Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation properties

Composites Science and Technology

Volumn 90, Issue , 2014, Pages 88-95

  Ameli, A ^a   Jahani, D ^a   Nofar, M ^a   Jung, P U ^a   Park, C B ^a  

^a UNIVERSITY OF TORONTO   (Canada)

Author keywords

A. Nanocomposites; B. Impact behavior; B. Mechanical properties; E. Injection molding; Foam

Indexed keywords

CELL MORPHOLOGY; CELLULAR MORPHOLOGY; E. INJECTION MOLDINGS; FLEXURAL RIGIDITIES; FOAM INJECTION MOLDING; IMPACT BEHAVIOR; SPECIFIC MODULUS; THERMAL INSULATION PROPERTIES;

CONSTRUCTION INDUSTRY; DIFFERENTIAL SCANNING CALORIMETRY; INJECTION MOLDING; MORPHOLOGY; NANOCOMPOSITES; POLYESTERS; RIGIDITY; SCANNING ELECTRON MICROSCOPY; VOID FRACTION;

FOAMS;

EID: 84888401408     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2013.10.019     Document Type: Article

References (56)

1. Heino A., Naukkarinen A., Kulju T., Törmälä P., Pohjonen T., Mäkelä E.A. J Biomed Mater Res 1996, 30:187-192.
2. Auras R., Harte B., Selke S. Macromol Biosci 2004, 4:835-864.
3. Ouchi T., Ichimura S., Ohya Y. Polymer 2006, 47:429-434.
4. Suyatma N.E., Copinet A., Tighzert L., Coma V. J Polym Environ 2004, 12:1-6.
5. Luciano R.M., Zavaglia C.A.C., Duek E.A.R., Alberto-Rincon M.C. J Mater Sci: Mater Med 2003, 14:87-94.
6. Pilla S., Kramschuster A., Yang L., Lee J., Gong S., Turng L.S. Mater Sci Eng C 2009, 29:1258-1265.
7. Yuan M., Turng L.S., Gong S., Caulfield D., Hunt C., Spindler R. Polym Eng Sci 2004, 44:673-686.
8. Wong S., Lee J.W.S., Naguib H.E., Park C.B. Macromol Mater Eng 2008, 293:605-613.
9. Hikita K. JSAE Rev 2002, 23:239-244.
10. Lee J.W.S., Park C.B., Kim S.G. J Cell Plast 2007, 43:297-312.
11. Lee J.W.S., Park C.B. Macromol Mater Eng 2006, 291:1233-1244.
12. Lee J.W.S., Wang J., Yoon J.D., Park C.B. Ind Eng Chem Res 2008, 47:9457-9464.
13. Pilla S., Kramschuster A., Gong S., Chandra A., Turng L.S. Int Polym Process 2007, XXII:418-428.
14. Kramschuster A., Pilla S., Gong S., Chandra A., Turng L.S. Int Polym Process 2007, XXII:436-445.
15. Kramschuster A., Gong S., Turng L.S., Li T., Li T., Biob J. Mater Bioenergy 2007, 1:37-45.
16. Hwang S.S., Hsu P.P., Yeh J.M., Chang K.C., Lai Y.Z. Polym Compos 2009, 30:1625-1630.
17. Pilla S., Kramschuster A., Lee J., Auer G.K., Gong S., Turng L.S. Comp Interfaces 2009, 16:869-890.
18. Pilla S., Kramschuster A., Lee J., Clemons C., Gong S., Turng L.S. J Mater Sci 2010, 45:2732-2746.
19. Srithep Y., Nealey P., Turng L.S. Polym Eng Sci 2013, 53:580-588.
20. Wang C., Leung S.N., Bussmann M., Zhai W.T., Park C.B. Ind Eng Chem Res 2010, 49:12783-12792.
21. Leung S.N., Wong A., Wang C., Park C.B. J Supercrit Fluids 2012, 63:187-198.
22. Wong A., Park C.B. Chem Eng Sci 2012, 75:49-62.
23. Park CB, Xu X. Apparatus and method for advanced structural foam molding. US Patent application, Serial No. 11/219,309, filed on September 2, 2005; Canada Patent, Application No. CA2,517,995, filed on September 2, 2005.
24. Xu X., Park C.B., Lee J.W.S., Zhu X. J Appl Polym Sci 2008, 109:2855-2861.
25. Ameli A., Jung P.U., Park C.B. Carbon 2013, 60:379-391.
26. Ameli A., Jung P.U., Park C.B. Compos Sci Technol 2013, 76:37-44.
27. Ameli A., Jahani D., Nofar M., Jung P.U., Park C.B. J Cell Plast 2013, 49:351-374.
28. Djoumaliisky S., Touleshkov N., Kotzev G. Polym-Plas Tech Eng 1997, 36:257-271.
29. Egger P., Fischer M., Kirschling H., Bledzki A.K. Kunststoffe Plast Europe 2005, 95(12):66-70.
30. Sporrer A.N.J., Altstadt V. J Cell Plast 2007, 43:313-330.
31. Ishikawa T., Ohshima M. Polym Eng Sci 2011, 51:1617-1625.
32. Ishikawa T., Taki K., Ohshima M. Polym Eng Sci 2012, 52:875-883.
33. Bledzki A., Kuhn J., Kirschling H., Pitscheneder W. Cell Polym 2008, 27:91-100.
34. ASTM D790-03. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials, ASTM International, PA, USA; 2003.
35. ASTM D256-97 standard test methods for determining the izod pendulum impact resistance of plastics, ASTM International, PA, USA; 2000.
36. Collias D.I., Baird D.G. Polym Eng Sci 1995, 35:1167-1177.
37. Collias D.I., Baird D.G. Polym Eng Sci 1995, 35:1178-1183.
38. Antunes M., Velasco J.I., Solorzano E., Rodriguez-Perez M.A. Heat transfer in multi-phase materials 2011, Springer, London.
39. Nofar M., Zhu W., Park C.B. Polymer 2012, 53:3341-3353.
40. Nofar M., Tabatabaei A., Park C.B. Polymer 2013, 54:2382-2391.
41. Zhai W.T., Kuboki T., Wang L., Park C.B., Lee E.K., Naguib H.E. Ind Eng Chem Res 2010, 49:9834-9845.
42. Nofar M., Zhu W., Park C.B., Randall J. Ind Eng Chem Res 2011, 50:13789-13798.
43. Taki K., Kitano D., Ohshima M. Ind Eng Chem Res 2011, 50:3247-3252.
44. Leung S.N., Wong A., Guo Q., Park C.B., Zong J.H. Chem Eng Sci 2009, 64:4899-4907.
45. Matuana L.M., Park C.B., Balatinecz J.J. Polym Eng Sci 1997, 37:1137-1147.
46. Baldwin D.F., Suh N.P. SPE ANTEC Tech Papers 1992, 38:1503.
47. Jahani D., Ameli A., Jung P.U., Barzegari M.R., Park C.B., Naguib H. Mater Des 2014, 53:20-28.
48. Perego G., Cella G.D., Bastioli C. J Appl Polym Sci 1996, 59:37-43.
49. Yu L., Liu H., Xie F., Chen L., Li X. Polym Eng Sci 2008, 48:634-641.
50. Rachtanapun P., Selke S.E.M., Matuana L.M. Polym Eng Sci 2004, 44:1551-1560.
51. Shimbo M., Higashitani I., Miyano Y. J Cell Plast 2007, 43:157-167.
52. Michaeli W, Florez L. 11th Blowing Agents and Foaming Processes, Hamburg, Germany, May 2009.
53. Matuana L.M., Park C.B., Balatinecz J.J. Polym Eng Sci 1998, 38:1862-1872.
54. Antunes M., Realinho V., Solórzano E., Rodríguez-Pérez M.A., de Saja J.A., Velasco J.I. Defect Diff Forum 2010, 297-301:996-1001.
55. Hrubesh L.W., Pekala R.W. J Mater Res 1994, 9:731-738.
56. Schmidt D., Raman V.I., Egger C., Fresne C.D., Schädler V. Mater Sci Eng C 2007, 27:1487-1490.