Fiber-reinforced polymer composites for construction - State-of-the-art review

Journal of Composites for Construction

Volumn 6, Issue 2, 2002, Pages 73-87

  Bakis, C E ^a   Bank, L C ^b   Brown, V L ^c   Cosenza, E ^d   Davalos, J F ^e   Lesko, J J ^f   Machida, A ^g   Rizkalla, S H ^h   Triantafillou, T C ⁱ  

^a The Pennsylvania State University   (United States)

^b UNIVERSITY OF WISCONSIN MADISON   (United States)

^c WIDENER UNIVERSITY   (United States)

^d UNIVERSITY OF NAPLES FEDERICO II   (Italy)

^e West Virginia University   (United States)

^f State University   (United States)

^g SAITAMA UNIVERSITY   (Japan)

^h North Carolina State University   (United States)

ⁱ UNIVERSITY OF PATRAS   (Greece)

Author keywords

Bridge decks; Composite materials; Fiber reinforced materials; Polymers; State of the art reviews

Indexed keywords

AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCM); CIVIL ENGINEERS; HIGH-STIFFNESS STRUCTURAL FIBERS; STATE-OF-THE-ART REVIEWS;

BRIDGE DECKS; CIVIL ENGINEERING; CODES (STANDARDS); CONSTRUCTION; DURABILITY; GLASS FIBERS; REINFORCEMENT; STIFFNESS; STRUCTURAL DESIGN;

FIBER REINFORCED PLASTICS;

EID: 2942568179     PISSN: 10900268     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)1090-0268(2002)6:2(73)     Document Type: Review

References (101)

1. ACI Committee 440. (1996). "State-of-the-art report on fiber reinforced plastic (FRP) reinforcement for concrete structures." ACI 440 R-96, American Concrete Institute, Farmington Hills, Mich.
2. ACI Committee 440. (2001). "Guide for the design and construction of concrete reinforced with FRP bars." ACI 440.1 R-01, American Concrete Institute, Farmington Hills, Mich.
3. Alampalli, S., O'Connor, J., Yannotti, A. P., and Luu, K. T. (1999). "Fiber-reinforced plastics for bridge construction and rehabilitation in New York." Materials and Construction: Exploring the connection, Proc., 5th Materials Engineering Congress, L. C. Bank, ed., ASCE, Reston, Va., 344-350.
4. American Association of State Highway and Transportation Officials (AASHTO). (1998). Load and resistance factor design (LRFD) bridge design specifications, 2nd Ed., Washington, D.C.
5. Bakht, G. A., et al. (2000). "Canadian bridge design code provisions for fiber-reinforced structures." J. Compos. Constr., 4(1), 3-15.
6. Bakis, C. E., Nanni, A., Terosky, J. A., and Koehler, S. W. (2001). "Self-monitoring, pseudo-ductile, hybrid FRP reinforcement rods for concrete applications." Compos. Sci. Technol., 61(6), 815-823.
7. Bank, L. C. (1995). "How standards will develop markets in building construction." Proc., 50th Annual SPI Con., Composites Institute, Society for the Plastics Industry, Cincinnati, 14.1-14.4.
8. Bank, L. C., et al. (2000). "Construction of a pultruded composite structure: Case study." J. Compos. Constr., 4(3), 112-119.
9. Bank, L. C., and Ozel, M. (1999). "Shear failure of concrete beams reinforced with 3-D fiber reinforced plastic grids." Proc., 4th Int. Symposium, Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, C. W. Dolan, S. H. Rizkalla, and A. Nanni, eds., SP-188, American Concrete Institute, Farmington Hills, Mich., 145-156.
10. Bank, L. C., and Xi, Z. (1993). "Pultruded FRP grating reinforced concrete slabs." Fiber-Reinforced Plastic for Concrete Structures - Int. Symposium, A. Nanni and C. W. Dolan, eds., SP-138, American Concrete Institute, Farmington Hills, Mich., 561-583.
11. Barbero, E. J., Lopez-Anido, R., and Davalos, J. F. (1993). "On the mechanics of thin-walled laminated composite beams." J. Compos. Mater., 27(8), 806-829.
12. Benmokrane, B., et al. (2000). "Use of fibre reinforced polymer reinforcement integrated with fibre optic sensors for concrete bridge deck slab construction." Can. J. Civ. Eng., 27(5), 928-940.
13. Blaschko, M., and Zilch, K. (1999). "Rehabilitation of concrete structures with CFRP strips glued into slits." Proc., 12th Int. Conf. on Composite Materials, T. Mussard, ed., International Committee on Composite Materials.
14. Borri, A., Avorio, A., and Bottardi, M. (2000). "Theoretical analysis and a case study of historical masonry vaults strengthened by using advanced FRP." Proc., 3rd Int. Conf. on Advanced Composite Materials in Bridges and Structures, J. L. Humar and A. G. Razaqpur, eds., ACMBS-3, Canadian Society for Civil Engineering, Montréal, Québec, 577-584.
15. British Standards Institute (BSI). (1985). "Structural use of concrete. Code of practice for special circumstances." BS 8110-2, London.
16. British Standards Institute (BSI). (1990). "Steel, concrete and composite bridges. Code of practice for design of concrete bridges." BS 5400-4, London.
17. British Standards Institute (BSI). (1997). "Structural use of concrete. Code of practice for design and construction." BS 8110-1, London.
18. Canadian Standards Association International (CSA). (2000). "Canadian Highway bridge design code." CSA-S6-00, Toronto.
19. Canadian Standards Association International (CSA). (2002). "Design and construction of building components with fibre reinforced polymers." CSA-S8-06, Toronto.
20. Composite materials handbook (MIL-HDBK-17). (2001). 〈http://www.mil17.org〉 (August 2001).
21. Cosenza, E., Manfredi, G., and Realfonzo, R. (1997). "Behavior and modeling of bond of FRP rebars to concrete." J. Compos. Constr., 1(2), 40-51.
22. Crawford, J. E., Malvar, L. J., Wesevich, J. W., Valancius, J. R., and Aaron, D. (1997). "Retrofit of reinforced concrete structures to resist blast effects." ACI Struct. J., 94(4), 371-377.
23. Creative Pultrusions. (1999). Pultex design manual, 〈www.creativepultrusions.com〉 (August 2001).
24. Dagher, H. J., Schmidt, A. L., Abdel-Magid, B., and Iyer, S. (1997). "FRP post-tensioning of laminated timber bridges." Evolving Technologies for the Competitive Edge, Proc., 42nd Int. SAMPE Symposium, Vol. 2, Society for the Advancement of Material and Process Engineering, Covina, Calif., 933-938.
25. Davalos, J. F., Qiao, P., and Barbero, E. J. (1996). "Multiobjective material architecture optimization of pultruded FRP I beams." Compos. Struct., 35(3), 271-281.
26. Davalos, J. F., Qiao, P. Z., Xu, X. F., Robinson, J., and Barth, K. E. (2001). "Modeling and characterization of fiber-reinforced plastic honeycomb sandwich panels for highway bridge applications." J. Compos. Constr., 52(3-4), 441-452.
27. Davis, D., and Porter, M. L. (1999). "Glass fiber reinforced polymer dowel bars for transverse pavement joints." Proc., 4th Int. Symposium, Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, C. W. Dolan, S. H. Rizkalla, and A. Nanni, eds., SP-188, American Concrete Institute, Farmington Hills, Mich., 297-304.
28. Deitz, D. H., Harik, I. E., and Gesund, H. (1999). "One-way slabs reinforced with glass fiber reinforced polymer reinforcing bars." Proc., 4th Int. Symposium, Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, C. W. Dolan, S. H. Rizkalla, and A. Nanni, eds., SP-188, American Concrete Institute, Farmington Hills, Mich., 279-286.
29. Dolan, C. W. (1999). "FRP prestressing in the USA." Concr. Int., 21(10), 21-24.
30. Fardis, M. N., and Khalili, H. (1981). "Concrete encased in fiberglass reinforced plastic." ACI J., 78(6), 440-446.
31. Fédération Internationale du Béton (FIB). (2001). "Externally bonded FRP reinforcement for RC structures." Bulletin 14, Lausanne, Switzerland.
32. Fiberline. (1995). Fiberline design manual, 〈www.fiberline.de〉.
33. Focacci, F., Nanni, A., and Bakis, C. E. (2000). "Local bond-slip relationship for FRP reinforcement in concrete." J. Compos. Constr., 4(1), 24-31.
34. Fukuyama, H. (1999). "FRP composites in Japan." Concr. Int., 21(10), 29-32.
35. GangaRao, H. V. S., Thippeswamy, H. K., Shekar, V., and Craigo, C. (1999). "Development of glass fiber reinforced polymer composite bridge deck." SAMPE J., 35(4), 12-24.
36. GangaRao, H. V. S., and Vijay, P. V. (1997). "Design of concrete members reinforced with GFRP bars." Proc., 3rd Int. Symposium, Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Vol. 1, Japan Concrete Institute, Tokyo, 143-150.
37. Green, A., Bisarnsin, T., and Love, E. A. (1994). "Pultruded reinforced plastics for civil engineering structural applications." J. Reinf. Plast. Compos., 13(10), 942-951.
38. Harik, I., et al. (1999). "Static testing on FRP bridge deck panels." Proc., 44th Int. SAMPE Symposium and Exhibition, Vol. 2, Society for the Advancement of Material and Process Engineering, Covina, Calif., 1643-1654.
39. Hayes, M. D., Lesko, J. J., Haramis, J., Cousins, T. E., Gomez, J., and Massarelli, P. (2000a). "Laboratory and field testing of composite bridge superstructure." J. Compos. Constr., 4(3), 120-128.
40. Hayes, M. D., Ohanehi, D., Lesko, J. J., Cousins, T. E., and Witcher, D. (2000b). "Performance of tube and plate fiberglass composite bridge deck." J. Compos. Constr., 4(2), 48-55.
41. Institution of Structural Engineers (ISE). (1999). "Interim guidance on the design of reinforced concrete structures using fiber composite reinforcement." Reference No. 319, London.
42. Japan Concrete Institute (JCI). (1998). "Technical report on continuous fiber reinforced concrete." TC 952, Committee on Continuous Fiber Reinforced Concrete, Tokyo.
43. Japan Society of Civil Engineers (JSCE). (1986a). "Standard specification for design and construction of concrete structures. Part 1 (design)." SP1, Tokyo.
44. Japan Society of Civil Engineers (JSCE). (1986b). "Standard specification for design and construction of concrete structures. Part 2 (construction)." SP2, Tokyo.
45. Johansen, G. E., Wilson, R. J., Roll, F., and Gaudini, G. (1997). "Design and construction of long span FRP pedestrian bridges." Building to last, Proc., Structures Congress XV, L. Kempner and C. B. Brown, eds., ASCE, New York, 46-50.
46. Karbhari, V. M., Seible, F., Burgueno, R., Davol, A., Wernli, M., and Zhao, L. (2000). "Structural characterization of fiber-reinforced composite short and medium-span bridge systems." Appl. Compos. Mater., 7(2), 151-182.
47. Karbhari, V. M., and Shulley, S. B. (1995). "Use of composites for rehabilitation of steel structures - Determination of bond durability." J. Mater. Civ. Eng., 7(4), 239-245.
48. Katsumata, H., Kobatake, Y., and Takeda, T. (1987). "A study on the strengthening with carbon fiber for earthquake-resistant capacity of existing reinforced concrete columns." Proc., Workshop on Repair and Retrofit of Existing Structures, U.S.-Japan Panel on Wind and Seismic Effects, U.S.-Japan Cooperative Program in Natural Resources, Tsukuba, Japan, 1816-1823.
49. Keller, T. (1999). "Towards structural forms for composite fibre materials." Struct. Eng. Int. (IABSE, Zurich, Switzerland), 9(4), 297-300.
50. Lamanna, A. J., Bank, L. C., and Scott, D. W. (2001). "Flexural strengthening of reinforced concrete beams using fasteners and fiber reinforced polymer strips." ACI Struct. J., 98(3), 368-376.
51. Lees, J. M., and Burgoyne, C. J. (1999). "Design guidelines for concrete beams prestressed with partially-bonded fiber reinforced plastic tendons." Proc., 4th Int. Symposium, Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, C. W. Dolan, S. H. Rizkalla, and A. Nanni, eds., SP-188, American Concrete Institute, Farmington Hills, Mich., 807-816.
52. A look at the world's FRP composite bridges. (1998). Market Development Alliance, Society of Plastics Engineers Composites Institute, New York.
53. Lopez-Anido, R. (2001). "Life-cycle cost survey of concrete decks - A benchmark for FRP bridge deck replacement." (CD-Rom), Proc., 80th Transportation Research Board Meeting.
54. Lu, Z., Boothby, T. E., Bakis, C. E., and Nanni, A. (2000). "Transfer and development length of FRP prestressing tendons.," Precast Concrete Institute J., 45(2), 84-95.
55. Machida, A. (1997a). "Issues in developing design code for concrete structures with FRP." Proc., 3rd Int. Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, Vol. 1, Japan Concrete Institute, Tokyo, 129-140.
56. Machida, A., ed. (1997b). "Recommendation for design and construction of concrete structures using continuous fiber reinforcing materials." Concrete Engineering Series 23, Japan Society of Civil Engineers, Tokyo.
57. Machida, A., Kakuta, Y., Tsuji, Y., and Seki, H. (1995). "Initiatives in developing the specifications for design and construction of concrete structures using FRP in Japan." Proc. 2nd Int. RILEM Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, L. Taerwe, ed., E & FN Spon, London, 627-635.
58. Masmoudi, R., Thèriault, M., and Benmokrane, B. (1998). "Flexural behavior of concrete beams reinforced with deformed fiber reinforced plastic reinforcing rods." ACI Struct. J., 95(6), 665-676.
59. Matthys, S., and Taerwe, L. R. (2000). "Concrete slabs reinforced with FRP grids. I: One-way bending." J. Compos. Constr., 4(3), 145-153.
60. McGhee, K. K., Barton, F. W., and McKeel, W. T. (1991). "Optimum design of composite bridge deck panels." Advanced Composite Materials in Civil Engineering Structures, Proc., Specialty Conf., S. I. Iyer and R. Sen, eds., ASCE, New York, 360-370.
61. Meier, U. (1987). "Bridge repair with high performance composite materials." Mater. Tech. (Duebendorf, Switz.), 4, 125-128 (in German).
62. Meyer, R. W. (1985). Handbook of pultrusion technology, Chapman & Hall, London.
63. Michaluk, C. R., Rizkalla, S., Tadros, G., and Benmokrane, B. (1998). "Flexural behavior of one-way concrete slabs reinforced by fiber reinforced plastic reinforcements." ACI Struct. J., 95(3), 353-364.
64. Mirmiran, A., Naguib, W., and Shahawy, M. (2000). "Principles and analysis of concrete-filled composite tubes." J. Adv. Mater., 32(4), 16-23.
65. Mirmiran, A., Shahawy, M., Samaan, M., El Echary, H., Mastrapa, J. C., and Pico, O. (1998). "Effect of column parameters on FRP-confined concrete." J. Compos. Constr., 2(4), 175-185.
66. Mufti, A. A., Erki, M. A., and Jaeger, L. G., eds. (1991a). Advanced composite materials in bridges and structures in Japan, Canadian Society for Civil Engineering, Montréal, August.
67. Mufti, A. A., Erki, M. A., and Jaeger, L. G., eds. (1991b). Advanced composite materials with application to bridges, Canadian Society for Civil Engineering, Montréal, May.
68. Nanni, A., ed. (1993). Fiber-reinforced-plastic for concrete structures: Properties and applications, Elsevier Science, Amsterdam.
69. Nanni, A., Bakis, C. E., O'Neil, E. F., and Dixon, T. O. (1996). "Performance of FRP tendon-anchor systems for prestressed concrete structures." PCI J., 41, 34-44.
70. Pethrick, R. A., Boinard, E., Dalzel-Job, J., and MacFarlane, C. J. (2000). "Influence of resin chemistry on water uptake and environmental aging in glass fibre reinforced composites - Polyester and vinyl ester laminates." J. Mater. Sci., 35(8), 1931-1937.
71. Plevris, N., and Triantafillou, T. C. (1992). "FRP-reinforced wood as structural material." J. Mater. Civ. Eng., 4(3), 300-317.
72. Priestley, M. J. N., and Seible, F. (1995). "Design of seismic retrofit measures for concrete and masonry structures." Constr. Build. Mater., 9(6), 365-377.
73. Product selection guide: FRP composite products for bridge applications. (2000). 1st Ed., J. P. Busel and J. D. Lockwood, eds., Market Development Alliance, Harrison, N.Y.
74. Qiao, P., Davalos, J. F., and Brown, B. (2000). "A systematic approach for analysis and design of single-span FRP deck/stringer bridges. " Composites, Part B, 31(6-7), 593-610.
75. Qiao, P., Davalos, J. F., and Zipfel, M. G. (1998). "Modeling and optimal design of composite-reinforced wood railroad crosstie." Compos. Struct., 41(1), 87-96.
76. Raasch, J. E. (1998). "All-composite construction system provides flexible low-cost shelter." Compos. Technol., 4(3), 56-58.
77. Railway Technical Research Institute (RTRI). (1996a). "Design and construction guidelines for seismic retrofitting of railway viaduct columns using aramid fiber sheets." Tokyo (in Japanese).
78. Railway Technical Research Institute (RTRI). (1996b). "Design and construction guidelines for seismic retrofitting of railway viaduct columns using carbon fiber sheets." Tokyo (in Japanese).
79. Razaqpur, A. G., and Mostofinejad, D. (1999). "Experimental study of shear behavior of continuous beams reinforced with carbon fiber reinforced polymer." Proc., 4th Int. Symposium, Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, C. W. Dolan, S. H. Rizkalla, and A. Nanni, eds., SP-188, American Concrete Institute, Farmington Hills, Mich. 169-178.
80. Rostasy, F. S. (1987). "Bonding of steel and GFRP plates in the area of coupling joints. Talbrucke Kattenbusch." Research Report No. 3126/1429, Federal Institute for Materials Testing, Braunschweig, Germany (in German).
81. Schwegler, G. (1994). "Masonry construction strengthened with fiber composites in seismically endangered zones." Proc., 10th European Conf. on Earthquake Engineering, Vol. 3, G. Duma, ed., Balkema, Rotterdam, The Netherlands, 2299-2304.
82. Shehata, E., Morphy, R., and Rizkalla, S. (2000). "Fiber reinforced polymer shear reinforcement for concrete members: Behavior and design guidelines." Can. J. Civ. Eng., 27(5), 859-872.
83. Smallowitz, H. (1985). "Reshaping the future of plastic buildings." Civ. Eng. (N.Y.), 55(5), 38-41.
84. Somboonsong, W., Ko, F. K., and Harris, H. G. (1998). "Ductile hybrid fiber reinforced plastic reinforcing bar for concrete structures: Design methodology." ACI Mater. J., 95(6), 655-666.
85. Sonobe, Y., et al. (1997). "Design guidelines of FRP reinforced concrete building structures." J. Compos. Constr., 1(3), 90-115.
86. Sonobe, Y., Mochizuki, S., Matsuzaki, Y., Shimizu, A., Masuda, Y., and Fukuyama, H. (1995). "Guidelines for structural design of FRP reinforced concrete buildings in Japan." Proc., 2nd Int. RILEM Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, L. Taerwe, ed., E&FN Spon, London, 636-645.
87. Strongwell. (1999). EXTREN fiberglass structural shapes - Design manual, Bristol, Va., 〈www.strongwell.com〉 (August).
88. Taerwe, L. R., and Matthys, S. (1999). "FRP for concrete construction." Concrete Int., 21(10), 33-36.
89. Taly, N. (1998). Design of modern highway bridges, McGraw-Hill, New York.
90. Temeles, A. B., Cousins, T. E., and Lesko, J. J. (2000). "Composite plate and tube bridge deck design: Evaluation in the Troutville, Virginia weigh station test bed." Proc., 3rd Int. Conf. on Advanced Composite Materials in Bridges and Structures, ACMBS-3, J. L. Humar and A. G. Razaqpur, eds., Canadian Society for Civil Engineering, Montréal, 801-808.
91. Tinazzi, D., Arduini, M., Modena, C., and Nanni, A. (2000). "FRP-structural repointing of masonry assemblages." Proc., 3rd Int. Conf. on Advanced Composite Materials in Bridges and Structures, ACMBS-3, J. L. Humar and A. G. Razaqpur, eds., Canadian Society for Civil Engineering, Montréal, 585-592.
92. Triantafillou, T. C. (1998). "Strengthening of masonry structures using epoxy-bonded FRP laminates." J. Compos. Constr., 2(2), 96-104.
93. Triantafillou, T. C., and Antonopoulos, C. P. (2000). "Design of concrete flexural members strengthened in shear with FRP." J. Compos. Constr., 4(4), 198-205.
94. Triantafillou, T. C., Deskovic, N., and Deuring, M. (1992). "Strengthening of concrete structures with prestressed FRP sheets." ACI Struct. J., 89(3), 235-244.
95. Triantafillou, T. C., and Fardis, M. N. (1993). "Advanced composites for strengthening historic structures." Proc., Symposium on Structural Preservation of the Architectural Heritage, International Association for Bridge and Structural Engineering, Zurich, Switzerland, 541-548.
96. Tsuji, Y., Umehara, H., Hattori, A., Uomoto, T., and Machida, A. (1997). "Japanese recommendation for design and construction of continuous fiber reinforced concrete in public works- Part 2: Construction." Proc., 3rd Int. Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, Vol. 1, Japan Concrete Institute, Tokyo, 183-190.
97. Uomoto, T., Hattori, A., Maruyama, K., and Machida, A. (1997). "Notes on the proposed quality standards for continuous fiber reinforcing materials (JSCE-E131-1995)." Proc., 3rd Int. Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, Vol. 1, Japan Concrete Institute, Tokyo, 167-173.
98. Vinson, J. R. (1999). The behavior of sandwich structures of isotropic and composite materials, Technomic, Lancaster, Pa.
99. Werner, R. I. (1979). "Properties of pultruded sections of interest to designers." Proc., 34th Annual Technical Conf., Reinforced Plastics/Composites Institute, Society of the Plastics Industry, Inc., Washington, D.C., 1-7.
100. Winistoerfer, A., and Mottram, T. (1997). "The future of pin-loaded straps in civil engineering applications." Recent Advances in Bridge Engineering, Proc., U.S.-Canada-Europe Workshop on Bridge Engineering, U. Meier and R. Betti, eds., EMPA, Duebendorf, Switzerland, 115-120.
101. Zureick, A., and Steffen, R. (2000). "Behavior and design of concentrically loaded pultruded angle struts." J. Struct. Eng., 126(3), 406-416.