The characterisation of energy consumption in manufacturing facilities - A hierarchical approach

International Journal of Automation Technology

Volumn 7, Issue 6, 2013, Pages 727-734

  O'Driscoll, Eoin ^a   Cusack, Dónal Óg ^b   O'Donnell, Garret E ^a  

^a TRINITY COLLEGE DUBLIN   (Ireland)

^b Innovation for Ireland's Energy Efficiency Research Centre I2E2 Co   (Ireland)

Author keywords

Energy efficiency; Energy measurement

Indexed keywords

CHARACTERIZATION; ELECTRIC POWER MEASUREMENT; ENERGY MANAGEMENT; ENERGY UTILIZATION; INDUSTRIAL RESEARCH; MACHINE TOOLS; MANUFACTURE;

ELECTRICAL ENERGY CONSUMPTION; ENERGY EFFICIENCY IMPROVEMENTS; ENERGY-EFFICIENT MACHINE; ENVIRONMENTAL TAXES; HIERARCHICAL APPROACH; MANUFACTURING FACILITY; MANUFACTURING SECTOR; MEASUREMENT DEVICE;

ENERGY EFFICIENCY;

EID: 84887060884     PISSN: 18817629     EISSN: 18838022     Source Type: Journal    
DOI: 10.20965/ijat.2013.p0727     Document Type: Article

References (30)

1. Intergovernmental Panel on Climate Change, (IPCC), "Climate change synthesis report; an assessment of the intergovernmental panel on climate change, " 2008.
2. Global Economic Symposium, "The energy crisis and climate change, " 01 August 2011.
3. C. Herrmann, S. Thiede, S. Kara, and J. Hesselbach, "Energy oriented simulation of manufacturing systems-concept and application, " CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, pp. 45-48, 2011.
4. International Energy Agency (IEA), "The lean and energy toolkit, achieving process excellence using less energy, " 2007.
5. D. Muller, F. Marechal, T. Wolewinski, and P. J. Roux, "An energy management method for the food industry, " Applied Thermal Engineering, Vol. 27, No. 16, pp. 2677-2686, 2007.
6. F. Jovane, H. Yoshikawa, L. Alting, C. Boer, E. Wetkamper, D. Williams, M. Tseng, G. Seliger, and A. Paci, "The incoming global technological and industrial revolution towards competitive sustainable manufacturing, " CIRP Annals-Manufacturing Technology, Vol. 57, pp. 641-659, 2008.
7. A. De-Filippi, R. Ippolito, and G. Micheletti, "Forecast of the electric energy requirement in a mechanical plant by using a stochastic model, " CIRP Annals-Manufacturing Technology, Vol. 29, No. 1, pp. 285-288, 1980.
8. A. De-Filippi, R. Ippolito, and G. Micheletti, "Nc machine tools as electric energy users, " CIRP Annals-Manufacturing Technology, Vol. 30, No. 1, pp. 323-326, 1981.
9. L. Alting, "Life-cycle design of products: A new opportunity for manufacturing enterprises, in Concurrent Engineering: Automation, Tools and Techniques, " JohnWiley and Sons, New York, 1993.
10. E. Westkmper and L. Alting, "Life cycle management and assessment: Approaches and visions towards sustainable manufacturing (keynote paper), " CIRP Annals-Manufacturing Technology, Vol. 49, No. 2, pp. 501-526, 2000.
11. S. Kara and S. Ibbotson, "Embodied energy of manufacturing supply chains, " CIRP J. of Manufacturing Science and Technology, Vol. 4, No. 3, pp. 317-323, 2011.
12. J. Hesselbach, C. Hermann, R. Detzer, L. Martin, and L. B. Thiede, S., "Energy efficiency through optimized coordination of production and technical building services, " 15th CIRP Int. Conf. on life Cycle Engineering, 2009.
13. A. Thumann, W. J. Younger, and T. Niehus, "Handbook of energy audits, " 2010.
14. N. Lammers, F. Sever, B. Abels, and J. K. Kissock, "Measuring progress with normalized energy intensity, " Department of Mechanical and Aerospace Engineering, University of Dayton, Ohio. Technical white paper, 2011.
15. J. K. Kissock and J. Seryak, "Lean energy analysis: Identifying, discovering, and tracking energy savings potential, " Society of Manufacturing Engineers: Advanced Energy and Fuel Cell Technologies Conf., Livonia, Michigan, 2004.
16. B. Abels, F. Sever, J. K. Kissock, and D. Ayele, "Understanding industrial energy use through lean energy analysis, " Department of Mechanical and Aerospace Engineering, University of Dayton, Ohio. Technical white paper, 2011.
17. L. Yang, J. Deuse, and P. Jiang, "Miltiple attribute decision making approach for an energy efficient facility layout design, " Int. J. of Advanced Manufacturing Technology, 2012. (in press)
18. R. Larek, E. Brinksmeier, D. Meyer, T. Pawletta, and O. Hagendorf, "A discrete-event simulation approach to predict power consumption in machining processes, " Production Engineering, Vol. 5, No. 5, pp. 575-579, 2011.
19. ABS Energy Research Company, "World electricity meter report, " 2010.
20. E. O'Driscoll and G. E. O'Donnell, "Industrial power and energy metering, " J. of Cleaner Production, Vol. 41, pp. 53-64, 2013.
21. N. Weinert, S. Chiotellis, and G. Seliger, "Methodology for planning and operating energy-efficient production systems, " CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, pp. 41-44, 2011.
22. C. Herrmann and S. Thiede, "Process chain simulation to foster energy efficiency in manufacturing, " CIRP J. of Manufacturing Science and Technology, Vol. 1, No. 4, pp. 221-229, 2009.
23. th Global Conf. on Sustainable Manufacturing, pp. 349-354, 2009.
24. E. O'Driscoll, D. Og Cusack, and G. E. O'Donnell, "The development of energy performance indicators within a complex manufacturing facility, " Int. J. of Advanced Manufacturing Technology, 2013. (in press)
25. S. Rahimifard, Y. Seow, and T. Childs, "Minimising embodied product energy to support energy efficient manufacturing, " CIRP Annals-Manufacturing Technology, Vol. 59, No. 1, pp. 25-28, 2010.
26. V. Balogun and P. Mativenga, "Modelling of direct energy requirements in mechanical machining processes, " J. of Cleaner Production, Vol. 41, pp. 179-186, 2013.
27. T. Gutowski, G. Dahmus, and A. Thiriez, "Electrical energy requirements for manufacturing processes, " in 13th CIRP int. conf. on Life Cycle Engineering, 2006.
28. M. Mori, M. Fujishima, Y. Inamasu, and Y. Oda, "A study on energy efficiency improvement for machine tools, " CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, pp. 145-148, 2011.
29. Hurco, "VM Series machining centre documentation-Mill maintenance and safety manual, " 2009.
30. E. Abele, Y. Altintas, and C. Brecher, "Machine tool spindle units, " CIRP Annals-Manufacturing Technology, Vol. 59, pp. 781-802, 2010.