Vibration signature analysis for rotor broken bar diagnosis in double cage induction motor drives

International Conference on Power Engineering, Energy and Electrical Drives

Volumn , Issue , 2013, Pages 1814-1820

  Gritli, Y ^a,b,e,f   Di Tommaso, A O ^c,d   Miceli, R ^c,d   Filippetti, F ^a,b   Rossi, C ^d  

^a UNIVERSITY OF BOLOGNA   (Italy)

^b Dipartimento di Ingegneria dell'Energia Elettrica e dell'Informazione Guglielmo Marconi   (Italy)

^c UNIVERSITY OF PALERMO   (Italy)

^d Dept of Elec Electron and Telecommunication Eng ^*

^e UNIVERSITY OF TUNIS EL MANAR   (Tunisia)

^f UNIVERSITY OF TUNIS EL MANAR   (Tunisia)

Author keywords

AC Machine; Condition monitoring; Double cage rotor; Fault diagnostics; Induction motor drives; Wavelet Transform

Indexed keywords

AC MACHINE; BROKEN BAR DIAGNOSIS; CAGE INDUCTION MOTORS; DOUBLE-CAGE ROTORS; FAULT DIAGNOSTICS; INDUCTION MOTOR DRIVE; ROTOR FAULT DETECTION; VIBRATION SIGNATURE ANALYSIS;

CLOSED LOOP CONTROL SYSTEMS; CONDITION MONITORING; ELECTRIC DRIVES; ELECTRICAL ENGINEERING; FAULT DETECTION; INDUCTION MOTORS; WAVELET ANALYSIS; WAVELET TRANSFORMS;

VIBRATIONS (MECHANICAL);

EID: 84887397282     PISSN: 21555516     EISSN: 21555532     Source Type: Conference Proceeding    
DOI: 10.1109/PowerEng.2013.6635893     Document Type: Conference Paper

References (44)

1. G.M. Di Blasi, V. Boscaino, P. Livreri, F. Marino, M. Minieri, "A Novel Linear-Non-Linear Digital Control for DC/DC Converter with Fast Transient Response", Proceedings of the IEEE Applied Power Electronics Conference, APEC'06, vol.1, pp.705-711, DOI:10.1109/APEC.2006.1620616.
2. V. Boscaino, P. Livreri, F. Marino, and M. Minieri, "Linear-non- linear Digital Control for DC-DC Converters with Fast Transient Response", Int. Journ. of Power and Energy Sys., 2009, vol. 29, pp.38-47. DOI: 10.2316/Journal.203.2009.1.203-4021.
3. V. Boscaino, G. Capponi, G.M. Di Blasi, P. Livreri, and F. Marino, "Modeling and simulation of a digital design approach for power supply systems", Proceedings of the IEEE Workshops on Computers in Power Electronics, COMPEL 2006, USA 2006, pp.246-249. DOI: 10.1109/COMPEL.2006.305638.
4. V. Boscaino, G. M. Di Blasi, P. Livreri, F. Marino, M. Minieri "A novel digital control technique for DC/DC converters to improve steady-state performances", Annual International Telecommunications Energy Conference, INTELEC 2006, Sept. 2006, pp. 1-4.
5. V. Boscaino, P. Livreri, F. Marino, and M. Minieri, "Current-Sensing Technique for Current-Mode Controlled Voltage Regulator Modules". Microelectronics Journal, Elsevier, vol.39, no.12, pp.1852-1859, 2008, DOI: 10.1016/j.mejo.2008.05.015, Dec. 2008.
6. V. Boscaino and G. Capponi, "A High-Efficiency, Low-Cost Solution for On-Board Power Converters", Advances in Power Electronics, Hyndawi, vol. 2012, pp. 1-12. doi:10.1155/2012/259756, Sept. 2012.
7. F. Pellitteri, V. Boscaino, R. La Rosa, and G. Capponi, "Improving the efficiency of a Standard Compliant Wireless Battery Charger", in IEEE International Universities Power Engineering Conference, UPEC 2012, UK, 2012, DOI: 10.1109/UPEC.2012.6398572, pp. 1-5.
8. V. Boscaino, F. Pellitteri, G. Capponi, and R. La Rosa, "A Wireless battery charger Architecture for Consumer Electronics", in IEEE International Conference on Consumer Electronics, ICCE 2012, Germany, 2012, pp.84-88. Doi: 10.1109/ICCE-Berlin.2012.6336483.
9. Di Dio V., La Cascia D., Miceli R. Rando C., "A mathematical model to determine the electrical energy production in photovoltaic fields under mismatch effect". 2009 International Conference on Clean Electrical Power, ICCEP Capri, 9-11 June 2009. Pages 46-51. ISBN: 978- 142442544-0. DOI: 10.1109/ICCEP.2009.5212083.
10. V. Boscaino, G. Capponi, P. Livreri, and F. Marino, "Fuel Cell Modelling for Power Supply Systems Design". Proceedings of the IEEE International Workshop on Control and Modeling for Power Electronics, COMPEL'08, Zurich, 2008. pp.1-5. DOI:10.1109/COMPEL.2008.4634671.
11. V. Boscaino, G. Capponi, and F. Marino, "FPGA implementation of a fuel cell emulator", Proceedings of the 20th IEEE International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM' 10, Italy, 2010, pp. 1297-1301. DOI: 10.1109/SPEEDAM.2010.5542090.
12. V. Boscaino, G. Capponi, P. Livreri, and F. Marino, " Measurementbased Load Modelling for Power Supply Systems Design" Proceedings of the IEEE Workshops on Computers in Power Electronics, COMPEL 2008, Zurich, 2008,pp. 1-4. Doi:10.1109/COMPEL.2008.4634672.
13. V. Di Dio, D. La Cascia, R. Liga, and R. Miceli, "Integrated mathematical model of proton exchange membrane fuel cell stack (PEMFC) with automotive synchronous electrical power drive," in Electrical Machines, 2008. ICEM 2008. 18th International Conference on, 2008, pp. 1-6. DOI: 10.1109/ICELMACH.2008.4800045.
14. D. Bonanno, F. Genduso, R. Miceli, and C. Rando, "Main Fuel Cells mathematical models: Comparison and analysis in terms of free parameters," in Electrical Machines (ICEM), 2010 XIX International Conference on, 2010, pp. 1-6. DOI: 10.1109/ICELMACH.2010.5608225
15. V. Boscaino, G. Capponi, and F. Marino, "Experimental test on a fuel cell-supercapacitor hybrid power supply for a digital still camera" Proceedings of the IEEE International Universities Power Engineering Conference, UPEC'09, Scotland, 2009, pp.1-5.
16. V. Boscaino, G. Capponi, P. Livreri, F. Marino "A fuel cell-based hybrid power supply for portable electronics devices", IEEE International Conference on Electronics, Circuits & Systems, ICECS 2008, 31 Agosto-3 Settembre 2008, pp. 69-72.
17. V. Boscaino, R. Collura, G. Capponi, and F. Marino, "A fuel cell-battery hybrid power supply for portable applications". Proceedings of the 20th IEEE International Symposium on Power Electronics, Electrical Drives, Automation and Motion, in Int. Symp. Power Electron. Elect. Drives Automation and Motion, SPEEDAM'10, Italy,2010,pp.580-585, DOI: 10.1109/SPEEDAM.2010. 5542091.
18. Di Tommaso, A.O., Genduso, F., Miceli, R., "Analytical investigation and control system set-up of medium scale PV plants for power flow management", Energies, Vol. 5, no. 11, Nov. 2012, Pages 4399-4416. ISSN: 19961073. DOI: 10.3390/en5114399.
19. Di Tommaso, A.O., Genduso, F., Miceli, R. "A geometrical simple approach for power silicon devices fault detection and fault-tolerant operation of a voltage source inverter". Proceedings-2012 20th International Conference on Electrical Machines, ICEM 2012. Pages 1526-1532, Marseille, 2-5 September 2012.ISBN: 978-146730142-8. DOI: 10.1109/ICElMach.2012.6350081.
20. Cecati C., Genduso F., Miceli, R., Ricco Galluzzo G., "A suitable control technique for fault-tolerant converters in distributed Generation".Proceedings-ISIE 2011: 2011 IEEE International Symposium on Industrial Electronics 2011, Pages 107-112, Gdansk, 27-30 June 2011. ISBN: 978-142449312-8. DOI: 10.1109/ISIE.2011.5984141.
21. Di Tommaso A O, Genduso F, Miceli R, Ricco Galluzzo G. "Computer Aided Optimization Via Simulation Tools of Energy Generation Systems With Universal Small Wind Turbines". In: 3rd IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) 2012. Aalborg, Denmark, June 25-28 2012, p. 570-577, Piscataway (NJ):IEEE, ISBN: 978-1-4673-2022-1, doi: 10.1109/PEDG.2012.6254059
22. Di Tommaso AO, Favuzza S, Genduso F, Miceli R, Ricco Galluzzo G. "Development of Diagnostic Systems for the Fault Tolerant Operation of Micro-Grids". In: SPEEDAM 2010-International Symposium onPower Electronics, Electrical Drives,Automation and Motion. Pisa, Italy, June 14th-16th, 2010, p. 1645-1650, Piscataway (NJ):IEEE, ISBN: 978-1- 4244-7919-1, doi: 10.1109/SPEEDAM.2010.5542262
23. Genduso F., Miceli, R., "A general mathematical model for nonredundant fault-tolerant inverters"2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011.Pages 705-710, Niagara Falls, 15-18 May 2011. DOI: 10.1109/IEMDC.2011.5994897.
24. Di Dio V., Miceli R., Trapanese M., "The use of sea waves for generation of electrical energy: A linear tubular asynchronous electrical generator", Oceans 2007 MTS/IEEE conference;Vancouver, BC, 29 Sept.- 4 Oct. 2007.ISSN: 01977385. DOI: 10.1109/OCEANS.2007.4449423.
25. Gritli Y, Di Tommaso A O, Filippetti F, Miceli R, Rossi C, Chatti C. "Investigation of Motor Current Signature and Vibration Analysis for Diagnosing Rotor Broken Bars in Double Cage Induction Motors". In: Proc. of the 2012 International Symposium on Power Electronics,Electrical Drives, Automation and Motion.(SPEEDAM 2012) Sorrento (Italy), 20-22 Giugno 2012, p. 1360-1365, Piscataway (NJ):IEEE, ISBN: 978-1-4673-1301-8. DOI: 10.1109/SPEEDAM.2012.6264465
26. Di Tommaso A O, Miceli R, Ricco Galluzzo G. "Monitoring and Diagnosis of Failures in Squirrel-Cage Induction Motors Due to Cracked or Broken Bars". In: SDEMPED 2011-8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives. Bologna, Italia, 05/09/2011, p. 39-44, Piscataway (NJ):IEEE, ISBN: 978-1-4244-9302-9, doi: 10.1109/DEMPED.2011.6063599
27. Di Tommaso A O, Genduso F, Miceli R, Ricco Galluzzo G. "Experimental Validation of a General Model for Three Phase Inverters Operating in Healthy and Faulty Modes". In: International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2012. Sorrento (Italy), 20-22/06/2012, p. 50-55, Piscataway (NJ):IEEE, ISBN: 978-1-4673-1301-8. DOI: 10.1109/SPEEDAM.2012.6264571.
28. H. A. Toliyat, S. Nandi, S. Choi, and H. Meshgin-Kelk, Electric Machines, Modeling, condition monitoring and Fault diagnosis. CRC Press, 2012.
29. A.H. Bonnett, C. Yung, "Increased Efficiency Versus Increased Reliability", IEEE Industry Applications Magazine, Vol. 14, Issue 1, Jan./Feb. 2008.
30. A. Bellini, F. Filippetti, C. Tassoni, G. A. Capolino, "Advances in Diagnostic Techniques for Induction Machines", IEEE Transactions on Industrial Electronics, vol. 55, no. 12, pp. 4109-4126, Dec. 2008.
31. J. Mroz, "Temperature field of a double squirrel-cage motor during startup," Electric Power Applications, IEE Proceedings -, vol. 152, no. 6, pp. 1531-1538, nov. 2005.
32. A. Stefani, A. Yazidi, C. Rossi, F. Filippetti, D. Casadei, G.A. Capolino, "Doubly fed induction machines diagnosis based on signature analysis of rotor modulating signals," IEEE Transactions on Industry Applications, vol. 44, no. 6, pp. 1711-1721, Nov./Dec. 2008.
33. Y. Gritli, L. Zarri, C. Rossi, F. Filippetti, G. Capolino, and D. Casadei, "Advanced diagnosis of electrical faults in wound rotor induction machines," IEEE Transactions on Industrial Electronics (Accepted for publication), p. 1, 2012.
34. A. Bellini, F. Filippetti, G. Franceschini, and C. Tassoni, "Closed-loop control impact on the diagnosis of induction motors faults," IEEE Transactions on Industry Applications, vol. 36, no. 5, pp. 1318-1329, Sep./Oct. 2000.
35. S. M. A. Cruz and A. J. M. Cardoso, "Diagnosis of rotor faults in closedloop induction motor drives," in Conf. Rec. IEEE IAS Annu. Meeting, Tampa, FL, 2006, pp. 2346-2353.
36. S. M. A. Cruz and A. J. M. Cardoso, "Analysis and diagnosis of rotor faults in high-performance induction motor drives," in Proc. Int. Conf. Elect. Mach., Chania, Greece, 2006, pp. 1-6.
37. R. S. Weiser, C. Kral, and F. Pirker, "The Vienna induction machine monitoring method; on the impact of the field oriented control structure on real operational behavior of a faulty machine," in Proc. 24th Annu. IEEE-IECON, Aug. 31-Sep. 4, 1998, vol. 3, pp. 1544-1549.
38. A. Ceban, R. Pusca, and R. Romary, "Study of rotor faults in induction motors using external magnetic field analysis," IEEE Transactions on Industrial Electronics, vol. 59, no. 5, pp. 2082-2093, may 2012.
39. A. Yazidi, H. Henao, G. A. Capolino, M. Artioli, F. Filippetti, and D. Casadei, "Flux signature analysis: An alternative method for the fault diagnosis of induction machines," in Proc. IEEE PowerTech, St. Petersburg, Russia, Jun. 2005, Paper n 424, CD-ROM.
40. R.F. Walliser, and C.F. Landy, "Assessment of interbar currents in double cage induction motors with broken bars," IEEE Transactions on Energy Conversion, vol. 9, no. 1, pp.159-164, March 1994.
41. A.O. Di Tommaso, R. Miceli, G. Ricco Galluzzo, "Monitoring and Diagnosis of Failures in Squirrel-Cage Induction Motors Due to Cracked or Broken Bar", IEEE-SDEMPED'2011, pp. 39-44, (Bologna) 2011.
42. C. Concari, G. Franceschini, and C. Tassoni, "Differential Diagnosis Based on Multivariable Monitoring to Assess Induction Machine Rotor Conditions", IEEE Transactions on Industrial Electronics, vol. 55, no. 12, Dec. 2008.
43. Y. Gritli, A.O. Di Tommaso, F. Filippetti, R. Miceli, and C. Rossi "Advanced Monitoring of Rotor Broken Bar in Double Squirrel Cage Induction Machines Based on Wavelet analysis", International Symposium Ecological Vehicle Exhibition and Renewable Energies- EVER'2012, Monaco (France), Mars 2012.
44. J. J. Rangel-Magdaleno, R. J. Romero-Troncoso, R. A. Osornio-Rios, E. Cabal-Yepez, and L. M. Contreras-Medina, "Novel Methodology for Online Half-Broken-Bar Detection on Induction Motors", IEEE Trans. on Inst. and Meas., vol. 58, no. 5, May. 2009.