High Temperature Aerosols: Measurement and Deposition of Nanoparticle Films

Aerosol Measurement: Principles, Techniques, and Applications: Third Edition

Volumn , Issue , 2011, Pages 723-738

  Biswas, Pratim ^a   Thimsen, Elijah ^b  

^a WASHINGTON UNIVERSITY IN ST LOUIS   (United States)

^b ARGONNE NATIONAL LABORATORY   (United States)

Author keywords

Dilution sampling, high temperature aerosol measurement aerosol dynamics; High temperature aerosols, measurement and nanoparticle film deposition; Optical techniques, advantages of in situ, nonintrusive measurements greater spatial resolution

Indexed keywords

EID: 84887379609     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781118001684.ch33     Document Type: Chapter

References (66)

1. Alam, M. K., and Flagan, R. C. (1986). Controlled nucleation aerosol reactors: production of bulk silicon. Aerosol Sci. Technol. 5:237-248.
2. Almquist, C. B., and Biswas, P. (2002). Role of synthesis method and particle size of nanostructured TiO2 on its photoactivity. J Catal. 212:145-156.
3. Barbe, C. J., Arendse, F., Comte, P., Jirousek, M., Lenzmann, F., Shklover, V., and Gratzel, M. (1997). Nanocrystalline titanium oxide electrodes for photovoltaic applications. J. Am. Ceram. Soc. 80:3157-3171.
4. Biswas, P. (1985). Impactors for Aerosol Measurements: Developments and Sampling Biases. California Institute of Technology, Pasadena, CA.
5. Biswas, P., and Flagan, R. C. (1988). The particle trap impactor. J. Aerosol Sci. 19:113-122.
6. Biswas, P., and Wu, C. Y. (1998). Control of toxic emissions from combustors using sorbents: A review. J. Air Waste Manag. Assoc. 48:113-127.
7. Biswas, P., and Zachariah, M. (1997). In situ immobilization of lead species in combustion environments by injection of gas phase silica sorbent precursors. Environ. Sci. Technol. 31:2455-2463.
8. Biswas, P., Li, X., and Pratsinis, S. E. (1989). Optical waveguide preform fabrication. J. Appl. Phys. 65:2445.
9. Biswas, P., Yang, G., and Zachariah, M. R. (1998). In situ processing of ferroelectric materials from lead waste streams by injection of gas phase titanium precursors: Laser induced fluorescence and x-ray diffraction measurements. Combust. Sci. Technol. 134:183-200.
10. Bonczyk, P. A., (1979). Measurement of particulate size by in situ laser-optical methods: A critical evaluation applied to fuelpyrolyzed carbon. Combust. Flame 35:191-206.
11. Bonczyk, P. A., and Sangiovanni, J. J. (1984). Optical and probe measurements of soot in a burning fuel droplet stream. Combust. Sci. Technol. 36:135-147.
12. Bonfanti, L., and Cioni, M. (1986). Sampling of polynuclear aromatic hydrocarbons at stack with a dilution sampler. In Aerosols: Formation and Reactivity. 2nd International Aerosol Conference, Berlin, pp. 952-955.
13. Chang, H., and Biswas, P. (1990). In situ light scattering dissymmetry measurements of the evolution of the aerosol size distribution in flames. In Annual Meeting of the American Association for Aerosol Research, AAAR 9th Annual Conference, June 18-22, 1990, Philadelphia, PA.
14. Chang, H., and Biswas, P. (1991). Multiangle light scattering dissymmetry measurements to determine evolution of silica particle size distributions in flames. In Annual Meeting of the American Association for Aerosol Research, AAAR 10th Annual Conference, October 7-11, 1991, Traverse City, MI.
15. Cho, K., and Biswas, P. (2006). A geometrical sintering model (GSM) to predict surface area change. J. Aerosol Sci. 37:1378-1387.
16. Crawford, S., Thimsen, E., and Biswas, P. (2009). Impact of different electrolytes on photocatalytic water splitting. J. Electrochem. Soc. 156:H346-H351.
17. Crump, J. G., Flagan, R. C., and Seinfeld, J. H. (1983). Particle wall losses in vessels. Aerosol Sci. Technol. 2:303-310.
18. Cummins, H. Z., and Swinney, H. L. (1970). Light beating spectroscopy. Prog. Optics VIII:134-138.
19. Daisey, J. M., Cheney, J. L., and Lioy, P. J. (1986). Profiles of organic particulate emissions from air pollution sources: status and needs for receptor source apportionment models. J. Air. Pollut. Control Assoc. 36(1):17-33.
20. Dave, J. V. (1968). Subroutine for computing the parameters of the electromagnetic radiation scattered by a sphere, IBM Palo Alto Scientific Center, Report No. 320-3237, California, USA.
21. De Lasa, H. I., Serrano, B., and Salaices, M. (2005). Photocatalytic Reaction Engineering. Springer, New York.
22. Du, C. X., and Kittleson, D. B. (1984). In-cylinder measurements of diesel particle size distributions. In Aerosols, Liu, B. Y. H., Pui, D. Y. H., and Fissan, H. (eds). Elserier, New York. 744-748.
23. Eckbreth, A. C. (1988). Laser Diagnostics for Combustion Temperature and Species. Abacus, Cambridge, MA.
24. Flower, W. L. (1983a). Measurements of the diffusion-coefficient for soot particles in flames. Phys. Rev. Lett. 51:2287-2290.
25. Flower, W. L. (1983b). Optical measurements of soot formation in premixed flames. Combust. Sci. Technol. 33:17-33.
26. Flower,W. L., and Hurd, A. J. (1987). In situ measurement of flameformed silica particles using dynamic light-scattering. Appl. Opt. 26:2236-2239.
27. Friedlander, S. K. (2000). Smoke, Dust, and Haze: Fundamentals of Aerosol Dynamics. Oxford University Press, New York. F ujishima, A., and Honda, K. (1972). Electrochemical photolysis of water at a semiconductor electrode. Nature 238:37.
28. Gallagher, N. B., Bool, L. E.,Wendt, J., and Peterson, T.W. (1990). Alkali metal partitioning in ash from pulverized coal combustion. Comb. Sci. Technol. 74:211-221.
29. Gratzel, M. (2001). Photoelectrochemical cells. Nature 414: 338-344.
30. Hildemann, L. M., Cass, G. R., and Markowski, G. R. (1989). A dilution stack sampler for collection of organic aerosol emissions: design, characterization and field tests. Aerosol Sci. Technol. 10:193-204.
31. Hinds, W. C. (1999). Aerosol Technology. John Wiley and Sons, New York.
32. Houck, J. E., Cooper, J. A., and Larson, E. R. (1982). Dilution sampling for chmical receptor source finger-printing. In Paper Read at the 75th Annual Meeting of the Air Pollution Control Association, New Orleans, LA, 82-61M.2.
33. Huynh, C. K., Duc, T. V., Schwab, C., and Rollier, H. (1984). In-stack dilution technique for the sampling of polycyclic organic-compounds-Application to effluents of a domestic waste incineration plant. Atmos. Environ. 18:255-259.
34. Kerker, M., and Mer, V. K. L. (1950). Particle size distribution in sulfur hydrosols by polarimetric analysis of scattered light. J. Am. Chem. Soc. 72:3516-3525.
35. Kobata, A., Kusakabe, K., and Morooka, S. (1991). Growth and transformation of TiO2 crystallites in aerosol reactor. AIChE J. 37:347-359.
36. Kulkarni, P., and Biswas, P. (2003). Morphology of nanostructured films for environmental applications: Simulation of simultaneous sintering and growth. J. Nanopart. Res. 5:259-268.
37. Linak, W. P., and Peterson, T. W. (1984). Effect of coal type and residence time on the submicron aerosol distribution from pulverized coal combustion. Aerosol Sci. Technol. 3:77-96.
38. Madler, A. L., Roessler, A., and Pratsinis, S. E. (2006a). Direct formation of highly porous gas-sensing films by in-situ thermophoretic deposition of flame-made Pt/SnO2 nanoparticles. Sens. Actuators B 114:283-295.
39. Madler, L., Lall, A., and Friedlander, S. (2006b). One-step aerosol synthesis of nanoparticle agglomerate films: Simulation of film porosity and thickness. Nanotechnology 17:4783-4795.
40. Mangolini, L., Thimsen, E., and Kortshagen, U. (2005). High-yield plasma synthesis of luminescent silicon nanocrystals. Nano. Lett. 5:655-659.
41. Maron, S. H., and Elder, M. E. (1963). Determination of latex particle size by light scattering. J. Colloid Sci. 18:107-118.
42. McMillin, B. K., Biswas, P., and Zachariah, M. R. (1996). In situ characterization of vapor phase growth of iron oxide-silica nanocomposites. 1. 2-D planar laser-induced fluorescence and Mie imaging. J. Mater. Res. 11:1552-1561.
43. Megaridis, C. M., and Dobbins, R. A. (1989). Comparison of soot growth and oxidation in smoking and non-smoking ethylene diffusion flames. Combust. Sci. Technol. 66:1-16.
44. Newton, G. J., Carpenter, R. L., Yeh, H. C., and Peele, E. R. (1980). Respirable aerosols from fluidized-bed coal combustion. 1. Sampling methodology for an 18-inch experimental fluidizedbed coal combustor. Environ. Sci. Technol. 14:849-853.
45. Nowotny, J., Sorerell, C. C., Sheppard, L. R., and Bak, T. (2005). Solar-hydrogen: Environmentally safe fuel for the future. Int. J. Hydrogen Energy 30:521-544.
46. Pedersen, P. S., Ingwersen, J., Nielsen, T., and Larsen, E. (1980). Effects of fuel, lubricant, and engine operating parameters on the emission of polycyclic aromatic hydrocarbons. Environ. Sci. Technol. 14:71-79.
47. Pratsinis, S. E., Bai, H., Biswas, P., Frenklach, M., and Mastrangelo, S. V. R. (1990). Kinetics of titanium(IV) chloride oxidation. J. Am. Ceram. Soc. 73:2158-2162.
48. Presser, C., Gupta, A. K., Semerjian, H. G., and Santoro, R. J. (1990). Application of laser diagnostic-techniques for the examination of liquid fuel spray structure. Chem. Eng. Commun. 90:75-102.
49. Rane, K. S., Mhalsiker, R., Yin, S., Sato, T., Cho, K., Dunbar, E., and Biswas, P. (2006). Visible light-sensitive yellow TiO2-xNx and Fe-N co-doped Ti1-yFeyO2-xNx anatase photocatalysts. J Solid State Chem 179:3033-3044.
50. Santoro, R. J., Semerjian, H. G., and Dobbins, R. A. (1983). Soot particle measurements in diffusion flames. Combust. Flame 51:203-218.
51. Santoro, R. J., Yeh, T. T., Horvath, J. J., and Semerjian, H. G. (1987). The transport and growth of soot particles in laminar diffusion flames. Combust. Sci. Technol. 53:89-115.
52. Scotto, M. V., Bassham, A., Wendt, J., and Peterson, T. W. (1988). Quench induced nucleation of ash constituents during combustion of pulverized coal in a laboratory furnace. In Proceedings of the 22nd International Symposium on Combustion, The Combustion Institute, pp. 239-247.
53. Sethi, V., and Biswas, P. (1990). Fundamental studies on particulate emissions from hazardous waste incinerators. In Proceedings of the 16th Annual RREL Hazardous Waste Research Symposium, EPA/600/9-90073, Cincinnati: USEPA, pp. 59-67.
54. Sousa, I. A., Houck, J. E., Cooper, I. A., and Daisey, I. M. (1987). The mutagenic activity of particulate organic matter collected with a dilution sampler at coal fired power plants. J. Air Pollut. Control Assoc. 37:1439-1344.
55. Stamatakis, P., Natalie, C. A., Palmer, B. R., and Yuill, W. A. (1991). Research needs in aerosol processing. Aerosol Sci. Technol. 14:316-321.
56. Thimsen, E., and Biswas, P. (2007). Nanostructured photoactive films synthesized by a flame aerosol reactor. AIChE J. 53:1727-1735.
57. Thimsen, E., Rastgar, N., and Biswas, P. (2008). Nanostructured TiO2 films with controlled morphology synthesized in a single step process: Performance of dye-sensitized solar cells and photo watersplitting. J. Phys. Chem. C 112:4134-4140.
58. Thimsen, E., Biswas, S., Lo, C., and Biswas, P. (2009). Predicting the band structure of mixed metal-oxdies: Theory and Experiment. J. Phys. Chem. C 113:2014-2021.
59. Tricoli, A., Graf, M., and Pratsinis, S. E. (2008). Optimal Doping for Enhanced SnO2 Sensitivity and Thermal Stability. Adv. Funct. Mat. 18:1969-1976.
60. Ulrich, G. D., and Riehl, J. W. (1982). Aggregation and Growth of Sub-Micron Oxide Particles in Flames. J. Coll. Interface Sci. 87:257-265.
61. van de Hulst, H. C. (1981). Light Scattering by Small Particles. Dover, New York.
62. Wang, Z. M., Yang, G. X., Biswas, P., Bresser, W., and Boolchand, P. (2001). Processing of iron-doped titania powders in flame aerosol reactors. Powder Technol. 114:197-204.
63. Wu, J. J., and Flagan, R. C. (1987). Onset of runaway nucleation in aerosol reactors. J. Appl. Phys. 61:1365-1371.
64. Zachariah, M. R., and Burgess, D. R. F. (1994). Strategies for laser excited fluorescence spectroscopy. Measurements of gas phase species during particle formation. J. Aerosol Sci. 25: 487-498.
65. Zachariah, M. R., Chin, D., Semerjian, H. G., and Katz, J. L. (1989). Dynamic light-scattering and angular dissymmetry for the in situ measurement of silicon dioxide particle synthesis in flames. Appl. Opt. 28:530-536.
66. Zimmer, A. T., and Biswas, P. (2001). Characterization of the aerosols resulting from arc welding processes. J. Aerosol Sci. 32:993-1008.