Statistical effects of using ceramic particles in glass fibre reinforced composites

Materials and Design

Volumn 55, Issue , 2014, Pages 463-470

  Detomi, Anine Cristina ^a   Santos, Reniene Maria dos ^a   Filho, Sergio Luiz Moni Ribeiro ^a   Martuscelli, Carolina Coelho ^a   Panzera, Túlio Hallak ^a   Scarpa, Fabrizio ^b  

^a FEDERAL UNIVERSITY OF SÃO JOÃO DEL REI   (Brazil)

^b UNIVERSITY OF BRISTOL   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

BENDING STRENGTH; GLASS FIBERS;

FLEXURAL PROPERTIES; FULL FACTORIAL DESIGN; GLASS FIBRE COMPOSITES; GLASS FIBRE REINFORCED COMPOSITES; LAMINATE COMPOSITES; MECHANICAL PERFORMANCE; MICROSTRUCTURAL ANALYSIS; PROPAGATION MECHANISM;

LAMINATED COMPOSITES;

EID: 84886839366     PISSN: 02613069     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2013.09.026     Document Type: Article

References (36)

1. Tsai J.L., Huang B.H., Cheng Y.L. Enhancing fracture toughness of glass/epoxy composites by using rubber particles together with silica nanoparticles. J Compos Mater 2009, 43:3107-3123.
2. Rosso P., Ye L., Friedrich K., Sprenger S. A toughened epoxy resin by silica nanoparticle reinforcement. J Appl Polym Sci 2006, 100:1849-1855.
3. Isik I., Yilmazer U., Bayram G. Impact modified epoxy/montmorillonite nanocomposites: synthesis and characterization. Polymer 2003, 44:6371-6377.
4. Yasmin A., Abot J.L., Daniel I.M. Processing of clay/epoxy nanocomposites by shear mixing. Script Mater 2003, 49:81-86.
5. Ávila A., Duarte H.V., Soares M.I. The nanoclay influence on impact response of laminated plates. Latin Am J Solid Struct 2006, 3:3-20.
6. Ávila A., Soares M.I., Neto A.S.A. Study on nanostructured laminated plates behavior under low-velocity impact loadings. Intern J Imp Eng 2007, 34:28-41.
7. Haque A., Shamsuzzoha M., Hussain F., Dean D. S2-glass/epoxy polymer nanocomposites: manufacturing, structures, thermal and mechanical properties. J Compos Mater 2003, 37:1821-1837.
8. Subramaniyan A.K., Sun C.T. Enhancing compressive strength of unidirectional polymeric composites using nanoclay. Compos: Part A 2006, 37:2257-2268.
9. Tsai J., Cheng Y. Investigating silica nanoparticle effect on dynamic and quasi-static compressive strengths of glass fibre/epoxy nanocomposites. J Compos Mater 2009, 43:3143-3155.
10. Cao Y., Cameron J. Impact properties of silica particle modified glass fibre reinforced epoxy composite. J Reinf Plast Compos 2006, 25:761-769.
11. 2-epoxy composite coating. Mater. Des. 2011, 32:4180-4186.
12. Boonyapookana A., Nagata K., Mutoh Y. Fatigue crack growth behavior of silica particulate reinforced epoxy resin composite. Compos Sci Technol 2011, 71:1124-1131.
13. Moisala A., Lia Q., Kinloch I.A., Windle A.H. Thermal and electrical conductivity of single and multi-walled carbon nanotube-epoxy composites. Compos Sci Technol 2006, 66:1285-1288.
14. Suresha B., Chandramohan G., Renukappa N.M. Influence of silicon carbide filler on mechanical and dielectric properties of glass fabric reinforced epoxy composites. J Appl Polym Sci 2009, 111:685-691.
15. Uddin M.F., Sun C.T. Strength of unidirectional glass/epoxy composite with silica nanoparticle-enhanced matrix. Compos Sci Technol 2008, 68:1637-1643.
16. Uddin M.F., Sun C.T. Improved dispersion and mechanical properties of hybrid nanocomposites. Compos Sci Technol 2010, 70:223-230.
17. Sudarisman, Davies I.J., Hamada H. Compressive failure of unidirectional hybrid fibre-reinforced epoxy composites containing carbon and silicon carbide fibres. Compos Part A: Appl Sci Manufact 2007, 38:1070-1074.
18. Nhuapeng W., Thamjaree W., Kumfu S., Singjai P., Tunkasiri T. Fabrication and mechanical properties of silicon carbide nanowires/epoxy resin composites. Curr Appl Phys 2008, 8:295-299.
19. Cortes D.A., Hogg P.J., Tanner K.E., Ren G. Mechanical properties of carbon-fibre reinforced silicate matrix composites. Mater Des 2007, 28:1547-1554.
20. Cao Y., Cameron J. Flexural and shear properties of silica particle modified glass fibre reinforced epoxy composite. J Reinf Plast Compos 2006, 25:347-359.
21. Yang Z., Zhao B., Qin S., Hu Z., Jin Z., Wang J. Study on the mechanical properties of hybrid reinforced rigid polyurethane composite foam. J Appl Polym Sci 2006, 92:1493-1500.
22. Lin J., Ma C.M., Tai N., Chang W., Tsai C. Carbon fibre reinforced phenolic resin/silica ceramer composites-processing, mechanical and thermal properties. Polym Compos 2000, 21:305-311.
23. Manjunatha C.M., Sprenger S., Taylor A.C., Kinloch A.J. The tensile fatigue behavior of a glass-fibre reinforced plastic composite using a hybrid-toughened epoxy matrix. J Compos Mater 2010, 44:2095-2109.
24. Imai T., Sawa F., Nakano T., Ozaki T., Shimizu T., Kozako M., et al. Effects of nano- and micro-filler mixture on electrical insulation properties of epoxy based composites. IEEE Trans Dielect Elect Insul 2006, 13:319-325.
25. 2 nanoparticles on the improved performance of epoxy and fibre composites. J Reinf Plast Compos 2005, 24(3):223-233.
26. Srinivasaa V., Shivakumara V., Nayakaa V., Jagadeeshaiaiha S., Seethrama M., Shenoya R., et al. Fracture morphology of carbon fibre reinforced plastic composite laminates. Mater Res 2010, 13(3):417-424.
27. Jeff Wu C.F., Hamada M. Experiments: planning, analysis, and parameter optimization 2000, John Wiley & Sons, New York.
28. Silva L.J., Rubio J.C.C., Panzera T.H., Borges P.H.R. The effect of silica microparticles and maleic anhydride on the physic-mechanical properties of epoxy matrix phase. Sci Eng Compos Mater 2013, 20(3):203-208.
29. Voyiadjis G., Kattan P. Damage mechanics mechanical engineering 2005, Taylor & Francis.
30. Silani M., Ziaei-Rad S., Esfahanian M., Tan V.B.C. On the experimental and numerical investigation of clay/epoxy nanocomposites. Compos Struct 2012, 94:3142-3148.
31. Day R., Hewson K., Lovell P.A. Surface modification and its effect on the interfacial properties of model aramid-fibre/epoxy composites. Compos Sci Technol 2002, 62:153-166.
32. Tarantili P., Andreopoulos A. Mechanical properties of epoxies reinforced with chloride-treated aramid fibres. J Appl Polym Sci 1997, 65(2):267-276.
33. Wan Y.Z., Wang Y.L., Zhou F.G., Cheng G.X., Han K.Y. Three-dimensionally braided carbon fibre-epoxy composites, a new type of materials for osteosynthesis devices. ii. Influence of fibre surface treatment. J Appl Polym Sci 2002, 85(5):1040-1046.
34. Boynard C., Monteiro S., d'Almeida J.R.M. Aspects of alkali treatment of sponge gourd (luffa cylindrica) fibres on the flexural properties of polymer matrix composites. J Appl Polym Sci 2003, 87(12):1927-1932.
35. Kuntz M., Grathwohl G. Advanced evaluation of push-in data for the assessment of fibre reinforced ceramic matrix composites. Advan Eng Mater 2001, 3(6):371-379.
36. Beckert W., Lauke B. Critical discussion of the single-fibre pull-out test: does it measure adhesion. Compos Sci Technol 1997, 57:1689-1706.