Renewable polyurethane microcapsules with isosorbide derivatives for self-healing anticorrosion coatings

Industrial and Engineering Chemistry Research

Volumn 52, Issue 44, 2013, Pages 15541-15548

  Koh, Eunjoo ^a   Lee, Sangjun ^a,b   Shin, Jihoon ^a   Kim, Young Wun ^a,b  

^a Korea Research Institute of Chemical Technology   (South Korea)

^b University of Science and Technology (UST)   (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

ANTI-CORROSION COATING; CORROSION CONTROL; INTERFACIAL POLYMERIZATION; RING OPENING REACTION; SALT SPRAY TEST; SUCCINIC ANHYDRIDE; ULTRA-SONICATION; WASTE VEGETABLE OIL;

CORROSION PROTECTION; CORROSION RESISTANCE; POLYURETHANES; REPAIR;

COATINGS;

EID: 84887569454     PISSN: 08885885     EISSN: 15205045     Source Type: Journal    
DOI: 10.1021/ie402505s     Document Type: Conference Paper

References (37)

1. Kalendová, A.; Veselý, D.; Sapurina, I.; Stejskal, J. Anticorrosion efficiency of organic coatings depending on the pigment volume concentration of polyaniline phosphate Prog. Org. Coat. 2008, 63, 228
2. Morcillo, M.; Chico, B.; Mariaca, L.; Otero, E. Salinity in marine atmospheric corrosion: its dependence on the wind regime existing in the site Corros. Sci. 2000, 42, 91
3. Shchukin, D. G.; Zheludkevich, M.; Yasakau, K.; Lamaka, S.; Ferreira, M. G. S.; Möhwald, H. Layer-by-Layer Assembled Nanocontainers for Self-Healing Corrosion Protection Adv. Mater. 2006, 18, 1672
4. Tan, C. K.; Blackwood, D. J. Corrosion protection by multilayered conducting polymer coatings Corros. Sci. 2003, 45, 545
5. Zheludkevich, M. L.; Yasakau, K. A.; Bastos, A. C.; Karavai, O. V.; Ferreira, M. G. S. On the application of electrochemical impedance spectroscopy to study the self-healing properties of protective coatings Electrochem. Commun. 2007, 9, 2622
6. Motte, C.; Maury, N.; Olivier, M.-G.; Petitjean, J.-P.; Willem, J.-F. Cerium treatments for temporary protection of electroplated steel Surf. Coat. Technol. 2005, 200, 2366
7. Brown, E. N.; White, S. R.; Sottos, N. R. Microcapsule induced toughening in a self-healing polymer composite J. Mater. Sci. 2004, 39, 1703
8. Kessler, M. R.; Sottos, N. R.; White, S. R. Self-healing structural composite materials Composites, Part A 2003, 34, 743
9. Hager, M. D.; Greil, P.; Leyens, C.; Zwaag, S. van der; Schubert, U. S. Self-Healing Materials Adv. Mater. 2010, 22, 5424
10. Yuan, Y. C.; Rong, M. Z.; Zhang, M. Q.; Chen, J.; Yang, G. C.; Li, X. M. Self-Healig Polymeric Materials Using Epoxy/Mercaptan as the Healant Macromolecules 2008, 41, 5197
11. Porter, R.; Miale, J. B. Extended Control of Marine Fouling Appl. Biochem. Biotechnol. 1984, 9, 439
12. Kuang, F.; Shi, T.; Wang, J.; Jia, F. Microencapsulation technology for thiourea corrosion inhibitor J. Solid State Electrochem. 2009, 13, 1729
13. Yeom, C. K.; Oh, S. B.; Rhim, J. W.; Lee, J. M. Microencapsulation of Water-Soluble Herbicide by Interfacial Reaction. I. Characterization of Microencapsulation J. Appl. Polym. Sci. 2000, 78, 1645
14. Yamaguchi, M.; Ono, S.; Okamoto, K. Interdiffusion of dangling chains in weak gel and its application to self-repairing material Mater. Sci. Eng., B 2009, 162, 189
15. García, S. J.; Fischer, H. R.; Zwaag, S. van der. A critical appraisal of the potential of self healing polymeric coatings Prog. Org. Coat. 2011, 72, 211
16. Scher, H. B.; Rodson, M.; Lee, K.-S. Microencapsulation of Pesticides by Interfacial Polymerization Utilizing Isocyanate or Aminoplast Chemistry Pestic. Sci. 1998, 54, 394
17. Yang, J.; Keller, M. W.; Moore, J. S.; White, S. R.; Sottos, N. R. Microencapsulation of Isocyanates for Self-Healing Polymers Macromolecules 2008, 41, 9650
18. Yan, C.; Resau, J. H.; Hewetson, J.; West, M.; Rill, W. L.; Kende, M. Characterization and morphological analysis of protein-loaded poly(lactide-co-glycolide) microparticles prepared by water-in-oil-in-water emulsion technique J. Controlled Release 1994, 32, 231
19. Jafari, S. M.; He, Y.; Bhandari, B. Production of sub-micro emulsions by ultrasound and microfluidization techniques J. Food Eng. 2007, 82, 478
20. Bachtsi, A. R.; Kiparissides, C. Synthesis and release studies of oil-containing poly(vinyl alcohol) microcapsules prepared by coacervation J. Controlled Release 1996, 38, 49
21. Hong, K.; Park, S. Preparation of polyurea microcapsules with different composition ratios: Structures and thermal properties Mater. Sci. Eng., A 1999, 272, 418
22. Tatiya, P. D.; Hedaoo, R. K.; Mahulikar, P. P.; Gite, V. V. Novel Polyurea Microcapsules Using Dendritic Functional Monomer: Synthesis, Characterization, and Its Use in Self-healing and Anticorrosive Polyurethane Coatings Ind. Eng. Chem. Res. 2013, 52, 1562
23. Hojabri, L.; Kong, X.; Narine, S. S. Functional Thermoplastics from Linear Diols and Diisocyanates Produced Entirely from Renewable Lipid Sources Biomacromolecules 2010, 11, 911
24. Hu, Y. H.; Gao, Y.; Wang, D. N.; Hu, C. P.; Zu, S.; Vanoverloop, L.; Randall, D. Rigid Polyurethane Foam Prepared from a Rape Seed Oil Based Polyol J. Appl. Polym. Sci. 2002, 84, 591
25. Sharma, V.; Kundu, P. P. Condensation polymers from natural oils Prog. Polym. Sci. 2008, 33, 1199
26. Hill, K. Fats and oils as oleochemical raw materials Pure Appl. Chem. 2000, 72, 1255
27. Hablot, E.; Matadi, R.; Ahzi, S.; Vaudemond, R.; Ruch, D.; Avérous, L. Yield behaviour of renewable biocomposites of dimer fatty acid-based polyamides with cellulose fibres Compos. Sci. Technol. 2010, 70, 525
28. Lu, Y.; Larock, R. C. Soybean-Oil-Based Waterborne Polyurethane Dispersions: Effects of Polyol Functionality and Hard Segment Content on Properties Biomacromolecules 2008, 9, 3332
29. Li, W.; Wang, J.; Wang, X.; Wu, S.; Zhang, X. Effects of ammonium chloride and heat treatment on residual formaldehyde contents of melamine-formaldehyde microcapsules Colloid Polym. Sci. 2007, 285, 1691
30. Liu, X.; Zhang, H.; Wang, J.; Wang, Z.; Wang, S. Preparation of epoxy microcapsule based self-healing coatings and their behavior Surf. Coat. Technol. 2012, 206, 4976
31. Yoo, S. H.; Kim, Y. W.; Chung, K. W.; Baik, S. Y.; Kim, J. S. Synthesis and corrosion inhibition behavior of imidazoline derivatives based on vegetable oil Corros. Sci. 2012, 59, 42
32. Baek, S-Y.; Kim, Y-W.; Chung, K.; Yoo, S-H.; Kim, N. K.; Kim, Y-J. Synthesis of Succinic Acid Alkyl Half-Ester Derivatives with Improved Lubricity Characteristics Ind. Eng. Chem Res. 2012, 51, 3564
33. Wu, Q.; Yoshino, T.; Sakabe, H.; Zhang, H.; Isobe, S. Chemical modification of zein by bifunctional polycaprolactone (PCL) Polymer 2003, 44, 3909
34. Kweon, D.-K.; Cha, D.-S.; Park, H.-J.; Lim, S.-T. Starch- g -Polycaprolactone Copolymerization Using Diisocyanate Intermediates and Thermal Characteristics of the Copolymers J. Appl. Polym. Sci. 2000, 78, 986
35. ASTM. ASTM C 1624-05. Standard test method for adhesion strength and mechanical failure modes of ceramic coatings by quantitative single point scratch testing. In Annual book of ASTM standard. American Society for Testing and Materials, International: West Conshohocken, PA, 2005.
36. ASTM. ASTM B 117-73. Standard method of salt spray (fog) testing. In Annual book of ASTM standard. American Society for Testing and Materials, International: West Conshohocken, PA, 1973.
37. ASTM. ASTM D 610-08. Standard test method for evaluating degree of rusting on painted steel surfaces. In Annual book of ASTM standard. American Society for Testing and Materials, International: West Conshohocken, PA, 2008.