Fatigue behavior of Ti6Al4V and 316 LVM blasted with ceramic particles of interest for medical devices

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 30, Issue , 2014, Pages 30-40

  Barriuso, S ^a   Chao, J ^a   Jimenez J A ^a   Garcia S ^b   Gonzalez Carrasco J L ^a,c  

^a DEPARTMENT OF PHYSICAL METALLURGY   (Spain)

^b Centro de Investigación Biomédica en Red en Bioingeniería Biomateriales y Nanomedicina ^*  (Spain)

^c BIOMATERIALES Y NANOMEDICINA CIBER BBN   (Spain)

Author keywords

316 LVM; Biomaterials; Fatigue strength; Grit blasting; Mechanical behavior; Ti6Al4V

Indexed keywords

ALLOY STEEL; ALUMINA; ALUMINUM; BIOLOGICAL MATERIALS; BIOMATERIALS; BIOMEDICAL EQUIPMENT; BLASTING; MECHANICAL PROPERTIES; STRAIN HARDENING; STRESS CONCENTRATION; SURFACE ROUGHNESS; ZIRCONIA;

316 LVM; FATIGUE STRENGTH; GRIT BLASTING; MECHANICAL BEHAVIOR; TI-6AL-4V;

VANADIUM ALLOYS;

ALLOY; ALUMINUM OXIDE; STEEL; ZIRCONIUM OXIDE;

ARTICLE; CERAMICS; COMPARATIVE STUDY; FATIGUE; HARDNESS; LOW VACUUM MELTING; MEDICAL DEVICE; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; STRESS; SURFACE PROPERTY; VACUUM; X RAY DIFFRACTION;

316 LVM; BIOMATERIALS; FATIGUE STRENGTH; GRIT BLASTING; MECHANICAL BEHAVIOR; TI6AL4V;

ALUMINUM OXIDE; BIOCOMPATIBLE MATERIALS; CERAMICS; COMPRESSIVE STRENGTH; EQUIPMENT AND SUPPLIES; MATERIALS TESTING; STAINLESS STEEL; SURFACE PROPERTIES; TENSILE STRENGTH; TITANIUM; ZIRCONIUM;

EID: 84887323490     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2013.10.013     Document Type: Article

References (34)

1. Aparicio C., Gil F.J., Thams U., Muñoz F., Padrós A., Planell J.A. Osseointegration of grit-blasted and bioactive titanium implants: histomorphometry in minipigs. Key Eng. Mater. 2004, 254-256:737-740.
2. Baleani M., Viceconti M., Toni A. The effect of sandblasting treatment on endurance properties of titanium alloy hip prostheses. Artif. Organs 2000, 24(4):296-299.
3. Bäumer A., Jiménez J.A., Bleck W. Effect of temperature and strain rate on strain hardening and deformation mechanisms of high manganese austenitic steels. Int. J. Mater. Res. 2010, 101:705-714.
4. Boller Chr., Seeger T. Materials Data for Cyclic Loading. Part. D: Aluminium and Titanium Alloys. Materials Science Monograph, 42 D 1987, 127. Elsevier, Amsterdam.
5. Byun T.S., Farrel K., Lee E.H., Hunn J.D., Mansur L.K. Strain hardening and plastic instability properties of austenitic stainless steels after proton and neutron irradiation. J. Nucl. Mater. 2001, 298(3):269-279.
6. Chait R. The strength differential of steel and Ti alloys is influenced by test temperature and microstructure. Scr. Metall. 1973, 7:351-354.
7. Chan K.S. Roles of microstructure in fatigue crack initiation. Int. J. Fatigue 2010, 32:1428-1447.
8. Chan K.S., Lee Y.-D. Effects of deformation induced constraint on high-cycle fatigue in Ti alloys with duplex microstructure. Metall. Mater. Trans. A 2008, 39A:1665-1675.
9. Canabarro A., Diniz M.G., Paciornik S., Carvalho L., Sampaio E.M., Beloti M.M., Rosa A.L., Fischer R.G. High concentration of residual aluminium oxide on titanium surface inhibits extracellular matrix mineralization. J. Biomed. Mater. Res. Part A 2008, 87:588-597.
10. Conforto E., Aronsson B.O, Salito A., Crestou C., Caillard D. Rough surfaces of titanium and titanium alloys for implants and prostheses. Mater. Sci. Eng., C 2004, 24:611-618.
11. Freudhental A.M. New aspects of fatigue and fracture mechanics. Eng. Fract. Mech. 1974, 8(6):775-793.
12. Frutos E., Multigner M., González-Carrasco J.L. Novel approaches to determine residual stresses by ultramicroindentation techniques: application to sand blasted austenitic stainless steel. Acta Mater. 2010, 58:4191-4198.
13. Gil F.J., Planell J.A., Padrós A., Aparicio C. The effect of shot blasting and heat treatment on the fatigue behavior of titanium for dental implant applications. Dent. Mater. 2007, 23(4):486-491.
14. Goldberg V.M., Stevenson S., Feighan J., Davy D. Biology of grit-blasted titanium alloy implants. Clin. Ortho. Relat. Res. 1995, 319:122-129.
15. Hong T, Ooi J.Y., Shaw B. A numerical simulation to relate the shot peening parameters to the induced residual stresses. Eng. Fail. Anal. 2008, 15:1097-1110.
16. Jiang X.P., Wang X.Y., Li J.X., Li D.Y., Man C.-S., Shepard M.J., Zhai T. Enhancement of fatigue and corrosion properties of pure Ti by sandblasting. Mater. Sci. Eng., A 2006, 429(1-2):30-35.
17. Leinenbach C., Eifler D. Fatigue and cyclic deformation behaviour of surface modified titanium alloys in simulated physiological media. Biomaterials 2006, 27:1200-1208.
18. Multigner M., Frutos E., Mera L., Chao J., González-Carrasco J.L. Interrogations on the sub-surface strain hardening of grit blasted Ti-6Al-4V alloy. Surf. Coat. Technol. 2009, 203:2036-2040.
19. Multigner M., Frutos E., González-Carrasco J.L., Jiménez J.A., Marín P., Ibáñez J. Influence of the sandblasting of 316 LVM steel on the subsurface microstructure: implications on the magnetic and mechanical properties. Mater. Sci. Eng., C 2009, 29:1357-1360.
20. Multigner M., Fernández-Castrillo P., Ferreira-Barragán S., González-Doncel G., González-Carrasco J.L. Influence of sandblasting of Ti6Al4V alloy on the subsurface hardness and residual stresses state. Rev. Metal. 2009, 45:52-55.
21. Multigner M., Ferreira S., Frutos E., Jaafar M., Ibáñez J., Marín P., Pérez-Prado T., González-Doncel G., Asenjo A., González-Carrasco J.L. Superficial severe plastic deformation of 316 LVM stainless steel through grit blasting: effects on its microstructure and subsurface mechanical properties. Surf. Coat. Technol. 2010, 205:1830-1837.
22. Neal D.F., Blenkinshop P.A. Internal fatigue origins in α-β Ti alloys. Acta Metall. 1976, 24:59-63.
23. Ortiz A.L., Tian J.W., Villegas J.C., Shaw L.L., Liaw P.K. Interrogation of the microstructure and residual stress of a nickel-base alloy subjected to surface severe plastic deformation. Acta Metall. 2008, 56:413-426.
24. Pang J.C., Li S.X., Wang Z.G., Zhang Z.F. General relation between tensile strength and fatigue strength of metallic materials. Mater. Sci. Eng., A 2013, 564:331-341.
25. Roland T., Retraint D., Lu K., Lu J. Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment. Scr. Mater. 2006, 54:1949-1954.
26. Roland T., Retraint D., Lu K., Lu J. Enhanced mechanical behavior of a nanocrystallised stainless steel and its thermal stability. Mater. Sci. Eng., A 2007, 445-446:281-288.
27. Sawada H. Residual electron-density study of alpha-aluminum oxide through refinement of experimental atomic scattering factors. Mater. Res. Bull. 1994, 29(2):127-133.
28. Schuh A., Uter W., Kachler W., Göske J., Zeiler G., Lill C. Comparative surface examinations on corund blasted titanium implants and explants in total hip arthroplasty. Arch. Orthop. Trauma. Surg. 2005, 125:676-682.
29. 2_database_code_amcsd 0009296. Acta Crystallogr. 1965, 18:983-991.
30. Wagner L., Lüetjering G. Influence of Shot Peening on the Fatigue Behaviour of Titanium Alloys. Niku-Lari 1982, 453-460. Pergamon Press. A. Shot Peening (Ed.).
31. Wagner, L., Lüetjering, G., 1984. Influence of the Shot Peening Parameters on the Surface Layer Properties and the Fatigue Life of Ti-6Al-4V, ICSP-2, G.P. Balear and H.O. Fuchs (Eds.), Chicago, IL, USA, 195.
32. Wang X.Y., Li D.Y. Mechanical, electrochemical and tribological properties of nano-crystalline surface of 304 stainless steel. Wear 2003, 225:836-845.
33. Wennerberg A., Albrektsson T., Andersson B. Bone tissue response to commercially pure titanium implants blasted with fine and coarse particles of aluminium oxide. Int. J. Oral Maxillofac. Implants 1996, 11:38-45.
34. Zhang H.W., Hei Z.K., Liu G., Lu J., Lu K. Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment. Acta Mater. 2003, 51:1871-1881.