beams, Journal of Materials in Civil Engineering, Vol. 3, pp. 292-306.
61. Barbero, E. J., Dede, E. K., and Jones, S. (2000), Experimental verification of buckling-mode interaction in intermediate-length composite columns, International Journal of Solids and Structures, Vol. 37, pp. 3919-3934.
62. Barbero, E. J. and DeVivo, L. (1999), Beam-column design equations for wide-flange pultruded structural shapes, Journal of Composites for Construction, Vol. 3, No. 4, pp. 185-191.
63. Barbero, E. J., and Turk, M. (2000) Experimental investigation of beam-column behavior of pultruded structural shapes, Journal of Reinforced Plastics and Composites, Vol. 19, pp. 249-265.
64. Bass, A. J., and Mottram, J. T. (1994), Behaviour of connections in frames of fibrereinforced-polymer section, Structural Engineer, Vol. 72, pp. 280-285.
65. Bedford (2005), Bedford Reinforced Plastics Design Guide, Bedford Plastics, Bedford, PA; www.bedfordplastics.com.
66. Benmokrane, B., Chaallal, O., and Masmoudi, R. (1996a), Flexural response of concrete beams reinforced with FRP reinforcing bars, ACI Structural Journal, Vol. 93, No. 1, pp. 46-55.
67. Benmokrane, B., Tighiouart, B., and Chaallal, O. (1996b), Bond strength and load distribution of composite GFRP reinforcing bars in concrete, ACI Materials Journal, Vol. 93, No. 3, pp. 246-253.
68. Benmokrane, B., El-Salakawy, E., Desgagne, G., and Lackey, T. (2004), FRP bars for bridges, Concrete International, Vol. 26, August, pp. 84-90.
69. Berg, A. C., Bank, L. C., Oliva, M. G., and Russell, J. S. (2006), Construction and cost analysis of an FRP reinforced concrete bridge deck, Construction and Building Materials, Vol. 20, No. 8, pp. 515-526.
70. Bisby, L. A., Kodur, V. K. R., and Green, M. F. (2005), Fire endurance of fiberreinforced polymer-confined concrete columns, ACI Structural Journal, Vol. 102, No. 6, pp. 883-891.
71. Bizindavyi, L., and Neale, K. W. (1999), Transfer lengths and bond strengths for composites bonded to concrete, Journal of Composites for Construction, Vol. 3, No. 4, pp. 153-160.
72. Blankenship, L. T., White, M. N., and Puckett, P. M. (1989), Vinyl ester resins: versatile resins for composites, Proceedings of the 34th International SAMPE Symposium, Vol. 34, pp. 234-245.
73. Bleich, F. (1952), Buckling Strength of Metal Structures, McGraw-Hill, New York, NY.
74. Bradberry, T. E., and Wallace, S. (2003), FRP reinforced concrete in Texas transportation past, present, future, in SP215: Field Applications of FRP Reinforcement: Case Studies (ed. S. Rizkalla and A. Nanni), American Concrete Institute, Farmington Hills, MI, pp. 37-54.
75. Braestrup, M. W. (1999), Footbridge constructed from glass-fiber-reinforced profiles, Denmark, Structural Engineering International, Vol. 9, No. 4, pp. 256-258.
76. BRI (1995), Guidelines for Structural Design of FRP Reinforced Concrete Building Structures, Building Research Institute, Tsukuba, Japan. See also Design guidelines of FRP reinforced concrete building structures, Journal of Composites for Construction, Vol. 1, No. 3, pp. 90-115, 1997.
77. Burgoyne, C., and Head, P. R. (1993), Aberfeldy bridge: an advanced textile reinforced footbridge, presented at the TechTextil Symposium, Frankfurt, Germany, June.
78. Buyukozturk, O., and Hearing, B. (1998), Failure behavior of precracked concrete beams retrofitted with FRP, Journal of Composites for Construction, Vol. 2, No. 3, pp. 138-144.
79. Buyukozturk, O., Gunes, O., and Karaca, E. (2004), Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites, Construction and Building Materials, Vol. 18, No. 1, pp. 9-19.
80. Cadei, J., and Stratford, T. (2002), The design, construction and in-service performance of the all-composite Aberfeldy footbridge, in Advanced Polymer Composites for Structural Applications in Construction (ed. R. A. Shenoi, S. S. J. Moy, and L. C. Hollaway), pp. 445-455. Thomas Telford, London.
81. CEN (2002a), Reinforced Plastics Composites: Specifications for Pultruded Profiles, Part 1: Designation; Part 2: Method of Test and General Requirements; Part 3: Specific Requirements, EN 13706, Comité Européen de Normalisation, Brussels, Belgium.
82. CEN (2002b), Eurocode 1: Actions on Structures, Comité Européen de Normalisation, Brussels, Belgium.
83. Chaallal, O., and Benmokrane, B. (1993), Pullout and bond of glass-fiber rods embedded in concrete and cement grout, Materials and Structures, Vol. 26, pp. 167-175.
84. Chai, Y. H., Priestley, M. J. N., and Seible, F. (1991), Seismic retrofit of circular bridge columns for enhanced flexural performance, ACI Structural Journal, Vol. 88, No. 5, pp. 572-584.
85. Chajes, M. J., Januszka, T. F., Mertz, D. R., Thomson, T. A., and Finch, W. W. (1995), Shear strengthening of reinforced concrete beams using externally applied concrete fabrics, ACI Structural Journal, Vol. 92, No. 3, pp. 295-303.
86. Chambers, R. E. (1997), ASCE design standard for pultruded fiber-reinforced plastic (FRP) Structures, Journal of Composites for Construction, Vol. 1, pp. 26-38.
87. Chen, J. F., and Teng, J. G. (2003a), Shear capacity of fiber-reinforced polymerstrengthened reinforced concrete beams: fiber reinforced polymer rupture, Journal of Structural Engineering, Vol. 129, No. 5, pp. 615-625.
88. Chen, J. F. (2003b), Shear capacity of FRP strengthened RC beams: FRP debonding, Construction and Building Materials, Vol. 17, pp. 27-41.
89. Cofie, E., and Bank, L. C. (1995), Analysis of thin-walled anisotropic frames by the direct stiffness method, International Journal of Solids and Structures, Vol. 32, No. 2, pp. 235-249.
90. Connolly, M., King, J., Shidaker, T., and Duncan, A. (2005), Pultruding polyurethane composite profiles: practical guidelines for injection box design, component metering equipment and processing, presented at the Composites 2005 Convention and Trade Show, September 28-30, American Composites Manufacturers Association, Columbus, OH, (CD-ROM).
91. Cooper, C., and Turvey, G. J. (1995), Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material, Composite Structures, Vol. 32, pp. 217-226.
92. Cosenza, E., Manfredi, G., and Realfonzo, R. (1997), Behavior and modeling of bond of FRP rebars to concrete, Journal of Composites for Construction, Vol. 1, No. 2, pp. 40-51.
93. Cowper, G. R. (1966), The shear coefficient in Timoshenko's beam theory, Journal of Applied Mechanics, Vol. 33, pp. 121-127.
94. Creative Pultrusions (2004), The Pultex Pultrusion Global Design Manual, 4th ed. Creative Pultrusions, Alum Bank, PA; www.creativepultrusions.com.
95. CSA (2002), Design and Construction of Building Components with Fibre-Reinforced Polymers, CSA-S806-02, Canadian Standards Association, Toronto, Ontario, Canada.
96. CTI (2003), Fiberglass Pultruded Structural Products for Use in Cooling Towers, STD-137, Cooling Technology Institute, Houston, TX.
97. Czaderski, C., and Motavalli, M. (2004), Fatigue behavior of CFRP L-shaped plates for shear strengthening of RC T-beams, Composites: Part B, Vol. 35, pp. 279-290.
98. Daniali, S. (1990), Bond strength of fiber reinforced plastic bars in concrete, Proceedings of the First Materials Engineering Congress (ed. B. Suprenant), Denver, CO, August 13-15, ASCE, Reston, VA, pp. 501-510.
99. Daniel, I. M., and Ishai, O. (1994), Engineering Mechanics of Composite Materials, Oxford University Press, New York.
100. Davalos, J. F., and Qiao, P. (1997), Analytical and experimental study of lateral and distortional buckling of FRP wide-flange beams, Journal of Composites for Construction, Vol. 1, pp. 150-15
101. Dietz, D. H., Harik, I. E., and Gesund, H. (2003), Physical properties of glass fiber reinforced polymer rebars in compression, Journal of Composites for Construction, Vol. 7, No. 4, pp. 363-366.
102. Dietz, D. H., Harik, I. E., Gesund, H., and Zatar, W. A. (2004), Barrier wall impact simulation of reinforced concrete decks with steel and glass fiber reinforced polymer bars, Journal of Composites for Construction, Vol. 8, No. 4, pp. 369-373.
103. Eberline, D. K., Klaiber, F. W., and Dunker, K. (1988), Bridge Strengthening with Epoxy-Bonded Steel Plates, Transportation Research Record 1180, pp. 7-11.
104. Ellingwood, B. R. (2003), Toward load and resistance factor design for fiber-reinforced polymer composite structures, Journal of Structural Engineering, Vol. 129, pp. 449-458.
105. El-Mihilmy, M. T., and Tedesco, J. W. (2000), Deflection of reinforced concrete beams strengthened with fiber-reinforced polymer (FRP) plates, ACI Structural Journal, Vol. 97, No. 5, pp. 679-688.
106. El-Salakawy, E., Benmokrane, B., Masmoudi, R., Briere, F., and Breaumier, E. (2003), Concrete bridge barriers reinforced with fiber-reinforced polymer composite bars, ACI Structural Journal, Vol. 100, No. 6, pp. 815-824.
107. El-Sayed, A., El-Salakawy, E., and Benmokrane, B. (2005), Shear strength of one-way concrete slabs reinforced with fiber-reinforced polymer composite bars, Journal of Composites for Construction, Vol. 9, No. 2, pp. 147-157.
108. Erki, M. A. (1995), Bolted glass-fibre-reinforced plastic joints, Canadian Journal of Civil Engineering, Vol. 22, pp. 736-744.
109. Eurocomp (1996), Structural design of polymer composites, Eurocomp Design Code and Handbook (ed. J. Clarke), E&FN Spon, London.
110. Fardis, M. N., and Khalili, H. (1981), Concrete encased in fiber-glass reinforced plastic, ACI Journal, Vol. 78, No. 6, pp. 440-446.
111. Faza, S. S., and GangaRao, H. V. S. (1990), Bending and Bond Behavior of Concrete Beams Reinforced with Plastic Rebars, Transportation Research Record 1290, pp. 185-193.
112. Faza, S. S. (1993), Theoretical and experimental correlation of behavior of concrete beams reinforced with fiber reinforced plastic rebars, in Fiber-Reinforced-Plastic Reinforcement for Concrete Structures, SP-138, American Concrete Institute, Farmington Hills, MI, pp. 599-614.
113. FIB (2001), Externally Bonded FRP Reinforcement for RC Structures, International Federation for Structural Concrete, Lausanne, Switzerland.
114. Fiberline (2003), Fiberline Design Manual, Fiberline, Kolding, Denmark; www. fiberline.com.
115. Foccaci, F., Nanni, A., and Bakis, C. E. (2000), Local bond slip relationship for FRP reinforcement in concrete, Journal of Composites for Construction, Vol. 4, pp. 24-31.
116. Frosch, R. J. (1999), Another look at cracking and crack control in reinforced concrete, ACI Structural Journal, Vol. 96, No. 3, pp. 437-442.
117. Fujisaki, T., Sekijima, K., Matsuzaki, Y., and Okumura, H. (1987), New materials for reinforced concrete in place of reinforced steel bar, presented at the IABSE Symposium, Paris-Versailles, September, pp. 413-418.
118. Fukuyama, H. (1999), FRP composites in Japan, Concrete International, October, pp. 29-32.
119. Galambos, T. V. (ed.) (1998), Guide to the Stability Design Criteria for Metal Structures, 5th ed., Wiley, New York, NY.
120. Gentry, T. R., and Husain, M. (1999), Thermal compatibility of concrete and composite reinforcements, Journal of Composites for Construction, Vol. 3, No. 2, pp. 82-86.
121. Gere, J. M., and Timoshenko, S. P. (1997), Mechanics of Materials, 4th ed., PWS, Boston.
122. Gilstrap, J. M., Burke, C. R., Dowden, D. M., and Dolan, C. W. (1997), Development of FRP reinforcement guidelines for prestressed concrete structures, Journal of Composites for Construction, Vol. 1, pp. 131-139.
123. Giroux, C., and Shao, Y. (2003), Flexural and shear rigidity of composite sheet piles, Journal of Composites for Construction, Vol. 7, No. 4, pp. 348-355.
124. Gjelsvik, A. (1981), The Theory of Thin-Walled Bars, John Wiley & Sons, New York, NY.
125. Goldsworthy, B. (1954), The continuous extrusion of RP, Proceedings of the 9th SPI RPD Conference, Chicago, February 3-5, Section 13.
126. Goldsworthy, W. B., and Hiel, C. (1998), Composite structures are a snap, SAMPE Journal, Vol. 34, No. 1, pp. 24-30.
127. Goldsworthy, W. B., and Landgraf, F. (1959), Apparatus for producing elongated articles from fiber-reinforced plastic material, U.S. patent 2,871,911, February 3.
128. Green, A., Bisarnsin, T., and Love, E. A. (1994), Pultruded reinforced plastics for civil engineering structural applications, Journal of Reinforced Plastics and Composites, Vol. 13, pp. 942-951.
129. Hancock, G. J. (1978), Local, distortional and lateral buckling of I-beams, Journal of the Structural Division, Proceedings of the ASCE, Vol. 104, No. ST11, pp. 1787-1798.
130. Hart-Smith, L. J. (1978), Mechanically fastened joints for advanced composites: phenomenological considerations and simple analyses, Proceedings of the 4th Conference on Fiberous Composites in Structural Design, Plenum Press, New York, pp. 543-574.
131. Hassan, N. H., Mohamedien, M. A., and Rizkalla, S. H. (1997a), Multibolted joints for GFRP structural members, Journal of Composites for Construction, Vol. 1, pp. 3-9.
132. Hassan, N. H. (1997b), Rational model for multibolted connections for GFRP members, Journal of Composites for Construction, Vol. 1, pp. 71-78.
133. Head, P., and Templeman, R. B. (1986), The application of limit states design principles to fibre reinforced plastics, Proceedings of the British Plastics Federation Congress 86, Nottingham, England, September 17-19, pp. 69-77.
134. Hollaway, L. (1993), Polymer Composites for Civil and Structural Engineering, Chapman & Hall, New York.
135. Hollaway, L. (2003), The evolution of and the way forward for advanced polymer composites in the civil infrastructure, Construction and Building Materials, Vol. 17, pp. 365-378.
136. Hollaway, L. C., and Garden, H. N. (1998), An experimental study of the influence of plate end anchorage of carbon fibre composite plates used to strengthen reinforced concrete beams, Composite Structures, Vol. 42, pp. 175-188.
137. Hollaway, L. C., and Head, P. R. (2001), Advanced Polymer Composites and Polymers in the Civil Infrastructure, Elsevier, London.
138. IBC (2003), International Building Code, International Code Council, Falls Church, VA.
139. ICC (2003), Performance Code for Buildings and Facilities, International Code Council, Falls Church, VA.
140. Inokuma, A. (2002), Basic study of performance-based design in civil engineering, Journal of Professional Issues in Engineering Education and Practice, Vol. 128, No. 1, pp. 30-35.
141. ISO (2006), ISO Catalogue 2006, Geneva; www.iso.org.
142. Iyer, L., and Sen, R. (1991), Advanced Composites for Civil Engineering Structures, ASCE, Reston, VA.
143. Johansen, G. E., Wilson, R. J., Roll, F., Levin, B., Chung, D., and Poplawski, E. (1999), Testing and evaluation of FRP truss connections, in Materials and Construction: Exploring the Connection, (ed. L. C. Bank) ASCE, Reston, VA, pp. 68-75.
144. JSCE (1997), Recommendation for Design and Construction of Concrete Structures Using Continuous Fiber Reinforcing Materials, Concrete Engineering Series 23, Japan Society of Civil Engineers, Tokyo.
145. JSCE (2001), Recommendation for Upgrading of Concrete Structures with Use of Continuous Fiber Sheets, Concrete Engineering Series 41, Japan Society of Civil Engineers, Tokyo.
146. Karbhari, V. M. (1998), Use of Composite Materials in Civil Infrastructure in Japan, International Technology Research Institute, World Technology (WTEC) Division, Baltimore, MD.
147. Katsumata, H., Kobatake, Y., and Takeda, T. (1988), A study on strengthening with carbon fiber for earthquake-resistant capacity of existing reinforced concrete columns, Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo-Kyoto, August 2-9, Vol. VII, pp. 517-522.
148. Katz, A. (2000), Bond to concrete of FRP rebars after cyclic loading, Journal of Composites for Construction, Vol. 4, No. 3, pp. 137-144.
149. Katz, A., Berman, N., and Bank, L. C. (1999), Effect of high temperature on the bond strength of FRP rebars, Journal of Composites for Construction, Vol. 3, pp. 73-81.
150. Keller, T. (1999), Towards structural forms for composite fiber materials, Structural Engineering International, Vol. 9, No. 4, pp. 297-300.
151. Keller, T. (1999), Towards structural forms for composite fiber materials, Structural Engineering International, Vol. 9, No. 4, pp. 297-300.
152. Keller, T., Kunzle, O., and Wyss, U. (1999), Finding the right bond, Civil Engineering, Vol. 69, No. 3, p. 4.
153. Khalifa, A., Gold, W. J., Nanni, A., and Aziz, A. (1998), Contribution of externally bonded FRP to shear capacity of RC flexural members, Journal of Composites for Construction, Vol. 2, No. 3, pp. 195-202.
154. Kim, D.-H. (1995), Composite Structures for Civil and Architectural Engineering, E&FN Spon, London.
155. Kollár, L. P. (2002), Buckling of unidirectionally loaded composite plates with one free and one rotationally restrained unloaded edge, Journal of Structural Engineering, Vol. 128, No. 9, pp. 1202-1211.
156. Kollár, L. P. (2003), Local buckling of fiber reinforced plastic composite structural members with open and closed cross sections, Journal of Structural Engineering, Vol. 129, No. 11, pp. 1503-1513.
157. Kollár, L. P., and Springer, G. S. (2003), Mechanics of Composite Structures, Cambridge University Press, Cambridge.
158. Lackey, E., and Vaughan, J. (2002), Resin fillers and additives, Composites Fabrication, March, pp. 12-17, 36.
159. Lackey, E. Vaughan, J. G., Washabauch, F., Usifer, D., and Ubrich, P. (1999), Effects of fillers on pultrusion processing and pultruded properties, presented at the International Composites Expo '99, Cincinnati, OH, May 10-12, Session 21-E, pp. 1-10, Composites Institute, New York.
160. Lamanna, A. J., Bank, L. C., and Scott, D. (2001), Flexural strengthening of RC beams using fasteners and FRP strips, ACI Structural Journal, Vol. 98, No. 3, pp. 368-376.
161. Lamanna, A. J. (2004), Flexural strengthening of RC beams by mechanically attaching FRP strips, Journal of Composites for Construction, Vol. 8, No. 3, pp. 203-210.
162. Lane, A., and Mottram, J. T. (2002), Influence of modal coupling on the buckling of concentrically loaded pultruded fibre-reinforced plastic columns, Journal of Materials: Design and Applications, Proceedings of the Institute of Mechanical Engineers, Part L, Vol. 216, pp. 133-144.
163. Lees, J. M., Winistorfer, A. U., and Meier, U. (2002), External prestressed carbon fiber-reinforced polymer straps for shear enhancement of concrete, Journal of Composites for Construction, Vol. 6, No. 4, pp. 249-256.
164. Lopez-Anido, R., Falker, E., Mittlestadt, B., and Troutman, D. (1999), Shear tests on pultruded beam-to-column connections with clip angles, in Materials and Construction: Exploring the Connection, ASCE, Reston, VA, pp. 92-99.
165. Maeda, T., Asano, Y., Sato, Y., Ueda, T., and Kakuta, Y. (1997), A study on bond mechanism of carbon fiber sheet, Non-Metallic (FRP) Reinforcement for Concrete Structures, Proceedings of the 3rd Symposium, Sapporo, Japan, Vol. 1, pp. 279-286.
166. Mander, J. B., Priestley, M. J. N., and Park, R. (1988), Theoretical stress-strain model for confined concrete, Journal of Structural Engineering, Vol. 114, No. 8, pp. 1804-1826.
167. MBrace (1998), MBrace Composite Strengthening System: Engineering Design Guidelines, Master Builders, OH; www.mbrace.com.
168. McCormick, F. C. (1988), Advancing structural plastics into the future, Journal of Professional Issues in Engineering, Vol. 114, No. 3, pp. 335-343.
169. Meier, U. (1986), Future use of advanced composites in bridge construction engineering, presented at the 2nd International Conference on Fibre Reinforced Composites, Liverpool, Lancashire, England, April 8-10, Institution of Mechanical Engineers, London.
170. Meier, U. (1995), Strengthening of concrete structures using carbon fibre/epoxy composites, Construction and Building Materials, Vol. 9, pp. 341-351.
171. Meier, U., and Kaiser, H. (1991), Strengthening structures with CFRP laminates, in Advanced Composites in Civil Engineering Structures (ed. S. Iyer and R. Sen), ASCE, Reston, VA, pp. 224-232.
172. Meyer, L. S. (1970), Pultrusion, Proceedings of the 25th Annual Technical Conference, Society for the Plastics Industry, New York, Section 6-A, pp. 1-8.
173. Meyer, R. W. (1985), Handbook of Pultrusion Technology, Chapman & Hall, London.
174. Merkes, D., and Bank, L. C. (1999), Longitudinal lap splices for pultruded FRP tubes, in Materials and Construction: Exploring the connection (ed. L. C. Bank), ASCE, Reston, VA, pp. 60-67.
175. Michaluk, C. R., Rizkalla, S., Tadros, G., and Benmokrane, B. (1998), Flexural behavior of one-way concrete slabs reinforced by fiber reinforced plastic reinforcement, ACI Structural Journal, Vol. 95, No. 3, pp. 353-364.
176. Mirmiran, A., and Shahawy, M. (1997), Behavior of concrete columns confined by fiber composites, Journal of Structural Engineering, Vol. 123, No. 5, pp. 583-590.
177. Mosallam, A. S., and Bank, L. C. (1991), Creep and recovery of a pultruded FRP frame, in Advanced Composite Materials for Civil Engineering Structures, ASCE, Reston, VA, pp. 24-35.
178. Mosallam, A. S., and Bank, L. C (1992), Short-term behavior of pultruded fiber-reinforced plastic frame, Journal of Structural Engineering, Vol. 118, pp. 1937-1954.
179. Mottram, J. T. (1991), Evaluation of design analysis for pultruded fibre-reinforced polymeric box beams, Structural Engineer, Vol. 69, pp. 211-220.
180. Mottram, J. T (1992), Lateral torsional buckling of a pultruded I beam, Composites, Vol. 23, pp. 81-92.
181. Mottram, J. T (1993), Short- and long-term structural properties of pultruded beam assemblies fabricated using adhesive bonding, Composite Structures, Vol. 25, pp. 387-395.
182. Mottram, J. T (2001), Analysis and design of connections for pultruded FRP structures, in Composites in Construction: A Reality, ASCE, Reston, VA, pp. 250-257.
183. Mottram, J. T (2004), Determination of critical load for flange buckling in concentrically loaded pultruded columns, Composites, Part B: Engineering, Vol. 35, No. 1, pp. 35-47.
184. Mottram, J. T., and Turvey, G. J. (eds.) (1998), State-of-the-Art Review on Design, Testing, Analysis and Applications of Polymeric Composite Connections, EUR 18172 EN, European Community, Brussels, Belgium.
185. Mottram, J. T., and Turvey, G. J (2003), Physical test data for the appraisal of the design procedures for bolted connections in pultruded FRP structural shapes and systems, Progress in Structural Engineering and Materials, Vol. 5, pp. 195-222.
186. Mottram, J. T., and Zheng, Y. (1996), State-of-the-art review on the design of beamto-column connections for pultruded structures, Composite Structures, Vol. 35, pp. 387-401.
187. Mottram, J. T., and Zheng, Y (1999a), Further tests on beam-to-column connections for pultruded frames: web-cleated, Journal of Composites for Construction, Vol. 3, pp. 3-11.
188. Mottram, J. T., and Zheng, Y (1999b), Further tests on beam-to-column connections for pultruded frames: flange-cleated, Journal of Composites for Construction, Vol. 3, pp. 108-116.
189. Mottram, J. T., Brown, N. D., and Anderson, D. (2003a), Physical testing for concentrically loaded columns of pultruded glass fibre reinforced plastic profile, Proceedings of the Institution of Civil Engineers, Structures, and Buildings, 156, pp. 205-219.
190. Mottram, J. T., Brown, N. D., and Anderson, D (2003b), Buckling characteristics of pultruded glass fibre reinforced plastic columns under moment gradient, Thin-walled structures, Vol. 41, pp. 619-638.
191. Nagaraj, V., and GangaoRao, H. V. S. (1997), Static behavior of pultruded GFRP beams, Journal of Composites for Construction, Vol. 1, pp. 120-129.
192. Nanni, A. (1993a), Flexural behavior and design of reinforced concrete using FRP rods, Journal of Structural Engineering, Vol. 119, No. 11, pp. 3344-3359.
193. Nanni, A (ed.) (1993b), Fiber-Reinforced Plastic (FRP) for Concrete Structures: Properties and Applications, Elsevier Science, New York.
194. Nanni, A (1995), Concrete repair with externally bonded FRP reinforcement: examples from Japan, Concrete International, June, pp. 22-26.
195. Nanni, A., and Bradford, N. M. (1995), FRP jacketed concrete under uniaxial compression, Construction and Building Materials, Vol. 9, No. 2, pp. 115-124.
196. Nanni, A., and Norris, M. S. (1995), FRP jacketed concrete under flexure and combined flexure-compression, Construction and Building Materials, Vol. 9, No. 5, pp. 273-281.
197. Nanni, A., Bakis, C. E., and Boothby, T. E. (1995), Test methods for FRP-concrete systems subjected to mechanical loads: state of the art review, Journal of Reinforced Plastics and Composites, Vol. 14, No. 6, pp. 524-558.
198. Nanni, A., and Tumialan, G. (2003), Fiber reinforced composites for the strengthening of masonry structures, Structural Engineering International, Vol. 13, No. 4, November, pp. 271-278.
199. Nawy, E. G. (2003), Reinforced Concrete: A Fundamental Approach, 5th ed., Prentice Hall, Upper Saddle River, NJ.
200. Nawy, E. G., and Neuwerth, G. E. (1977), Fiberglass reinforced concrete slabs and beams, Journal of Structural Engineering, Vol. 103, No. ST2, pp. 421-440.
201. Nawy, E. G., Neuwerth, G. E., and Phillips, C. J. (1971), Behavior of fiberglass reinforced concrete beams, Journal of Structural Engineering, Vol. 97, No. ST9, pp. 2203-2215.
202. NCHRP (2004), Bonded Repair and Retrofit of Concrete Structures Using FRP Composites, National Cooperative Highway Research Program, Report 514, Transportation Research Board, Washington, DC.
203. NFPA (2003), Building Construction and Safety Code, NFPA 5000, National Fire Protection Association, Quincy, MA.
204. Nilson, A. H., Darwin, D., and Dolan, C. W. (2004), Design of Concrete Structures, 13th ed., McGraw Hill, New York.
205. Nowak, A. S., and Collins (2000), Reliability of Structures, McGraw-Hill, New York.
206. Ospina, C. E. (2005), Alternative model for concentric punching capacity evaluation of reinforced concrete two-way slabs, Concrete International, September, pp. 55-57.
207. Ozel, M., Bank, L. C., Arora, D., Gonenc, O., Gremel, D., Nelson, B., and McMonigal, D. (2003), Comparison between FRP rebar, FRP grid and steel rebar reinforced concrete beams, Proceedings of the 6th International Symposium on FRP Reinforcement for Concrete Structures: FRPRCS6 (ed. K. H. Tan), Singapore, July 8-10, World Scientific, Singapore, pp. 1067-1076.
208. Pantelides, C. P., Nadauld, J., and Cercone, L. (2003), Repair of cracked aluminum overhead sign structures with glass fiber reinforced polymer composites, Journal of Composites for Construction, Vol. 7, No. 2, pp. 118-126.
209. Park, R. J. T., Priestley, M. J. N., and Walpole, W. R. (1983), The seismic performance of steel encased reinforced concrete bridge piles, Bulletin of the New Zealand National Society for Earthquake Engineering, Vol. 16, No. 2, pp. 123-140.
210. Paterson, J., and Mitchell, D. (2003), Seismic retrofit of shear walls with headed barsand carbon fiber wrap, Journal of Structural Engineering, Vol. 129, No. 5, pp. 606-614.
211. Paulay, T., and Priestley, M. J. N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, Wiley, New York.
212. Pecce, M., and Cosenza, E. (2000), Local buckling curves for the design of FRP profiles, Thin-Walled Structures, Vol. 37, pp. 207-222.
213. Pleimann, L. G. (1991), Strength, modulus and bond of deformed FRP rods, in Advanced Composites for Civil Engineering Structures (ed. L. Iyer, and R. Sen), ASCE, Reston, VA, pp. 99-110.
214. Prabhakaran, R., Razzaq, Z., and Devera, S. (1996), Load and resistance factor design (LRFD) approach to bolted joints in pultruded structures, Composites: Part B, Vol. 27B, pp. 351-360.
215. Priestley, M. J. N., and Park, R. (1987), Strength and ductility of concrete bridge columns under seismic loading, ACI Structural Journal, Vol. 84, No. 1, pp. 61-76.
216. Priestley, M. J. N., and Seible, F. (1995), Design of seismic retrofit measures for concrete and masonry structures, Construction and Building Materials, Vol. 9, No. 6, pp. 365-377.
217. Priestley, M. J. N., Seible, F., and Fyfe, E. R. (1992), Column seismic retrofit using fiberglass /epoxy jackets, in Advanced Composite Materials in Bridges and Structures (ACMBS) (ed. K. W. Neale, and P. Labossiere), Canadian Society of Civil Engineering, Montreal, Quebec, Canada, pp. 287-298.
218. Priestley, M. J. N., Seible, F., and Calvi, G. M. (1996), Seismic Design and Retrofit of Bridges, Wiley, New York.
219. Qiao, P., Davalos, J. F., and Wang, J. (2001), Local buckling of composite FRP shapes by discrete plate analysis, Journal of Structural Engineering, Vol. 127, No. 3, pp. 245-255.
220. Raasch, J. E. (1998), All-composite construction system provides flexible low-cost shelter, Composite Technology, March-April, pp. 56-58.
221. Razzaq, Z., Prabhakaran, R., and Sirjani, M. M. (1996), Load and resistance factor design (LRFD) approach for reinforced-plastic channel beam buckling, Composites: Part B, Vol. 27B, pp. 361-369.
222. Replark (1999), Replark System: Technical Manual, Mitsubishi Chemical Corporation, Sumitomo Corporation of America, New York; www.sumitomocorp.com.
223. Rizzo, A., Galati, N., Nanni, A., and Dharani, L. R. (2005), Material characterization of FRP pre-cured laminates used in the mechanically fastened FRP strengthening of RC structures, Proceedings of the 7th International Symposium on FRP Reinforcement for Concrete Structures FRPRCS7, ACI, SP-230, Farmington Hills, MI, pp. 135-152.
224. Roberts, T. M. (2002), Influence of shear deformation on buckling of pultruded fiber reinforced plastic profiles, Journal of Composites for Construction, Vol. 6, pp. 241-248.
225. Roberts, T. M., and Al-Ubaidi, H. (2002), Flexural and torsional properties of pultruded fiber reinforced plastic I-profiles, Journal of Composites for Construction, Vol. 6, No. 1, pp. 28-34.
226. Rosner, C. N., and Rizkalla, S. H. (1995a), Bolted connections for fiber-reinforced composite structural members: experimental program, Journal of Materials in Civil Engineering, Vol. 7, pp. 223-231.
227. Rosner, C. N., and Rizkalla, S. H (1995b), Bolted connections for fiber-reinforced composite structural members: analytical model and design recommendations, Journal of Materials in Civil Engineering, Vol. 7, pp. 232-238.
228. S&P (1998), Clever Reinforcement Company, Schere & Partners, Brunnen, Switzerland; www.sp-reinforcement.ch.
229. Saadatmanesh, H. (1994), Fiber composites for new and existing structures, ACI Structural Journal, Vol. 91, No. 3, pp. 346-354.
230. Saadatmanesh, H., and Ehsani, M. R. (1991), RC beams strengthened with GFRP plates, I: experimental study, Journal of Structural Engineering, Vol. 117, No. 11, pp. 3417-3433.
231. Saadatmanesh, H., Ehsani, M. R., and Li, M. W. (1994), Strength and ductility of concrete columns externally reinforced with fiber composite straps, ACI Structural Journal, Vol. 91, No. 4, pp. 434-447.
232. Saha, M., Prabhakaran, R., and Waters, W. A. (2004), Compressive behavior of pultruded composite plates with holes, Composite Structures, Vol. 65, pp. 29-36.
233. Salmon, C. G., and Johnson, J. E. (1996), Steel Structures: Design and Behavior, 4th ed., HarperCollins, New York.
234. Samaan, M., Mirmiran, A., and Shahawy, M. (1998), Model of concrete confined by fiber composites, Journal of Structural Engineering, Vol. 124, No. 9, pp. 1025-1031.
235. Schwartz, M. M. (1997a), Composite Materials, Vol. I, Properties, Nondestructuve Testing and Repair, Prentice Hall, Upper Saddle River, NJ.
236. Schwartz, M. M (1997b), Composite Materials, Vol. II, Processing, Fabrication and Applications, Prentice Hall, Upper Saddle River, NJ.
237. Schwegler, G. (1994), Masonry construction strengthened with fiber composites in seismically endangered zones, in Proceedings of the 10th European Conference on Earthquake Engineering, Vienna, Austria, pp. 2299-2303.
238. Scott, D. W., and Zureick, A. (1998), Compression creep of a pultruded E-glass/vinylester composite, Composites Science and Technology, Vol. 98, pp. 1361-1369.
239. Scott, D. W., Zureick, A., and Lai, J. S. (1995), Creep behavior of fiber reinforced polymeric composites, Journal of Reinforced Plastics and Composites, Vol. 14, pp. 590-617.
240. Seible, F., Priestley, J. N., Hegemeier, G. A., and Innamorato, D. (1997), Seismic retrofit of RC columns with continuous carbon fiber jackets, Journal of Composites for Construction, Vol. 1, No. 2, pp. 52-62.
241. Seymour, R. B. (1987), Polymers for Engineering Applications, ASM International, Materials Park, OH.
242. Shao, Y., and Shanmugam, J. (2004), Deflection creep of pultruded composite sheet piling, Journal of Composites for Construction, Vol. 8, No. 5, pp. 471-479.
243. Shield, C. K., Busel, J. P., Walkup, S. L., and Gremel, D., (eds.) (2005), 7th International Symposium on Fiber-Reinforced (FRP) Polymer Reinforcement for Concrete Structures, Kansas City, SP-230, American Concrete Institute, Farmington Hills, MI.
244. Sika (1997), Sika Carbodur: Engineering Guidelines for the Use of Sika Carbodur (CFRP) Laminates for Structural Strengthening of Concrete Structures, Sika Corporation, Lyndhurst, NJ; www.sikaconstruction.com.
245. Sika (2000), Sika Carbodur: Carbon Fiber Laminate for Structural Strengthening, Sika Corporation, Lyndhurst, NJ; www.sikausa.com.
246. Smallowitz, H. (1985), Reshaping the future of plastic buildings, Civil Engineering, ASCE, May, pp. 38-41.
247. Smith, C. (2002), A comparison of A&E glass mats for pultrusion, Composites Fabrication, July, pp. 12-19.
248. Smith, C., McEwen, S., and Tillson, J. (1998), The effect of different continuous strand mats on pultrusion property performance, Proceedings of the International Composites Expo, Nashville, TN, January 19-21, Section 19A, pp. 1-10.
249. Smith, S. J., Parsons, I. D., and Hjelmstad, K. D. (1999), Experimental comparison of connections for GFRP pultruded frames, Journal of Composites for Construction, Vol. 3, pp. 20-26.
250. Sonobe et al. (1997), Design guidelines of FRP reinforced concrete building structures, Journal of Composites for Construction, Vol. 1, pp. 90-115.
251. Sourcebook, (2006), Sourcebook Industry Directory, Ray Publishing, Wheat Ridge, CO.
252. Spadea, G., Bencardino, F., and Swamy, R. N. (1998), Structural behavior of composite RC beams with externally bonded CFRP, Journal of Composites for Construction, Vol. 2, No. 3, pp. 132-137.
253. Spoelstra, M. R., and Monti, G. (1999), FRP-confined concrete model, Journal of Composites for Construction, Vol. 3, No. 3, pp. 143-150.
254. Starr, T. (ed.), (2000), Pultrusion for Engineers, CRC Press, Boca Raton, FL.
255. Steffen, R., Scott, D., Goodspeed, C., Bowman, M., and Trunfio, J. 2003, Design issues and constructibility of a CFRP grid reinforced bridge deck, Bridge Materials 2001: High Performance Materials in Bridges (ed. A. Azizinamini, A.Yakel, and M. Abdelrahman), ASCE, Reston, VA, pp. 106-116.
256. Strongwell (2002), Strongwell Design Manual (CD ROM), Strongwell, Bristol, VA; www.strongwell.com.
257. Sugita, M. (1993), NEFMAC: grid type reinforcement, in Fiber-Reinforced-Plastic (FRP) Reinforcement for Concrete Structures: Properties and Applications (ed. A. Nanni), Elsevier, Amsterdam, pp. 355-385.
258. Szerszen, M. M., and Nowak, A. S. (2003), Calibration of design code for buildings (ACI 318), Part 2: Reliability analysis and resistance factors, ACI Structural Journal, Vol. 100, No. 3, pp. 383-391.
259. Taerwe, L. R., and Matthys, S. (1999), FRP for concrete construction: activities in Europe, Concrete International, October, pp. 33-36.
260. Taljsten, B. (1997), Strengthening of beams by plate bonding, Journal of Materials in Civil Engineering, Vol. 9, No. 4, pp. 206-212.
261. Taljsten, B (2004), FRP Strengthening of Existing Concrete Structures: Design Guideline, 3rd ed., Lulea University of Technology, Lulea, Sweden.
262. Tan, K. H. (ed.) (2003), Fibre-reinforced polymer reinforcement for concrete structures, Proceedings of the 6th International Symposium on FRP Reinforced Concrete Structures: FRPRCS6, Singapore, World Scientific, Singapore.
263. Tan, K. H., and Patoary, M. K. H. (2004), Strengthening of masonry walls against outof-plane loads using fiber-reinforced polymer reinforcement, Journal of Composites for Construction, Vol. 8, No. 1, pp. 79-87.
264. Teng, J. G., Chen, J. F., Smith, S. T., and Lam, L. (2001), FRP Strengthened RC Structures, Wiley, New York.
265. Theriault, M., Neale, K. W., and Claude, S. (2004), Fiber-reinforced polymer-confined circular concrete columns: investigation of size and slenderness effects, Journal of Composites for Construction, Vol. 8, No. 4, pp. 323-331.
266. Timoshenko, S. P. (1921), On the correction for shear of the differential equation for transverse vibration of prismatic bars, Philosophical Magazine, Vol. 41, pp. 744-746.
267. Timoshenko, S., and Gere, J. (1961), Theory of Elastic Stability, 2nd ed., McGraw-Hill, New York.
268. Timoshenko, S., and Woinowsky-Krieger, S. (1959), Theory of Plates and Shells, McGraw-Hill, New York.
269. Tingley, D. A., Gai, C., and Giltner, E. E. (1997), Testing methods to determine properties of fiber reinforced plastic panels used for reinforcing glulams, Journal of Composites for Construction, Vol. 1, No. 4, pp. 160-167.
270. Todeshini, C. E., Bianchini, A. C., and Kesler, C. E. (1964), Behavior of concrete columns with high strength reinforced steels, Journal of the American Concrete Institute, Proceedings, Vol. 61, pp. 701-715.
271. Tomblin, J. and Barbero, E. (1994), Local buckling experiments on FRP columns, Thin-walled Structures, Vol. 18, pp. 97-116.
272. Tonen (1996), Forca Towsheet Technical Manual, Rev. 5.0, Tonen Corporation, Tokyo.
273. Torres-Acosta, A. A. (2002), Galvanic corrosion of steel in contact with carbon-polymer composites, II: Experiments in concrete, Journal of Composites for Construction, Vol. 6, No. 2, pp. 116-122.
274. TR 55 (2004), Design Guidance for Strengthening Concrete Structures Using Fibre Composite Materials, The Concrete Society, Camberley, Surrey, England.
275. TR 57 (2003), Strengthening Concrete Structures with Fibre Composite Materials: Acceptance, Inspection and Monitoring, The Concrete Society, Camberley, Surrey, England.
276. Triantafillou, T. (1998), Shear strengthening of reinforced concrete beams using epoxybonded FRP composites, ACI Structural Journal, Vol. 95, pp. 107-115.
277. Triantafillou, T. C., Deskovic, N., and Deuring, M. (1992), Strengthening of concrete structures with prestressed fiber reinforced plastic sheets, ACI Structural Journal, Vol. 89, No. 3, pp. 235-244.
278. Tsai, S. W. (1988), Think Composites, 4th ed., Think Composites Publishers, Dayton, OH.
279. Tsai, S., and Hahn, T. (1980), Introduction to Composite Materials, Technomic, Lancaster, PA.
280. Tureyen, A. K., and Frosch, R. J. (2002), Shear tests of FRP-reinforced concrete beams without stirrups, ACI Structural Journal, Vol. 99, No. 4, pp. 427-434.
281. Tureyen, A. K., and Frosch, R. J (2003), Concrete shear strength: another perspective, ACI Structural Journal, Vol. 10, No. 5, pp. 609-615.
282. Turvey, G. J. (1996), Effects of load position on the lateral buckling response of pultruded GRP cantilevers: comparisons between theory and experiment, Composite Structures, Vol. 35, pp. 33-47.
283. Turvey, G. J (1998), Single-bolt tension tests on pultruded GRP plate: effects of tension direction relative to pultrusion direction, Composite Structures, Vol. 42, pp. 341-351.
284. Turvey, G. J (2000), Bolted connections in PFRP structures, Progress in Structural Engineering and Materials, Vol. 2, pp. 146-156.
285. Turvey, G. J (2001), Pultruded GRP frames: simple (conservative) approach to design, a rational alternative and research needs for improved design, in Composites for Construction: A Reality, ASCE, Reston, VA, pp. 258-266.
286. Turvey, G. J., and Cooper C. (1996), Characterization of the short-term static momentrotation response of bolted connections between pultruded GRP beam and column WF-sections, Proceedings of Advanced Composite Materials in Bridges and Structures 2, Montreal, Quebec, Canada, pp. 295-300.
287. Turvey, G. J (2004), Review of tests on bolted joints between pultruded GRP profiles, Proceedings of the Institute of Civil Engineers, Structures and Buildings, Vol. 157, No. SB3, pp. 211-233.
288. Turvey, G. J., and Wang, P. (2003), Open hole tension strength of pultruded GRP plate, Proceedings of the Institution of Civil Engineers, Structures and Buildings, Vol. 156, No. 1, pp. 93-101.
289. Turvey, G. J., and Zhang, Y. (2005), Tearing failure in web-flange junctions in pultruded GRP profiles, Composites: Part A, Vol. 36, pp. 309-317.
290. Tyfo (1998), Design Manual for the Tyfo Fibrwrap System, Fyfe Co. LLC, San Diego, CA; www.fyfeco.com.
291. Van Den Einde, L., Zhao, L., and Seible, F. (2003), Use of FRP composites in civil structural applications, Construction and Building Materials, Vol. 17, pp. 389-403.
292. Wambeke, B. W., and Shield, C. K. (2006), Development length of glass fiber reinforcing bars in concrete, ACI Structural Journal, Vol. 103, No. 1, pp. 11-17.
293. Wang, Y. (2002), Bearing behavior of joints in pultruded composites, Journal of Composite Materials, Vol. 36, pp. 2199-2216.
294. Wang, C.-K., and Salmon, C. G. (2002), Reinforced Concrete Design, 6th ed., Wiley, New York.
295. Wang, Y., and Zureick, A. (1994), Characterization of the longitudinal tensile behavior of pultruded I-shape structural members using coupon specimens, Composite Structures, Vol. 29, pp. 463-472.
296. White, J. R., and Turnbull, A. (1994), Weathering of polymers: mechanisms of degradation and stabilization, testing strategies and modeling, Journal of Materials Science, Vol. 29, No. 3, pp. 584-613.
297. Whitney, C. S. (1937), Design of reinforced concrete members under flexure or combined flexure and direct compression, Journal of the American Concrete Institute, Vol. 33, pp. 483-498.
298. Xiao, Y., and Ma, R. (1997), Seismic retrofit of RC circular columns using prefabricated composite jacketing, Journal of Structural Engineering, Vol. 123, No. 10, pp. 1357-1364.
299. Yeh, H. S., and Yang, S. C. (1997), Building a composite transmission tower, Journal of Reinforced Plastics and Composites, Vol. 16, No. 5, pp. 414-424.
300. Yoon, S. J., Scott, D. W., and Zureick, A. (1992), An experimental investigation of the behavior of concentrically loaded pultruded columns, in Advanced Composite Materials in Bridges and Structures (ACMBS) (ed. K. W. Neale and P. Labossiere), Canadian Society of Civil Engineering, Montreal, Quebec, Canada, pp. 309-317.
301. Yost, J. R., Gross, S. P., and Dinehart, D. W. (2001), Shear strength of normal strength concrete beams reinforced with deformed GFRP bars, Journal of Composites for Construction, Vol. 5, No. 4, pp. 268-275.
302. Zureick, A. (1998), FRP pultruded structural shapes, Progress in Structural Engineering and Materials, Vol. 1, No. 2, 143-149.
303. Zureick, A., and Scott, D. (1997), Short-term behavior and design of fiber-reinforced polymeric slender members under axial compression, Journal of Composites for Construction, Vol. 1, pp. 140-149.
304. Zureick, A., and Steffen, R. (2000), Behavior and design of concentrically loaded pultruded angles struts, Journal of Structural Engineering, Vol. 126, pp. 406-416.