Sustainability indicators for grinding applied to dressing strategies

Journal of Manufacturing Science and Engineering

Volumn 135, Issue 5, 2013, Pages

  Linke, Barbara Sabine ^a  

^a University of California   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ENVIRONMENTAL PROTECTION; GRINDING (MACHINING);

DISCRETE MANUFACTURING; ENVIRONMENTAL AWARENESS; HOLISTIC APPROACH; MANUFACTURING PROCESS; MATERIAL EFFICIENCY; SUSTAINABILITY ANALYSIS; SUSTAINABILITY INDICATORS; TEMPORAL AND SPATIAL;

SUSTAINABLE DEVELOPMENT;

EID: 84888865262     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.4025191     Document Type: Article

References (46)

1. Allan, D., Bauer, D., Bras, B., Gutowski, T., Murphy, C., Piwonka, T., Sheng, P., Sutherland, J., Thurston, D., and Wolff, E., 2002, "Environmentally Benign Manufacturing: Trends in Europe, Japan, and the USA," ASME J. Manuf. Sci. Eng., 124, pp. 908-920. (Pubitemid 35384310)
2. Duflou, J. R., Sutherland, J. W., Dornfeld, D., Herrmann, C., Jeswiet, J., Kara, S., Hauschild, M., and Kellens, K., 2012, "Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach," CIRP Ann., 61(2), pp. 587-609.
3. Dornfeld, D., 2010, "Sustainable Manufacturing-Greening Processes, Systems and Products," Proceedings of the ICMC Sustainable Production for Resource Efficiency and Ecomobility, Chemnitz, Germany, September.
4. Haapala, K. R., Catalina, A. V., Johnson, M. L., and Sutherland, J. W., 2012, "Development and Application of Models for Steelmaking and Casting Environmental Performance," ASME J. Manuf. Sci. Eng., 134, p. 051013.
5. Haapala, K. R., Zhao, F., Camelio, J., Sutherland, J. W., Skerlos, S. J., Dornfeld, D. A., Jawahir, I. S., Clarens, A. F., and Rickli, J. L., 2013, "A Review of Engineering Research in Sustainable Manufacturing," ASME J. Manuf. Sci. Eng., 135, p. 041014.
6. Hauschild, M., Jeswiet, J., and Alting, L., 2005, "From Life Cycle Assessment to Sustainable Production: Status and Perspectives," CIRP Ann., 54(2), pp. 1-21.
7. Yuan, C., Zhai, Q., and Dornfeld, D., 2012, "A Three Dimensional System Approach for Environmentally Sustainable Manufacturing," CIRP Ann., 61(1), pp. 39-42.
8. Jayal, A. D., Badurdeen, F., Dillon, O. W., and Jawahir, I. S., 2010, "Sustainable Manufacturing: Modeling and Optimization Challenges at the Product, Process and System Levels," CIRP J. Manuf. Sci. Technol., 2(3), pp. 144-152.
9. Reich-Weiser, C., Vijayaraghavan, A., and Dornfeld, D., 2008, "Metrics for Sustainable Manufacturing," Proceedings of the 2008 International Manufacturing Science and Engineering Conference, MSEC, Evanstown, IL, October.
10. Kellens, K., Dewulf, W., Overcash, M., Hauschild, and M., Duflou, J. R., 2012, "Methodology for Systematic Analysis and Improvement of Manufacturing Unit Process Life Cycle Inventory, Part 1: Methodology Description," Int. J. Life Cycle Assess., 17(1), pp. 69-78.
11. OECD, 2011, "OECD Sustainable Manufacturing Toolkit," Retrieved on May 15, 2012, www.oecd.org/innovation/green/toolkit
12. Lu, T., Rotella, G., Badurdeen, F., Dillon, O. W., Rouch, K. E., and Jawahir, I. S., 2012, "A Metrics-Based Sustainability Assessment for Different Coolant Applications in a Turning Process," Proceedings of the CIRP GCSM, Turkey, pp. 564-569.
13. Joung, C. B., Carrell, J., Sarkar, P., and Feng, S. C., 2012, "Categorization of Indicators for Sustainable Manufacturing," Ecol. Indicators, 24, pp. 148-157.
14. Sarkar, P., Joung, C. B., Carrell, J., and Feng, S. C., 2011, "Sustainable Manufacturing Indicator Repository," ASME Proceedings on 31st Computers and Information in Engineering Conference, Parts A and B, Washington, DC, Aug. 28-31, Vol. 2, pp. 943-950.
15. National Institute of Standards and Technology (NIST), 2011, "Sustainable Manufacturing Indicator Repository", Retrieved on May 2, 2013, http://www.mel.nist.gov/msid/SMIR/index.html
16. Linke, B., and Overcash, M., 2012, "Life Cycle Analysis of Grinding," Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Berkeley, CA, pp. 293-298.
17. Helu, M., Vijayaraghavan, A., and Dornfeld, D., 2011, "Evaluating the Relationship Between Use Phase Environmental Impacts and Manufacturing Process Precision," CIRP Ann., 60(1), pp. 49-52.
18. Linke, B., Duscha, M., Klocke, F., and Dornfeld, D., 2011, "Combination of Speed Stroke Grinding and High Speed Grinding With Regard to Sustainability," Proceedings of the 44th CIRP International Conference on Manufacturing Systems, Madison, WI, June 1-3.
19. Malkin, S., and Guo, C., 2008, Grinding Technology: Theory and Application of Machining With Abrasives, 2nd ed., Industrial Press, New York.
20. Klocke, F., 2009, Manufacturing Processes 2-Grinding, Honing, Lapping, RWTH ed., A. Kuchle, translator, Springer, Berlin.
21. Marinescu, I. D., Hitchiner, M., Uhlmann, E., Rowe, W. B., and Inasaki, I., 2007, Handbook of Machining With Grinding Wheels, CRC Press, Boca Raton, FL.
22. Rowe, W. B., 2009, Principles of Modern Grinding Technology, William Andrew, Oxford, UK.
23. Jackson, M. J., and Davim, J. P., 2011, Machining With abrasives, Springer, New York.
24. Singh, R. K., Murty, H. R., Gupta, S. K., and Dikshit, A. K., 2012, "An Overview of Sustainability Assessment Methodologies," Ecol. Indicators, 15, pp. 281-299.
25. Linke, B., Corman, G., Dornfeld, D., and Tönissen, S., 2013, "Sustainability Indicators for Discrete Manufacturing Processes Applied to Grinding Technology," J. Manuf. Syst., (in press).
26. Graedel, T., Allenby, B., and Comrie, P., 1995, "Matrix Approaches to Abridged Life Cycle Assessment," Environ. Sci. Technol., 29(3), pp. 134A-139A.
27. Zhang, H., and Haapala, K. R., 2012, "Integrating Sustainability Assessment into Manufacturing Decision Making," Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Berkeley, CA, pp. 551-556.
28. Tönshoff, H. K., Peters, J., Inasaki, I., and Paul, T., 1992, "Modelling and Simulation of Grinding Processes," CIRP Ann., 41(2), pp. 677-687.
29. Li, W., Winter, M., Kara, S., and Herrmann, C., 2012, "Eco-Efficiency of Manufacturing Processes: A Grinding Case," CIRP Ann., 61(1), pp. 59-62.
30. Linke, B., and Dornfeld, D., 2012, "Application of Axiomatic Design Principles to Identify More Sustainable Strategies for Grinding," J. Manuf. Syst., 31(4), pp. 412-419.
31. Suh, N. P., 2001, Axiomatic Design: Advances and Applications, Oxford University Press, Oxford, UK.
32. Chen, X., Rowe, W., Allanson, D. R., and Mills, B., 1999, "A Grinding Power Model for Selection of Dressing and Grinding Conditions," ASME J. Manuf. Sci. Eng., 121, pp. 632-637. (Pubitemid 129675368)
33. Diaz, N., Redelsheimer, E., and Dornfeld, D., 2011, "Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use," Proceedings of the 18th CIRP Conference on Life Cycle Engineering, Braunschweig, Germany, pp. 263-267.
34. Herrmann, C., and Thiede, S., 2009, "Process Chain Simulation to Foster Energy Efficiency in Manufacturing," CIRP J. Manuf. Sci. Technol., 1(4), pp. 221-229.
35. Vijayaraghavan, A., and Dornfeld, D., 2010, "Automated Energy Monitoring of Machine Tools," CIRP Ann., 59(1), pp. 21-24.
36. Hutchins, M., Gierke, J., and Sutherland, J., 2010, "Development of a Framework and Indicators for Societal Sustainability in Support of Manufacturing Enterprise Decisions," Trans. NAMRI/SME, 38, pp. 759-766.
37. de Araujo, J. B., and de Oliveira, J. F. G., 2012, "Evaluation of Two Competing Machining Processes Based on Sustainability Indicators," Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Berkeley, CA, pp. 317-322.
38. Krajn, D., and Glavic, P., 2003, "Indicators of Sustainable Production," Clean Technol. Environ. Policy, 5, pp. 279-288.
39. World Resources Institute and World Business Council for Sustainable Development, 2004, The Greenhouse Gas Protocol, WBCSD, Washington, DC.
40. Duflou, J. R., Kellens, K., Renaldi, Guo, Y., and Dewulf, W., 2012, "Critical Comparison of Methods to Determine the Energy Input for Discrete Manufacturing Processes," CIRP Ann., 61(1), pp. 63-66.
41. Lee, C. W., 2009, "Dynamic Optimization of the Grinding Process in Batch Production," ASME J. Manuf. Sci. Eng., 131, p. 021006.
42. Buttery, T. C., Statham, A., and Percival, J. B., 1979, "Some Effects of Dressing on Grinding Performance," Wear, 55, pp. 195-219. (Pubitemid 9472870)
43. Malkin, S., and Cook, N. H., 1971, "The Wear of Grinding Wheels, Part 2- Fracture Wear," ASME J. Eng. Ind., 93, pp. 1129-1133.
44. Linke, B., 2007, Wirkmechanismen beim Abrichten keramisch gebundener Schleifscheiben, Ph.D. thesis, RWTH Aachen University, Aachen, Germany.
45. Capello, E., and Semeraro, Q., 2002, "Process Parameters and Residual Stresses in Cylindrical Grinding," ASME J. Manuf. Sci. Eng., 124, pp. 615-623. (Pubitemid 35202584)
46. Brinksmeier, E., Cammett, J. T., Koenig, W., Leskovar, P., Peters, J., and Toenshoff, H. K., 1982, "Residual Stresses-Measurement and Causes in Machining Processes," CIRP Ann., 3(2), pp. 491-510. (Pubitemid 13564887)