Advanced Safety Management Focusing on Z10 and Serious Injury Prevention

Advanced Safety Management Focusing on Z10 and Serious Injury Prevention

Volumn , Issue , 2007, Pages 1-416

  Manuele, Fred A ^a  

^a Hazards Limited   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84889296485     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470192696     Document Type: Book

References (210)

1. Abrams, Adele. Legal Perspectives-ANSI Z10-2005 Standard: Occupational Health and Safety Management Systems. Des Plaines, IL: American Society of Safety Engineers, March 2006.
2. ANSI/AIHA Z10-2005. Occupational Health and Safety Management Systems Standard. Fairfax, VA: American Industrial Hygiene Association, 2005. Also available at, http://www.aiha.org/marketplace.htm.
3. ANSI/ISO/ASQ Q9000-2000 Series. Quality Management Systems Standards. Milwaukee, WI: American Society for Quality, 2000.
4. Barnett, Ralph L. "Minimum Safety Standard-An Oxymoron." Safety Bulletin 5, no. 3. June 1997
5. Casada, M. L., A. C. Remson, D. A. Walker, and J. S. Arendt. A Manager's Guide to Implementing and Improving Management of Change Systems. Washington, DC: Chemical Manufacturers Association, 1993.
6. Christensen, Wayne C., and Fred A. Manuele, eds. Safety Through Design. Itasca, IL:National Safety Council, 1999.
7. ILO-OSH 2001. Guidelines on Occupational Health and Safety Management Systems.
8. Geneva, Switzerland: International Labour Organization, 2001. http://www.ilo.org/ public/english/support/publ/xtextoh.htm.
9. ISO 14000 Series on Environmental Management. http://www.iso.org/iso/en/prods-services/ otherpubs/iso14000/index.html.
10. Manuele, Fred A. On the Practice of Safety, 3rd ed. Hoboken, NJ: John Wiley & Sons, 2003.
11. Manuele, Fred A. "Risk Assessment and Hierarchies of Control." Professional Safety, May 2005.
12. OSHA Rule for Process Safety Management of Highly Hazardous Chemicals. 29 CFR 1910.119. Washington, DC: U.S. Department of Labor, 1992.
13. Stephans, R. A., and W. W. Talso. System Safety Analysis Handbook, 2nd ed. Albuquerque, NM: System Safety Society, 1997.
14. U.S. EPA. Environmental Management Systems (EMS): Plan, Do, Check, Act Model. http://www.epa.gov/ems/info/plan.htm.
15. ANSI/ISO/ASQ Q9001-2000. American National Standard: Quality Management systems-Requirements. Milwaukee, WI: American Society For Quality, 2000.
16. Deming, W. Edwards. Out of the Crisis. Cambridge, MA: Massachusetts Institute of Technology for Advanced Engineering Study, 1982.
17. Deming, W. Edwards. The New Economics for Industry, Government, Education, Second Edition. © 2000W. Edwards Deming Institute. Published Cambridge, MA: The MIT Press, 1994.
18. Environmental Management Systems: An Implementation Guide for Small and Medium Sized Organizations. http://www.epa.gov/ems/info/plan.htm, Copyright is held by NSF International Strategic Registrations, Ltd., Ann Arbor, MI.
19. Manuele, Fred A. On the Practice of Safety, Third Edition. Hoboken, NJ: John Wiley & Sons, 2003.
20. Six Sigma and Beyond: Deming and Six Sigma. http://www.pqsystems.com/eline/2000/ 04/qualitytip.htm.
21. Walton, Mary. Deming Management at Work. New York, Putnam Publishing Group, 1990.
22. Accident Prevention Manual for Industrial Operations: Administration and Programs, 8th ed. Itasca, IL: National Safety Council, 1980.
23. Accident Prevention Manual for Industrial Operations: Administration & Programs, 12 ed. Itasca, IL: National Safety Council, 2001.
24. Bureau of Labor Statistics. "Lost-Worktime Injuries and Illnesses: Characteristics and Resulting Time Away From Work." http://www.bls.gov/iif.
25. Columbia Accident Investigation Report, Vol. 1. Washington, DC: NASA, August 2003. Also available at http://www.nasa.gov/columbia/home/CAIB Vol1.html.
26. DNV Consulting. "Leading Indicators for Major Accident Hazards-An Invitation to Industry Partners." http://www.Robin.Pitblado@dnv.com.
27. Employers Insurance of Wansau. "Pareto's Law and the Vital Few."
28. Heinrich, H. W. Industrial Accident Prevention, 4th ed. New York: McGraw-Hill, 1959.
29. Inflation Data. http://www.InflationData.com.
30. Injury Facts, 2003 Edition. Itasca, IL: National Safety Council, 2003.
31. Johnson, James. Managing director, Liberty Mutual Insurance Company. Presentation at the 2004 Behavioral Safety Now Conference Reno, Nevada.
32. Johnson, William G. MORT Safety Assurance Systems. New York: Marcel Dekker, 1980.
33. Manuele, Fred A. "Injury Ratios." Professional Safety, February 2003.
34. Manuele, Fred A. Innovations in Safety Management: Addressing Career Knowledge Needs. Hoboken, NJ: John Wiley & Sons, 2001.
35. Manuele, Fred A. "Is a Major Accident About to Occur in Your Operations?" Professional Safety, May 2004.
36. Manuele, Fred A. On the Practice of Safety, 3rd ed. Hoboken, NJ: John Wiley & Sons, 2003.
37. Mealy, Dennis. "State of the Line." National Council on Compensation Insurance News Bulletin, 2005 and 2006. http://www.ncci.com.
38. Mirer, Franklin. Director, UAW Health and Safety Department. April 2004, presentation in Detroit, MI.
39. Norman, Donald A. The Psychology of Everyday Things. New York: Basic Books, 1988.
40. Petersen, Dan. Safety Management, 2nd ed. Des Plaines, IL: American Society of Safety Engineers, 1998.
41. Reason, James. Managing the Risks of Organizational Accidents. Burlington, VT: Ashgate Publishing Company, 1997.
42. Reason, James, and Alan Hobbs. Managing Maintenance Error: A Practical Guide. Burlington, VT: Ashgate Publishing Company, 2003.
43. Simon, Steven I., and Patrick R. Frazee. "Building a Better Safety Vehicle: Leadership-Driven Culture Change at General Motors." Professional Safety, January 2005.
44. Whittingham, R. B. The Blame Machine: Why Human Error Causes Accidents. Burlington, MA: Elsevier Butterworth-Heinemann, 2004.
45. Workers Compensation Claim Frequency Down again: NCCI, 2005
46. Walten Mary. Deming Management at Work. New York: Rutnam Publishing Group, 1990.
47. "Task Analysis Methods: Critical Incident Technique." Infopolis at www. ul ie/ infopolis/ methods/incident-html
48. 2003 Liberty Mutual Workplace Safety Index. Liberty Mutual Insurance Company. Hopkinton, MA Walton, Mary. The Deming Management Method. New York: Putnam Publishing Company, 1986
49. Whittingham, R. B. The Blame Machine: Why Human Error Causes Accidents. Burlington, MA: Elsevier Butterworth-Heinemann, 2004.
50. "Workers Compensation Claim Frequency Down Again." National Council on Compensation Insurance News Bulletin, June 2005
51. Accident Prevention Manual: Administration & Programs, Twelfth Edition. Itasca, IL:National Safety council, 2001
52. Johnson, William G. MORT Safety Assurance Systems. New York: Marcel Dekker, 1980
53. Manuele, Fred A. On the Practice of Safety, 3rd ed. Hoboken, NJ: John Wiley & Sons, 2003.
54. Tarrants, William, ED. The Measurement of Safety Performance. New York: Garland Press Publishing, 1980
55. "Task Analysis Methods: Critical Incident Technique." www. ul ie/ infopolis/methods/ incident-html
56. Welker, Paul A. et al. "The Critical Incident Technique" A Manual for Its Planning and Implementation." www.tiu.edu/psychology/Twelker/critical incidenttechnique.htm
57. Chapanis, Alphonse. "The Error-Provocative Situation". In The Measurement of Safety Performance, edited by William E. Tarrants. New York: Garland Publishing, 1980.
58. Guidelines for Preventing Human Error in Process Safety. New York: Center for Chemical Process Safety of the American Institute of Chemical Engineers, 1994.
59. Hammer, Willie. Handbook of System and Product Safety. Englewood, NJ: Prentice Hall, 1972.
60. Johnson, W. Human Error, Safety and Systems Development. Norwell, MA: Kluwer Academic Publishers, 2004.
61. Kletz, Trevor. An Engineer's View of Human Error, 2nd ed. Rugby, Warwickshire, UK:Institution of Chemical Engineers, 1991.
62. Krause, Thomas A. "Moving to the 2nd Generation in Behavior-Based Safety". ASSE Professional Development Conference, orlando, Florida, June 2000.
63. Krause, Thomas A. "Moving to the 2nd Generation in Behavior-Based Safety." Professional Safety, May 2001.
64. Krause, Thomas A. "Improving the Working Interface." Occupational Hazards, June 2001.
65. Krause, Thomas A. "Influencing the Behavior of Senior Leadership." Professional Safety, June 2004.
66. Krause, Thomas R. Leading with Safety. Hoboken, NJ: John Wiley & Sons, 2005.
67. Manuele, Fred A. On the Practice of Safety, 3rd ed. New York Hoboken, NJ: John Wiley & Sons, 2003.
68. Norman, Donald A. The Psychology of Everyday Things. New York: Basic Books, 1988.
69. Reason, James. Human Error. Cambridge, UK: Cambridge University Press, 1990.
70. Reason, James. Managing the Risks of Organizational Accidents. Burlington, VT: Ashgate Publishing Company, 1997.
71. Rothblum, Anita A. "Human Error and Marine Safety." U.S. Coast Guard Research & Development Center. http://www.uscg.mil/hq/g-m/risk/e-guidelines/RBDM/html/vol4/Volume4/Gen Rec/HumanErr.htm.
72. Strater, Oliver. Cognition and Safety: An Integrated Approach to Systems Design and Assessment. Burlington, VT: Ashgate Publishing Company, 2005.
73. Swain, A. D. A Method of Performing a Human Reliability Analysis. Monograph SCR-685. Albuquerque, NM: Sandia National Laboratories, 1963.
74. Whittingham, R. B. The Blame Machine: Why Human Error Causes Accidents. Burlington, MA: Elsevier Butterworth Heinemann, 2004.
75. Bayer Corporation. Health, Safety and Environment Report. http://www.bayerUSA.com.
76. British Petroleum. Fatal Accident Investigation Report, Isomerization Unit Explosion Final Report, Texas City, Texas, USA. http://www.bp.com/liveassets/bp internet/globalbp/STAGING/global assets/downloads/T/texas city investigation report.pdf#search ='Fatal %20Accident%20Investigation%20Report%2C%20BP'.
77. Columbia Accident Investigation Board Report, Vol. 1. Washington, DC: NASA, August 2003. Also available at http://www.nasa.gov/columbia/home/AIB Vol1.html.
78. DuPont. Sustainable Growth 2004 Progress Report-Safety, Health & Environmental Section. http://www.dupont.com.
79. Hama, Norika. Speech at a symposium "Economic and structural Refarms in Japan and Germany." Tokyo, Japan, February 2004.
80. Intel Corporation. Environmental, Health and Safety Report 2004. http://www.intel.com.
81. Johnson & Johnson. 2004 Sustainability Report. http://www.jnj.com.
82. Manuele, Fred A. On the Practice of Safety, 3rd ed. Hoboken, NJ: John Wiley & Sons, 2003.
83. Petersen, Dan. "Understanding Human Error: It's Safety's next frontier." ASSE Symposium on Human Error in Occupational Safety Symposium Atlanta, GA, 2003.
84. Petersen, Dan. "Human Error". Des Plaines. IL: American Society of Safety Engineer Magazine Professional Safety, December 2003.
85. Report of the OECD Workshop on Lessons Learned from Chemical Accidents and Incident, 21-23 September 2004, Karlskoga, Sweden. Paris: Organization for Economic Cooperation and Development, 2005. Also available at http://appli1.oecd.org/olis/2005 doc.nsf/43bb6130e5e86e5fc12569fa005d004c/e6de9b632c0d0368c1256fd400348fa5/$FILE/JT00182564.PDF.
86. Reason, James. Managing the Risks of Organizational Accidents. Burlington, VT: Ashgate Publishing Company, 2001.
87. Sutton, Robert I. http://www.bobsutton.typepad.com. Comments made "Bobsutton work matters".
88. Whittingham, R. B. The Blame Machine: Why Human Error Causes Accidents. Burlington, MA: Elsevier Butterworth Heinemann 2004.
89. ALARP "at a Glance." London, UK: Health and Safety Executive. Also available at http://www.hse.gov.uk/risk/theory/alarpglance.htm.
90. ANSI/PMMI B155.1-2006. Safety Requirements for Packaging Machinery and Packaging-Related Converting Machinery Standard. Arlington, VA: Packaging Machinery Manufacturers Institute, 2006.
91. ANSI/RIA R15.06-1999. Safety Requirements for Industrial Robots and Robot Systems Standard. http://www.robotics.org.
92. ISO/IEC Guide 51. Safety Aspects-Guidelines for Their Inclusion in Standards. Geneva, Switzerland: International Organization for Standardization, 1999.
93. Lowrance, William F. Of Acceptable Risk: Science and the Determination of Safety. Los Altos, CA: William Kaufman, Inc., 1976.
94. Manuele, Fred A., and Bruce Main. "On Acceptable Risk." Occupational Hazards, January 2002.
95. Manuele, Fred A. On the Practice of Safety, 3rd ed. Hoboken, NJ: John Wiley & Sons, 2003.
96. MIL-STD 882E, Standard Practice for System Safety. Washington, DC: Department of Defense, a works in progress
97. NASA-STD-8719.7. Facilities System Safety Handbook. Washington, DC: NASA, January 1998.
98. USDL 05-1598. National Census of Fatal Occupational Injuries in 2005. Washington, DC:Bureau of Labor Statistics, U.S. Department of Labor, 2006.
99. ANSI/AIHA Z10-2005. Occupational Health and Safety Management Systems Standard. Fairfax, VA: American Industrial Hygiene Association, 2005. Also available at http://www.aiha.org/marketplace.htm.
100. ANSI/PMMI B155.1-2006. Safety Requirements for Packaging Machinery and Packaging-Related ConvertingMachinery Standard. Arlington, VA: Packaging Machinery Manufacturers Institute, 2006.
101. Clemens, Pat. A Compendium of Hazard Identification and Evaluation Techniques for System Safety Application. Hazard Prevention, March/April 1982.
102. Failure Mode and Effects Analysis (FMEA): A Guide for Continuous Improvement for the Semiconductor Equipment Industry. Technology Transfer #92020963A-ENG. Austin, TX:International SEMATECH, 1992. Also available at http://www.sematech.org.
103. Framework for Environmental Health Risk Management, Final Report, Vol. 1. Washington, DC: The Presidential/Congressional Commission on Risk Assessment and Risk Management, 1997.
104. Guide to Use of the Management Oversight and Risk Tree-SSDC-103. Washington, DC:Department of Energy, 1994.
105. Guidelines for Hazard Evaluation Procedures, Second Edition with Worked Examples. New York: Center for Chemical Process Safety of the American Institute of Chemical Engineers, 1992.
106. ISO 12100-1. Safety of Machinery-Basic Concepts, General Principles for Design; Part 1. Basic Terminology, Methodology. Geneva, Switzerland: International Organization for Standardization, 2003.
107. ISO 12100-2. Safety of Machinery-Basic Concepts, General Principles for Design; Part 2. Technical Principles and Specification. Geneva, Switzerland: International Organization for Standardization, 2003.
108. ISO 14121. Safety of Machinery-Principles for Risk Assessment. Geneva, Switzerland:International Organization for Standardization, 1999.
109. Johnson, William G. MORT Safety Assurance Systems. New York: Marcel Dekker, 1980.
110. Manuele, Fred A. On the Practice of Safety, 3rd ed. Hoboken, NJ: John Wiley & Sons, 2003.
111. McDermott, Robin E., Raymond J. Mikulak, and Michael R. Beauregard. The Basics of FMEA. New York: Productivity Press, 1996.
112. MIL-STD-882D and E. Standard Practice for System Safety. Washington, DC: Department of Defense, 2000. Also available at http://www.safetycenter.navy.mil/instructions/ osh/milstd882d.pdf#search = 'MILSTD882D'.
113. OSHAs Rule for Process Safety Management of Highly Hazardous Chemicals, 29 CFR 1910.119. Washington, DC: Department of Labor, Occupational Safety and Health Administration, 1992.
114. Potential Failure Mode and Effects Analysis: FMEA., 3rd ed. Southfield, MI: Automotive Industry Action Group (AIAG), 2001.
115. Stephans, R. A., and W. W. Talso. System Safety Analysis Handbook, 2nd ed. Albuquerque, NM: System Safety Society, 1997.
116. Grose, Vernon L. Managing Risk, Systematic Loss Prevention for Executives. Englewood Cliffs, NJ: Prentice-Hall, 1987. Now available through Omega Systems Group, Arlington, VA.
117. Roland, Harold E., and Brian Moriarty. System Safety Engineering and Management, 2nd ed. New York: John Wiley & Sons, 1990.
118. Stevens, Richard A. System Safety for the 21st Century. Hoboken, NJ: John Wiley & Sons, 2004. (This is an updated version of System Safety 2000 by Joe Stephenson.)
119. ANSI/ASSE Z241.1-2003. Control of Hazardous Energy-Lockout/Tagout and Alternative Methods Standard. Des Plaines, IL: American Society of Safety Engineers, 2003.
120. ANSI/AIHA Z10-2005. Occupational Health and Safety Management Systems Standard. Fairfax, VA: American Industrial Hygiene Association, 2005.
121. ANSI/PMMI B155.1-2006. Safety Requirements for Packaging Machinery and Packaging-Related ConvertingMachinery Standard. Arlington, VA: Packaging Machinery Manufacturers Institute, 2006.
122. ANSI/RIA R15.06-1999. American National Standard for Industrial Robots and Robot Systems-Safety Requirements. Ann Arbor, MI: Robotics Industries Association, 1999.
123. ASTM. Standard Guide for Developing a Cost-Effective Risk Mitigation Plan. Working number WK7175. http://www.astm.org/cgi-bin/SoftCart.exe/index.shtml?E + mystore.
124. Aviation Ground Operation Safety Handbook, 5th ed. Itasca, IL: National Safety Council, 2000.
125. B11.TR3. Risk Assessment and Reduction-A Guideline to Estimate, Evaluate and Reduce Risks Associated with Machine Tools. McLean, VA: The Association for Manufacturing Technology, 2000.
126. Bowers, Charles N. The Risk Is in the Management. Maintenance Technology, June 2006.
127. CSA Standard Z1000-06. Occupational Health and Safety Management Standard. Mississauga, Ontario, Canada: Canadian Standards Association, 2006.
128. Guidance Document for Incorporating Risk Concepts into NFPA Codes and Standards. Quincy, MA: National Fire Protection Association, March 2007.
129. Guidelines for Hazard Evaluation Procedures, Second Edition with Worked Examples. New York: Center for Chemical Process Safety of the American Institute of Chemical Engineers, 1992.
130. ISO 10218:1992. Manipulating Industrial Robots-Safety Standard. Geneva, Switzerland:International Organization for Standardization, 1992. Also available at, http://www. iso.ch/iso/en/aboutiso/introduction/index.html.
131. ISO 12100-1. Safety of Machinery-Basic Concepts, General Principles for Design; Part 1:Basic Terminology, Methodology. Geneva, Switzerland: International Organization for Standardization, 2003.
132. ISO 12100-2. Safety of Machinery-Basic Concepts, General Principles for Design; Part 2:Technical Principles and Specifications. Geneva, Switzerland: International Organization for Standardization, 2003.
133. ISO 14121. Safety of Machinery-Principles for Risk Assessment Standard. Geneva, Switzerland: International Organization for Standardization, 1999.
134. MIL-STD-882D and MIL-STD-882E. Standard Practice for System Safety. Washington, DC:Department of Defense, 2000 and 2006.
135. OSHA Rule for Process Safety Management of Highly Hazardous Chemicals, CFR 1910.119. Washington, DC: Department of Labor, Occupational Safety and Health Administration, 1992.
136. Risk Management Programs for Chemical Accidental Release Prevention, 40 CFR, Part 68. Washington, DC: Environmental Protection Agency, 1996.
137. SEMI S2-0706. Environmental, Health, and Safety Guideline for Semiconductor Manufacturing Equipment. San Jose, CA: Semiconductor Equipment and Materials International, 2006. (Related Information 1-Equipment/Product Safety Program is an adjunct to these guidelines.)
138. SEMI S10-1103. Safety Guideline for Risk Assessment and Risk Evaluation Process. San Jose, CA: Semiconductor Equipment and Materials International, 2003.
139. Accident Prevention Manual: Administration & Programs, 12th ed. Itasca, IL: National Safety Council, 2001.
140. Failure Mode and Effects Analysis (FMEA): A Guide for Continuous Improvement for the Semiconductor Equipment Industry. Technology Transfer #92020963A-ENG. Austin, TX:International SEMATECH, 1992. Also available at http://www.sematech.org.
141. Fine, William T. Mathematical Evaluations for Controlling Hazards. White Oak, MD: Naval Ordinance Laboratory, 1971.
142. Grose, Vernon L. Managing Risk: Systematic Loss Prevention for Executives. Originally published by Prentice-Hall, 1987. Now available through Omega Systems Group, Inc., Arlington, VA.
143. ISO 14121. Safety of Machinery-Principles for Risk Assessment Standard. Geneva, Switzerland: International Organization for Standardization, 1999.
144. Pilz. Guide to Machinery Safety, 6th ed. Farmington, MI: Pilz Automation Technology, 1999.
145. Potential Failure Mode and Effects Analysis: FMEA, 3rd ed. Southfield, MI: Automotive Industry Action Group, 2001.
146. Accident Prevention Manual: Administration & Programs, 12th ed. Itasca, IL: National Safety Council, 2001.
147. Hill, Darryl C., ed. Construction Safety Management and Engineering. Des Plaines, IL:American Society of Safety Engineers, 2004.
148. Accident Prevention Manual, 3rd ed. Itasca, IL: National Safety Council, 1955.
149. ANSI/AIHA Z10-2005. Occupational Health and Safety Management Systems Standard. Fairfax, VA: American Industrial Hygiene Association, 2005. Also available at, http://www.aiha.org/marketplace.htm.
150. ANSI/PMMI B155.1-2006. Safety Requirements for Packaging Machinery and Packaging-Related Converting Machinery Standard. Arlington, VA: Packaging Machinery Manufacturers Institute, 2006.
151. ANSI/RIA R15.06-1999. American National Standard for Industrial Robots and Robot Systems-Safety Requirements. Ann Arbor, MI: Robotics Industries Association, 1999.
152. Chapanis, Alphonse. "The Error-Provocative Situation". In The Measurement of Safety Performance, edited by William E. Tarrants. New York: Garland Publishing, 1980.
153. Haddon, William J., Jr. "On the Escape of Tigers: An Ecological Note." Technology Review, May 1970.
154. Kepner, Charles H., and Benjamin B. Tregoe. The New Rational Manager. Princeton, NJ:Princeton Research Press, 1981.
155. Manuele, Fred A. "Achieving Risk Reduction, Effectively." Process Safety and Environmental Protection, May 2006.
156. Manuele, Fred A. Innovations in Safety Management: Addressing Career Knowledge Needs. Hoboken, NJ: John Wiley & Sons, 2001.
157. Manuele, Fred A. On the Practice of Safety, 3rd ed. Hoboken, NJ: John Wiley & Sons, 2003.
158. Manuele, Fred A. "Risk Assessment and Hierarchies of control." Professional Safety, May 2005.
159. MIL-STD-882D. Military Standard System Safety Program Requirements. Washington, DC:Department of Defense, 2000.
160. NFPA 101. Life Safety Code. Quincy, MA: National Fire Protection Association, 2006.
161. ANSI/AIHA Z10-2005. Occupational Health and Safety Management Systems Standard. Fairfax, VA: American Industrial Hygiene Association, 2005. Also available at http://www.aiha.org/marketplace.htm.
162. Brander, Roy. The Titanic and Risk Management. http://www.cuug.ab.ca/~brander/titanic/NDIA/NDIA lecture.html.
163. Christensen, Wayne C., and Fred A. Manuele, eds. Safety Through Design. Itasca, IL:National Safety Council, 1999.
164. Design for EHS: Equipment Design Philosophy. Chandler, AZ: Intel Corporation, 1999.
165. Ergonomic Design Criteria. DaimlerChrysler. https://gsp.extra.daimlerchrysler.com/mfg/ amedd/tooldesign/textsection15.htm.
166. Guidelines for Hazard Evaluation Procedures, 2nd ed. New York: Center for Chemical Process Safety of the American Institute of Chemical Engineers, 1992.
167. Haddon, William, Jr. "On the Escape of Tigers: An Ecologic Note." Technical Review, May 1970.
168. ISO 14121. Safety of Machinery-Principles for Risk Assessment. Standard Geneva, Switzerland, International Organization for Standardization, 2003.
169. Main, Bruce W. Risk Assessment: Basics and Benchmarks. Ann Arbor, MI: design safety engineering, inc., 2004.
170. Dennis, Pascal. Lean Production Simplified: A Plain-Language Guide to the World's Most Powerful Production System. Shelton, CT: Productivity Press, 2002.
171. Designing for Safety and Lean Manufacturing: A Guide on Integrating Safety and Lean Manufacturing Principles in the Use of Machinery, TR7. McLean, VA: Association for Manufacturing Technology, expected a Technical Report in progress with third qualter 2007 publication.
172. EPA. Lean and Environment Toolkit. "How to Incorporate Environmental Considerations into Value Stream Mapping." http://www.epa.gov/epainnov/lean/toolkit/ch3.htm#definition.
173. Imai, Masaaki. Gemba Kaizen: A Commonsense Low-Cost Approach to Management. New York: McGraw-Hill, 1997.
174. Newman, Kevin, and Theodore Braun. "Advice on Incorporating Ergonomic Safety Initiatives into Your Continuous Improvement Process." Occupational Hazards, August 2 2005.
175. Rother, Mike, and John Shook. Learning to See: Value Stream Mapping to Create Value and Eliminate Muda. Cambridge, MA: Lean Enterprise Institute, 2003.
176. Womack, James P., and Daniel T. Jones. Lean Thinking: Banish Waste and Create Wealth in Your Corporations, 2nd ed. Northampton, MA: Free Press, 2003.
177. ANSI/ASQ Q9001-2000. Quality Management Systems-Requirements Standard. Milwaukee, WI: American Society for Quality, 2000.
178. Aviation Ground Operations Safety Handbook, 5th ed. Itasca, IL: National Safety Council, 2000.
179. Johnson, William G. MORT Safety Assurance Systems. New York: Marcel Dekker, 1980.
180. OSHA Rule for Process Safety Management of Highly Hazardous Chemicals, 29 CFR 1910.119. Washington, DC: U.S. Department of Labor, 1992.
181. Process Safety Management Guideline for Compliance, 1910.119. OSHA Bulletin 3133. http://www.osha.gov/Publications/osha3133.html.
182. Safety & Health Management System eTool-Worksite Analysis. Washington, DC: U.S. Department of Labor, OSHA. Also available at http://www.osha.gov/SLTC/etools/ safetyhealth/comp2.html.
183. Stephens, Richard A. System Safety for the 21st Century. Hoboken, NJ: John Wiley & Sons, 2004.
184. ANSI/AIHA Z10-2005. Occupational Health and Safety Management Systems Standard. Fairfax, VA: American Industrial Hygiene Association, 2005. Also available at, http://www.aiha.org/marketplace.htm.
185. Ergonomic Design Criteria. DaimlerChrysler. https://gsp.extra.daimlerchrysler.com/mfg/ amedd/tooldesign/textsection15.htm.
186. Johnson & Johnson. "Zero Access". http://www.jnj.com/community/health safety/programs/Machine Safety.htm.
187. SEMI S2-0706. Environmental, Health, and Safety Guideline for Semiconductor Manufacturing Equipment. San Jose, CA: Semiconductor Equipment and Materials International, 2006. (Related Information 1-Equipment/Product Safety Program is an adjunct to these guidelines.)
188. Guidelines for Preventing Human Error in Process Safety. New York: Center for Chemical Process Safety of the American Institute of Chemical Engineers, 1994.
189. Manuele, Fred A. On the Practice Of Safety. Hoboken, NJ: John Wiley & Sons, 2003.
190. Simon, Steven I., and Patrick R. Frazee. "Building a Better Safety Vehicle: Leadership-Driven Culture Change at General Motors." Professional Safety, January 2005.
191. Whittingham, R.B. The Blame Machine: Why Human Error Causes Accidents. Barlington, MA: Elsevier Butterworth-Heinemann, 2004.
192. "Auditor Competency for Assessing Occupational Health & Safety Management Systems." The American Society of Safety Engineers, the American Industrial Hygiene Association, and the American Board of Industrial Hygiene, August 2005. http://www.aiha.org/ 1documents/Governmentaffairs/p auditor%20position%paper 8-25-05.pdf
193. Kase, Donald W., and Kay J. Wiese. Safety Auditing: A Management Tool. New York: John Wiley & Sons, 1990.
194. Manuele, Fred A. On the Practice Of Safety. Hoboken, NJ: John Wiley & Sons, 2003.
195. Petersen, Dan. "What Measures Should We Use, and Why?" Professional Safety, October 1998.
196. "The Program Evaluation Profile (PEP)." U.S. Department of Labor, OSHA. http://www. osha.gov/SLTC/safetyhealth/pep.html.
197. "Safety and Health Management Systems eTool-Safety and Health Assessment Worksheet." U.S. Department of Labor, OSHA. http://www.osha.gov/SLTC/etools/safety health/asmnt worksheet.html.
198. VPP Site Worksheet. Appendix E, Section C, Comprehensive Safety and Health Management System Requirements. In CSP 03-01-002-TED 8.4-Voluntary Protection Programs (VPP): Policies and Procedures Manual, Chapter III, Requirements for Star, Merit, Resident Contractor, Construction Industry, and Federal Agency Worksites. http://www.osha.gov/pls/oshaweb/owadisp.show document?p table=DIRECTIVES&p id=2976.
199. ANSI/AIHA Z10-2005. Occupational Health and Safety Management Systems Standard. Fairfax, VA: American Industrial Hygiene Association, 2005. Also available at http://www.aiha.org/marketplace.htm.
200. Report of the BP U.S. Refineries Independent Safety Review Panel. http://www.safetyreview panel.com/index.php.
201. ANSI/AIHA Z10-2005. Occupational Health and Safety Management Systems Standard. Fairfax, VA: American Industrial Hygiene Association, 2005. Also available at http://www.aiha.org.
202. BS 8800-2004. Occupational Health and Safety Management Systems-Guide. London:British Standards Institute, 2004.
203. "Growth of VPP." http://www.osha.gov/dcsp/vpp/charts/html.
204. ILO-OSH 2001. Guidelines on Occupational Safety and Health Management Systems. Geneva, Switzerland: International Labor Organization, 2001.
205. OSHA. Voluntary Protection Programs (VPP): Policies and Procedures Manual, CSP 03-01-002-TED 8.4. http://www.osha.gov/pls/oshaweb/owadisp.show document?p table=DIRECTIVES&p id=2976.
206. OSHA. VPP Corporate Pilot Program. www.Osha.gov/OshDOC/data General facts/vppcorporate- pilot.
207. "OSHA's VPP Corporate Pilot Program. General Electric and Others Admitted." http://www.releases.usnewswire.com/printing.asp?id=71265).
208. OHSAS 18001:1999. Occupational Health and Safety Management Systems-Specification. London: British Standards Institute, 1999.
209. "Safety and Health Program Management Guidelines." Occupational Safety and Health Administration, Federal Register, January 26, 1989.
210. "VPP-Recognizing Excellence in Safety and Health." http://www.osha.gov/Publications/VPP/vpp kit.html.