Development of PLC-based software for increasing the dependability of production automation systems

IEEE Transactions on Industrial Informatics

Volumn 9, Issue 4, 2013, Pages 2397-2406

  Schutz, Daniel ^a   Wannagat, Andreas ^a   Legat, Christoph ^b   Vogel Heuser, Birgit ^a  

^a TECHNICAL UNIVERSITY OF MUNICH   (Germany)

^b SIEMENS AG   (Germany)

Author keywords

Agent based approaches; Model based system and software engineering; Production automation

Indexed keywords

AGENT-BASED APPROACH; APPLICATION DEVELOPMENT; APPLICATION EXAMPLES; IMPLEMENTATION APPROACH; INDUSTRIAL AUTOMATION; MANUFACTURING AUTOMATION; MODEL-BASED SYSTEMS; PRODUCTION AUTOMATION;

SOFTWARE ENGINEERING;

AUTOMATION;

EID: 84886700254     PISSN: 15513203     EISSN: None     Source Type: Journal    
DOI: 10.1109/TII.2012.2229285     Document Type: Article

References (62)

1. M. Cong, J. Zhang, and W. Qian, "Fault diagnosis system for automated assembly line," in Proc. IEEE ICIPS, 1997, pp. 1478-1482.
2. A. Wannagat and B. Vogel-Heuser, "Increasing flexibility and availability of manufacturing systems - Dynamic reconfiguration of automation software at runtime on sensor faults," in Proc. 9th IFAC IMS, 2008, pp. 381-386.
3. A. Wannagat and B. Vogel-Heuser, "Agent oriented software-development for networked embedded systems with real time and dependability requirements the domain of automation," in Proc. 17th IFAC World Congr., 2008, pp. 4144-4149.
4. IEC 61131, Second ed.: International Electrotechnical Commission Std..
5. B. Vogel-Heuser, Handbook of Automation. New York: Springer-Verlag, 2009, ch. Automation in wood and paper industry.
6. H. Thoemen, C. R. Haselein, and P. E. Humphrey, "Modeling the physical processes relevant during hot pressing of wood-based composites," in Holz als Roh- und Werkstoff, 2006, vol. 64, pp. 125-133.
7. IEC 61499 Function Blocks - Part 1: Architecture.: International Electrotechnical Commission Std..
8. V. Vyatkin, "IEC 61499 as enabler of distributed and intelligent automation: State-of-the-art review," IEEE Trans. Ind. Inf., vol. 7, no. 4, pp. 768-781, Nov. 2011.
9. W. Lepuschitz, A. Zoitl, M. Vallée, and M. Merdan, "Toward selfreconfiguration of manufacturing systems using automation agents," IEEE Trans. Syst.Man Cybern. C, Appl. Rev., vol. 41, no. 1, pp. 52-69, Jan. 2011.
10. D. Bruckner, H. Zeilinger, and D. Dietrich, "Cognitive automation - Survey of novel artificial general intelligence methods for the automation of human technical environments," IEEE Trans. Ind. Inf., vol. 8, no. 2, pp. 206-215, May 2012.
11. R. W. Brennan, "Toward real-time distributed intelligent control: A survey of research themes and applications," IEEE Trans. Syst. Man Cybern. C, Appl. Rev., vol. 37, no. 5, pp. 744-765, May 2007. (Pubitemid 47323547)
12. P. Leitão, V. Marik, and P. Vrba, "Past, present, and future of industrial agent applications," IEEE Trans. Ind. Informat., vol. PP, no. 99, pp. 1-1, 2012.
13. P. Vrba and V.Marik, "Capabilities of dynamic reconfiguration ofmultiagent- based industrial control systems," IEEE Trans. Syst. Man Cybern. A, Syst. Humans, vol. 40, no. 2, pp. 213-223, Feb. 2010.
14. P. Vrba, P. Tichy, V. Marik, K. H. Hall, R. J. Staron, F. P. Maturana, and P. Kadera, "Rockwell automation's holonic and multiagent control systems compendium," IEEE Trans. Syst. Man Cybern. C, Appl. Rev., vol. 41, no. 1, pp. 14-30, Jan. 2011.
15. Y. Alsafi and V. Vyatkin, "Ontology-based reconfiguration agent for intelligent mechatronic systems in flexible manufacturing," Robot. Comput.-Integr. Manuf., vol. 26, pp. 381-391, 2010.
16. M. Pechoucek, M. Rehak, P. Charvat, T. Vlcek, and M. Kolar, "Agent-based approach to mass-oriented production planning: Case study," IEEE Trans. Syst. Man Cybern. C, Appl. Rev., vol. 37, no. 3, pp. 386-395, Mar. 2007. (Pubitemid 46621541)
17. A. Lüder, A. Klostermeyer, J. Peschke, A. Bratoukhine, and T. Sauter, "Distributed automation: Pabadis versus HMS," IEEE Trans. Ind. Inf., vol. 1, no. 1, pp. 31-38, Feb. 2005. (Pubitemid 40541393)
18. A. W. Colombo, R. Schoop, and R. Neubert, "An agent-based intelligent control platform for industrial holonic manufacturing systems," IEEE Trans. Ind. Electron., vol. 53, no. 1, pp. 322-337, Jan. 2006. (Pubitemid 43245300)
19. M. Onori and J. Barata, "Evolvable production systems: New domains within mechatronic production equipment," in Proc. IEEE ISIE, 2010, pp. 2653-2657.
20. R. Frei and G. D. M. Serugendo, "Self-organizing assembly systems," IEEE Trans. Syst. Man Cybern. C, Appl. Rev., vol. 41, no. 6, pp. 885-897, Jun. 2011.
21. M. Vallée, M. Merdan, W. Lepuschitz, and G. Koppensteiner, "Decentralized reconfiguration of a flexible transportation system," IEEE Trans. Ind. Inf., vol. 7, no. 3, pp. 505-516, Aug. 2011.
22. M. Khalgui, O. Mosbahi, Z. Li, and H.-M. Hanisch, "Reconfiguration of distributed embedded-control systems," IEEE Trans. Mechatron., vol. 16, no. 4, pp. 684-694, Aug. 2011.
23. M. Khalgui and H.-M. Hanisch, "Reconfiguration protocol for multiagent control software architectures," IEEE Trans. Syst. Man Cybern. C, Appl. Rev., vol. 41, no. 1, pp. 70-80, Jan. 2011.
24. S. Theiss, V. Vasyutynskyy, and K. Kabitzsch, "Software agents in industry: A customized framework in theory and praxis," IEEE Trans. Ind. Inf., vol. 5, no. 2, pp. 147-156, May 2009.
25. M. Metzger and G. Polakw, "A survey on applications of agent technology in industrial process control," IEEE Trans. Ind. Inf., vol. 7, no. 4, pp. 570-581, Nov. 2011.
26. A. Romanenko, L. O. Santos, and P. A. Afonso, "Application of agent technology concepts to the design of a fault-tolerant control system," Control Eng. Practice, vol. 15, no. 4, pp. 459-469, 2007. (Pubitemid 46126719)
27. I. Seilonen, T. Pirttioja, and K. Koskinen, "Extending process automation systems with multi-agent techniques," Eng. Applicat. Artif. Intell., vol. 22, no. 7, pp. 1056-1067, 2009.
28. Y. S. Ng and R. Srinivasan, "Multi-agent based collaborative fault detection and identification in chemical processes," Eng. Applicat. Artif. Intell., vol. 23, no. 6, pp. 934-949, 2010.
29. C. H. Lo, Y. K. Wong, and A. B. Rad, "Intelligent system for process supervision and fault diagnosis in dynamic physical systems," IEEE Trans. Ind. Electron., vol. 53, no. 2, pp. 581-592, Feb. 2006.
30. C. H. Lo, E. H. K. Fung, and Y. K. Wong, "Intelligent automatic fault detection for actuator failures in aircraft," IEEE Trans. Ind. Inf., vol. 5, no. 1, pp. 50-55, Feb. 2009.
31. R. Debouk, S. Lafortune, and D. Teneketzis, "Coordinated decentralized protocols for failure diagnosis of discrete event systems," Discrete Event Dynam. Syst.: Theory Applicat., vol. 10, pp. 33-86, 2000. (Pubitemid 30573763)
32. L. Ferrarini,M. Allevi, and A. Ded, "A methodology for fault isolation and identification in automated equipments," in Proc. IEEE INDIN, 2011, pp. 157-162.
33. L. Ferrarini, M. Allevi, and A. Ded, "A real-time algorithm for fault identification in machining centres," in Proc. 18th IFAC World Congress, 2011, pp. 5201-5206.
34. F. Jammes and H. Smit, "Service-oriented paradigms in industrial automation," IEEE Trans. Ind. Inf., vol. 1, no. 1, pp. 62-70, Feb. 2005. (Pubitemid 40541397)
35. G. Cândido, A. W. Colombo, J. Barata, and F. Jammes, "Service-oriented infrastructure to support the deployment of evolvable production systems," IEEE Trans. Ind. Inf., vol. 7, no. 4, pp. 759-767, Nov. 2011.
36. J. Puttonen, A. Lobov, and J.M. Lastra, "Semantics-based composition of factory automation processes encapsulated by web services," IEEE Trans. Ind. Inf., vol. PP, no. 99, pp. 1-1, 2012.
37. T. Cucinotta, A. Mancina, G. F. Anastasi, G. Lipari, L. Mangeruca, R. Checcozzo, and F. Rusin, "A real-time service-oriented architecture for industrial automation," IEEE Trans. Ind. Inf., vol. 5, no. 3, pp. 267-277, Aug. 2009.
38. I. Estvez-Ayres, P. Basanta-Val, M. Garca-Valls, J. A. Fisteus, and L. Almeida, "QOS-aware real-time composition algorithms for servicebased applications," IEEE Trans. Ind. Inf., vol. 5, no. 3, pp. 278-288, Aug. 2009.
39. T. Cucinotta, L. Palopoli, L. Abeni, D. Faggioli, and G. Lipari, "On the integration of application level and resource level QoS control for realtime applications," IEEE Trans. Ind. Inf., vol. 6, no. 4, pp. 479-491, Nov. 2010.
40. M. Garcia-Valls, I. Rodriguez-Lopez, and L. Fernandez-Villar, "iland: An enhanced middleware for real-time reconfiguration of service oriented distributed real-time systems," IEEE Trans. Ind. Inf., vol. PP, no. 99, pp. 1-1, 2012.
41. L. Bassi, C. Secchi, M. Bonfè, and C. Fantuzzi, "A sysML-based methodology for manufacturing machinery modeling and design," IEEE Trans. Mechatron., vol. 16, no. 6, pp. 1049-1062, Dec. 2011.
42. K. Thramboulidis, "Model-integrated mechatronics - Toward a new paradigm in the development of manufacturing systems," IEEE Trans. Ind. Inf., vol. 1, no. 1, pp. 54-61, Feb. 2005. (Pubitemid 40541396)
43. C. Secchi, M. Bonfè, and C. Fantuzzi, "On the use of UML for modeling mechatronic systems," IEEE Trans. Autom. Sci. Eng., vol. 4, no. 1, pp. 105-113, 2007. (Pubitemid 46113506)
44. M. Witsch and B. Vogel-Heuser, "Towards a formal specification framework for manufacturing execution systems," IEEE Trans. Ind. Inf., vol. 8, no. 2, pp. 311-320, May 2012.
45. E. Estevez and M. Marcos, "Model-based validation of industrial control systems," IEEE Trans. Ind. Inf., vol. 8, no. 2, pp. 302-310, May 2012.
46. E. Estvez,M.Marcos, and D. Orive, "Automatic generation of PLC automation projects from component-based models," Int. J. Adv. Manuf. Technol., vol. 35, no. 5-6, pp. 527-540, 2007. (Pubitemid 350098197)
47. C. Fantuzzi, F. Fanfoni, C. Secchi, and M. Bonfè, "A design pattern for translating UML software models into IEC 61131-3 programming languages," in Proc. 18th IFAC World Congr., 2011, pp. 9158-9163.
48. V. Vyatkin, H.-M. Hanisch, C. Pang, and C.-H. Yang, "Closed-loop modeling in future automation system engineering and validation," IEEE Trans. Syst.Man Cybern. C, Appl. Rev., vol. 39, no. 1, pp. 17-28, Jan. 2009.
49. G. Cengic and K. Akesson, "On formal analysis of IEC 61499 applications, part a: Modeling," IEEE Trans. Ind. Inf., vol. 6, no. 2, pp. 136-144, May 2010.
50. T. Strasser, A. Zoitl, J. H. Christensen, and C. Sünder, "Design and execution issues in IEC 61499 distributed automation and control systems," IEEE Trans. Syst. Man Cybern. C, Appl. Rev., vol. 41, no. 1, pp. 41-51, Jan. 2011.
51. K. Andersson, B. Lennartson, and M. Fabian, "Restarting manufacturing systems; restart states and restartability," IEEE Trans. Autom. Sci. Eng., vol. 7, no. 3, pp. 486-499, Jul. 2010.
52. K. Andersson, B. Lennartson, P. Falkman, andM. Fabian, "Generation of restart states for manufacturing cell controllers," Control Eng. Practice, vol. 19, no. 9, pp. 1014-1022, 2011.
53. G.Acampora, J. M. Cadenas, V. Loia, and E. M. Ballester, "Achieving memetic adaptability by means of agent-based machine learning," IEEE Trans. Ind. Inf., vol. 7, no. 4, pp. 557-569, Nov. 2011.
54. D. Wang, "Robust data-driven modeling approach for real-time final product quality prediction in batch process operation," IEEE Trans. Ind. Inf., vol. 7, no. 2, pp. 371-377, May 2011.
55. A. K. Pani and H. K. Mohanta, "A survey of data treatment techniques for soft sensor design," Chemical Product Process Modeling, vol. 6, no. 1, 2011.
56. D. Wang, J. Liu, and R. Srinivasan, "Data-driven soft sensor approach for quality prediction in a refining process," IEEE Trans. Ind. Inf., vol. 6, no. 1, pp. 11-17, Feb. 2010.
57. L. Fortuna, S. Graziani, andM. G. Xibilia, "Comparison of soft-sensor design methods for industrial plants using small data sets," IEEE Trans. Instrum. Meas., vol. 58, no. 8, pp. 2444-2451, Aug. 2009.
58. A. K. Pani and H. K. Mohanta, "Application of soft sensors in process monitoring and control: A review," IUP J. of Sci. Technol., vol. 5, no. 4, pp. 7-20, 2009.
59. K. Y. Chan, S. Khadem, T. Dillon, V. Palade, J. Singh, and E. Chang, "Selection of significant on-road sensor data for short-term traffic flow forecasting using the Taguchi method," IEEE Trans. Ind. Inf., vol. 8, no. 2, pp. 255-266, May 2012.
60. R. Luo and C.-C. Chang, "Multisensor fusion and integration:A review on approaches and its applications in mechatronics," IEEE Trans. Ind. Inf., vol. 8, no. 1, pp. 49-60, Feb. 2012.
61. C. Caione, D. Brunelli, and L. Benini, "Distributed compressive sampling for lifetime optimization in dense wireless sensor networks," IEEE Trans. Ind. Inf., vol. 8, no. 1, pp. 30-40, Feb. 2012.
62. V. Dubinin and V. Vyatkin, "Semantics-robust design patterns for IEC 61499," IEEE Trans. Ind. Inf., vol. 8, no. 2, pp. 279-290, May 2012.