Reconfigurable distributed control

Reconfigurable Distributed Control

Volumn , Issue , 2005, Pages 1-138

  Benítez Pérez, Héctor ^a   García Nocetti, Fabián ^a  

^a UNIVERSIDAD NACIONAL AUTÓNOMA DE MÉXICO   (Mexico)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84887986051     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/1-84628-196-2     Document Type: Book

References (139)

1. Admire, http://www.ffa.se/admire, 2003.
2. Agre J., and Clare, L.; "An Integrated Architecture for Cooperative Sensing Networks"; IEEE Computer, 1999.
3. Akbaryan F., and Bishnoi P.; "Fault Diagnosis of Multivariate Systems Using Pattern Recognition and Multisensor Data Analysis Technique"; Computers and Chemical Engineering, Vol. 25, pp. 1313-1339, 2001.
4. Almeida L., Pedreiras P., and Fonseca J. A.; "The FTT-CAN Protocol: Why and How"; IEEE Transactions on Industrial Electronics, Vol. 49, No. 6, pp. 1189-1201, 2002.
5. Almeida, L., Pasadas, R., and Fonseca, J. A.; "Using a Planning Scheduler to Improve the Flexibility of Real-Time Fieldbus Networks"; Control Engineering Practice, Vol. 7, pp. 101-108, 1999.
6. Altisen, K., Gossler, G., and Sifakis, J.; "Scheduler Modeling Based on the Controller Paradigm"; Real-Time Systems, Vol. 23, No. 1-2, pp. 55-84, 2002.
7. th Triennial World Congress, Spain, 2002.
8. Arinc, S., 629-2; "ARINC Multitransmitter Databus Part 1: Technical Description"; Published by Aeronautical Radio Inc., USA, 1991.
9. Arzen, K., Bernhardsson, B., Eker, J., Cervin, A., Persson, P., Nilsson, K., and Sha, L.; "Integrated Control and Scheduling"; Department of Automatic Control Lund Institute of Technology, ISSN 0280-5316, August 1999.
10. Auslander, D. M.; "What is Mechatronics?"; IEEE/ASME Transactions Mechatronics, Vol. 1, No. 1, pp. 54-66, 1996.
11. Avionics, Communications; "Principles of Avionics Databuses"; Editorial Staff of Avionics Communications, USA, 1995.
12. Ballé, P., Fischer, M., Füssel, D., Nelles, O., and Isermann, R.; "Integrated Control Diagnosis and Reconfiguration of a Heat Exchanger"; IEEE Control Systems Magazine, Vol. 18, No. 3, 1998.
13. Beilharz, J., and Filbert, D.; "Using the Functionality of PWM Inverters for Fault Diagnosis of Induction Motors"; IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes SAFEPROCESS'97, Vol. I, pp. 246-251, 1997.
14. Benchaib, A. H., and Rachid, A.; "Sliding Mode Flux Observer for an Induction Motor with Rotor Resistance Adaptation"; IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes SAFEPROCESS'97, Hull, UK, Vol. 1, pp. 258-263, 1997.
15. Benítez-Pérez, H.; "Smart Distributed Systems"; PhD. Thesis, Department of Automatic Control and System Engineering, University of Sheffield, UK, 1999.
16. Benítez-Pérez, H., Hargrave, S., Thompson, H., and Fleming, P.; "Application of Parameters Estimation Techniques to a Smart Fuel Metering Unit"; IFAC Symposium on Fault Detection Supervision and Safety for Technical Processes, SAFEPROCESS, pp. 1092-1097, 2000.
17. th IFAC Workshop on Online Fault Detection and Supervision in the Chemical Process Industries, pp. 317-321, 2001.
18. Benítez-Pérez, H., Thompson, H., and Fleming, P.; "Implementation of a Smart Sensor using Analytical Redundancy Techniques"; IFAC Symposium on Fault Detection Supervision and Safety for Technical Processes, SAFEPROCESS, Vol. 1, pp. 498-503, 1997.
19. Benítez-Pérez, H., and García-Nocetti, F.; "Reconfigurable Distributed Control using Smart Peripheral Elements", Control Engineering Practice, Vol. 11, pp. 975-988, 2003.
20. Blanke, M., Kinnaert, M., Lunze, J., and Staroswiecki, M.; "Diagnosis and Fault Tolerant Control"; Springer, 2003.
21. Blanke, M., Nielsen, S., and Jorgensen, R.; "Fault Accommodation in Feedback Control Systems"; Lecture Notes in Computer Science, Hybrid Systems, Sringer-Verlag, No. 376, pp. 393-425, 1993.
22. Blanke, M., Nielsen, S., Jorgensen, R., and Patton, R. J.; "Fault Detection and Accommodation for a Diesel Engine Actuator - a Benchmark"; IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, SAFEPROCESS'94, Finland, pp. 498-506, 1994.
23. Bodson, M., and Groszkiewicz J. E.; "Multivariable Adaptive Algorithms for Reconfigurable Flight Control"; IEEE Transactions on Control Systems Technology, Vol. 5, No. 2, 217-229, 1997.
24. Brandt, S., and Nutt, G.; "Flexible Soft Real-Time Processing in Middleware"; Real-Time Systems, Kluwer Academic Publishers, No. 22, pp. 77-118, 2002.
25. Brasileiro, F. V., Ezhilchelvan, P. D., Shrivastava, S. K., Speirs, N. A., and Tao, S.; "Implementing Fail-silent Nodes for Distributed Systems"; IEEE Transactions on Computers, Vol. 45, No. 11, pp. 1226-1238, 1996.
26. Browne, A.; "Automating the Development of Real-time Control Systems Software"; PhD. Thesis, Department of Automatic Control and Systems Engineering, University of Sheffield, UK, 1996.
27. Buttazzo, G.; "Hard Real-Time Computing Systems"; Kluwer Academic Publishers, 2004.
28. Camacho, E., and Bordons, C.; "Model Predictive Control"; Springer-Verlag, 1999.
29. Campbell S., and Nikoukhah, R.; "Auxiliary Signal Design for Failure Detection"; Princeton Series in Applied Mathematics, 2004.
30. Caughey, S. J., and Shrivastava, S. K.; "Architectural Support for Mobile Objects in Large Scale Distributed Systems"; Proc. 4th IEEE Int. Workshop on Object-Orientation in Operating Systems (IWOOS), pp. 38-47, Lund, Sweden, 1995.
31. Cervin, A., Henriksson, D., Lincoln, B., Eker, J., and Arzén, K.; "How Does Control Timing Affect Performance?"; IEEE Control Systems Magazine, Vol. 23, pp. 16-30, 2003.
32. Chandler, P., "System Identification for Adaptive and Reconfigurable Control"; Journal of Guidance, Control and Dynamics, Vol. 18, No. 3, pp. 516-524, 1995.
33. Chen, J., and Patton, R.; "Robust Model-Based Fault Diagnosis for Dynamic Systems"; Kluwer Academic Press, 1999.
34. Cheng A.; "Real-Time Systems: Scheduling, Analysis and Verification"; Wiley-Interscience, 2002.
35. Chiang, L., Russell, E., and Braatz, R.; "Fault Detection and Diagnosis in Industrial Systems"; Springer-Verlag, Great Britain, 2001.
36. Clarke, D., Mohtadi, C., and Tuffs P.; "Generalized Predictive Control Part I. The Basic Algorithm"; Automatica, Vol. 23, No. 2, pp. 137-148, 1987a.
37. Clarke, D., Mohtadi, C., and Tuffs P.; "Generalized Predictive Control Part II. Extensions and Interpretations"; Automatica, Vol. 23, No. 2, pp. 149-160, 1987b.
38. Clarke, D., Mohtadi, C., and Tuffs P.; "Properties of Generalized Predictive Control"; Automatica, Vol. 25, No. 6, pp. 859-875, 1989.
39. Coulouris, G., Dollimore, J., and Kindberg, T.; "Distributed Systems"; Addison Wesley, 1994.
40. Devillers, R., and Goossens, J.; "Liu and Layland́s Schedulability Test Revisited"; Information Processing Letters, Vol. 73, pp. 157-161, 2000.
41. Driankov, D., Hellendoorn, H., and Reinfrank, M.; "An Introduction to Fuzzy Control"; Springer-Verlag, 1993.
42. Ferree, S. R.; "Sensors-Simple to Smart to System"; International Journal of Instrumentation and Control (INTECH), Vol. 38, No. 11, pp. 24-25, 1991.
43. Flexicon, http://www.control.lth.se/FLEXCON/, 2003.
44. Frank, T., Kraiss, K. F., and Kuhlen, T; "Comparative Analysis of Fuzzy ART and ART-2A Network Clustering Performance"; IEEE Transactions on Neural Networks, Vol. 9, No. 3, May 1998.
45. Freer, J.; "Computer Communication Networks"; Addison-Wesley, 1989.
46. Gertler, J. and Kunwer, M.; "Optimal Residual Decoupling for Robust Fault Diagnosis"; International Journal of Control, Vol. 62, No. 2, pp. 395-421, 1995.
47. Gertler, J.; "Fault Detection and Diagnosis in Engineering Systems"; Marcel Dekker, 1998.
48. Gill, C., Levine, D., and Schmidt, D.; "The Design and Performance of a Real-Time CORBA Scheduling Service"; Real-Time Systems, Kluwer Academic Publishers, No. 21, pp. 117-154, 2001.
49. Gudmundsson, D., and Goldberg, K.; "Tuning Robotic Part Feeder Parameters to Maximize Throughput"; Assembly Automation Publisher: MCB University Press, Vol. 19, No. 3, pp. 216-221, 1999.
50. Halevi, Y., and Ray, A.; "Integrated Communication and Control Systems; Part I-Analysis"; Journal of Dynamic Systems, Measurement and Control, Vol. 110, pp. 367-373, 1988.
51. Hassoum, H.; "Fundamentals of Artificial Neural Networks"; Massachusetts Institute of Technology, 1995.
52. Hong, P., Kim, Y., Kim, D., and Kwon, W.; "A Scheduling Method for Network-Based Control Systems"; IEEE Transactions on Control Systems Technology, Vol. 10, No. 3, pp. 318-330, 2002.
53. Hong, S. H.; "Scheduling Algorithm of Data Sampling Times in the Integrated Communication and Control Systems"; IEEE Transactions Control Systems Technology, Vol. 3, pp. 225-231, 1995.
54. Höppner, F., Klawonn, F., Kruse, R., and Funkler, T.; "Fuzzy Cluster Analysis"; John Wiley and Sons, 2000.
55. IEEE, TAC; "Special Issue on Networked Control Systems"; IEEE Transactions on Automatic Control, Vol. 49, No. 9, 2004.
56. Isermann, R., and Raab, U.; "Intelligent actuators-ways to autonomous actuating systems"; Automatica, Vol. 29, No. 5, pp. 1315-1332, 1993.
57. Jämsä-Jounela, S., Vermasvouri, M., Endén, P., and Haavisto, S.; "A Process Monitoring System-Based on the Kohonen Self-Organizing Maps"; Control Engineering Practice, Vol. 11, pp. 83-92, 2003.
58. Janseen, K., and Frank, P. M.; "Component Failure Detection Via State Estimation"; Pre-prints IFAC 9th World Congress, Budapest, Hungary, Vol. 1, pp. 147-152, 1984.
59. Jitterbug, http://www.control.lth.se/~lincoln/jitterbug/, 2003.
60. Johannessen, S.; "Time Synchronization in a Local Area Network"; IEEE Control Systems Magazine, Vol. 24, No. 2, pp. 61-69, 2004.
61. Johnson, B.; "Design and Analysis of Fault Tolerant Digital Systems"; Addison Wesley, 1989.
62. Jolliffe, I. T.; "Principal Component Analysis"; Springer-Verlag, 2002.
63. th Trienial World Congress, 2002.
64. Klir, G., and Yuan, B.; "Fuzzy Sets and Fuzzy Logic"; Prentice-Hall, 1995.
65. Koenig, D., Nowakowski, S. and Cecchin, T.; "An Original Approach for Actuator and Component Fault Detection and Isolation"; IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes SAFEPROCESS'97, Hull, UK, Vol. 1, pp. 95-105, 1997.
66. Kohonen, T.; "Self-Organization and Associative Memory"; Springer-Verlag, Berlin, Germany, 1989.
67. Kopetz, H., and Oschenreiter, W.; "Clock Synchronization in Distributed Real-Time Systems"; IEEE Transactions Computers, Vol. 36, No. 8, pp. 930-940, 1987.
68. Kopetz, H.; "A Solution to an Automotive Control System Benchmark"; Proceedings Real-Time Systems Symposium IEEE, Computer Society Press, California, USA, Vol. x+299; pp. 154-158, 1994.
69. Kopetz, H.; "Real-Time Systems"; Kluwer Academic Publishers, 1997.
70. Koppenhoefer, S., and Decotignie, J.; "Formal Verification for Distributed Real-Time Control Periodic Producer/Consumer"; IEEE Conference on Engineering of Complex Computer Systems, pp. 230-238, 1996.
71. Krishna C., and Shin K.; "Real-Time Systems"; Mc Graw Hill, 1997.
72. Krtolica, R., Ozgüner, Ü, Chan, H., Göktas, H., Winkelman, J., and Liubakka, M.; "Stability Linear Feedback Systems with Random Communications Delays"; International Journal of Control, Vol. 59, No. 4, pp. 925-953, 1994.
73. Krueger, C. W.; "Software Reuse"; ACM Computing Survey, Vol. 24, No. 2, pp. 131-183, June 1992.
74. Kubota, H., Matsuse, K., and Nakano, T.; "DSP-Based Speed Adaptive Flux Observer of Induction Motor"; IEEE Transactions on Industrial Applications, Vol. 29, No. 2, pp. 344-348, 1993.
75. Lapeyre, F., Habmelouk, N., Zolghadri, A., and Monsion, M.; "Fault Detection in Induction Motors via Parameter Estimation Techniques"; IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes SAFEPROCESS'97, Hull, UK, Vol. 1, pp. 270-275, 1997.
76. Lawrenz, W.; "CAN Systems Engineering from Theory to Practical Applications"; Springer-Verlag, 1997.
77. Lee, D., Thompson, H. A., and Bennett, S.; "PID Control for a Distributed System with a Smart Actuator"; Digital Control: Past, Present and Future of PID Control (PID'00). Proceedings Volume from the IFAC Workshop, pp. 499-504, 2000.
78. Lee, K., Lee, S., and Lee, M.; "Remote Fuzzy Logic Control of Networked Control System via Profibus-DP"; IEEE Transactions on Industrial Electronics, Vol. 50, No. 4, pp. 784-792, 2003.
79. Lian, F., Moyne J., and Tilbury, D.; "Network Design for Distributed Control Systems"; IEEE Transactions on Control Systems Technology, Vol. 10, No. 2, pp. 297-307, 2002.
80. th IEEE Conference on Decision and Control, Vol. 2, pp. 1319-1324, 2002.
81. Linkens, M., and Nie, J.; "Learning Control using Fuzzified Self Organizing Radial Basis Functions Networks"; IEEE Transactions on Fuzzy Systems, No. 4, pp. 280-287, 1993.
82. Liou, L., and Ray A.; "A Stochastic Regulator for Integrated Communication and Control Systems: Part I-Formulation of Control Law"; Journal of Dynamic Systems, Measurement, and Control, Vol. 113, pp. 604-611, 1991.
83. Liu, C. L., and Layland, J. W.; "Scheduling Algorithms for Multiprogramming in a Hard Real-Time Environment"; Journal of Association of Computing Machinery, Vol. 20, pp. 46-61, 1973.
84. Liu, J.; "Real-Time Systems"; Prentice Hall, 2000.
85. Livani, M. A., and Kaiser, J.; "EDF Consensus on CAN Bus Access for Dynamic Real-time Applications"; Lecture Notes in Computer Science, Springer Verlag, Berlin, Edited by Frantisek Plasil and Keith G. Jeffery, Vol. 1388, pp. 1088-1097, 1998.
86. Livani, M. A., Kaiser, J., and Jia, W. J.; "Scheduling Hard and Soft Real-Time Communication in the Controller Area Network (CAN) "; IFAC Workshop on Real-Time Programming, pp. 13-18, 1998.
87. Ljung, L.; "Asymptotic Behavior of the Extended Kalman Filter as a Parameter Estimator for Linear Systems"; IEEE Transactions in Automatic Control, Vol. AC-24, No. 1, pp. 36-50, 1979.
88. Lönn H.; "Synchronization and Communication Results in Safety Critical Real-Time Systems"; PhD. Thesis, Department of Computer Engineering, Chalmers, University of Technology, Sweden, 1999.
89. Mahmoud, M., Jiang, J., and Zhang, Y.; "Active Fault Tolerance Control Strategies"; Lectures Notes in Control and Information Science, Springer, 2003.
90. Malmborg J.; "Analysis and Design of Hybrid Control Systems"; PhD. Thesis, Department of Automatic Control, Lund Institute of Technology, Sweden, 1998.
91. th IFAC Symposium SAFEPROCESS, Vol. 1, pp. 65-76, 2000.
92. Masten, M.; "Electronics: The Intelligence on Intelligent Control"; IFAC Symposium on Intelligent Component and Instrument for Control Applications, pp. 1-11, 1997.
93. Mediavilla, M., and Pastora-Vega, L.; "Isolation of Multiplicative Faults in the Industrial Actuator Benchmark"; IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes SAFEPROCESS'97, Hull, UK, Vol. 2, pp. 855-860, 1997.
94. Merrill, W. C.; "Sensor Failure Detection for Jet Engines Using Analytical Redundancy"; Journal of Dynamic Systems, Measurement and Control, Vol. 8, No. 6, pp. 673-682, 1985.
95. Misra, M., Yue, H., Qin, S., and Ling, C.; "Multivariable Process Monitoring and Fault Diagnosis by Multi-Case PCA"; Computers and Chemical Engineering, Vol. 26, pp. 1281-1293, 2002.
96. Mitra, S., and Pal, K.; "Neuro-Fuzzy Pattern Recognition"; Wiley Series, 1999.
97. Monfared, M. A. S., and Steiner, S. J.; "Fuzzy Adaptive Scheduling and Control Systems"; Fuzzy Sets and Systems, No. 115, pp. 231.246, 2000.
98. Moya, E., Sainz, G., Grande, B., Fuente, M., and Peran, J.; "Neural PCA Based Fault Diagnosis"; Proceeding of the European Control Conference, pp. 809-813, 2001.
99. Nara, K, Mishima, Y., and Satoh, T.; "Network Reconfiguration for Loss Minimization and Load Balancing"; IEEE Power Engineering Society General Meeting, Vol. 4, pp. 2413-2418, 2003.
100. Nelles, O.; "Non-Linear Systems Identification"; Springer-Verlag, 2001.
101. Nikolakopoulos, G., and Tzes, A.; "Reconfigurable Internal Model Control Based on Adaptive Lattice Filtering"; Mathematics and Computers in Simulation, Vol. 20, pp. 303-314, 2002.
102. Nilsson, J.; "Real-Time Control Systems with Delays"; PhD. Thesise, Department of Automatic Control, Lund Institute of Technology, Sweden, 1998.
103. Oehler, R., Schoenhoff, A., and Schreiber, M.; "On-Line Model-Based Fault Detection and Diagnosis for a Smart Aircraft Actuator"; IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes SAFEPROCESS'97, Hull, UK, Vol. 2, pp. 591-596, 1997.
104. Olbrich, T., and Richardson, A.; "Integrated Test Support for Intelligent Sensors"; IEE Colloquium on Intelligent Systems at the University of Leicester, Reference number 1996/261, pp. 1/1-1/7, UK, 1996a.
105. Olbrich, T., Bradley, P. A., and Richardson, A. M.; "BIST for Microsystems as a Contributor to System Quality and Engineering"; Special Issue on Quality Effort in Europe, Vol. 8, No. 4, pp. 601-613, 1996b.
106. Park, B., Kargupta, H., Johnson, E., Sanseverino, E., Hershberger, D., Silvestre, L.; "Distributed Collaborative Data Analysis from Heterogeneous Sites Using a Scalable Evolutionary Technique"; Applied Intelligence, Vol. 16, No. 1, pp. 19-42, 2002.
107. Patton, R., Frank, P., and Clark, R.; "Issues of Fault Diagnosis for Dynamic Systems"; Springer, 2000.
108. Quevedo, D., Goodwin, C., and Welsh, J.; "Design Issues Arising in a Networked Control System Architecture"; Proceedings of the 2004 IEEE International Conference on Control Applications, Vol. 1, pp. 450-455, 2004.
109. Raab, U., and Isermann, R.; "Lower Power Actuator Principles"; VDI/VDE-Tagung, Actuator 90, Bremen, 1990.
110. Rauch, H.; "Autonomous Control Reconfiguration"; IEEE Control Systems Magazine, pp. 34-47, 1995.
111. Ray, A., and Halevi, Y.; "Integrated Communication and Control Systems: Part II-Design Considerations"; Journal of Dynamic Systems, Measurement and Control, Vol. 110, pp. 374-381, 1988.
112. Reza, S.; "Smart Networks for Control"; IEEE, 1994.
113. Sanz, R., Alonso, M., Lopez, I., and García, C.; "Enhancing Control Architectures using CORBA"; Proceedings of the 2001 IEEE International Symposium on Intelligent Control, pp. 189-194, 2001.
114. Sanz, R., and Zalewski J.; "Pattern Based Control Systems Engineering"; IEEE Control Systems Magazine, Vol. 23, No. 3, pp. 43-60, 2003.
115. Schneider, F.; "Implementing Fault Tolerance Services Using the State Machine Approach: A Tutorial"; ACM Computing Services, Vol. 22, No. 4, pp. 299-319, Dec. 1990.
116. Seto, D., Lehoczky, J. P., Sha, L., and Shin, K. G.; "Trade-Off Analysis of Real-Time Control Performance and Schedulability"; Real-Time Systems, Kluwer Academic Publishers, No. 21, pp. 199-217, 2001.
117. Sloman, M., and Kramer, J.; "Distributed Systems and Computer Networks"; Prentice-Hall, 1987.
118. Tanenbaum, S.; "Computer Networks"; Prenice Hall, 2003.
119. Tindell, K., and Clark, J.; "Holistic Schedulability Analysis for Distributed Hard Real-Time Systems"; Microprocessing and Microprogramming, Vol. 40, pp. 117-134, 1994.
120. Tontini, G., and De Queiroz, A.; "RBF Fuzzy ARTMAP: A New Fuzzy Neural Network for Robust Online Learning and Identification of Patterns"; IEEE International Conference on Systems Man and Cybernetics, Information Intelligence and Systems, Vol. 2, pp. 1364-1369, 1996.
121. Törngren, M., and Redell, O.; "A Modelling Framework to Support the Design and Analysis of Distributed Real-Time Control Systems"; Microprocessors and Microsystems, Vol. 24, pp. 81-93, 2000.
122. Törngren, M.; "Fundamentals of Implementing Real-Time Control Applications in Distributed Computer Systems"; Real-Time Systems, Kluwer Academic Publishers, Vol. 14, No. 3, pp. 219-250, 1998.
123. True Time, http://www.control.lth.se/~dan/truetime/, 2003.
124. Venkatasubramanian, V., Rengaswamy, R., Kavuri, S., and Yin, K.; "A Review of Process Fault Detection and Diagnosis. Part I: Quantitative Model-based Methods"; Computers and Chemical Engineering, Vol. 27, pp. 293-311, 2003a.
125. Venkatasubramanian, V., Rengaswamy, R., Kavuri, S., and Yin, K.; "A Review of Process Fault Detection and Diagnosis. Part II: Qualitative Models and Search Strategies"; Computers and Chemical Engineering, Vol. 27, pp. 313-326, 2003b.
126. Venkatasubramanian, V., Rengaswamy, R., Kavuri, S., and Yin, K.; "A Review of Process Fault Detection and Diagnosis. Part III: Process History Based Methods"; Computers and Chemical Engineering, Vol. 27, pp. 327-346, 2003c.
127. Vinoski, S.; "CORBA: Integrating Diverse Applications within Distributed Heterogeneous Environments"; IEEE Communication Magazine, Vol. 35, pp. 46-55, 1997.
128. Walsh, G. C., Ye, H., and Bushnell, L. G.; "Stability Analysis of Networked Control Systems"; IEEE Transactions on Control Systems Technology, Vol. 10, No. 3, pp. 438-446, 2002.
129. Werbos, P.; "Backpropagation Through Time: What it Does and How to Do It"; Proceedings of the IEEE, Vol. 78, pp. 1550-1560, 1990.
130. Willis, H., Tram, H., Engel, M., and Finley, L.; "Selecting and Applying Distribution Optimization Methods"; IEEE Computer Applications in Power, Vol. 9, No. 1, pp. 12-17, 1996.
131. Wills, L., Kannan, S., Sander, S., Guler, M., Heck, B., Prasad, J., Schrage, D., and Vachtsevanous, G.; "An Open Plataform for Reconfigurable Control"; IEEE Control Systems Magazine, Vol. 21, No. 3, pp. 49-64, 2001.
132. th IEEE Conference on Decision & Control, WA10, pp. 283-288, 1998.
133. Xu, Z., and Zhao, Q.; "Design of Fault Detection and Isolation Via Wavelet Analysis and Neural Networks"; Proceedings of the IEEE International Symposium on Intelligent Control, pp. 467-472, 2002.
134. Yang, B., Han, T., and Kim, Y.; "Integration of ART-Kohonen Neural and Case Based Reasoning for Intelligent Fault Diagnosis"; Expert Systems with Applications, Vol. 26, pp. 387-395, 2004.
135. Yang, C. Y., and Clarke, D. W.; "A Self-Validating Thermocouple"; IEEE Transactions on Control Systems Technology, Vol. 5, No. 2, pp. 239-253, 1997.
136. Yang, Z., and Blanke, M.; "A Unified Approach for Controllability Analysis of Hybrid Control Systems"; Proceedings of IFAC CSD2000, pp. 158-163, 2000.
137. th IFAC Triennial World Congress, 2002.
138. Yook, J. K., Tilbury, D. M., and Soparkar, N. R.; "Trading Computation for Bandwidth: Reducing Communication in Distributed Control Systems using State Estimators"; IEEE Transactions on Control Systems Technology, Vol. 10, No. 4, pp. 503-518, 2002.
139. Yu, W., and Pineda, J.; "Chemical Process Modeling with Multiple Neural Networks"; European Control Conference, Porto, Portugal, pp. 3735-3740, 2001.